Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Supplier: Pentair Engineered Solutions
Description: Key Features Capacities to 100,000 GPM Heads to 100 feet Temperatures to 200° F Bowl Sizes from 6" to 60" diameter
- Maximum Discharge Pressure: 43.35 psi
- Maximum Discharge Flow: 100000 GPM
- Type of Pump: Centrifugal Pumps, Turbine Pumps
- Water Temperature: 200 F
-
Supplier: Hartell Pumps
Description: The LTA pumps are completely self contained units that are easy to connect directly to laundry tray tubs. Lightweight and compact, these models eliminate reservoirs, traps, extra fittings, and costly labor. This pump includes a pressure activated switch that turns on the pump
- Horsepower: 0.1250 HP
- Maximum Discharge Flow: 600 to 1650 GPM
-
Supplier: KSB AG
Description: Design Vertical tubular casing pump with mixed flow impeller, single-stage, with maintenance-free Residur shaft bearings, discharge nozzlearranged above or below floor. Applications Irrigation and drainage systems, stormwater pumping stations, hand ling of raw and
- Maximum Discharge Pressure: 145 psi
- Type of Pump: Centrifugal Pumps, Positive Displacement Pumps
- Water Temperature: 140 F
-
-
Supplier: KSB AG
Description: Design Vertical tubular casing pump with open mixed flow impeler. Pump inlet with bellmouth or suction elbow, pull-out design available, discharge nozzle arranged above or below floor, flanges to DIN or ANSI standards available. Applications Handling of raw, pure
- Horsepower: 6.7 HP
- Maximum Discharge Pressure: 131 psi
- Maximum Discharge Flow: 22.01 to 286 GPM
- Type of Pump: Centrifugal Pumps, Positive Displacement Pumps, Submersible Pumps, Sump Pumps
-
Supplier: KSB AG
Description: Vertical tubular casing pump with mixed flow propeller. Pump inlet with bellmouth or suction elbow, pull-out design available, discharge nozzle arranged above or below floor, flanges to DIN or ANSI standards available. Applications Handling of raw, pure, service and cooling
- Maximum Discharge Flow: 22.01 to 286 GPM
- Type of Pump: Centrifugal Pumps, Positive Displacement Pumps
- Water Temperature: 176 F
-
Supplier: KSB AG
Description: Design Vertical tubular casing pump with open or closed mixed flow impeller Applications Handling of seawater in desalination plants. Overview of technical data Type of bearing Plain bearings
- Horsepower: 10.05 HP
- Maximum Discharge Pressure: 232 psi
- Maximum Discharge Flow: 5.28 to 88.06 GPM
- Type of Pump: Centrifugal Pumps, Positive Displacement Pumps, Submersible Pumps, Sump Pumps
-
Supplier: Chemac Inc./Uraca/Uhde HPT/Gather/BHDT
Description: constant-speed electric motor. The hydraulic oil from the axial piston pump is alternately directed by a mechano-hydraulic four-way valve, which is hydraulically actuated by the moving plungers, to the two ends of a double-acting hydraulic cylinder whose piston rods are positively
- Type of Pump: Piston / Plunger Pumps, Positive Displacement Pumps
-
Supplier: ARGAL s.r.l.
Description: . Internal components are made of ceramic oxides, high density carbon, fluorinted elastomers; use of metallic part in direct contact with the liquid pumped is ruled out. Materials are selected and combined to deliver maximum performance, and make these pumps true"compact
- Discharge Size: 0.7500 to 1.25 inch
- Maximum Discharge Flow: 5 to 14 GPM
- Type of Pump: Centrifugal Pumps
- Water Temperature: -4 to 212 F
-
Supplier: ARGAL s.r.l.
Description: The KGK series Argal pumps of G3 group of dimensions , are centrifugal pumps designed for vertical installations, with column and volute casing submerged, dedicated mechanical support, motor mounted above the liquid to be pumped. These pumps generate semi axial
- Discharge Size: 1.57 to 3.94 inch
- Horsepower: 4 to 60 HP
- Maximum Discharge Flow: 264 to 1321 GPM
- Type of Pump: Centrifugal Pumps, Submersible Pumps, Sump Pumps
-
Supplier: General Pump
Description: KS SERIES Flows from 24.0 GPM to 59.7 GPM Patent-pending symmetrical power end featuring top and bottom mounting holes allowing for easy left to right shaft conversion Low-high pressure packing design with integrated cooling system High volumetric
- Discharge Size: 1.5 inch
- Horsepower: 75 HP
- Maximum Discharge Pressure: 2900 psi
- Maximum Discharge Flow: 38.2 GPM
-
Supplier: General Pump
Description: HF SERIES Flows from 8.1 GPM to 19.7 GPM Patent-pending symmetrical power end featuring top and bottom mounting holes allowing for easy left to right shaft conversion Low-high pressure packing design with integrated cooling system High volumetric efficient
- Discharge Size: 0.7500 inch
- Horsepower: 50 HP
- Maximum Discharge Pressure: 8700 psi
- Maximum Discharge Flow: 10.08 GPM
-
Supplier: General Pump
Description: HF SERIES Flows from 8.1 GPM to 19.7 GPM Patent-pending symmetrical power end featuring top and bottom mounting holes allowing for easy left to right shaft conversion Low-high pressure packing design with integrated cooling system High volumetric efficient
- Discharge Size: 0.7500 inch
- Horsepower: 48 HP
- Maximum Discharge Pressure: 5800 psi
- Maximum Discharge Flow: 12.4 GPM
-
Supplier: General Pump
Description: HF SERIES Flows from 8.1 GPM to 19.7 GPM Patent-pending symmetrical power end featuring top and bottom mounting holes allowing for easy left to right shaft conversion Low-high pressure packing design with integrated cooling system High volumetric efficient
- Discharge Size: 0.7500 inch
- Horsepower: 48 HP
- Maximum Discharge Pressure: 5800 psi
- Maximum Discharge Flow: 15 GPM
-
Supplier: Pentair Engineered Solutions
Description: Key Features Capacities to 50,000 GPM Heads to 2,000 feet Temperatures to 200° F Bowl Sizes from 4" to 57" diameter
- Housing Material: Stainless Steel
- Maximum Discharge Pressure: 867 psi
- Maximum Discharge Flow: 50000 GPM
- Media Temperature: 200 F
-
Supplier: Pentair Engineered Solutions
Description: Key Features Capacities to 50,000 GPM Heads to 2,000 feet Temperatures to 200° F Bowl Sizes from 4" to 57" diameter
- Housing Material: Stainless Steel
- Maximum Discharge Pressure: 867 psi
- Maximum Discharge Flow: 50000 GPM
- Media Temperature: 200 F
-
Supplier: ebm-papst Inc.
Description: continually circulated in beer tap units. They intake the fluid and direct it to the required location in accordance with the flow principle. Rotary pumps are used in air conditioners, beer taps, washing machines, condenser dryers, and in industrial applications. The advantages
- Type Of Pump: Positive Displacement Pumps, Rotary Vane Pumps
-
Supplier: EBARA Pumps Americas Corporation
Description: – standard construction for all services, providing maximum operating life Direct drive – pump and motor shafts are keyed for positive, reliable power transmission with no adjustments necessary “Flexible” floating outer casing – allows for thermal
- Discharge Size: 1.25 to 4 inch
- Horsepower: 0.5000 to 50 HP
- Maximum Discharge Pressure: 62.28 to 2145 psi
- Maximum Discharge Flow: 4 to 390 GPM
-
Supplier: Pentair Engineered Solutions
Description: Key Features Capacities to 50,000 GPM Heads to 2,000 feet Temperatures to 200° F Bowl Sizes from 4" to 57" diameter
- Housing Material: Stainless Steel
- Maximum Discharge Pressure: 867 psi
- Maximum Discharge Flow: 50000 GPM
- Media Temperature: 200 F
-
Supplier: Mar Cor Purification
Description: steel tubing and <25Ra wetted surfaces. All welds are visually inspected Tri-clamp connections aid in sanitary design Automatically adjusts product flow and reject flow based on feed water quality for water conservation. Two Pump VFD design for energy conservation
- Housing Material: Steel - Stainless
- Maximum Liquid Flow: 3 to 15 GPM
- Trigger: System
-
Supplier: Pump Solutions Group
Description: directly to the pump. No machining or any special drillings or tappings needed to retrofit pump. Ideal for water/wastewater, power and process industry applications...anywh ere that pump flow must be automatically proportioned or varied. Features • Stroke position
- Type Of Pump: Metering Pumps
-
Supplier: Gems Sensors & Controls
Description: including welders, lasers, etc. A J-box version with a 5 amp relay is also available for direct control of higher electrical loads, such as chlorinator pumps. Applications: Protect Bearings or Gears: oil separators, fuel systems, pumps, compressors, presses
- Liquid Volumetric Flow Rate: 0.2500 to 5 GPM
- Electrical Output: Switch
- End Fittings: Threaded
- Media Temperature Range: 0.0 to 212 F
-
Supplier: Cole-Parmer
Description: from direct sunlight to protect the internals circuits from heat build-up) • Verify flow rates with optional flow checker The optional flow checker can be mounted directly onto the discharge end of the pumps. The checker is a simple oval gear meter that measures
- Maximum Discharge Pressure: 100 psi
- Maximum Discharge Flow: 0.1400 GPM
- Power Source: AC Powered
- Pump Type: Diaphragm Pumps
-
Supplier: Cole-Parmer
Description: from direct sunlight to protect the internals circuits from heat build-up) • Verify flow rates with optional flow checker The optional flow checker can be mounted directly onto the discharge end of the pumps. The checker is a simple oval gear meter that measures
- Maximum Discharge Pressure: 140 psi
- Maximum Discharge Flow: 0.0898 GPM
- Power Source: AC Powered
- Pump Type: Diaphragm Pumps
-
Supplier: Cole-Parmer
Description: from direct sunlight to protect the internals circuits from heat build-up) • Verify flow rates with optional flow checker The optional flow checker can be mounted directly onto the discharge end of the pumps. The checker is a simple oval gear meter that measures
- Maximum Discharge Pressure: 100 psi
- Maximum Discharge Flow: 0.1400 GPM
- Power Source: AC Powered
- Pump Type: Diaphragm Pumps
-
Supplier: Cole-Parmer
Description: from direct sunlight to protect the internals circuits from heat build-up) • Verify flow rates with optional flow checker The optional flow checker can be mounted directly onto the discharge end of the pumps. The checker is a simple oval gear meter that measures
- Maximum Discharge Pressure: 60 psi
- Maximum Discharge Flow: 0.2008 GPM
- Power Source: AC Powered
- Pump Type: Diaphragm Pumps
-
Supplier: Arjay Engineering
Description: flow is tapped or pumped off the process line and directed through the HydroSense chamber. It passes behind the non-contacting UV light source and is targeted with filtered light energy. The soluble and emulsified oils in the water will excite from this light energy and
- Controller Functionality: Yes
- Display Type: Digital Display
- Electrical Output: Analog Current Output, Switch / Alarm Relay Output
- Extreme Environment: Yes
-
Supplier: Taco Comfort Solutions
Description: , high-flow Integral Flow Check (IFC®) that prevents gravity flow, reduces installation costs and improves pump performance. The stainless steel 0015 is ideal for high performance in domestic hot water applications. The 0010 3-Speed Service Pump is designed
- Type of Pump: Circulation Pumps
-
Supplier: Clark Solutions
Description: spikes is an available option. The pump can be connected to direct coupling motors with a stainless steel clamp or to M71 and M80 UNELMEC or NEMA 56C frame motors with optional coupling and adapter sets. PA pumps are NSF listed pumps for potable water and are
- Discharge Size: 0.3750 inch
- Housing Material: Stainless Steel
- Maximum Discharge Flow: 1.13 to 1.3 GPM
- Type Of Pump: Rotary Vane Pumps
-
Supplier: Taco Comfort Solutions
Description: -replaceable cartridge that contains all the moving parts. Replacing the cartridge rebuilds the circulator. Field service could not be faster or simpler to perform. Taco “00”® IFC Cartridge Circulators feature an Integral Flow Check (IFC) that eliminates the additional installation costs
- Discharge Size: 0.5000 to 1.5 inch
- Maximum Discharge Pressure: 125 psi
- Maximum Discharge Flow: 0.0 to 32 GPM
- Type of Pump: Circulation Pumps
-
Supplier: Taco Comfort Solutions
Description: . Compact, low power consumption design is ideal for high efficiency jobs. Features Integral Flow Check (IFC)--Eliminates In-Line Flow Check, Reduces Installed Cost, Easy to Service Improved Performance vs. In-Line Flow Checks Exclusive Anti
- Discharge Size: 0.7500 to 1.5 inch
- Maximum Discharge Pressure: 200 psi
- Type of Pump: Circulation Pumps
- Water Temperature: 40 to 240 F
-
Supplier: Watson-Marlow Fluid Technology Group
Description: -secure process protection: two levels of process set-up security Digital network control using RS485 Numeric keypad for direct entry of flow and pump settings Twin analogue inputs for simultaneous flow adjustment with two signals (supersedes diaphragm pumps'
- Discharge Size: 0.4724 to 0.6693 inch
- Housing Material: Plastic
- Maximum Discharge Pressure: 60 psi
- Maximum Discharge Flow: 2.64E-4 to 4.75 GPM
-
Description: most diverse inlet conditions • High self-priming speeds for maximized output flows & high altitude operation capability – increased productivity • Dedicated envelope design and unique port layout for direct mount on mobile transmission PTO’s – cost
- Housing Material: Cast Iron
- Maximum Discharge Pressure: 4600 to 5000 psi
- Maximum Discharge Flow: 79 GPM
- Media Temperature: -40 to 239 F
-
Supplier: Flomatic Valves
Description: DIRECT ACTING CONSTANT PRESSURE PUMP CONTROL VALVE WITH TAPPINGS - Reduces rapid pump cycling and maintains a pre-set operating pressure for pump systems. NPT threaded 1" female I.D. and 1-¼" male O.D. on inlet and outlet connections. Features a flow efficient
-
Supplier: Watson-Marlow Fluid Technology Group
Description: keypad for direct entry of flow and pump settings Twin analogue inputs for simultaneous flow adjustment with two signals (supersedes diaphragm pumps' stroke adjustment) Wide choice of metric or US flow units Easy calibration for precise metering
- Discharge Size: 0.2520 to 0.6693 inch
- Housing Material: Plastic
- Maximum Discharge Pressure: 60 psi
- Maximum Discharge Flow: 2.64E-4 to 4.22 GPM
-
Supplier: Thermocold Costruzioni Srl
Description: Multifunctional Air-Cooled unit with hot water production. • Semi-hermetic reciprocating compressor optimized for heat pump with innovative vapour injection system. • Direct drive double inlet centrifugal fans, statically and dynamically balanced. • Water side
- AC Voltage Required: 230 volts
- Applications: Other
- Fuel / Energy Source: Hot Water / Steam, Solar
- Heating Capacity: 5.1 to 8.2 kW
-
Supplier: Watson-Marlow Fluid Technology Group
Description: -10V or 0-1478Hz analogue speed feedback 620DuN As 620UN, plus: PIN-secure process protection: two levels of process set-up security Digital network control using RS485 Numeric keypad for direct entry of flow and pump settings
- Discharge Size: 0.4724 to 0.6693 inch
- Housing Material: Plastic
- Maximum Discharge Pressure: 30 psi
- Maximum Discharge Flow: 7.92E-4 to 3.43 GPM
-
Supplier: PressureParts.Com
Description: Performance-Proven engine with Low-Oil protection Direct drive triplex piston AR pump with ceramic plungers Thermal relief valve Adjustable pressure Stainless-steel and brass unloader In-line water strainer Forged brass manifold Dual
-
Supplier: Schutte & Koerting
Description: swimming pools, for direct fire attack, fire scene water management, accessing shallow static water, among others. Distant Water Source Situation Length of 5" Hose Lift Pump Discharge
-
Supplier: Flomatic Valves
Description: DIRECT ACTING CONSTANT PRESSURE PUMP CONTROL VALVE WITH TAPPINGS - Reduces rapid pump cycling and maintains a pre-set operating pressure for pump systems. Threaded female x female union ends or female I.D. & male O.D. on inlet and outlet connections. Features a
-
Supplier: Brooks Instrument
Description: type service, seal oil systems, bearing lubrication and cooling water indication, and offer o-ring seal construction with ten-to-one rangeability, as well as a wide range of float types and capacity ranges. The GT130x Seal Series flow meters provide an excellent and modular drop-in
- Gas Volumetric Flow Rate: 45 SCFM
- Liquid Volumetric Flow Rate: 10 GPM
- End Fittings: Threaded
- Media Temperature Range: 33 to 250 F
-
Supplier: Containment Solutions, Inc. (CSI)
Description: . Typical applications for Aboveground Oil/Water Separators are: Equipment Washdown/Vehicle Maintenance Facilities Water from washdown sources are contaminated with oil and/or grease from trucks, cars and other dirty equipment. Either through direct flow or pumping
- Capacity: 2000 gallons
- Primary Function: Oil Filtering / Removal
- Technology: Coalescing
- Total Flow: 200 GPM
-
Supplier: Valcor Engineering Corporation
Description: needed in the direction of flow for bubble tight sealing. Applications The SV11, SV12 series are suitable for a broad range of light industrial applications. Typical applications include: Vacuum pumps Water analysis Wafer cleaning for semiconductor
- Actuation: Electric
- Connection: Threaded
- Features: Single Solenoid, Normally Open (Open Center), Normally Closed (Closed Center)
- Media Description: Water (General), Wastewater
-
Supplier: Mixer Direct
Description: fluid motion to get a batch to complete uniformity. MixerDirect addresses that problem with the HFD line. Each blade has axial flow blades integrated into the geometry of the blade, providing extra flow for higher visocosity applications. Typically used in paints and inks, they
- Bore Size: 0.3750 inch
- Features: (Check all that apply): Adjustable Pitch, Anti-Static, Coated / Plated, Corrosion Resistant, Custom Fabricated, Multistage, Other
- Impeller Applications: Mixing, Pumping, Chemical, Heat Exchangers / Radiators, High Viscosity Media, Propulsion, Water / Wastewater, Other
- Impeller Materials: Aluminum, Brass / Bronze, Cast Iron, Composite, Plastic, Rubber, Stainless Steel, Titanium, Other
-
Supplier: Mixer Direct
Description: fluid motion to get a batch to complete uniformity. MixerDirect addresses that problem with the HFD line. Each blade has axial flow blades integrated into the geometry of the blade, providing extra flow for higher visocosity applications. Typically used in paints and inks, they
- Bore Size: 0.6250 inch
- Features: (Check all that apply): Adjustable Pitch, Anti-Static, Coated / Plated, Corrosion Resistant, Custom Fabricated, Multistage, Other
- Impeller Applications: Mixing, Pumping, Chemical, Heat Exchangers / Radiators, High Viscosity Media, Propulsion, Water / Wastewater, Other
- Impeller Materials: Aluminum, Brass / Bronze, Cast Iron, Composite, Plastic, Rubber, Stainless Steel, Titanium, Other
-
Supplier: Mixer Direct
Description: fluid motion to get a batch to complete uniformity. MixerDirect addresses that problem with the HFD line. Each blade has axial flow blades integrated into the geometry of the blade, providing extra flow for higher visocosity applications. Typically used in paints and inks, they
- Bore Size: 0.6250 inch
- Features: (Check all that apply): Adjustable Pitch, Anti-Static, Coated / Plated, Corrosion Resistant, Custom Fabricated, Multistage, Other
- Impeller Applications: Mixing, Pumping, Chemical, Heat Exchangers / Radiators, High Viscosity Media, Propulsion, Water / Wastewater, Other
- Impeller Materials: Aluminum, Brass / Bronze, Cast Iron, Composite, Plastic, Rubber, Stainless Steel, Titanium, Other
-
Supplier: Mixer Direct
Description: fluid motion to get a batch to complete uniformity. MixerDirect addresses that problem with the HFD line. Each blade has axial flow blades integrated into the geometry of the blade, providing extra flow for higher visocosity applications. Typically used in paints and inks, they
- Bore Size: 0.6250 inch
- Features: (Check all that apply): Adjustable Pitch, Anti-Static, Coated / Plated, Corrosion Resistant, Custom Fabricated, Multistage, Other
- Impeller Applications: Mixing, Pumping, Chemical, Heat Exchangers / Radiators, High Viscosity Media, Propulsion, Water / Wastewater, Other
- Impeller Materials: Aluminum, Brass / Bronze, Cast Iron, Composite, Plastic, Rubber, Stainless Steel, Titanium, Other
Find Suppliers by Category Top
Featured Products Top
-
the gas machine on remote or indoor applications. This powerful water jet generates 3000 psi at 8 gpm for plenty of drain cleaning power to break up tough stoppages and flush them away. And it has the highest flow rate available without requiring a trailer (read more)
Browse Hydroblasters and Water Blasters Datasheets for General Pipe Cleaners -
Flexible Control With DeZURIK Water hammer. Reverse Flow. Pump Backspin? Any number of conditions can cause expensive amage to pumps and piping systems. DeZURIK has been in the business of providing solutions to your pump system regulation needs for over 75 (read more)
Browse Check Valves Datasheets for DeZURIK, Inc. -
The Pick Variable Flow Heating System mixes medium-to-high pressure steam with cold water and delivers instantaneous hot water at a precisely controlled temperature over a wide range of water flows. It is used to accommodate wide variations in demand and frequent start (read more)
Browse Steam Injection Heaters Datasheets for Pick Heaters Inc. -
KNF N0150 diaphragm pumps can now be customized with water-cooled heads to prevent pump overheating in process applications where exothermic reactions from helium, xenon, and other gases may produce excessive heat and potentially shorten pump service life. They can ideally serve industries (read more)
Browse Diaphragm Pumps Datasheets for KNF Neuberger, Inc. -
and over 3,000 m3/h peak pumping speed are ideal for processes with high gas flow. Efficient Low cost of ownership, minimal maintenance, long service intervals, high uptime, high hydrogen throughput, low energy consumption, variable temperature control (read more)
Browse Vacuum Pumps and Vacuum Generators Datasheets for Busch Vacuum Solutions -
KNF announces the release of its latest filtration vacuum pumps, the N838 series. This pump is available in 22 LPM and 37 LPM capacities to provide the higher flow required of manifold filtration and other larger vessels. It is available in PPS (Ryton®) heads and PTFE-coated diaphragm for (read more)
Browse Vacuum Pumps and Vacuum Generators Datasheets for KNF Neuberger, Inc. -
KNF introduces a new solenoid-driven FL 10 diaphragm pump for OEM customers. With a nominal liquid flow rate of 100 mL/min, FL 10 features bi-directional flow-tightness without additional check valves, IP 65 protection, simple linear flow rate adjustment, a maintenance-free expected lifetime of (read more)
Browse Liquid Handling Pumps Datasheets for KNF Neuberger, Inc. -
Have a problem with failing double door style check valves ? Who doesn't! Want to prevent "water hammer" and "reverse flow" and have a tight shut-off? Sure you would! Why are you consistently specifying or replacing check valves that are costing you (read more)
Browse Check Valves Datasheets for DFT Inc. -
For laboratories or pilot operations, Picks pilot scale packages are sized for your needs. These pre-engineered turnkey systems generally utilize Pick's smallest heater, rated at capacities of up to 150 pounds of steam per hour and liquid flows as low as ½ gallon per minute. The (read more)
Browse Steam Injection Heaters Datasheets for Pick Heaters Inc. -
2852-DPM Dry Pump Monitor The 2852-DPM Dry Pump Monitor offers pipe monitoring for dry conditions to protect pumps and equipment. Combining the technology of capacitance with unique sensor designs provide non (read more)
Browse Pump Controllers Datasheets for Arjay Engineering
Conduct Research Top
-
MSilica Nanoparticles Treated by Cold Atmospheric-Pressure Plasmas Improve the Dielectric Performance of Organic-Inorganic Nanocomposites
Microfluidic mixing using contactless dielectrophoresis. The first experimental evidence of mixing enhancement in a microfluidic system using. contactless dielectrophoresis (cDEP) is presented in this work. Pressure-driven flow of. deionized water containing 0.5 mm beads was mixed in various
More Information Top
-
Development of oil inclusions under the action of chemical reagents on the reservoir
Distributions of pressure and oil saturation factor in an elliptical oil inclusion in a steady filtration regime (the pumped water flow direction is from left to right): (a) flow along the major axis of the ellipse; (b) flow along the minor axis …
-
http://www.int-res.com/articles/meps2006/322/m322p213.pdf
Periodical ventilation in C. bonelli was reported by Foster-Smith & Shillaker (1977), but the present study indicates that (although the amphipod frequently turns around in its tube, thereby reversing the flow direction ) water pumping activity of C. volutator in the presence …
-
Precision Coliform Water Bath 34 5 Liters 115V from Cole-Parmer
Yes, a water pump gently directs water flow around bath perimeter for non-turbulent agitation and temperature uniformity.
-
Eels and Humans
Nowadays with tightly fitting sluice doors, high- frequency pumps and water flows irregularly directed into the wetlands, virtually no eels can enter or leave Dutch waterways and polders.
-
Numerical and Experimental Study on Fluid Dynamic Features of Combined Gas and Electromagnetic Stirring in Ladle Furnace
Water pump direction : Air flow rate: Gas plug position, angle: Gas plug position, radius: .
-
Groundwater Annual Status Report for Fiscal Year 1998
This element will be modified to include the statement ‘ Water supply pumping affects flow directions in the aquifer near the supply wells.
-
Groundwater Annual Status Report for Fiscal Year 1999
Water supply pumping affects flow directions in the aquifer near supply wells.
-
Study on pneumatic-fuel hybrid system based on waste heat recovery from cooling water of internal combustion engine
After being heated, cooling water is directed by water pump to flow around the water jacket of pneumatic engine (the pneumatic engine prototype was re-designed from a diesel engine, and the water jacket was kept), and heat the cylinder wall.
-
Hierarchical Bayesian model averaging for hydrostratigraphic modeling: Uncertainty segregation and comparative evaluation
Heavy ground water pumping reversed the flow direction , which was originally southward, resulting in saltwater encroachment from south of the Baton Rouge fault [Rollo, 1969; Tomaszewski, 1996; Tsai, 2010].
-
Spatio‐temporal variation of gross CO2 and CH4 diffusive emissions from A ustralian reservoirs and natural aquatic ecosystems, and estimation of net reservoir ...
This sensor consists of a pump directing a constant water flow near a flat membrane.