English Shaft Collars
Description
English Shaft Collars are mechanical components used to position and retain parts on a shaft. They are designed to fit around a shaft and can be secured in place to prevent movement along the shaft's axis. These collars are typically used in various mechanical systems to ensure that components remain in their designated positions.
Working Principle
Shaft collars work by clamping onto a shaft, either through a set screw or a clamping mechanism. The set screw type uses a screw that tightens against the shaft, while clamping collars use a split design that tightens around the shaft when the screws are fastened. This clamping action provides a secure grip, preventing axial movement of the collar and any attached components. The utility of shaft collars lies in their ability to provide precise positioning and retention of components, which is crucial in maintaining the alignment and functionality of mechanical systems.
Applications
Shaft collars are used in a variety of applications, including:
- Positioning Components: They are often used to position components such as bearings, sprockets, and pulleys on a shaft.
- Mechanical Stops: Shaft collars can act as mechanical stops, limiting the movement of components along a shaft.
- Spacer Elements: They can serve as spacers between components, ensuring proper alignment and spacing.
- Retaining Components: In some applications, shaft collars are used to retain components on a shaft, preventing them from sliding off.
Advantages over other Shaft Collars
One advantage of using shaft collars, particularly those with a coiled pin, is their ability to prevent hole damage due to the flexibility and force absorption of the coiled pin. This feature extends the lifetime of the assembly compared to other types of pins used in similar applications .
Limitations
Shaft collars, especially set screw types, can be bulky and expensive. Additionally, the set screw can dig into the shaft when tightened, potentially causing damage .
Considerations
When selecting shaft collars, consider the initial costs, which can be high due to the materials and manufacturing processes involved. Operating expenses may include maintenance and potential replacement costs if the shaft or collar becomes damaged. Durability is a key factor, as the collar must withstand the operational forces without deforming or slipping. Accuracy in positioning is crucial, and any misalignment can lead to mechanical failures. Regular inspection and maintenance are recommended to ensure the longevity and proper functioning of the shaft collars.
from Hangzhou Chinabase Machinery Co., Ltd.
China shaft collars manufacturer & exporter, we specialize in: solid shaft collars, single and double split collars, threaded bore split collars, inch Series shaft collars, Metric Series shaft collars, set Screw Style Collar. [See More]
- Units: English
- Width: 0.25 to 1.25
- Collar Material: Steel; Aluminum; Stainless Steel
- Bore: 0.188 to 4.000
from Stock Drive Products & Sterling Instrument - SDP/SI
Shafts are mechanical components, typically cylindrical in shape, used to transmit motion, torque, and/or power in any combination. They are also subject to lateral loads. These can be constant or fluctuating. The sizing of shafts, therefore, is usually determined as a function of... [See More]
- Units: English
- Bore: 0.125
- Width: 0.28
- O.D.: 0.43
from Chengdu Leno Machinery Co., Ltd.
Both Inch and Metric available. [See More]
- Units: English
- Collar Material: Steel; Aluminum; Stainless Steel
- Collar Type: Two piece Clamp Style
- Width: 0.25 to 0.88
from Hangzhou Chinabase Machinery Co., Ltd.
China shaft collars manufacturer & exporter, we specialize in: solid shaft collars, single and double split collars, threaded bore split collars, inch Series shaft collars, Metric Series shaft collars, set Screw Style Collar. [See More]
- Units: English
- Collar Material: Steel; Aluminum; Stainless Steel
- Collar Type: Hinge Shaft
- Width: 0.28 to 0.88
from Stock Drive Products & Sterling Instrument - SDP/SI
Shafts are mechanical components, typically cylindrical in shape, used to transmit motion, torque, and/or power in any combination. They are also subject to lateral loads. These can be constant or fluctuating. The sizing of shafts, therefore, is usually determined as a function of... [See More]
- Units: English
- Width: 0.12
- Collar Material: Stainless Steel; Stainless Steel
- Bore: 0.062
from Chengdu Leno Machinery Co., Ltd.
Material: Alu. Alloy, Steel and Stainless Steel;. Surface Treatment: Black finished for Steel. [See More]
- Units: English
- Collar Material: Stainless Steel
- Collar Type: One Piece Set Screw
- O.D.: 0.62 to 3.25
from Hangzhou Chinabase Machinery Co., Ltd.
China shaft collars manufacturer & exporter, we specialize in: solid shaft collars, single and double split collars, threaded bore split collars, inch Series shaft collars, Metric Series shaft collars, set Screw Style Collar. [See More]
- Units: English
- Collar Material: Steel; Aluminum; Stainless Steel
- Collar Type: Two piece Clamp Style
- Width: 0.28 to 0.88
from Stock Drive Products & Sterling Instrument - SDP/SI
Gear clamps are used to secure split hub gears and pulleys to a shaft. We offer one- and two-piece balanced precision and commercial-grade clamps with smaller clearance radii that work well in high-speed applications. They enable you to repeatedly remove and adjust the position of your part on a... [See More]
- Units: English
- Collar Material: Stainless Steel; 303 Stainless/None
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Bore: 0.100
from Chengdu Leno Machinery Co., Ltd.
Both Inch and Metric available. [See More]
- Units: English
- Collar Material: Steel
- Collar Type: One Piece Set Screw
- Width: 0.25 to 1.12
from Hangzhou Chinabase Machinery Co., Ltd.
China shaft collars manufacturer & exporter, we specialize in: solid shaft collars, single and double split collars, threaded bore split collars, inch Series shaft collars, Metric Series shaft collars, set Screw Style Collar. [See More]
- Units: English
- Collar Material: Steel
- Collar Type: Hinge Shaft
- Width: 1.38
from Stock Drive Products & Sterling Instrument - SDP/SI
Gear clamps are used to secure split hub gears and pulleys to a shaft. We offer one- and two-piece balanced precision and commercial-grade clamps with smaller clearance radii that work well in high-speed applications. They enable you to repeatedly remove and adjust the position of your part on a... [See More]
- Units: English
- Collar Material: Stainless Steel; 303 ST. ST./None
- Collar Type: Two piece Clamp Style
- Bore: 0.125
from Hangzhou Chinabase Machinery Co., Ltd.
China shaft collars manufacturer & exporter, we specialize in: solid shaft collars, single and double split collars, threaded bore split collars, inch Series shaft collars, Metric Series shaft collars, set Screw Style Collar. [See More]
- Units: English
- Collar Material: Steel; Aluminum; Stainless Steel
- Collar Type: Hinge Shaft
- Width: 0.28 to 0.75
from Stock Drive Products & Sterling Instrument - SDP/SI
Gear clamps are used to secure split hub gears and pulleys to a shaft. We offer one- and two-piece balanced precision and commercial-grade clamps with smaller clearance radii that work well in high-speed applications. They enable you to repeatedly remove and adjust the position of your part on a... [See More]
- Units: English
- Collar Material: Stainless Steel; 303 St. Steel/None
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Bore: 0.125
from Hangzhou Chinabase Machinery Co., Ltd.
China shaft collars manufacturer & exporter, we specialize in: solid shaft collars, single and double split collars, threaded bore split collars, inch Series shaft collars, Metric Series shaft collars, set Screw Style Collar. [See More]
- Units: English
- Collar Material: Steel; Stainless Steel
- Collar Type: Two piece Clamp Style
- Width: 0.28 to 0.75
from Stock Drive Products & Sterling Instrument - SDP/SI
Gear clamps are used to secure split hub gears and pulleys to a shaft. We offer one- and two-piece balanced precision and commercial-grade clamps with smaller clearance radii that work well in high-speed applications. They enable you to repeatedly remove and adjust the position of your part on a... [See More]
- Units: English
- Collar Material: Stainless Steel; 416 Stainless(Harden)/None
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.22
from Hangzhou Chinabase Machinery Co., Ltd.
China shaft collars manufacturer & exporter, we specialize in: solid shaft collars, single and double split collars, threaded bore split collars, inch Series shaft collars, Metric Series shaft collars, set Screw Style Collar. [See More]
- Units: English
- Collar Material: Steel
- Collar Type: Hinge Shaft
- Width: 0.34 to 0.62
from Stock Drive Products & Sterling Instrument - SDP/SI
Gear clamps are used to secure split hub gears and pulleys to a shaft. We offer one- and two-piece balanced precision and commercial-grade clamps with smaller clearance radii that work well in high-speed applications. They enable you to repeatedly remove and adjust the position of your part on a... [See More]
- Units: English
- Collar Material: Stainless Steel; 416 Stainless Harden
- Collar Type: Two piece Clamp Style
- Width: 0.29
from Stock Drive Products & Sterling Instrument - SDP/SI
Gear clamps are used to secure split hub gears and pulleys to a shaft. We offer one- and two-piece balanced precision and commercial-grade clamps with smaller clearance radii that work well in high-speed applications. They enable you to repeatedly remove and adjust the position of your part on a... [See More]
- Units: English
- Collar Material: Steel; Carbon Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.31
from Stock Drive Products & Sterling Instrument - SDP/SI
Gear clamps are used to secure split hub gears and pulleys to a shaft. We offer one- and two-piece balanced precision and commercial-grade clamps with smaller clearance radii that work well in high-speed applications. They enable you to repeatedly remove and adjust the position of your part on a... [See More]
- Units: English
- Collar Material: Stainless Steel; 416 Stainless Harden
- Collar Type: Two piece Clamp Style
- Width: 0.31
from Stock Drive Products & Sterling Instrument - SDP/SI
Gear clamps are used to secure split hub gears and pulleys to a shaft. We offer one- and two-piece balanced precision and commercial-grade clamps with smaller clearance radii that work well in high-speed applications. They enable you to repeatedly remove and adjust the position of your part on a... [See More]
- Units: English
- Collar Material: Steel; Carbon Steel / Cad.
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.31
from Triangle Manufacturing Company
At Triangle, our shaft collars are manufactured in three standard sizes (5/8 ”, 3/4 ”, 1 ”), but have customizable options for bores and plating. Used to ensure the shaft remains within its bearing, our shaft collars are most often purchased in association with our self-aligning... [See More]
- Units: English
- Width: 0.38
- Collar Type: One Piece Set Screw
- Bore: 0.625
from Stafford Manufacturing Corp.
ACME 1-Piece Threaded Collars are used on standard ACME threaded shafts, either left or right hand thread). They are perfect for applications such as stroke limiting, stops, and height and spring tensioning. Precision machined, they are non-marring, easy to adjust, with high clamping power. [See More]
- Units: English
- Collar Material: Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.50
from G.L. Huyett
Used like a single split collar, the two-piece design makes these easier to use on applications where access is limited. The opposing screws minimize vibration and increase variations of installation. [See More]
- Units: English
- Features: Opposing Screws
- Collar Type: Two piece Clamp Style
- Collar Material: Steel (optional feature); Aluminum (optional feature); Stainless Steel (optional feature)
from Whittet-Higgins Company
These CLAMP COLLARS are often adequate to position and lock to shaft cams, conveyor rolls, gears, pulleys, sheaves, sprocket and the multitude of other machine components where exacting adjustment is not required to transmit thrust and torque loads. They are great as adjustable shaft spacers or... [See More]
- Units: English; Metric (optional feature)
- Collar Material: Steel; Aluminum (optional feature); Stainless Steel (optional feature)
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.28
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. Available with keyways. Opposing screws for balance. RoHS2 and REACH Compliant. Width tolerance: +.003 ”/-.010 ”. Bore tolerance: +.002 ”/+.0005 ”. Temperature Range (Deg. F). Steel: -40 ° to 350... [See More]
- Units: English
- Features: Opposing Screws
- Collar Type: Two piece Clamp Style
- Collar Material: Steel; Aluminum; Stainless Steel; Nylon; Zinc Plated Steel
from Linn Gear Co.
The unique design of our Split Steel Shaft Collars is heavy duty, yet more compact than cast collars and easily assembled. Stocked in popular shaft sizes from 1 ″ through 5-15/16 ″ and with 2 Socket Setscrews. Other sizes and materials available made-to-order and quoted upon request. [See More]
- Units: English
- Collar Material: Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.62 to 1.38
from Climax Metal Products Company
One-Piece Clamping Collars are designed to handle applications that require a greater axial load capacity than Set Screw Collars without marring the shaft. Recessed screw styles of One-Piece Clamping Collars are available to provide safety with an outside surface free of major projections. CLIMAX... [See More]
- Units: English; Metric (optional feature)
- Collar Material: Steel; Aluminum; Stainless Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Bore: 0.125 to 4.000
from Specialized Marketing Intl., Inc.
If you need shaft collars / fasteners with real holding power you need GripFastTM. The patented device that can be removed or adjusted in seconds! With it's patented features and our computer analysis program we can design a GripFastTM to meet your specific needs. [See More]
- Units: English
- Bore: 0.125
- Collar Material: Plastic
- O.D.: 0.56
from Joint Way International, Inc.
Solid Shaft Collars [See More]
- Units: English
- Width: 0.25
- Collar Type: One Piece Set Screw
- Bore: 0.125
from Renbrandt, Inc.
Rectangular, 0.17 oz, Clamps are not furnished as part of the coupling and must be ordered separately [See More]
- Units: English
- Width: 0.38
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Bore: 0.250
from Princess Auto Limited
1 " Shaft Collar [See More]
- Units: English
- Bore: 1.000
- Collar Material: Steel
from Taper Line, Inc.
Threaded collars with set screws for secure locking. Outside diameter is knurled for hand assembly. Thread sizes range from 1/2"-13 to 2"-20. [See More]
- Units: English
- Collar Material: Steel
- Collar Type: One Piece Clamp Style Threaded Collar
- Width: 0.41 to 1.00
from Boston Gear
Overview. Boston Gear stocks a variety of clamping collars in different designs, including threaded, 1-piece and 2-piece styles, and materials, including nylon, steel, aluminum, and stainless steel. Such diversity is offered to ensure that the rapidly changing demands of every industry are met. [See More]
- Units: English
- Collar Material: Steel; Aluminum; Nylon
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Bore: 0.125 to 3.000
from HELI-CAL® Products Company, an MW Industries company
The A Series meets performance demands over a wide range of applications, including drive systems for encoders, instrumentation, lead screws, small pumps, feed rollers and anywhere a light to medium duty, torsionally flexible coupling/coupler is required. Helical's most popular coupling. An array of... [See More]
- Units: English
- Collar Material: Aluminum
- Collar Type: One Piece Set Screw (optional feature); One Piece Clamp Style (Non-Threaded) (optional feature); One Piece Clamp Style Threaded Collar (optional feature)
- Bore: 0.090 to 0.625
from Lucas Industrial
Clamp collars provide tighter fit with reduced risk of shaft damage [See More]
- Units: English
- Collar Material: Steel; Stainless Steel (optional feature)
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.31
from Stafford Manufacturing Corp.
ACME Threaded Collars are used on standard ACME threaded shafts, either left or right hand thread). They are perfect for applications such as stroke limiting, stops, and height and spring tensioning. The 2-Piece Clamp-Type design allows the collars to be completely disassembled and placed anywhere... [See More]
- Units: English
- Collar Material: Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.50
from G.L. Huyett
Standard-style (solid) shaft collars use a hardened set screw to penetrate the shaft so as to achieve grip. This penetration yields light-duty benefits for applications like thrust collars, arbor spacers, sprocket hubs, bearing holders, and shaft protectors. Solid collars do not work well when the... [See More]
- Units: English
- Collar Material: Steel (optional feature); Aluminum (optional feature); Stainless Steel (optional feature)
- Collar Type: One Piece Set Screw
- Width: 0.38 to 0.50
from Whittet-Higgins Company
These CLAMP COLLARS are often adequate to position and lock to shaft cams, conveyor rolls, gears, pulleys, sheaves, sprocket and the multitude of other machine components where exacting adjustment is not required to transmit thrust and torque loads. They are great as adjustable shaft spacers or... [See More]
- Units: English
- Collar Material: Steel; Aluminum (optional feature); Stainless Steel (optional feature)
- Collar Type: Two piece Clamp Style
- Width: 0.28
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Standard bearing lock-nut sizes. Clamp style increases holding power. Balanced styles available. Superior fit, finish and holding power. RoHS2 and REACH Compliant. Width tolerance: +.003 ”/-.010 ”. Bearing Face Max. TIR: .0005 ” for 00-06. .0010... [See More]
- Units: English
- Collar Material: Steel
- Collar Type: One Piece Clamp Style Threaded Collar
- Width: 0.34 to 0.62
from Linn Gear Co.
Stock sizes from 1/8 ″ through 3 ″ and with 1 Socket Setscrew. Other sizes and materials available made-to-order and quoted upon request. [See More]
- Units: English
- Collar Material: Stainless Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.25 to 1.12
from Climax Metal Products Company
Set Screw Collars are the most cost effective shaft collar design. Lightweight styles are available where an application has a space constraint. If additional load capacity is required, CLIMAX provides Set Screw Collars with a second screw at 90 º. Set Screw Collars are also available with a... [See More]
- Units: English; Metric (optional feature)
- Collar Material: Steel; Aluminum; Stainless Steel; Acetal
- Collar Type: One Piece Set Screw
- Bore: 0.062 to 5.938
from Joint Way International, Inc.
Split Shaft Collars, Double Split [See More]
- Units: English
- Width: 0.31
- Collar Type: Two piece Clamp Style
- Bore: 0.188
from Princess Auto Limited
1-1/2 " Shaft Collar [See More]
- Units: English
- Bore: 1.500
- Collar Material: Steel
from Boston Gear
Overview. The simplest, most economical style of shaft collar is a setscrew, which slides onto a shaft and is held into place by a setscrew. Three materials are used in the manufacturing of these collars; nylon which is USDA/FDA approved for use in food processing; zinc-plated steel for most... [See More]
- Units: English
- Collar Material: Steel; Stainless Steel; Nylon
- Collar Type: One Piece Set Screw
- Bore: 0.125 to 3.000
from HELI-CAL® Products Company, an MW Industries company
The DS Series was designed for today's high performance motion control systems. This Series incorporates two helical beams (double start) in each of two separate HELI-CAL Flexures (double flexure), combining greater end-to-end rotational accuracy with radial flexibility in one design. Available only... [See More]
- Units: English
- Collar Material: Aluminum
- Collar Type: One Piece Set Screw (optional feature); One Piece Clamp Style (Non-Threaded) (optional feature); One Piece Clamp Style Threaded Collar (optional feature)
- Bore: 0.188 to 0.750
from Stafford Manufacturing Corp.
Stafford ’s new Micro-Adjustable Positioning Collar assembly lets users make bi-directional adjustments along a shaft to precisely center and locate components. The Micro-Adjustable Positioning Collar assembly features two knurled collars which clamp directly to a shaft and have a hub... [See More]
- Units: English
- Collar Material: Steel
- Collar Type: Two piece Clamp Style
- Width: 1.50
from G.L. Huyett
Single split collars use friction to provide grip on bars and shafts. This method is generally considered to be more sturdy than the set screw design of solid collars. Single split collars are used on standard round shafts, hard or soft, as well as on thin wall tube or over a split hub. Easy to use,... [See More]
- Units: English
- Collar Material: Steel (optional feature); Aluminum (optional feature); Stainless Steel (optional feature)
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.62 to 0.69
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. Excellent for high axial loads. Transmit torque in confined spaces. Step bores available. Additional sizes available. RoHS2 and REACH Compliant. Width tolerance: +.003"/-.010". Bore tolerance: +.002"/+.0005". Temperature Range... [See More]
- Units: English
- Collar Material: Steel; Aluminum; Stainless Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.62 to 1.94
from Linn Gear Co.
Solid steel shaft collars from 1/8 ″ through 6 ″. 1/8 ″ through 3 ″ have 1 socket setscrew. Larger sizes have 2 socket setscrews [See More]
- Units: English
- Collar Material: Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.25 to 1.38
from Climax Metal Products Company
Threaded Clamping Collars fully engage the thread for secure locking. Threaded Clamping Collars with Recessed Screw styles provide a surface free of major projections for safety. CLIMAX Shaft Collars fit imperial shaft sizes from 1/16" through 6". Metric Shaft Collars fit shaft sizes ranging from... [See More]
- Units: English; Metric (optional feature)
- Collar Material: Steel; Stainless Steel
- Collar Type: One Piece Clamp Style Threaded Collar
- Bore: 0.188 to 2.000
from Joint Way International, Inc.
Split Shaft Collars, Single Split [See More]
- Units: English
- Width: 0.31
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Bore: 0.188
from Princess Auto Limited
1-1/4 " Shaft Collar [See More]
- Units: English
- Bore: 1.250
- Collar Material: Steel
from HELI-CAL® Products Company, an MW Industries company
The H Series coupling/coupler is ideal when high strength, excellent fatigue resistance and high torsional stiffness is called for in your application. The H Series' premium performance capability is designed for applications requiring a heavy-duty coupling, such as drive systems, small pumps and... [See More]
- Units: English
- Collar Material: Steel
- Collar Type: One Piece Set Screw (optional feature); One Piece Clamp Style (Non-Threaded) (optional feature); One Piece Clamp Style Threaded Collar (optional feature)
- Bore: 0.090 to 0.750
from Stafford Manufacturing Corp.
Balanced Shaft Collars have opposing screws to more evenly distribute weight and minimize vibration. 2-Piece Clamp-Type Shaft Collars are designed for use on standard round shafts, hard or soft, as well as on thin wall tube or over a split hub. They can be completely disassembled and placed anywhere... [See More]
- Units: English
- Collar Material: Steel
- Collar Type: Two piece Clamp Style
- Width: 0.38
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. Opposing hardware for balance. Excellent for high axial loads. Transmit torque in confined spaces. Step bores available. Additional sizes available. RoHS2 and REACH Compliant. Width tolerance: +.003"/-.010". Bore tolerance:... [See More]
- Units: English
- Features: Opposing Screws
- Collar Type: Two piece Clamp Style
- Collar Material: Steel; Stainless Steel
from Climax Metal Products Company
Two-Piece Clamping Collars are designed to handle applications that require greater axial load capacity than Set Screw Collars and One-Piece Clamping Collars without marring the shaft. Recessed screw styles of Two-Piece Clamping Collars are available to provide safety with an outside surface free of... [See More]
- Units: English; Metric (optional feature)
- Collar Material: Steel; Aluminum; Stainless Steel; Acetal
- Collar Type: Two piece Clamp Style
- Bore: 0.125 to 6.000
from Princess Auto Limited
1-1/8 " Shaft Collar [See More]
- Units: English
- Bore: 1.125
- Collar Material: Steel
from HELI-CAL® Products Company, an MW Industries company
This versatile series of couplings provides you with a full range of torque capacities and bore sizes, all with 1/32-inch parallel misalignment capability. These couplings attach to shafts with your choice of integral clamps or set screws. Combine this with optional keyways and the MC Series is... [See More]
- Units: English
- Collar Material: Steel (optional feature); Aluminum (optional feature)
- Collar Type: One Piece Set Screw (optional feature); One Piece Clamp Style (Non-Threaded) (optional feature); One Piece Clamp Style Threaded Collar (optional feature)
- Bore: 0.156 to 1.000
from Stafford Manufacturing Corp.
Stafford ’s new line of brass shaft collars provides a cost savings alternative to 316 stainless steel. Ideal for use with pumps, mixers, and impellers, they are a lower cost alternative to 316 stainless steel and are fully compatible with systems using brass components. Stafford Brass Shaft... [See More]
- Units: English
- Collar Material: Brass
- Collar Type: One Piece Clamp Style (Non-Threaded); Two piece Clamp Style
- Bore: 0.250 to 6.000
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. RoHS2 and REACH Compliant. Width tolerance: +.003 ”/-.010 ”. Bore tolerance: +.004"/-.000". Temperature Range: -40 °F to 350 °F [See More]
- Units: English
- Collar Material: Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 1.38
from Princess Auto Limited
1-3/8 " Shaft Collar [See More]
- Units: English
- Bore: 1.375
- Collar Material: Steel
from HELI-CAL® Products Company, an MW Industries company
The X-Series couplings offer a cost effective balance between couplings that are too stiff radially and those not stiff enough torsionally for servo-type applications. It features high torsional stiffness, low radial loads, one piece integrity, good flexibility, and zero backlash. Created for high... [See More]
- Units: English
- Collar Material: Steel (optional feature); Aluminum (optional feature)
- Collar Type: One Piece Set Screw (optional feature); One Piece Clamp Style (Non-Threaded) (optional feature); One Piece Clamp Style Threaded Collar (optional feature)
- Bore: 0.094 to 1.000
from Stafford Manufacturing Corp.
Chrome Plated Shaft Collars are ideal for use in consumer products such as fitness equipment and in medical and laboratory instruments where appearance and corrosion resistance are important. 1-Piece Clamp-Type Shaft Collars are designed for use on standard round shafts, hard or soft, as well as on... [See More]
- Units: English
- Collar Material: Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.25
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. Available with keyways. Opposing screws available. RoHS2 and REACH Compliant. Width tolerance: +.003 ”/-.010 ”. Bore tolerance: +.004"/-.000". Temperature Range: -40 °F to 350 °F [See More]
- Units: English
- Features: Opposing Screws
- Collar Type: Two piece Clamp Style
- Collar Material: Steel; Stainless Steel
from Princess Auto Limited
1/2 " Shaft Collar [See More]
- Units: English
- Bore: 0.500
- Collar Material: Steel
from Stafford Manufacturing Corp.
Stafford ’s full line of standard and custom, corrosion-resistant shaft collars and couplings is ideal for a wide range of on- and off-shore marine applications. Stafford Marine Service Collars and Couplings are machined from 303 and 316 stainless steel and brass; supplied with either 18-8 or... [See More]
- Units: English
- Collar Material: Stainless Steel; Brass
- Collar Type: Two piece Clamp Style
- Bore: 0.250 to 10.000
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. RoHS2 and REACH Compliant. Width tolerance: +.076mm/-.254mm. Bore tolerance: +.002 ”/+.0005 ”. Temperature Range (Deg. F). Steel: -40 ° to 350 °. Anodized Aluminum: -40 ° to 200 °. Stainless: -40... [See More]
- Units: English; Metric
- Collar Material: Steel; Aluminum; Stainless Steel; Nylon; Titanium
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.35 to 0.75
from Princess Auto Limited
1/4 " Shaft Collar [See More]
- Units: English
- Bore: 0.250
- Collar Material: Steel
from Stafford Manufacturing Corp.
The Stafford Flip-Lok ™ Quick Release Clamp Collar features a cam lever for clamping and a knurled nut for adjusting the clamping preset; making it easy to open-close and clamp by hand without tools. Suitable for use in horizontal and vertical applications as a clamp, stop, or spacer, simply... [See More]
- Units: English
- Collar Material: Aluminum
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.67
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. Available with keyways. Opposing screws available. RoHS2 and REACH Compliant. Width tolerance: +.076mm/-.254mm. Bore tolerance: +.002 ”/+.0005 ”. Temperature Range (Deg. F). Steel: -40 ° to 350 °. Anodized... [See More]
- Units: English; Metric
- Features: Opposing Screws (optional feature)
- Collar Type: Two piece Clamp Style
- Collar Material: Steel; Aluminum; Stainless Steel; Nylon; Titanium
from Princess Auto Limited
3/16 " Shaft Collar [See More]
- Units: English
- Bore: 0.188
- Collar Material: Steel
from Stafford Manufacturing Corp.
Stafford ’s line of case hardened shaft collars can withstand repeated high impact loads and maintain position in the face of constant, hard pounding. Hardened Shaft Collars are machined from steel in one- and two-piece clamp type styles and case hardened 0.032 ” deep to Rc 45 to provide... [See More]
- Units: English; Metric (optional feature)
- Collar Material: Steel
- Collar Type: One Piece Clamp Style (Non-Threaded); Two piece Clamp Style (optional feature)
- Bore: 0.500 to 1.000
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. RoHS2 and REACH Compliant. Width tolerance: +.003 ”/-.010 ”. Bore tolerance: +.002 ”/+.0005 ”. Temperature Range (Deg. F). Steel: -40 ° to 350 °. Zinc Plated Steel: -40 ° to 350 °. [See More]
- Units: English
- Collar Material: Steel; Aluminum; Stainless Steel; Nylon
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.28 to 0.88
from Princess Auto Limited
3/4 " Shaft Collar [See More]
- Units: English
- Bore: 0.750
- Collar Material: Steel
from Stafford Manufacturing Corp.
Stafford ’s new line of Heavy-Duty Mounting Collars are slotted to accept flat plate or screws for attachment to pipe and various flat surfaces. These collars feature wider bodies than conventional shaft collars and are available in three configurations: one has a slot on the bottom,... [See More]
- Units: English
- Collar Material: Steel; Stainless Steel (optional feature)
- Collar Type: One Piece Clamp Style (Non-Threaded); Two piece Clamp Style (optional feature)
- Width: 0.62 to 1.00
from Ruland Manufacturing Co., Inc.
Features. D-Bore provides additional holding power. Does not mar the shaft. Superior fit, finish, and holding power. RoHS and REACH Compliant. Width tolerance: +.003"/-.010". Bore tolerance: +.002 ”/+.0005 ”. Temperature Range (Deg. F). Steel: -40 ° to 350 °. Stainless Steel: -40... [See More]
- Units: English
- Collar Material: Steel; Stainless Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.28 to 0.50
from Princess Auto Limited
3/8 " Shaft Collar [See More]
- Units: English
- Bore: 0.375
- Collar Material: Steel
from Stafford Manufacturing Corp.
Exclusively stocked by Stafford, these collars fit on standard hexagonal shafts. They can be modified (drilled, tapped, welded, etc.) to act as mounts for other components. 1-Piece Clamp-Type Shaft Collars are precision machined, non-marring, easy to adjust, with high clamping power. Features: Used... [See More]
- Units: English
- Collar Material: Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.25
from Ruland Manufacturing Co., Inc.
Features. Hex-Bore provides additional holding power. Does not mar the shaft. Superior fit, finish, and holding power. RoHS2 and REACH Compliant. Width tolerance: +.003"/-.010". Bore tolerance: +.002 ”/+.0005 ”. Temperature Range (Deg. F). Steel: -40 ° to 350 °. Stainless Steel:... [See More]
- Units: English
- Collar Material: Steel; Aluminum; Stainless Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.34 to 0.41
from Princess Auto Limited
5/16 " Shaft Collar [See More]
- Units: English
- Bore: 0.312
- Collar Material: Steel
from Stafford Manufacturing Corp.
Stafford ’s new custom High Temperature Shaft Collars are designed for use in furnaces, ovens, conveyors and other equipment where they will be subjected to extreme temperatures up to 2,200 °F. Machined from Type 330 Stainless Steel and other customer specified high temperature alloys,... [See More]
- Units: English
- Collar Material: Stainless Steel
- Collar Type: One Piece Clamp Style (Non-Threaded); Two piece Clamp Style (optional feature)
- Bore: 0.500 to 10.000
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. No tools required. Designed for quick adjustments. Quick Clamp, Quick Release. Made from high quality aluminum. RoHS2 and REACH Compliant. Width tolerance: +.003 ”/-.010 ”. Bore tolerance: +.002 ”/+.0005 ”. Temperature Range: -40 °F to... [See More]
- Units: English
- Collar Material: Aluminum
- Collar Type: Hinge Shaft
- Width: 0.39 to 0.75
from Princess Auto Limited
5/8 " Shaft Collar [See More]
- Units: English
- Bore: 0.625
- Collar Material: Steel
from Stafford Manufacturing Corp.
Stafford ’s new edition to the hinged shaft collar line has an affixed handle which permits frequent removal and reassembly. Stafford ’s hinged collar with a swing-away clamp handle features a permanently joined handle that fits into a precision machined recess and seats securely when... [See More]
- Units: English
- Collar Material: Steel; Aluminum (optional feature); Stainless Steel (optional feature)
- Collar Type: Hinge Shaft
- Bore: 0.375 to 6.000
from Ruland Manufacturing Co., Inc.
Features. Forged socket set screws. RoHS2 and REACH Compliant. Width tolerance: +.003 ”/-.010 ”. Bore tolerances for SC styles: Up to 1 ”: +.0005 ” to +.002 ”. 1-1/16 ” to 3 ”: +.0005 ” to +.003 ”. 3-1/16 ” to 4 ”: +.0010 ” to... [See More]
- Units: English
- Collar Material: Steel; Aluminum; Stainless Steel; Nylon
- Collar Type: One Piece Set Screw
- Width: 0.25 to 1.12
from Princess Auto Limited
7/16 " Shaft Collar [See More]
- Units: English
- Bore: 0.438
- Collar Material: Steel
from Stafford Manufacturing Corp.
Stafford Instrument Quality Shaft Collars were developed to provide OEMs and designers of high quality equipment and medical instrumentation with alternatives to conventional shaft collars that are more precise, attractive and application-specific. Stafford IQ Shaft Collars feature one-piece... [See More]
- Units: English
- Collar Material: Stainless Steel
- Collar Type: One Piece Set Screw
- Bore: 0.250 to 6.000
from Ruland Manufacturing Co., Inc.
Features. Reduced width for confined spaces. Well suited for encoder applications. Light-weight. Does not mar the shaft. Superior fit, finish and holding power. Additional sizes available. RoHS2 and REACH Compliant. Width tolerance: +.003"/-.010". Bore tolerance: +.002"/+.0005". Temperature Range... [See More]
- Units: English
- Collar Material: Aluminum; Stainless Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.22 to 0.47
from Princess Auto Limited
7/8 " Shaft Collar [See More]
- Units: English
- Bore: 0.875
- Collar Material: Steel
from Stafford Manufacturing Corp.
Hub collars feature a precision-machined hub on the face that limits the contact area, minimizing friction. It is ideally suited as a bearing inner-race. 1-Piece Clamp-Type Shaft Collars are designed for use on standard round shafts, hard or soft, as well as on thin wall tube or over a split hub. [See More]
- Units: English
- Collar Material: Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.41
from Ruland Manufacturing Co., Inc.
Features. Reduced width for confined spaces. Well suited for encoder applications. Light-weight. Does not mar the shaft. Superior fit, finish and holding power. Additional sizes available. RoHS2 and REACH Compliant. Width tolerance: +.003"/-.010". Bore tolerance: +.002"/+.0005". Temperature Range... [See More]
- Units: English
- Features: Opposing Screws
- Collar Type: Two piece Clamp Style
- Collar Material: Aluminum; Stainless Steel
from Princess Auto Limited
9/16 " Shaft Collar [See More]
- Units: English
- Bore: 0.562
- Collar Material: Steel
from Stafford Manufacturing Corp.
1-Piece Clamp-Type Shaft Collars are for use on standard round shafts, hard or soft, as well as on thin wall tube or over a split hub. Precision machined, non-marring, easy to adjust, with high clamping power, they are stocked in the following materials: Steel, Stainless Steel, Aluminum, Nylon ,... [See More]
- Units: English
- Collar Material: Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.25
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Acme, Left-hand and metric threads available. Superior fit, finish and holding power. RoHS2 and REACH Compliant. Width tolerance: +.003 ”/-.010 ”. Temperature Range (Deg. F). Steel: -40 ° to 350 °. Stainless: -40 ° to 350 ° [See More]
- Units: English
- Collar Material: Steel; Stainless Steel
- Collar Type: One Piece Clamp Style Threaded Collar
- Width: 0.28 to 0.75
from Stafford Manufacturing Corp.
Remachineable Couplings are complete, except that they are supplied with a precision finished bore on one side and a pilot hole only on the other. They are designed to connect two dissimilar sized shafts in virtually any combination up to a 2 ” bore and maintain concentricity between each... [See More]
- Units: English
- Collar Material: Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.41
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. Available with keyways (SPK Series). Opposing screws available (SPB Series). RoHS2 and REACH Compliant. Width tolerance: +.003 ”/-.010 ”. Bore tolerance: +.002 ”/+.0005 ”. Temperature Range (Deg. F). [See More]
- Units: English
- Collar Material: Steel; Aluminum; Stainless Steel; Nylon; Zinc Plated Steel
- Collar Type: Two piece Clamp Style
- Width: 0.28 to 0.88
from Stafford Manufacturing Corp.
Face Mounting Shaft Collars have universal tapped mounting holes, allowing multiple options for mounting components to the collar. 1-Piece Clamp-Type Shaft Collars are for use on standard round shafts, hard or soft, as well as on thin wall tube or over a split hub. They are precision machined,... [See More]
- Units: English
- Collar Material: Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.49
from Ruland Manufacturing Co., Inc.
Features. D-Bore provides additional holding power. Does not mar the shaft. Superior fit, finish, and holding power. RoHS2 and REACH Compliant. Width tolerance: +.003"/-.010". Bore tolerance: +.002 ”/+.0005 ”. Temperature Range (Deg. F). Steel: -40 ° to 350 °. Stainless Steel:... [See More]
- Units: English
- Collar Material: Steel; Stainless Steel
- Collar Type: Two piece Clamp Style
- Width: 0.28 to 0.50
from Stafford Manufacturing Corp.
316 Stainless Steel Shaft Collars are ideal for applications requiring exposure to harsh chemicals, corrosives, solvents or frequent wash-downs. They are designed for use in mixing equipment, drive systems, flow control instruments, and related machinery. Applications include medical,... [See More]
- Units: English
- Collar Material: Stainless Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.41
from Ruland Manufacturing Co., Inc.
Features. Hex-Bore provides additional holding power. Does not mar the shaft. Superior fit, finish, and holding power. RoHS2 and REACH Compliant. Width tolerance: +.003"/-.010". Bore tolerance: +.002 ”/+.0005 ”. Temperature Range (Deg. F). Steel: -40 ° to 350 °. Stainless Steel:... [See More]
- Units: English
- Collar Material: Steel; Aluminum; Stainless Steel
- Collar Type: Two piece Clamp Style
- Width: 0.34 to 0.41
from Stafford Manufacturing Corp.
Accu-Clamp ™ Collars combine a non-marring clamp with a solid working face that is either fully machineable or hardened and ground. The machineable Accu-Clamp ™ Collar can be used as is, or modified by drilling, tapping, threading, turning, knurling, etc. The hardened and ground... [See More]
- Units: English
- Collar Material: Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.75
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. Opposing screws available. RoHS2 and REACH Compliant. Width tolerance: +.003 ”/-.010 ”. Bore tolerance: +.002"/+.0005". Temperature Range (Deg. F). Steel: -40 ° to 350 °. Aluminum: -40 ° to 225 °. [See More]
- Units: English
- Features: Opposing Screws (optional feature)
- Collar Type: Two piece Clamp Style
- Collar Material: Steel; Aluminum; Stainless Steel
from Stafford Manufacturing Corp.
Shaft Mounting Collars feature a flat and a countersunk, tapped hole to mount easily to a surface or component, or hung from a threaded rod. Features: Mount shafts to surface or components. Smooth bore protects shafts from damage. Use with Pipe Adapter Bushings to match OD of Schedule 40 Pipe [See More]
- Units: English
- Collar Material: Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.50
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Opposing screws available. Superior fit, finish and holding power. Acme, Left-hand and metric threads available. RoHS2 and REACH Compliant. Width tolerance: +.003 ”/-.010 ” [See More]
- Units: English
- Features: Opposing Screws (optional feature)
- Collar Type: One Piece Clamp Style Threaded Collar; Two piece Clamp Style
- Collar Material: Steel; Stainless Steel
from Stafford Manufacturing Corp.
Stafford ’s new Plastic Hinged Mounting Collars offer users optimum mounting and attachment flexibility. They can be used for mounting tube, pipe, or cable bundles and for attaching signs, sensors, diverter rails, lights, and many other devices. For applications requiring high strength, hinged... [See More]
- Units: English
- Bore: 0.875 to 1.125
- Collar Material: Steel (optional feature); Aluminum (optional feature); Stainless Steel (optional feature); Nylon
from Stafford Manufacturing Corp.
PowerRing ™ Keyless Shaft-Hub Locking Devices feature a smooth, non-marring bore which contracts securely onto a shaft while expanding the O.D. tightly into the I.D. of a hub. They are easy to install by tightening the locking bolts around the device ’s face. When these bolts are... [See More]
- Units: English
- Collar Material: Steel
- Collar Type: One Piece Set Screw
- Width: 1.85
from Stafford Manufacturing Corp.
PowerRing ™ Collars integrate the Stafford PowerRing ™ Shaft-Hub Lock design to transmit up to three times the axial load carrying capacity of conventional heavy duty collars for use as critical application shaft stops. They feature two precision machined halves pressed together around... [See More]
- Units: English
- Width: 1.50
- Collar Material: Steel
- Bore: 0.750
from Stafford Manufacturing Corp.
Stafford ’s new line of steel shaft collars are surface prepared to enable OEMs and contract manufacturers paint them for exact “color brand ” matching. Paintable Shaft Collars are machined from steel in one- and two-piece clamp-type styles and then phosphate coated, along with... [See More]
- Units: English
- Collar Material: Steel
- Collar Type: One Piece Clamp Style (Non-Threaded); Two piece Clamp Style (optional feature)
- Bore: 0.125 to 16.000