Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Supplier: Galco Industrial Electronics
Description: RS-232 to 422/485 Converter
-
Supplier: L-com, Inc.
Description: ,500 Volt isolation and 1,500 Watt surge protection. Includes DB9 female to screw terminal block adapter. SC-5VDC-PWR available (sold separately) Order online today! Features Used to convert RS-232 to RS-485/RS-422 2,500V Opto-Isolation External 5V DC power supply
- Primary Network: RS232/422/485
- Primary Port Connectors: DB-9
- Secondary Network: RS232/422/485
- Secondary Port Connectors: DB-9
-
Supplier: L-com, Inc.
Description: Control, no software drivers needed 2,500V Opto-Isolation Operating temp: -40C to +85C Application SCADA RS-232 RS-485 Industrial networking Serial communications
- Primary Network: RS232/422/485
- Primary Port Connectors: DB-9
- Secondary Network: RS232/422/485
- Secondary Port Connectors: DB-9
-
-
Supplier: Sonel Test
Description: OPTO-RS serial transmission cable. Dedicated to Sonel meters of MZC-301, MZC-303, MZC-303E, MRP-120, MRP-200, MIC-2500, MIC-1000 and MIE-500 series.
-
Supplier: L-com, Inc.
Description: -485 2,500V Opto-Isolation. External 5V DC power supply available, required for the RS-485/422 side only (sold separately) Automatic Send Data Control, no software drivers needed Operating temp: -40C to +85C Application SCADA RS-232 RS-485 Industrial networking
- Primary Network: RS232/422/485
- Primary Port Connectors: DB-9
- Secondary Network: RS232/422/485
- Secondary Port Connectors: DB-9
-
Supplier: Sealevel Systems, Inc.
Description: Sealevel’s 4103 Ethernet to serial server is the easiest way to connect a single RS-232, RS-422, or RS-485 serial port to your Ethernet network. The 4103 also includes a Reed relay output and an optically isolated input to allow remote control and monitoring of real world
- Connector: DB9
- Data Rate: 230 kbps
- Number of Ports: 1
- Operating Temperature: 0.0 to 70 C
-
Supplier: Black Box
Description: Great for linking older serial devices to computers or laptops with USB ports. Offers 2-wire RS-485 or 4-wire RS-422/RS-485 operation. Holds connections tight with its high-retention USB connector. USB 1.0, USB 1.1, and USB 2.0 compatible.
- Network / Bus: USB
- Serial Protocol: RS422, RS232/422/485
-
Supplier: Flexbar Machine Corporation
Description: Non-contacting linear SYLVAC Swiss measuring system. OPTO RS232C output for Direct connection to any RS232C computer port. One cable fits all DIGI-MET instruments. Available WedgeLink software utility to send measurements directly to Microsoft Excel or to your
- Type: Caliper
-
Supplier: Flexbar Machine Corporation
Description: Non-contacting linear SYLVAC Swiss measuring system. OPTO RS232C output for Direct connection to any RS232C computer port. One cable fits all DIGI-MET instruments. Available WedgeLink software utility to send measurements directly to Microsoft Excel or to your
- Type: Caliper
-
Supplier: Connect Tech Inc.
Description: Offers 4 ports configurable for RS-232/422/485
- Number of ports: 4
- Product Type: Bus Interface / Adapter Module, Serial Communication Module
- Technology: PCI
-
Supplier: Visual Sound, Inc.
Description: Black Box Network Services Extend your RS-485 network beyond 4000 feet - and add up to 31 more devices.
-
Supplier: Visual Sound, Inc.
Description: Black Box Network Services The perfect industrial line driver - speed, surge protection, and optical isolation, too.
-
Supplier: Galco Industrial Electronics
Description: SNAP 2-Ch RS-485/422 (2-wire or
-
Supplier: Brainboxes Limited
Description: PCI Express card providing four Opto Isolated RS422/485 serial ports. Data transfer rates up to 921,600 baud rates and the 128 byte deep transmit and 128 byte receive FIFOS, coupled with 1Mbit/s line drivers deliver uncompromising performance on your PC. Drivers for Windows 32 bit and
- Connector: DB9
- Data Rate: 922 kbps
- Network / Bus: Other
- Number of Ports: 4
-
Supplier: Brainboxes Limited
Description: PCI Express Card providing one opto isolated RS422/485 serial port. Data transfer rates up to 921,600 baud rates and the 128 byte deep transmitand 128 byte receive FIFOS, coupled with 1Mbit/s line drivers deliver uncompromising performance on your PC. Drivers for Windows 32 bit and 64
- Connector: DB9
- Data Rate: 922 kbps
- Network / Bus: Other
- Number of Ports: 1
-
Supplier: Brainboxes Limited
Description: Low profile PCI Express Card providing one opto isolated RS422/485 serial port. Data transfer rates up to 921,600 baud rates and the 128 byte deep transmitand 128 byte receive FIFOS, coupled with 1Mbit/s line drivers deliver uncompromising performance on your PC. Drivers for Windows 32
- Connector: DB9
- Data Rate: 922 kbps
- Network / Bus: Other
- Number of Ports: 1
-
Serial Communications Products - 4 Port RS422/485 PCI Serial Port Card With Opto Isolation -- UC-368Supplier: Brainboxes Limited
Description: Universal PCI providing four Opto Isolated RS422/485 serial ports with transient spike protection. Data transfer rates up to 921,600 baud rates and the 64 byte deep transmit and 64 byte receive FIFOS, coupled with 1Mbit/s line drivers deliver uncompromising performance on your
- Connector: DB9
- Data Rate: 922 kbps
- Network / Bus: PCI
- Number of Ports: 4
-
Supplier: Sealevel Systems, Inc.
Description: contact Sales for further information. The 7105-DB9 PCI serial interface is designed with a DB-9 connector pinned out compatible with AC24AT and AC422AT Opto-22 ISA bus cards. This allows Optomux devices to be controlled from PCs that do not have an ISA bus expansion slot available. The 7105
- Connector: DB9
- Data Rate: 461 kbps
- Network / Bus: PCI
- Number of Ports: 1
-
Supplier: Flexbar Machine Corporation
Description: Direct RS232C Opto-Electric Output Cable for all Digi-Met Direct output gaging: Includes 80" connecting cable with 9 pin IBM RS232C connector.
- Type: Caliper
-
Supplier: Renesas Electronics Corporation
Description: undriven (idle) bus. Rx outputs feature high drive levels - typically 15mA @ VsubOL/sub = 1V (to ease the design of opto-coupled isolated interfaces).brbr Half duplex (Rx inputs and Tx outputs multiplexed together) and full duplex pinouts are available. brbr For an RS-485 family with a
- Data Rate: 250 kbps
- Device Type / Applications: Transceiver
- IC Package Type: SOIC
- Supply Voltage: Other
-
Supplier: Renesas Electronics Corporation
Description: undriven (idle) bus. Rx outputs feature high drive levels - typically 15mA @ VsubOL/sub = 1V (to ease the design of opto-coupled isolated interfaces).brbr Half duplex (Rx inputs and Tx outputs multiplexed together) and full duplex pinouts are available. brbr For an RS-485 family with a
- Data Rate: 1000 kbps
- Device Type / Applications: Transceiver
- IC Package Type: SOIC
- Supply Voltage: Other
-
Supplier: Renesas Electronics Corporation
Description: The ISL31490E, ISL31491E, ISL31492E, ISL31493E, ISL31495E, ISL31496E, ISL31498E are fault protected, 5V powered, differential transceivers that exceed the RS-485 and RS-422 standards for balanced communication. The RS-485 transceiver pins (driver outputs and receiver inputs) are
- Data Rate: 250 kbps
- Device Type / Applications: Transceiver
- IC Package Type: SOIC
- Supply Voltage: Other
-
Supplier: Renesas Electronics Corporation
Description: The ISL31490E, ISL31491E, ISL31492E, ISL31493E, ISL31495E, ISL31496E, ISL31498E are fault protected, 5V powered, differential transceivers that exceed the RS-485 and RS-422 standards for balanced communication. The RS-485 transceiver pins (driver outputs and receiver inputs) are
- Data Rate: 15000 kbps
- Device Type / Applications: Transceiver
- IC Package Type: SOIC
- Supply Voltage: Other
-
Supplier: Data Connect Enterprise, Inc.
Description: Limits of Low RS-232 Power Internal or External Clocking, Set by External Switch Tri-State LED Status Indicators Both an RJ-11 Jack and Terminal Block Included Overview The Model 1070 AC Powered, Synchronous Short Range Modem is designed with three RS
-
Supplier: Micro-Epsilon Group
Description: The optoNCDT 2300 is the latest high-end model of laser triangulation sensors from Micro-Epsilon. The new series offers an adjustable measuring rate up to 49 kHz. An impressive and worldwide unique fact regarding this sensor class is that the electronics of the system have already been
- Linearity: 0.0300 ±% Full Scale
- Measurement Range: 0.1969 inch
- Operating Temperature: 32 to 122 F
- Technology: Optical Triangulation Position Sensor
-
Supplier: Micro-Epsilon Group
Description: performance). Unlike current high accuracy micrometers, the optoCONTROL 2520 can have the target positioned at any point in the gap rather than just a small ‚working position‘. This gives the user much more flexibility in use. Small objects with 0.5mm diameter can be reliably detected.
- Gaging Technology: Micrometer, Optical, Optical - Laser
- Graduation / Resolution: 3.94E-5 inch
- Mounting / Loading: Automatic / Inline, Benchtop / Floor, Machine Mounted
- Range: 1.81 inch
-
Supplier: Patton Electronics Co.
Description: Limits of Low RS-232 Power Internal or External Clocking, Set by External Switch Tri-State LED Status Indicators Both an RJ-11 Jack and Terminal Block Included Overview The Model 1070 AC Powered, Synchronous Short Range Modem is designed with three RS
-
Supplier: RS Components, Ltd.
Description: /O and communications processor. RS232 serial port Communication Interface = Serial Number of Ports = 1 Connection Port = RS232 Maximum Baud Rate = 100Mbit/s
- Data Rate: 100000 kbps
- Number of Ports: 1
- Serial Protocol: RS232
-
Supplier: RS Components, Ltd.
Description: /O and communications processor. RS232 serial port Communication Interface = Serial Number of Ports = 1 Connection Port = RS232 Maximum Baud Rate = 100Mbit/s
- Data Rate: 100000 kbps
- Number of Ports: 1
- Serial Protocol: RS232
-
Supplier: RS Components, Ltd.
Description: /O and communications processor. RS232 serial port Communication Interface = Serial Number of Ports = 1 Connection Port = RS232 Maximum Baud Rate = 100Mbit/s
- Data Rate: 100000 kbps
- Number of Ports: 1
- Serial Protocol: RS232
-
Supplier: RS Components, Ltd.
Description: Professional range of Opto 22 SNAP I/O module. The modules are designed to be mounted onto SNAP mounting racks and are ideal for high performance I/O solutions. Battery maintained realtime clock and calendar. Compact form factor Number of Ports = 1 Connection Port = RS232
- Data Rate: 100000 kbps
- Number of Ports: 1
- Serial Protocol: RS232
-
Supplier: Allied Electronics, Inc.
Description: SNAP LCM4 and LCSX industrial controllers work with SNAP I/O systems to provide powerful distributed control. The SNAP-LCM4 controls and communicates to I/O systems, serial devices, motion controllers and networks. Four expansion slots for Opto 22 M4-Series interface cards support Ethernet
- Computer Interface: Single Serial Interface
- Input: DC Input, Analog Input
- Mounting: DIN Rail
- Network: Other
-
Supplier: Opto 22
Description: The PCI-AC48 is an isolated, high-speed adapter card designed to link RS-485 serial devices, such as Opto 22's B3000 brains and B1/B2 brain boards, with computers using the Peripheral Component Interconnect (PCI) bus. This adapter card is ideal for customers who have been using
- Data Rate: 461 kbps
- Network / Bus: PCI
- Number of Ports: 2
- Operating Humidity: 0.0 to 95 %
-
Supplier: ACCES I/O Products, Inc.
Description: Features Completely configurable, asychronous serial port (ICOM-2S has two ports). Opto-Isolated against noisy environments Support conventional High-speed RS-422, and Multi-drop RS-485 Can be wired for 2 or 4 wire RS-422/485 communications
- Connector: DB9
- Network / Bus: Other
- Number of Ports: 2
- Serial Protocol: RS422, RS485
-
Supplier: Rochester Electronics
Description: Photovoltaic Isolator Solid-State Opto-Isolated MOSFET Gate Driver Dual-Channel, 5V
- Package Type: Other
- Transistor Type: MOSFET
-
Supplier: Tri-Tronics Company, Inc.
Description: For documentation and other X-PRO XPC models, please see our X-PRO XPC Marketing Page. Technical Features Model Specific Communication Type: RS-232 MODBUS RTU Optical Block: None LED Light
- Interface: Serial
- Operating Temperature: 32 to 158 F
- Output: Current
-
Supplier: Tri-Tronics Company, Inc.
Description: For documentation and other X-PRO XPC models, please see our X-PRO XPC Marketing Page. Technical Features Model Specific Communication Type: RS-232 MODBUS RTU Optical Block: None LED Light
- Beam: Infrared
- Interface: Serial
- Operating Temperature: 32 to 158 F
- Output: Current
-
Supplier: Tri-Tronics Company, Inc.
Description: For documentation and other X-PRO XPC models, please see our X-PRO XPC Marketing Page. Technical Features Model Specific Communication Type: RS-232 MODBUS ASCII Optical Block: None LED Light
- Beam: Infrared
- Interface: Serial
- Operating Temperature: 32 to 158 F
- Output: Current
-
Supplier: Tri-Tronics Company, Inc.
Description: For documentation and other X-PRO XPC models, please see our X-PRO XPC Marketing Page. Technical Features Model Specific Communication Type: RS-232 MODBUS ASCII Optical Block: None LED Light
- Interface: Serial
- Operating Temperature: 32 to 158 F
- Output: Current
-
Supplier: Allied Electronics, Inc.
Description: High-performance, flexible SNAP Ethernet brains are part of Opto 22's SNAP Ethernet systems, which let you connect to state-of-the-art Opto 22 industrial I/O hardware using a standard TCP/IP Ethernet connection. Combined with analog, digital, and special-purpose I/O modules on a
- Computer Interface: Single Serial Interface, Parallel Interface
- Expandable: Yes
- Input: DC Input, Analog Input
- Maximum Number of Channels: 16
-
Supplier: ACCES I/O Products, Inc.
Description: Features Watchdog timer to monitor computer systems Opto-Isolated RS-422/485 Serial Communications port Supports conventional High-speed RS-422, and Multi-drop RS-485 Can be wired for 2 or 4 wire RS-422/485 communications Supports RS-485
- Connector: DB25
- Network / Bus: Other
- Serial Protocol: RS422, RS485
-
Supplier: ACCES I/O Products, Inc.
Description: communications or RS485 communications. (The RS485 specification allows multiple transmitters and receivers to communicate over a two-wire "party line" bus.) Opto-isolators are incorporated on the card to provide isolation from common mode voltage that is present on the Tx, Rx,
- Connector: DB9
- Network / Bus: Other
- Serial Protocol: RS422, RS485
Find Suppliers by Category Top
Featured Products Top
-
The optoNCDT 1420LL laser sensors work with a small laser line rather than a laser point. This enables them to measure accurately even on rough, diffuse and shiny metallic surfaces. Their laser line ensures optical averaging and compensates for irregular surfaces. They achieve reliable, highly (read more)
Browse Optical Triangulation Position Sensors Datasheets for Micro-Epsilon Group -
enable reliable measurements on oily components in the construction of engines and transmissions as well as on coated materials, measurement objects behind glass or on film-sealed components. Data output is analog or digital via an RS422 interface. The optoNCDT 1750 also features a switching output (read more)
Browse Optical Triangulation Position Sensors Datasheets for Micro-Epsilon Group -
The optoNCDT 2300-2DR laser sensor is especially suitable for reflective and shiny targets. The sensor is for example used in thickness measurements of (read more)
Browse Optical Triangulation Position Sensors Datasheets for Micro-Epsilon Group
Conduct Research Top
-
Implementing a Simple Serial Mouse Controller
The mouse is becoming increasingly popular as a standard pointing data entry device. There is no doubt that the demand for the mouse is increasing. Various kinds of mice can be found in the market, including optical mice, opto-mechanical mice, and their close relative, trackballs. The mouse
More Information Top
Indicates content that may require registration and/or purchase.
-
Problems found during testing of SDH devices used for transmitting data between power systems line differential protections
differential OPTO RS232 .
-
Distance protections coordination using the exchange of binary signals in the IEC61850 protocol
differential OPTO RS232 .
-
New Mahr Federal Height Gage Offers Easy-To-Use Precision For Shop Floor Measurements
Data can be output via USB or OPTO RS232 .
-
Testers / Network / For Test
M9710 has got a 24 Vdc Aux connector for expansion signals, a USB port, a RS232 opto isolated port and a opto isolated port for industrial multi test stations networks.
-
Team Solutions, Inc.
IC232 - Single Port RS232 Opto -isolated Serial Communications PCMCIA Card .
-
Serial
IC232 - Single Port RS232 Opto -isolated Serial Communications PCMCIA Card .
-
Asynchronous / Serial / Cards
IC232 - Single Port RS232 Opto -isolated Serial Communications PCMCIA Card .
-
Asynchronous / Communication / Serial
IC232 - Single Port RS232 Opto -isolated Serial Communications PCMCIA Card .
-
Asynchronous / Serial Communications / RS-232
IC232 - Single Port RS232 Opto -isolated Serial Communications PCMCIA Card .
-
Communication
IC232 - Single Port RS232 Opto -isolated Serial Communications PCMCIA Card .