Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Supplier: Parker Hannifin / Seal Group
Description: for more information or other options. Hygienic Sanitary Gasket For Dairy Parker recommends its fully traceable, 3-A compounds for the dairy industry. Approved for high pressure fittings and featuring alignment tabs for easy installation; these gaskets require no
- Gasket Type: Other
- Material: Ethylene Propylene (EPDM), Fluoroelastomer (FKM - Viton®, Fluorel®, etc.), Nitrile (NBR - Buna-N), Silicone Rubber
-
Supplier: Mid-Mountain Materials, Inc.
Description: to laminate with foil or pressure-sensitive adhesive or apply a specialty coating for applications that require increased heat, abrasion, or chemical resistance. Applications Removable Insulation Blankets and Pads Oven and Door Seals Gaskets
- Features: Adhesive Backed
- Gasket Type: Edge Trim, Gasket Strip, Tadpole Gasket, Tape, Trim Seal, Window Gasket, Custom Gasket
- Material: Silicone Rubber, Other
-
Supplier: Chemac Inc./Uraca/Uhde HPT/Gather/BHDT
Description: Metal Gaskets For difficult sealing problems with large scale pipe forces and moments, high pressures, vacuum and/or high temperatures, for lowest leakage rate as well as for radially different expansion, the best possible solution from a technical viewpoint is the
-
-
Supplier: FTL Technology
Description: , Kammprofile gaskets, also known as Kammpro, provide solutions to a range of low-pressure sealing applications that require high-performance components. Used in a wide range of industries such as Transportation, Oil & Gas and Power Generation, some of the properties of
- Gasket Type: Other
- Material: Graphite, Polytetrafluoroethylene (PTFE, Teflon®, etc.)
- Maximum Operating Pressure: 5801 psi
- Operating Temperature: -328 to 1022 F
-
Supplier: Leader Global Technologies
Description: into every gasket with a high degree of consistency due to our recent development and implementation of automated winding and assembly equipment. Description: This gasket consists of the winding/sealing element and an inner ring. Product Data
- Gasket Type: Spiral Wound
-
Supplier: Leader Global Technologies
Description: Dimensions ASME B16.20 / ASME B16.47 Series A & B Gasket Dimensions Key Features: Industry standard sealing solutions for pressure piping and vessels in the chemical and refining markets. Advantages: The inner ring is added to
- Gasket Type: Spiral Wound
-
Supplier: Leader Global Technologies
Description: Key Features: Industry standard sealing solutions for pressure piping and vessels in the chemical and refining markets. Advantages: Gaskets are manufactured in accordance with all Global Industry Standards including ASME and EN/DIN. Leader assures
- Gasket Type: Spiral Wound
-
Supplier: Leader Global Technologies
Description: Leader GT Style S is a winding only gasket utilizing a wide array of sealing options including high purity inhibited grade flexible graphite, expanded PTFE, ceramic and LeaderTHERM for high temperature applications. Recently designed automated winding equipment assures
- Gasket Type: Spiral Wound
-
Supplier: Triangle Fluid Controls Ltd.
Description: surface conformity, chemical resistance, heat resistance, flame resistance, and radiation resistance. The high quality flexible graphite sealing element has a minimum 99.85% carbon content for critical nuclear applications. Durlon® Selex zero leakage gaskets are a creative
-
Supplier: Trelleborg Sealing Solutions Americas
Description: Our range of HMF FlatSeal™ best-in-class flat gaskets is designed to meet all flat sealing needs. These high performance materials are suitable for the widest range of temperatures and pressures and are compatible with virtually all chemicals.
- Gasket Type: Other
-
Supplier: FTL Technology
Description: gaskets are precision engineered to perform in high-temperature, high-pressure applications, providing resistance to virtually every known corrosive and toxic element. They are ideal for hydrocarbon processing and refining, petrochemical processing, chemical processing, power
- Gasket Type: Spiral Wound
- Material: Graphite, Other
- Maximum Operating Pressure: 14.5 to 580 psi
- Operating Temperature: -22 to 1832 F
-
Supplier: Triangle Fluid Controls Ltd.
Description: , etc. The Durtec™ gasket is designed to withstand high temperatures and pressures, to be blowout resistant, to be fire safe, and to resist toxic and/or corrosive chemicals. The design of the Durtec™ gasket also makes it an excellent choice for tough to seal cyclical
-
Supplier: CT Gasket & Polymer Co., Inc.
Description: . The type of gasket you need but cannot find, is the type of gasket that we make every day at CTG. Applications High temperatures High and low pressures Surfaces with a relatively large tolerance gap Static systems Corrosive environments
- Gasket Type: Sheet / Die-cut
- Material: Butyl, Neoprene, Nitrile (NBR - Buna-N), Other
-
Supplier: Thermoseal, Inc.
Description: Carbon Fiber Nitrile Binder High Temperature High Internal Pressure Good Steam Sheet Suitable for a Wide Range of Chemical Applications
- Material: Other
-
Supplier: Thermoseal, Inc.
Description: Synthetic Fiber Nitrile Binder High Temperature & Stress Fluctuating Temperatures & Pressures Vibration Low Carbon Steel Woven Mesh Insert
- Material: Other
-
Supplier: Triangle Fluid Controls Ltd.
Description: Durlon 8300 is our premium grade, multi-service high strength carbon and NBR gasket sheet, designed to handle the extremes of pressure and temperature. As with all of our premium products, the versatility of this sheet enables the end user to standardize on one sheet for a
-
Supplier: Triangle Fluid Controls Ltd.
Description: Durlon 9600 is an expanded PTFE gasket material designed to seal at low loads and resist creep and cold flow while being able to withstand high flange load and high pressures. Durlon 9600 will easily conform to irregular surfaces that may be warped, etched, pitted, or
-
Supplier: Chemence Inc.
Description: KG105 is a single component, thixotropic, low-medium strength, high temperature anaerobic gasket compound. KG105 cures rapidly when confined in the absence of air on close-fitting metal surfaces. KG105 will give an almost instant low-pressure seal (up to 0.5 Bar after 20 mins.)
- Applied Thickness / Gap Fill: 0.0197 inch
- Chemical / Polymer System Type: Specialty / Other
- Cure Type / Technology: Anaerobic, Single Component System, Two Component System
- Features: Gap Filling Sealant / FIP Gasket, Grease / Paste
-
Supplier: Accuris
Description: ELASTOMER FOR GASKETS WASHER PUMP, HIGH PRESSURE PUMP
-
Supplier: ACRO Manufacturing Industries Ltd.
Description: This material is extremely versatile because of its unusual combination of properties. All grades are lightweight, structurally strong, and moisture-resistant. High-pressure laminates do not soften appreciably under reapplication of heat, and their high dielectric strength and strength
- Gasket Type: Custom Gasket
- Material: Other
-
Supplier: Tooling Technology
Description: Ideal for pressure box and mold base seals. The thermoforming environment requires high-temperature durable seals. Our 70-durometer silicone rubber cord is extruded in H, A and O cross sections to meet your thermoforming tool-building requirements. Especially suited for
- Gasket Type: Gasket Strip
- Material: Silicone Rubber
-
Supplier: Tooling Technology
Description: Ideal for pressure box and mold base seals. The thermoforming environment requires high-temperature durable seals. Our 70-durometer silicone rubber cord is extruded in H, A and O cross sections to meet your thermoforming tool-building requirements. Especially suited for
- Gasket Type: Gasket Strip
- Material: Silicone Rubber
-
Supplier: Tooling Technology
Description: Ideal for pressure box and mold base seals. The thermoforming environment requires high-temperature durable seals. Our 70-durometer silicone rubber cord is extruded in H, A and O cross sections to meet your thermoforming tool-building requirements. Especially suited for
- Gasket Type: Gasket Strip
- Material: Silicone Rubber
-
Supplier: ACRO Manufacturing Industries Ltd.
Description: (Isobutylene-isopren e copolymer) rubber is predominately used for inner tubes of pneumatic tires and in vacuum and high pressure applications. It has excellent resistance to weathering, oxygen, heat and ozone. Temperature ranges from -37.2ºC to 82.2ºC (-35F to 180F).
- Gasket Type: Custom Gasket
- Material: Butyl
-
Supplier: Phelps Industrial Products
Description: protection to the filler material. A excellent choice for high pressure and temperature applications, especially that require extra bolting pressure.
- Gasket Type: Other
- Material: Aluminum, Copper, Steel, Other
- Maximum Operating Pressure: 150 to 2500 psi
-
Supplier: Tooling Technology
Description: The thermoforming environment requires high-temperature durable seals. Our 70-durometer silicone rubber cord is extruded in H, A and O cross sections to meet your thermoforming tool-building requirements. Especially suited for pressure boxes, our "H" seal forms tighter compression for
- Gasket Type: Gasket Strip
- Material: Silicone Rubber
-
Supplier: Phelps Industrial Products
Description: Phelps Style 9320, a double-jacketed gasket, has good compressibility and resilience and is perhaps the most popular jacketed gasket. This gasket is designed for high pressure and temperature applications including boiers, heat exchangers, high
- Gasket Type: Other
- Material: Aluminum, Copper, Steel, Other
- Maximum Operating Pressure: 150 to 2500 psi
- Thickness: 0.1250 inch
-
Supplier: Phelps Industrial Products
Description: This gasket sheet combines the high grade neoprene compound with strengthening insertions of Polyester. Ideal for high pressure diaphragm service in a variety of oils and petroleum media. Full rolls, part rolls and sheets are available
- Gasket Type: Sheet / Die-cut
- Material: Neoprene
- Operating Temperature: -20 to 190 F
- Thickness: 0.0625 to 0.2500 inch
-
Supplier: Saint-Gobain Tape Solutions
Description: Norseal reinforced solid silicone with fiberglass is a dimensionally stable, durable material for press pads, belting and gasketing. 4050 and is a thin, flexible and abrasion resistant for general purpose use and expansion joints. Applications: Flexible circuit boards Printed circuit boards
- Features: Color Options
- Material: Foam, Silicone Rubber
- Operating Temperature: -99.4 F
- Thickness: 0.0500 inch
-
Supplier: Saint-Gobain Tape Solutions
Description: Norseal reinforced solid silicone with fiberglass is a dimensionally stable, durable material for press pads, belting and gasketing. 4032 and is a thin, flexible and abrasion resistant for general purpose use and expansion joints. Applications: Flexible circuit boards Printed circuit boards
- Features: Color Options
- Material: Foam, Silicone Rubber
- Operating Temperature: -99.4 F
- Thickness: 0.0311 inch
-
Supplier: Saint-Gobain Tape Solutions
Description: : Flexible circuit boards Printed circuit boards Conveyor belts Expansion joint construction High pressure gaskets Duct work clamps
- Features: Color Options
- Material: Foam, Silicone Rubber
- Operating Temperature: -99.4 F
- Thickness: 0.0626 to 0.1252 inch
-
Supplier: Saint-Gobain Tape Solutions
Description: Biolink unilink 220 h+ is a double-sided adhesive tape with a PVC carrier. The modified acrylate adhesive is durable, pressure sensitive and offers high adhesive strength on low and high energy surfaces. The carrier film guarantees good processability of the materials to be
- Features: Adhesive Backed, Color Options
- Material: Foam, Polyvinyl Chloride (PVC)
- Operating Temperature: -40 F
- Thickness: 0.0093 inch
-
Supplier: Phelps Industrial Products
Description: Phelps Style 9322, a double-jacketed gasket with additional shell offers greater strength and rigidity to withstand higher compressive loads common in high pressure applications. Norminal gasket thickness is 1/8”, and the most popular material for this style is Copper or
- Gasket Type: Other
- Material: Aluminum, Copper, Steel, Other
- Maximum Operating Pressure: 150 to 2500 psi
-
Supplier: Accuris
Description: USE OF GASKETS IN HIGH PRESSURE MEDICAL OXYGEN CYLINDER SERVICE
-
Supplier: Accuris
Description: ELASTOMER FOR GASKETS WASHER PUMP/HIGH PRESSURE PUMP
-
Supplier: Technetics Group
Description: The ORIGRAF® seal provides a lasting high-performance sealing solution for all industries. It can be specifically designed for extreme thermal & pressure cycles ensuring higher safety in operation while optimizing total cost of ownership. Unlike flexible graphite cut gaskets,
- Material: Graphite
- Maximum Operating Pressure: 2900 psi
- Operating Temperature: -320 to 842 F
-
Supplier: Chemence Inc.
Description: KG185 is a single component, very high viscosity, thixotropic, medium strength, anaerobic gasket compound. KG185 cures rapidly when confined in the absence of air on close-fitting metal surfaces. KG185 will give an almost instant low-pressure seal (up to 0.5 Bar after 20 mins.)
- Applied Thickness / Gap Fill: 0.0197 inch
- Chemical / Polymer System Type: Specialty / Other
- Cure Type / Technology: Anaerobic, Single Component System, Two Component System
- Features: Gap Filling Sealant / FIP Gasket, Grease / Paste
-
Supplier: Accuris
Description: GUIDELINE FOR USE OF GASKETS IN HIGH PRESSURE MEDICAL OXYGEN CYLINDER SERVICE
-
Supplier: Precision Gasket Company
Description: Precision Gasket Company delivers innovative manufacturing solutions that meet the performance and quality demands of our regional, national, and global customers. It's something we've been doing now for over 60 years. We're more than just seals and gaskets. Our solutions also
- Die Cutting Method: Rotary Die Cutting, Steel Rule Die Cutting
- Location: North America, United States Only, Midwest US Only
- Materials: Electrical Insulating Material, EMI/RFI Shielded Foil / Laminate, Felt, Fiber / Cork / Paper, Foam / Sponge, Metals / Alloys, Plastics, Rubber, Composites
- Services Offered: Design Assistance, Prototype, Short Run Production, High Volume Production, Inspection / Quality Control
-
Supplier: Chemac Inc./Uraca/Uhde HPT/Gather/BHDT
Description: Based on the High-pressure valves and fittings to IG standards for pressure ratings of 325 and 700 bar, Chemac Inc offers these for pressure ratings of 500, 1600, 2500, 3200, 3600 and 4000 bar in similar construction with lens-type gaskets. Valves with other tie-in
-
Supplier: Clark Solutions
Description: measurement in hazardous environments. All wetted parts are made of welded stainless steel with no internal O-rings, gaskets or seals. These transmitters are available with a wide variety of pressure connections, ranges and electrical connections to suit most applications. All units
- Accuracy: 0.2500 ±% FS
- Electrical Output: Analog Current
- Features: Temperature Compensation
- Media: Liquid, Gas, Hazardous
-
Supplier: KROHNE Messtechnik
Description: – also in closed vessels. The pressure device features a ceramic capacitive measuring cell that guarantees maximum overload and vacuum resistance for high plant availability. The measuring cell can be built into the process absolutely flush and the radially recessed position of the
- Accuracy: 0.0500 to 0.2000 ±% FS
- Display: Digital
- Electrical Output: Analog Current, HART® Protocol, PROFIBUS®, FOUNDATION Fieldbus
- Features: Intrinsically Safe, Temperature Output, Negative Pressure Output
-
Supplier: Trim-Lok, Inc.
Description: Trim-Lok's Pedestal Seals combine a rigid pedestal and sponge rubber bulb. Pedestal Seals are custom designed to mate perfectly with your track creating a secure fit and seal. If you're not pairing with a track, Trim-Lok offers a pre-applied "3M" high strength tape system or standard
- Features: Adhesive Backed
- Gasket Type: Gasket Strip
-
Supplier: Tekscan, Inc.
Description: Tekscan high temperature pressure sensors can map the pressure distribution between two surfaces that are as hot as 200°C (400°F). High Temperature sensors are ideal for process/design improvement, machine set-up, and quality control. These flexible, 0.2 mm (0.008 in.)
- Category of Device: Sensor / Transducer
- Force Measured: Compression
- Operating Temperature: 400 F
- Sensor Output: Digital
-
Supplier: John Crane, Inc.
Description: Crane-Foil® is a premium-grade flexible graphite gasket material used in a wide range of services, where conventional gaskets will not withstand extreme temperature and/or pressures. Crane-foil gaskets feature the benefits of graphite, including resistance to most fluids,
- Construction: Multi-Braid or Lattice
- Cross Section: Square Cross Section
- Material Classification: Graphite
- Operating Pressure: 10000 psi
-
Supplier: Thermoseal, Inc.
Description: Thermoseal RG-N120 is a reinforced cellulose gasket material with a nitrile butadiene rubber binder and inorganic fillers that provides a very good crush resistance at high flange pressures. Continuous roll lengths allow efficient and economical fabrication with high
- Material: Other
-
Supplier: ASTM International
Description: 1.1 This practice provides a means of comparing various nonmetallic flat gasket materials, Classification F104, in saturated steam service under controlled conditions. While the practice is designed primarily for flat gaskets, it also can be applied to various form-in-place
-
Supplier: ASTM International
Description: 1.1 This practice provides a means of comparing various nonmetallic flat gasket materials, Classification F104, in saturated steam service under controlled conditions. While the practice is designed primarily for flat gaskets, it also can be applied to various form-in-place
-
Supplier: ASTM International
Description: 1.1 This practice provides a means of comparing various nonmetallic flat gasket materials, Classification F 104, in saturated steam service under controlled conditions. While the practice is designed primarily for flat gaskets, it also can be applied to various form-in-place
-
Supplier: Siemens Process Instrumentation
Description: Overview The pressure transmitter SITRANS P220 measures the gauge pressure of liquids, gases and vapors. Stainless steel measuring cell, fully welded Measuring ranges 2.5 to 600 bar (36.3 to 8702 psi) relative For high-pressure applications and refrigeration
- Accuracy: 0.2500 to 0.5000 ±% FS
- Electrical Output: Analog Voltage, Analog Current
- Features: Intrinsically Safe
- Media: Liquid, Gas, Hazardous
-
Supplier: Thermoseal, Inc.
Description: Thermoseal ML-5270 is a high performance synthetic fiber and polychloroprene binder gasket material that is resistant to refrigerants and oil mixtures. Its unique Multi-Layer Technology structure provides exceptional low flange pressure sealability with exceptional torque
- Material: Other
Find Suppliers by Category Top
Featured Products Top
-
adhesive backing. Learn more about gasket materials HERE. Rotary Die Cut Gaskets CFS has many high-speed, rotary die cutting (read more)
Browse Plastic Molding Services Datasheets for Custom Fabricating & Supplies -
pressure confinement at temperatures up to 600°F. Norseal Silicone Sponge Rubber Flexible, compressible NORSEAL silicone closed-cell sponge is designed for high performance Gasketing, thermal shielding, vibration mounts and press pads. It is available in six (read more)
Browse Elastomer and Rubber Shapes Datasheets for Saint-Gobain Tape Solutions -
The medical and pharmaceutical industries have strict requirements on medical devices and equipment, and seals play an important role in most of these devices. With today’s advanced medical procedures and treatments, seals and gaskets are exposed to the largest range of temperature (read more)
Browse Gaskets and Gasketing Datasheets for Arizona Sealing Devices, Inc. -
Engineered Materials, a subsidiary of PPG's aerospace division
Expanded Metals for gaskets & exhaust manifolds
High Temperature Gasket Substrate Dexmet expanded metals meet the demands of high temperature gaskets for exhaust manifolds. The variability of the expansion process allows designers to dial in a specific strength to the material (read more)
Browse Screens Datasheets for Engineered Materials, a subsidiary of PPG's aerospace division -
-, and large-volume runs are best suited to different die-cutting methods. For example, high-volume production volumes are best suited for CNC gasket die cutting. Packing and shipping method. Depending on run volume, a review of future packing (read more)
Browse Gaskets and Gasketing Datasheets for Arizona Sealing Devices, Inc. -
The Techcon TS941 High-Pressure Spool Valve provides precise shot accuracy with high volume capacity over a range of (read more)
Browse Dispensing Valve Systems Datasheets for Ellsworth Adhesives -
High frequency pressure waves Incomplete filling of pump chambers Uneven flow and pressure Pump friction and overheating Pump damage and premature failure (read more)
Browse Pulsation Dampeners Datasheets for Plast-O-Matic Valves, Inc. -
system integrated in the pump cover. Compensation areas in the flange and cover, insulated by special gaskets reinforced with anti-extrusion, allow for fully free axial and radial movement of the bushings, which is proportional to pump operating pressure. In this way, internal leakage is (read more)
Browse Gear Pumps Datasheets for jbj Techniques Limited -
-temperature seals as they utilize their sealing capabilities to reduce losses in energy. A lot of industries, including oil and gas, use high-temperature seals because they can maintain their sealing properties and performance at great pressures. High-temperature seals can also be applied in demanding (read more)
Browse Industrial Fabrics Datasheets for Mid-Mountain Materials, Inc. -
. The use of high temperature seals optimizes both quality and production, saves relining time, and, most importantly, ensures a sustainable potline operation. High temperature seals also allow effective sealing of furnace doors, which is crucial to maintain positive pressure inside the (read more)
Browse Gaskets and Gasketing Datasheets for Mid-Mountain Materials, Inc.
Conduct Research Top
-
Compressed Gasket Material Testing
Phelps Compressed Gasket Materials (our famous green sheet) have been extensively tested for pressure and high temperature performance. In particular, the green sheet has undergone two tests - the DIN 52913 and the Hot Compression Test both demonstrate the high temperature resistance of the gasket
-
All-Metal Valves: Angle and Inline Specifications
MDC bakeable all-metal angle and inline valves are designed for use in ultrahigh vacuum environments where elevated temperatures preclude the use of elastomers and low temperature gasket metals. These valves provide reliable high temperature seals from atmospheric pressures to below 10-11 Torr.
-
Viton O-Rings and Sealing Devices Guide
Viton is a versatile, inert alternative material for O-rings, gaskets, and other sealing components. The material is well-regarded for its resistance to chemical damage and its stability in high-temperature and high-pressure environments. Available formulations of Viton offer varying degrees
-
PROTECT YOUR INVESTMENT: Five factors to consider before making the switch to aftermarket oil
to provide benefits such as preventing oxidation, reducing friction, preventing wear under high-pressure. metal-to-metal contact or improving the efficiency of the compressor. Across the industry, many of these claims go. unsubstantiated. But one thing is certain: Unproven additives have
More Information Top
-
Oil hydraulic system
Between segments, a movable high pressure sealing becomes (spring-loaded sealed rollers) necessary that extends over a larger angle of rotation.
-
Oil hydraulic system
Between segments, a movable high pressure sealing becomes (spring-loaded sealed rollers) necessary that extends over a larger angle of rotation.
-
Water power projects band II
Similarly, the potential energy of large rock masses is served an already often published project of professor Heindl [4] also by this concept while a cylindrical rock of the earth is cut out and provided with a high pressure sealing .
-
Pumps and compressor for high pressures, strength, sealings, wear
Different construction forms of dynamic high pressure sealings are represented, and the stand of the development becomes erlautert.
-
Dubbel
High pressure sealings . a) DN little (tubes): (s.
-
Structural Analysis and Design of Process Equipment 2nd Edition
III High Pressure Gaskets .
-
Dubbel
Application: Oil, water, air, Glykogemische by -50 until +200 C and average pressures (rested for repeated use). high pressure sealings . a) DN little (tubes): (s.
-
Dubbel
High pressure sealings . a) DN little (tubes): (s.
-
Küttner piston machine
…variants of stuffing book packages and molding ring sets: a) packing rings; b) packing rings with flushing lantern; c) molding ring package with flushing lantern; d) packing rings with separately taut flushing lantern sealing; e) high pressure sealing set for 400 MPa…
-
Material morphology and electrical resistivity differences in EPDM rubbers
These included distributions of zinc oxide whiskers in high pressure gasket areas and cone‐shaped features rich in zinc, oxygen, and sulfur primarily in low pressure protruding gasket areas.