Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Supplier: Hapco, Inc.
Description: MINIFIL™ is a low cost, portable, two component dispensing machine specifically designed to dispense Hapco’s products. It is reliable and easy to use. Stainless Steel Tanks The MiniFIL’s tanks are constructed of Stainless Steel. This makes them
- Application: Adhesive / Silicone, Coatings / Paint
- Container Size: 22712 to 45425 cc
- Container Type: Can / Pail / Drum
- Dispensing Type: Fill ("Potting")
-
Supplier: Cammda Corporation
Description: Designed specifically for aircraft exterior touch-ups, CAMMDA's Paint Pax™ is a complete self contained system that stores, mixes and applies two-component paints and primers. Each Paint Pax™ kit consists of a pre-filled two component cartridge, an applicator gun and a
- Application: Coatings / Paint
- Container Type: Barrel / Syringe
- Dispensing Type: Bead
- Mounting: Hand Held
-
Supplier: Hapco, Inc.
Description: RAPIDSHOT™ is a low cost, handheld, two component dispensing system specifically designed to dispense Hapco’s products. RAPIDSHOT™ uses convenient disposable plastic cartridges and disposable RAPIDSHOT mixers. These cartridges are easily filled using the
- Application: Adhesive / Silicone, Coatings / Paint
- Container Size: 400 cc
- Container Type: Gun Handle
- Dispensing Type: Bead
-
-
Supplier: Techcon
Description: Techcon Systems bench-top dispensing robots are easy to program, simple to operate and compatible with all valve types and controllers. Designed and configured specifically for fluid dispensing applications, Techcon Systems robots provide total control over fluid placement
- Application: Adhesive / Silicone, Coatings / Paint, Other
- Container Type: Barrel / Syringe, Other
- Dispensing Type: Bead, Dot, Fill ("Potting")
- Mounting: Robotic
-
Supplier: Techcon
Description: Techcon Systems bench-top dispensing robots are easy to program, simple to operate and compatible with all valve types and controllers. Designed and configured specifically for fluid dispensing applications, Techcon Systems robots provide total control over fluid placement
- Application: Adhesive / Silicone, Coatings / Paint, Other
- Container Type: Barrel / Syringe, Other
- Dispensing Type: Bead, Dot, Fill ("Potting")
- Mounting: Robotic
-
Supplier: Techcon
Description: Techcon Systems bench-top dispensing robots are easy to program, simple to operate and compatible with all valve types and controllers. Designed and configured specifically for fluid dispensing applications, Techcon Systems robots provide total control over fluid placement
- Application: Adhesive / Silicone, Coatings / Paint, Other
- Container Type: Barrel / Syringe, Other
- Dispensing Type: Bead, Dot, Fill ("Potting")
- Mounting: Robotic
-
Supplier: Scheugenpflug, Inc.
Description: In electronics manufacturing, flexibility is the domain of universal systems, which allow a quick reaction to product changes. The Universal vacuum dispensing system, which usually features three motion axes and an automatic cup position, is the ideal solution for volume production of medium
- Application: Coatings / Paint, Other
- Dispensing Type: Fill ("Potting")
- Type: Dispense Only
-
Supplier: Nordson Corporation
Description: Touch screen control panel, easy troubleshooting, alarm equipped (1500psi)
- Application: Coatings / Paint, Other
- Container Type: Other
- Dispense Rate: Up to 16.01 L/min
- Metering Accuracy: 1 %
-
Supplier: Nordson Corporation
Description: Touch screen control panel, easy troubleshooting, alarm equipped (<100psi)
- Application: Coatings / Paint, Other
- Container Type: Other
- Dispense Rate: Up to 2 L/min
- Metering Accuracy: 1 %
-
Supplier: Scheugenpflug, Inc.
Description: Time can be a limiting factor for many reasons. This problem can be easily overcome with the VDS P(ower) vacuum dispensing system, which is usually equipped with three motion axes, an automatic cup position and a multi-piston dispenser (2 to 8 nozzles, depending on required performance; other
- Application: Coatings / Paint, Other
- Dispensing Type: Fill ("Potting")
- Type: Dispense Only
-
Supplier: Scheugenpflug, Inc.
Description: . Advantages Higher component reliability due to improved impregnation Reliable vacuum potting of big components Key features Heated dispensing unit and tubes Powerful vacuum pump for effective evacuation Intuitive operation with visualization UVISneo
- Application: Coatings / Paint, Other
- Dispensing Type: Fill ("Potting")
- Type: Dispense Only
-
Supplier: Scheugenpflug, Inc.
Description: traversing range, which enables the dispensing of adhesives and sealants as well as potting media on several parts in a single operation. Further characteristics are the high flexibility with regard to process and part parameters and the simple use of conveyor belts. Advantages
- Application: Coatings / Paint, Other
- Dispensing Type: Fill ("Potting")
- Type: Dispense Only
-
Supplier: Hapco, Inc.
Description: RAPIDFIL™ C Series is a portable, LCD computer controlled, 2 component dispensing machine specifically designed to dispense Hapco's products. It is reliable and easy to use. Current Applications for RAPIDFIL™ include: Liquid Molding
- Application: Adhesive / Silicone, Coatings / Paint
- Container Size: 22712 to 45425 cc
- Container Type: Can / Pail / Drum
- Dispensing Type: Fill ("Potting")
-
Supplier: Foshan RTSTEC Automation Co., Ltd
Description: precised glue dispensing. Adhesive epoxy dispensing system,AB glue dispensing equipment,liquid dispenser robot is for easy programming with teaching pendant, it is applicable for various glue types as Silicon,AB adhesive,epoxy resin adhesive, hot glue,transparent
- Applications: Assembly, Dispensing (e.g., Gluing, Sealing, Filling)
- Drive System: Electric, Pneumatic
- Number of Axes: 3 #
- Robot System: Yes
-
Supplier: Oil-Rite Corp.
Description: adjustable, reduced air pressure forces the liquid through piping to separate control valves for dispensing or spraying. Any liquid that flows can usually be sprayed, up to 1000 SSU viscosity at 100° F. The lighter the liquid, the easier it is to spray. The 2 ½ gallon painted steel
- Dispense Rate: 0.1894 L/min
- Type: Dispense Only
-
Supplier: Oil-Rite Corp.
Description: adjustable, reduced air pressure forces the liquid through piping to separate control valves for dispensing or spraying. Any liquid that flows can usually be sprayed, up to 1000 SSU viscosity at 100° F. The lighter the liquid, the easier it is to spray. The 5 gallon painted steel
- Dispense Rate: 0.1894 L/min
- Type: Dispense Only
-
Supplier: Oil-Rite Corp.
Description: adjustable, reduced air pressure forces the liquid through piping to separate control valves for dispensing or spraying. Any liquid that flows can usually be sprayed, up to 1000 SSU viscosity at 100° F. The lighter the liquid, the easier it is to spray. The 5 gallon painted steel
- Dispense Rate: 0.1894 L/min
- Type: Dispense Only
-
Supplier: Oil-Rite Corp.
Description: adjustable, reduced air pressure forces the liquid through piping to separate control valves for dispensing or spraying. Any liquid that flows can usually be sprayed, up to 1000 SSU viscosity at 100° F. The lighter the liquid, the easier it is to spray. The 2 ½ gallon painted steel
- Dispense Rate: 0.1894 L/min
- Type: Dispense Only
-
Supplier: Aervoe Industries Incorporated
Description: Plastic cover and stirring device fits onto any standard gallon paint can
- Application: Coatings / Paint
- Dispensing Type: Solid Stream, Other
- Mounting: Container Mounted
- Type: Mix and Dispense
-
Supplier: Carlisle
Description: Name: 98C-359 Multi-Color Outfit Part Number: 98C-359 Gun: Model 2100 Pump: no pump Tank: PT ASME Zinc Plated Lid/Shell Typical Application: 2 gallon outfit for Multi-Color paints. Order the Binks PT 78-K10 (10 pack
- Application: Coatings / Paint
- Container Type: Can / Pail / Drum
- Dispensing Type: Flat Spray, Round Spray
- Mounting: Container Mounted
-
Supplier: Generic Fluid Systems
Description: & surface Software that contains all historical data Multi-Mode dispense capabilities Uses Include: Paint manufacturing and tinting Wood stains and varnish Adhesives manufacturing Chemical blending and custom formulation Ink manufacturing and tinting Textile dyes manufacturing and
- Dispensing Application Type: Fill ("Potting")
- Media Viscosity: 0.0 to 7000 cps
- Mounting: Machine Mounted
- Shot Size: 47.32 to 832790 cc
-
Supplier: Foshan RTSTEC Automation Co., Ltd
Description: precised glue dispensing. Adhesive epoxy dispensing system,AB glue dispensing equipment,liquid dispenser robot is for easy programming with teaching pendant, it is applicable for various glue types as Silicon,AB adhesive,epoxy resin adhesive, hot glue,transparent
- Applications: Assembly, Dispensing (e.g., Gluing, Sealing, Filling)
- Drive System: Electric, Pneumatic
- Number of Axes: 3 #
- Robot System: Yes
-
Supplier: Aervoe Industries Incorporated
Description: Easy grip and trigger handle, for non-paint sprayable liquids
- Application: Cleaners / Sanitizers, Water
- Container Size: 651 cc
- Container Type: Bottle
- Dispensing Type: Other
-
Supplier: Carlisle
Description: psi (7 bar) Markets: Commercial Equipment General Industrial General Metal Miscellaneous Painter-Decorator-Co ntractor Recreational Vehicles Wood (Cabinets) Wood (Furniture) Wood (Other)
- Application: Coatings / Paint
- Container Type: Can / Pail / Drum
- Dispensing Type: Flat Spray, Round Spray
- Mounting: Container Mounted
-
Supplier: Carlisle
Description: , Custom wood shops Max Output Fluid Pressure: 1500 psi (21.7 bar) Markets: Adhesive Aviation & Aerospace Commercial Equipment Construction Corrosion Control General Industrial General Metal
- Application: Coatings / Paint
- Container Type: Can / Pail / Drum
- Dispensing Type: Flat Spray, Round Spray
- Mounting: Machine Mounted
-
Supplier: Carlisle
Description: furniture, Custom wood shops Max Output Fluid Pressure: 1500 psi (21.7 bar) Markets: Adhesive Aviation & Aerospace Commercial Equipment Construction Corrosion Control General Industrial General Metal
- Application: Coatings / Paint
- Container Type: Can / Pail / Drum
- Dispensing Type: Flat Spray, Round Spray
- Mounting: Machine Mounted
-
Supplier: Generic Fluid Systems
Description: The GRAVIMETRIX provides a complete range of automated fluid delivery solutions, from ingredient supply to the dispenser. When precision accuracy is vital this dispenser offers custom mix formulations accurately in exact batches, every time. Our dispense station components can be
- Dispensing Application Type: Fill ("Potting")
- Media Viscosity: 0.0 to 7000 cps
- Mounting: Machine Mounted
- Shot Size: 473 to 18927 cc
-
Supplier: Ellsworth Adhesives
Description: Fisnar VD510-UV diaphragm valve was engineered for precise flow control of low to medium viscosity liquids with a minimum shot size of 0.001 cc and is UV light blocking. The diaphragm separates the wetted parts from the moving parts; therefore, the valve is ideal for dispensing
- Type: Dispense Only
-
Supplier: Ellsworth Adhesives
Description: Fisnar VD510 diaphragm valve was engineered for precise flow control of low to medium viscosity liquids with a minimum shot size of 0.001 cc. The diaphragm separates the wetted parts from the moving parts; therefore, the valve is ideal for dispensing cyanoacrylates, reagents, electrolytes,
- Type: Dispense Only
-
Supplier: Ellsworth Adhesives
Description: Fisnar SV1000SS spray valve provides close tolerance spray dispensing of fluids of up to 1,000 cp. The SV1000SS is constructed of stainless steel to prevent corrosion from volatile materials. With a spray angle of 12 degrees and an operating frequency of 200 cycles/min, the SV1000SS is
- Type: Dispense Only
-
Supplier: ViscoTec Pumpen- u. Dosiertechnik GmbH
Description: The new and innovative precision-volume-dis penser eco-PEN700 made by ViscoTec offers a wide range of applications for low to medium-viscosity dispensing. preeflow® eco-PEN is a rotating and perfectly pressuretight displacement system. Self-sealing rotor/stator design
- Application: Adhesive / Silicone, Chemical (Corrosive / Solvent), Clean Room / Laboratory, Coatings / Paint, Colorant / Dies, Lubricants, Other
- Container Type: Barrel / Syringe
- Dispense Rate: 0.0053 to 0.0600 L/min
- Dispensing Type: Bead, Dot
-
Supplier: ViscoTec Pumpen- u. Dosiertechnik GmbH
Description: The new eco-PEN450 precision-volume dosing unit made by ViscoTec covers many applications within the low to medium-viscosity dispensing range. The preeflow® eco-PEN is a rotating, absolutely pressure-tight, positive displacement system with self-sealing rotor-stator arrangement. The
- Application: Adhesive / Silicone, Chemical (Corrosive / Solvent), Clean Room / Laboratory, Coatings / Paint, Colorant / Dies, Lubricants, Other
- Container Type: Barrel / Syringe
- Dispense Rate: 5.00E-4 to 0.0060 L/min
- Dispensing Type: Bead, Dot
-
Supplier: ViscoTec Pumpen- u. Dosiertechnik GmbH
Description: The new eco-PEN600 precision-volume dosing unit made by ViscoTec covers many applications within the low to medium-viscosity dispensing range. The preeflow® eco-PEN is a rotating, absolutely pressure-tight, positive displacement system with self-sealing rotor-stator arrangement
- Application: Adhesive / Silicone, Chemical (Corrosive / Solvent), Clean Room / Laboratory, Coatings / Paint, Colorant / Dies, Lubricants, Other
- Container Type: Barrel / Syringe
- Dispense Rate: 0.0014 to 0.0160 L/min
- Dispensing Type: Bead, Dot
-
Supplier: Generic Fluid Systems
Description: to ratio 2-component paints which combine a resin base with a catalyst in the proper ratio. A standard BATCHMETRIX could ratio up to 5 Resin colors plus the catalyst. Another use would be to ratio up to 6 ingredients to produce a finished batch of a single formula
- Dispensing Application Type: Fill ("Potting")
- Mounting: Machine Mounted
- Shot Size: 29.57 to 18927 cc
- Type: Meter, Mix and Dispense
-
Supplier: Nordson EFD
Description: MM781-SYS MicroMark Spray Marking System For inks and paints that do not require recirculation, this low-maintenance spray marking system provides consistent spray patterns that are easy to adjust. 781RC MicroMark Recirculating Spray Marking System Using a recirculating
- Application: Coatings / Paint, Other
- Dispensing Type: Round Spray
- Mounting: Machine Mounted
-
Supplier: Nordson EFD
Description: MM781-SYS MicroMark Spray Marking System For inks and paints that do not require recirculation, this low-maintenance spray marking system provides consistent spray patterns that are easy to adjust. 781RC MicroMark Recirculating Spray Marking System Using a recirculating
- Application: Coatings / Paint, Other
- Dispensing Type: Round Spray
- Mounting: Machine Mounted
-
Supplier: PVA - Precision Valve & Automation
Description: The FC100 is a front closing dispense valve. Both have a dual acting air cylinder to provide immediate start and stop of fluid flow, while a stroke adjustment can be used to fine tune the fluid flow rate. For the spray valve, a precision air regulator and gauge assembly is provided to
- Application: Adhesive / Silicone, Coatings / Paint, Foaming / Gasketing, Medical / Pharmaceutical
- Dispensing Type: Bead, Flat Spray, Round Spray
- Mounting: Hand Held
- Type: Dispense Only
Find Suppliers by Category Top
Featured Products Top
-
pattern. They combine liquid and compressed air to create a coating of liquid that can be easily adjusted to meet the needs of your application. With EXAIR’s 1/2 NPT large external mix atomizing nozzles, you can coat, cool, treat and paint a variety of products. Used with water (read more)
Browse Fluid Dispensing Equipment Datasheets for EXAIR -
precised glue dispensing. Adhesive epoxy dispensing system,AB glue dispensing equipment,liquid dispenser robot is for easy programming with teaching pendant, it is applicable for various glue types as Silicon,AB adhesive,epoxy resin adhesive, hot glue,transparent paint and for wide application of (read more)
Browse Robots Datasheets for Foshan RTSTEC Automation Co., Ltd -
Product Category:Fluid Dispensing Equipment Dispensing Equipment Type:Dispense Only Application:CoatingPaint; FuelOil; MedPharmaceutical; Reagent dispensing/filling, Glue dispensing for LED chip / semiconductor chip (read more)
Browse Metering Pumps Datasheets for Guangzhou Ascend Precision Machinery Co., Ltd. -
Equipment Type:Dispense Only Application:CoatingPaint; FoodBeverage; FuelOil; MedPharmaceutical; Lithium battery electrolyte injection, Reagent dispensing or filling, Contact lens dispensing, Flavor, essence and liquid vitamin additions Metering Accuracy:0.3000 % Dispensing Type:Fill ("potting") (read more)
Browse Metering Pumps Datasheets for Guangzhou Ascend Precision Machinery Co., Ltd. -
Equipment Dispensing Equipment Type:Dispense Only Application:CoatingPaint; FoodBeverage; FuelOil; MedPharmaceutical; Lithium battery electrolyte injection, Reagent (read more)
Browse Spray Valves Datasheets for Guangzhou Ascend Precision Machinery Co., Ltd. -
Dispensing Equipment Type:Dispense Only Application:CoatingPaint; FoodBeverage; FuelOil; MedPharmaceutical; Lithium battery electrolyte injection, Reagent dispensing or filling, Contact (read more)
Browse Liquid Handling Pumps Datasheets for Guangzhou Ascend Precision Machinery Co., Ltd. -
dispensing, ensuring accurate and reliable results. With its user-friendly programming interface and teaching pendant, this adhesive epoxy dispensing equipment is easy to operate and suitable for a wide range of glue types including Silicon, AB adhesive, epoxy resin adhesive, hot glue, and (read more)
Browse Robots Datasheets for Foshan RTSTEC Automation Co., Ltd -
, agriculture and lawn equipment, ink transfer, and paint spray systems. Suprene TPR tubing offers a number of advantages over other materials. The tubing is flexible and durable like rubber but typically lighter weight and more formable. It provides excellent resistance to flex fatigue and (read more)
Browse Rubber Tubing Datasheets for NewAge Industries -
. Versatile Applications: Compatible with various types of glue, such as silicone, AB glue, epoxy resin adhesive, hot glue, transparent paint, etc., widely used in industries like electronics and home appliances. Product Specifications (read more)
Browse Robots Datasheets for Foshan RTSTEC Automation Co., Ltd -
The Automatic Pallet Dispenser incorporates into our semi automatic bag filling systems and allows users to load or dispense pallets from any of three different axes. The system is highly configurable to fit the (read more)
Browse Palletizers and Depalletizers Datasheets for Spiroflow Systems, Inc.
Conduct Research Top
-
Application of Servo in Dispense
Dispenser specializes in the control of fluid, dripping the liquid, and coating it on the product surface or the automated machine within product, which can achieve three-dimensional, four-dimensional path dispensing, precise positioning, precision control glue, no wire, no leaking, no dripping
-
Peterbilt Batching Application
Mini-Flowmeter and Flowstar Batch Controller were installed just outside the paint booth. Manufacturer set Flowstar 2007 to close a valve after 31.5 ounces of solvent have been dispensed via a spray gun. The operator is then required to press a reset button in the paint booth before the next chassis
More Information Top
-
Computer graphics for engineers
A vector graphics is the practical conversion of the analytical geometry with that the lines on the output device are drawn ausnahmslos.
-
Medical image processing
Haptic in-/ output devices feature in the comparison to 2 D mouse or the 3 D Space ball (Abb. 9.40 right) that it can give a haptic force feedback coupling to the user (engl.: force-feedback).
-
Metering technique
The new dosing device generation draws itself through high .
-
6000 years mathematics
And finally treated Dürer the art of perspective drawing by other contemporaries and gave to obtain the perspective images mechanical devices [Scriba / recorder, 2.
-
Assured Automations Announces New VAX Valve - Cycle Life Extended By as Much as Ten Times Conventional Valves
Their products are used for fluid and gas applications in air drying, pollution control, process control, laundry equipment, textile dyeing & drying, bottling & dispensing equipment , ink & paint dispensing , industrial compressors, and others.
-
Assured Automation's Automated Valve Makes Waves Bringing National Recognition to Long Beach Parks Department
Their products are used for fluid and gas applications in air drying, pollution control, process control, laundry equipment, textile dyeing & drying, bottling & dispensing equipment , ink & paint dispensing , industrial compressors, and others.
-
Assured Automations Announces New RM-150
Their products are used for fluid and gas applications in air drying, pollution control, process control, laundry equipment, textile dyeing & drying, bottling & dispensing equipment , ink & paint dispensing , industrial compressors, and others.
-
Metering and Monitoring Water Consumption Across America's Golf Courses
Their products are used for fluid and gas applications in air drying, pollution control, process control, laundry equipment, textile dyeing & drying, bottling & dispensing equipment , ink & paint dispensing , industrial compressors, and others.
-
Hans Spemann as human and scientists
The amphibian germ shows sp / ~ testens after fertilization the prospective meaning of a part of the germ districts set already a differentiation through that andeutungsweise and a finely and the subscribed pattern of the organ installations is given to unseharf.
-
CR4 - Thread: Automatic Oil Paint Dispensing Unit
You might be interested in: Dispensing Valve Systems, Spray Painting Equipment ( Paint Sprayers), Adhesive Dispensing Equipment .