Insulation Resistance Transformer Test Equipment
from SMC International
The transformers testing equipment ETP-2, is a unit that automatically performs the following measurements in all type of power, distribution, or instrument transformers: - Recovery Voltage of the insulation. - Insulation resistance. - Polarization Index. To measure these parameters, the unit... [See More]
- Test Parameters: Insulation Resistance; Time Constant, Recovery Voltage
- Form Factor: Rack Mount
- Phase: Three Phase
- Input Voltage: 115 to 230
from Microtest Corporation
Features. Basic accuracy up to 0.1%. User-friendly interface, high measurement speed. Innovative fixture zero-setting function to successfully prevent fixture interference from affecting the accuracy of measured values due to high test voltage. Paired with a 20-pin fixture to meet the test... [See More]
- Test Parameters: Capacitance; DC Resistance; Impedance; Impedance Phase Angle; Inductance; Insulation Resistance; Quality Factor; Turn Ratio
- Testing Frequency: 1.00E-5 to 0.2000
- Form Factor: Stand Alone / Bench
- Operating Humidity: 20 to 90
from Tinsley Precision Instruments
The Tinsley type 5867 uses a wound component's "Q" to give an indication of the quality of the component. It is used to compare the electrical characteristics between windings, either between a known good example and a unit under test or between phases of a three phase device. Although designed for... [See More]
- Test Parameters: Insulation Resistance; Quality Factor
- Form Factor: Stand Alone / Bench
- Phase: Three Phase
- Input Voltage: 90 to 260
from SMC International
ETP SYSTEM is a complete predictive maintenance instrument to detect the problems before unexpected failures appear in power transformers, autotransformers, and instrument transformers, reducing non-programmed shutdowns, transport, and catastrophic costs. The main objective of the ETP system, is to... [See More]
- Test Parameters: DC Resistance Match; Excitation Current; Impedance; Insulation Resistance; Turn Ratio; Time Constant, Recovery Voltage, Short Circuit Voltage Meter, Short Circuit Impedance
- Form Factor: Rack Mount
- Phase: Three Phase
- Input Voltage: 115 to 230
from Microtest Corporation
5435 transformer tester, test frequency is 20Hz~200kHz, 48 test points. By adopting innovative patent design, this tester is able to meet all your test requirements for multi-pin network communication transformer under the same volume condition. To prevent the fixture interference from affecting... [See More]
- Test Parameters: Capacitance; DC Resistance; Impedance; Impedance Phase Angle; Inductance; Insulation Resistance; Quality Factor; Turn Ratio
- Testing Frequency: 2.00E-5 to 0.2000
- Form Factor: Stand Alone / Bench
- Operating Humidity: 10 to 90