Aluminum Shaft Collars
from Imao-Fixtureworks
Supplied With: ・QCPSC0828-20 QCPSC0828-25: 2 of socket-head cap screw (stainless steel), M3 ×0.5-20L. ・QCPSC1036-20 QCPSC1036-25: 2 of socket-head cap screw (stainless steel), M3 ×0.5-25L [See More]
- Collar Material: Aluminum
- Units: Metric
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.79 to 0.94
from RS Components, Ltd.
Shaft Collar ID 10mm OD 20mm W 5.5mm Alu [See More]
- Collar Material: Aluminum; Aluminium
- Width: 0.22
- Collar Type: One Piece Set Screw; One Piece Clamp Style (Non-Threaded)
- Bore: 0.394
from Hangzhou Chinabase Machinery Co., Ltd.
China shaft collars manufacturer & exporter, we specialize in: solid shaft collars, single and double split collars, threaded bore split collars, inch Series shaft collars, Metric Series shaft collars, set Screw Style Collar. [See More]
- Collar Material: Steel; Aluminum; Stainless Steel
- Width: 0.25 to 1.25
- Units: English
- Bore: 0.188 to 4.000
from Stock Drive Products & Sterling Instrument - SDP/SI
Gear clamps are used to secure split hub gears and pulleys to a shaft. We offer one- and two-piece balanced precision and commercial-grade clamps with smaller clearance radii that work well in high-speed applications. They enable you to repeatedly remove and adjust the position of your part on a... [See More]
- Collar Material: Aluminum; 2024-T351 Alum/None
- Units: English
- Collar Type: Two piece Clamp Style
- Bore: 0.125
from Chengdu Leno Machinery Co., Ltd.
Both Inch and Metric available. [See More]
- Collar Material: Steel; Aluminum; Stainless Steel
- Units: English
- Collar Type: Two piece Clamp Style
- Width: 0.25 to 0.88
from RS Components, Ltd.
Shaft Collar ID 5mm OD 20mm W 5.5mm Alu [See More]
- Collar Material: Aluminum; Aluminium
- Width: 0.22
- Collar Type: One Piece Set Screw; One Piece Clamp Style (Non-Threaded)
- Bore: 0.197
from Hangzhou Chinabase Machinery Co., Ltd.
China shaft collars manufacturer & exporter, we specialize in: solid shaft collars, single and double split collars, threaded bore split collars, inch Series shaft collars, Metric Series shaft collars, set Screw Style Collar. [See More]
- Collar Material: Steel; Aluminum; Stainless Steel
- Units: English
- Collar Type: Hinge Shaft
- Width: 0.28 to 0.88
from Stock Drive Products & Sterling Instrument - SDP/SI
Gear clamps are used to secure split hub gears and pulleys to a shaft. We offer one- and two-piece balanced precision and commercial-grade clamps with smaller clearance radii that work well in high-speed applications. They enable you to repeatedly remove and adjust the position of your part on a... [See More]
- Collar Material: Aluminum; 2024-T351 Alum/None
- Units: English
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Bore: 0.125
from RS Components, Ltd.
Shaft Collar ID 6mm OD 20mm W 5.5mm Alu [See More]
- Collar Material: Aluminum; Aluminium
- Width: 0.22
- Collar Type: One Piece Set Screw; One Piece Clamp Style (Non-Threaded)
- Bore: 0.236
from Hangzhou Chinabase Machinery Co., Ltd.
China shaft collars manufacturer & exporter, we specialize in: solid shaft collars, single and double split collars, threaded bore split collars, inch Series shaft collars, Metric Series shaft collars, set Screw Style Collar. [See More]
- Collar Material: Steel; Aluminum; Stainless Steel
- Units: English
- Collar Type: Two piece Clamp Style
- Width: 0.28 to 0.88
from Stock Drive Products & Sterling Instrument - SDP/SI
Gear clamps are used to secure split hub gears and pulleys to a shaft. We offer one- and two-piece balanced precision and commercial-grade clamps with smaller clearance radii that work well in high-speed applications. They enable you to repeatedly remove and adjust the position of your part on a... [See More]
- Collar Material: Aluminum; 2024 Aluminum / None
- Units: English
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Bore: 0.126
from RS Components, Ltd.
Shaft Collar ID 8mm OD 20mm W 5.5mm Alu [See More]
- Collar Material: Aluminum; Aluminium
- Width: 0.22
- Collar Type: One Piece Set Screw; One Piece Clamp Style (Non-Threaded)
- Bore: 0.315
from Hangzhou Chinabase Machinery Co., Ltd.
China shaft collars manufacturer & exporter, we specialize in: solid shaft collars, single and double split collars, threaded bore split collars, inch Series shaft collars, Metric Series shaft collars, set Screw Style Collar. [See More]
- Collar Material: Steel; Aluminum; Stainless Steel
- Units: Metric
- Collar Type: Hinge Shaft
- Width: 0.35 to 0.75
from Stock Drive Products & Sterling Instrument - SDP/SI
Shafts are mechanical components, typically cylindrical in shape, used to transmit motion, torque, and/or power in any combination. They are also subject to lateral loads. These can be constant or fluctuating. The sizing of shafts, therefore, is usually determined as a function of... [See More]
- Collar Material: Aluminum; Cast Aluminum
- Bore: 0.394
- Units: Metric
from RS Components, Ltd.
Shaft Collar ID 10mm OD 30mm W 8mm Alu [See More]
- Collar Material: Aluminum; Aluminium
- Width: 0.31
- Collar Type: One Piece Set Screw; One Piece Clamp Style (Non-Threaded)
- Bore: 0.394
from Hangzhou Chinabase Machinery Co., Ltd.
China shaft collars manufacturer & exporter, we specialize in: solid shaft collars, single and double split collars, threaded bore split collars, inch Series shaft collars, Metric Series shaft collars, set Screw Style Collar. [See More]
- Collar Material: Steel; Aluminum; Stainless Steel
- Units: Metric
- Collar Type: Two piece Clamp Style
- Width: 0.35 to 0.75
from RS Components, Ltd.
Shaft Collar ID 12mm OD 30mm W 8mm Alu [See More]
- Collar Material: Aluminum; Aluminium
- Width: 0.31
- Collar Type: One Piece Set Screw; One Piece Clamp Style (Non-Threaded)
- Bore: 0.472
from Hangzhou Chinabase Machinery Co., Ltd.
China shaft collars manufacturer & exporter, we specialize in: solid shaft collars, single and double split collars, threaded bore split collars, inch Series shaft collars, Metric Series shaft collars, set Screw Style Collar. [See More]
- Collar Material: Steel; Aluminum; Stainless Steel
- Units: English
- Collar Type: Hinge Shaft
- Width: 0.28 to 0.75
from RS Components, Ltd.
Shaft Collar ID 14mm OD 30mm W 8mm Alu [See More]
- Collar Material: Aluminum; Aluminium
- Width: 0.31
- Collar Type: One Piece Set Screw; One Piece Clamp Style (Non-Threaded)
- Bore: 0.551
from RS Components, Ltd.
Shaft Collar ID 15mm OD 30mm W 8mm, Alu [See More]
- Collar Material: Aluminum; Aluminium
- Width: 0.31
- Collar Type: One Piece Set Screw; One Piece Clamp Style (Non-Threaded)
- Bore: 0.591
from RS Components, Ltd.
Shaft Collar ID 16mm OD 30mm W 8mm Alu [See More]
- Collar Material: Aluminum; Aluminium
- Width: 0.31
- Collar Type: One Piece Set Screw; One Piece Clamp Style (Non-Threaded)
- Bore: 0.630
from RS Components, Ltd.
Shaft Collar ID 16mm OD 45mm W 10mm Alu [See More]
- Collar Material: Aluminum; Aluminium
- Width: 0.39
- Collar Type: One Piece Set Screw; One Piece Clamp Style (Non-Threaded)
- Bore: 0.630
from RS Components, Ltd.
Shaft Collar ID 20mm OD 45mm W 10mm Alu [See More]
- Collar Material: Aluminum; Aluminium
- Width: 0.39
- Collar Type: One Piece Set Screw; One Piece Clamp Style (Non-Threaded)
- Bore: 0.787
from RS Components, Ltd.
Shaft Collar ID 25mm OD 45mm W 10mm Alu [See More]
- Collar Material: Aluminum; Aluminium
- Width: 0.39
- Collar Type: One Piece Set Screw; One Piece Clamp Style (Non-Threaded)
- Bore: 0.984
from RS Components, Ltd.
Shaft Collar ID 10mm OD 20mm W 5.5mm Alu [See More]
- Collar Material: Aluminum; Aluminium
- Features: Opposing Screws
- Collar Type: Two piece Clamp Style
- Width: 0.22
from RS Components, Ltd.
Shaft Collar ID 6mm OD 20mm W 5.5mm Alu [See More]
- Collar Material: Aluminum; Aluminium
- Features: Opposing Screws
- Collar Type: Two piece Clamp Style
- Width: 0.22
from RS Components, Ltd.
Shaft Collar ID 8mm OD 20mm W 5.5mm Alu [See More]
- Collar Material: Aluminum; Aluminium
- Features: Opposing Screws
- Collar Type: Two piece Clamp Style
- Width: 0.22
from RS Components, Ltd.
Shaft Collar ID 12mm OD 30mm W 8mm Alu [See More]
- Collar Material: Aluminum; Aluminium
- Features: Opposing Screws
- Collar Type: Two piece Clamp Style
- Width: 0.31
from RS Components, Ltd.
Shaft Collar ID 14mm OD 30mm W 8mm Alu [See More]
- Collar Material: Aluminum; Aluminium
- Features: Opposing Screws
- Collar Type: Two piece Clamp Style
- Width: 0.31
from RS Components, Ltd.
Shaft Collar ID 15mm OD 30mm W 8mm Alu [See More]
- Collar Material: Aluminum; Aluminium
- Features: Opposing Screws
- Collar Type: Two piece Clamp Style
- Width: 0.31
from RS Components, Ltd.
Shaft Collar ID 16mm OD 30mm W 8mm Alu [See More]
- Collar Material: Aluminum; Aluminium
- Features: Opposing Screws
- Collar Type: Two piece Clamp Style
- Width: 0.31
from RS Components, Ltd.
Shaft Collar ID 6mm OD 30mm W 8mm Alu [See More]
- Collar Material: Aluminum; Aluminium
- Features: Opposing Screws
- Collar Type: Two piece Clamp Style
- Width: 0.31
from RS Components, Ltd.
Shaft Collar ID 8mm OD 30mm W 8mm Alu [See More]
- Collar Material: Aluminum; Aluminium
- Features: Opposing Screws
- Collar Type: Two piece Clamp Style
- Width: 0.31
from RS Components, Ltd.
Shaft Collar ID 20mm OD 45mm W 10mm Alu [See More]
- Collar Material: Aluminum; Aluminium
- Features: Opposing Screws
- Collar Type: Two piece Clamp Style
- Width: 0.39
from RS Components, Ltd.
Shaft Collar ID 25mm OD 45mm W 10mm Alu [See More]
- Collar Material: Aluminum; Aluminium
- Features: Opposing Screws
- Collar Type: Two piece Clamp Style
- Width: 0.39
from RS Components, Ltd.
Shaft Collar ID 25mm OD 45mm W 15mm Alu [See More]
- Collar Material: Aluminum; Aluminium
- Width: 0.59
- Collar Type: One Piece Set Screw; One Piece Clamp Style (Non-Threaded)
- Bore: 0.984
from RS Components, Ltd.
Shaft Collar ID 35mm OD 57mm W 15mm Alu [See More]
- Collar Material: Aluminum; Aluminium
- Width: 0.59
- Collar Type: One Piece Set Screw; One Piece Clamp Style (Non-Threaded)
- Bore: 1.378
from Stafford Manufacturing Corp.
Accu-Flange ™ Collar is a machineable flange collar that can be configured by the user to perform a wide range of applications such as a pulley, cam, or component mounting device. Featuring an integral clamp incorporating a double-split design and relief groove, this clamping flange collar... [See More]
- Collar Material: Aluminum
- Units: English
- Collar Type: Two piece Clamp Style
- Width: 0.75
from W.M. Berg
SET SCREW COLLAR [See More]
- Collar Material: Aluminum
- Bore: 0.126
- Collar Type: One Piece Set Screw
- O.D.: 0.38
from Boston Gear
Overview. Boston Gear stocks a variety of clamping collars in different designs, including threaded, 1-piece and 2-piece styles, and materials, including nylon, steel, aluminum, and stainless steel. Such diversity is offered to ensure that the rapidly changing demands of every industry are met. [See More]
- Collar Material: Steel; Aluminum; Nylon
- Units: English
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Bore: 0.125 to 3.000
from Climax Metal Products Company
One-Piece Clamping Collars are designed to handle applications that require a greater axial load capacity than Set Screw Collars without marring the shaft. Recessed screw styles of One-Piece Clamping Collars are available to provide safety with an outside surface free of major projections. CLIMAX... [See More]
- Collar Material: Steel; Aluminum; Stainless Steel
- Units: English; Metric (optional feature)
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Bore: 0.125 to 4.000
from Reid Supply
Shaft collars have extremely diverse applications and fall into three main categories, positioners, spacers and limiters. Reid Supply has all the main types from one-piece, two-piece, hinged, set screw aand self-locking shaft collars that will fit most shaft types from round to keyed, threaded or... [See More]
- Collar Material: Aluminum
- Width: 0.34
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Bore: 0.375
from NBK America LLC
To joint the shaft with the side panel of a conveyance line and aluminum frame. It is compatible with screw diameter of groove pitch and fixing nut of the commercially available aluminum frame. Clamping Type. Mounting shaft and removing shaft are easy. Moreover this does not scratch the shaft. [See More]
- Collar Material: Aluminum
- Units: Metric
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. Available with keyways. Opposing screws for balance. RoHS2 and REACH Compliant. Width tolerance: +.003 ”/-.010 ”. Bore tolerance: +.002 ”/+.0005 ”. Temperature Range (Deg. F). Steel: -40 ° to 350... [See More]
- Collar Material: Steel; Aluminum; Stainless Steel; Nylon; Zinc Plated Steel
- Features: Opposing Screws
- Collar Type: Two piece Clamp Style
- Units: English
from HELI-CAL® Products Company, an MW Industries company
The A Series meets performance demands over a wide range of applications, including drive systems for encoders, instrumentation, lead screws, small pumps, feed rollers and anywhere a light to medium duty, torsionally flexible coupling/coupler is required. Helical's most popular coupling. An array of... [See More]
- Collar Material: Aluminum
- Units: English
- Collar Type: One Piece Set Screw (optional feature); One Piece Clamp Style (Non-Threaded) (optional feature); One Piece Clamp Style Threaded Collar (optional feature)
- Bore: 0.090 to 0.625
from Stafford Manufacturing Corp.
Accu-Flange ™ Mounting Collar is a machineable flange collar that can be configured by the user to perform a wide range of applications such as a pulley, cam, or component mounting device. Featuring an integral clamp incorporating a double-split design and relief groove, this clamping flange... [See More]
- Collar Material: Aluminum
- Units: English
- Collar Type: Two piece Clamp Style
- Width: 0.75
from Climax Metal Products Company
Set Screw Collars are the most cost effective shaft collar design. Lightweight styles are available where an application has a space constraint. If additional load capacity is required, CLIMAX provides Set Screw Collars with a second screw at 90 º. Set Screw Collars are also available with a... [See More]
- Collar Material: Steel; Aluminum; Stainless Steel; Acetal
- Units: English; Metric (optional feature)
- Collar Type: One Piece Set Screw
- Bore: 0.062 to 5.938
from Reid Supply
Shaft collars have extremely diverse applications and fall into three main categories, positioners, spacers and limiters. Reid Supply has all the main types from one-piece, two-piece, hinged, set screw aand self-locking shaft collars that will fit most shaft types from round to keyed, threaded or... [See More]
- Collar Material: Aluminum
- Width: 0.44
- Collar Type: Two piece Clamp Style
- Bore: 0.625
from NBK America LLC
The clamper joints 2 shafts with cross. Clamping Type. Mounting shaft and removing shaft are easy. Moreover this does not scratch the shaft. Convenient for adjustment of side guide and sensors of the conveyance line. Light aluminum and stainless steel with highly corrosion-resistant are... [See More]
- Collar Material: Aluminum
- Units: Metric
- Collar Type: One Piece Clamp Style (Non-Threaded)
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. Excellent for high axial loads. Transmit torque in confined spaces. Step bores available. Additional sizes available. RoHS2 and REACH Compliant. Width tolerance: +.003"/-.010". Bore tolerance: +.002"/+.0005". Temperature Range... [See More]
- Collar Material: Steel; Aluminum; Stainless Steel
- Units: English
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.62 to 1.94
from HELI-CAL® Products Company, an MW Industries company
The DS Series was designed for today's high performance motion control systems. This Series incorporates two helical beams (double start) in each of two separate HELI-CAL Flexures (double flexure), combining greater end-to-end rotational accuracy with radial flexibility in one design. Available only... [See More]
- Collar Material: Aluminum
- Units: English
- Collar Type: One Piece Set Screw (optional feature); One Piece Clamp Style (Non-Threaded) (optional feature); One Piece Clamp Style Threaded Collar (optional feature)
- Bore: 0.188 to 0.750
from Stafford Manufacturing Corp.
Stafford ’s new Micro-Adjustable Positioning Collar assembly lets users make bi-directional adjustments along a shaft to precisely center and locate components. The Micro-Adjustable Positioning Collar assembly features two knurled collars which clamp directly to a shaft and have a hub... [See More]
- Collar Material: Aluminum
- Units: English
- Collar Type: Two piece Clamp Style
- Width: 1.50
from Climax Metal Products Company
Two-Piece Clamping Collars are designed to handle applications that require greater axial load capacity than Set Screw Collars and One-Piece Clamping Collars without marring the shaft. Recessed screw styles of Two-Piece Clamping Collars are available to provide safety with an outside surface free of... [See More]
- Collar Material: Steel; Aluminum; Stainless Steel; Acetal
- Units: English; Metric (optional feature)
- Collar Type: Two piece Clamp Style
- Bore: 0.125 to 6.000
from NBK America LLC
A clamper that joints 2 shafts at any angle. Clamping type for one side. Mounting shaft, removing shaft and angle adjustment are easy. Moreover this does not scratch the shaft. Convenient for fixing of side guide and sensors of the conveyance line. Light aluminum and stainless steel with highly... [See More]
- Collar Material: Aluminum
- Units: Metric
- Collar Type: One Piece Clamp Style (Non-Threaded)
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. Available with keyways. Opposing screws for balance. RoHS2 and REACH Compliant. Width tolerance: +.076mm/-.254mm. Bore tolerance: +.050mm/+.012mm. Temperature Range (Deg. F). Steel: -40 ° to 350 °. Zinc Plated Steel:... [See More]
- Collar Material: Steel; Aluminum; Stainless Steel; Nylon; Zinc Plated Steel
- Features: Opposing Screws
- Collar Type: Two piece Clamp Style
- Units: Metric
from Stafford Manufacturing Corp.
Clamp-On Wrench 1-Piece Type Round Bore (Shaft) [See More]
- Collar Material: Aluminum
- Units: English
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.38
from NBK America LLC
The clamper joints 2 shafts with T-shaped cross. Clamping Type. Mounting shaft and removing shaft are easy. Moreover this does not scratch the shaft. Space-saving layout is possible. Convenient for fixing of side guide and sensors of the conveyance line. Light aluminum and stainless steel with... [See More]
- Collar Material: Aluminum
- Units: Metric
- Collar Type: One Piece Clamp Style (Non-Threaded)
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. RoHS2 and REACH Compliant. Width tolerance: +.076mm/-.254mm. Bore tolerance: +.050mm/+.012mm. Temperature Range (Deg. F). Steel: -40 ° to 350 °. Zinc Plated Steel: -40 ° to 350 °. Aluminum: -40 ° to 225... [See More]
- Collar Material: Steel; Aluminum; Stainless Steel; Nylon; Zinc Plated Steel, Anodized Aluminum
- Units: Metric
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.35 to 0.75
from Stafford Manufacturing Corp.
The Stafford Flip-Lok ™ Quick Release Clamp Collar features a cam lever for clamping and a knurled nut for adjusting the clamping preset; making it easy to open-close and clamp by hand without tools. Suitable for use in horizontal and vertical applications as a clamp, stop, or spacer, simply... [See More]
- Collar Material: Aluminum
- Units: English
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.67
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. RoHS2 and REACH Compliant. Width tolerance: +.076mm/-.254mm. Bore tolerance: +.002 ”/+.0005 ”. Temperature Range (Deg. F). Steel: -40 ° to 350 °. Anodized Aluminum: -40 ° to 200 °. Stainless: -40... [See More]
- Collar Material: Steel; Aluminum; Stainless Steel; Nylon; Titanium
- Units: English; Metric
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.35 to 0.75
from Stafford Manufacturing Corp.
1-Piece Clamp-Type Shaft Collars are for use on standard round shafts, hard or soft, as well as on thin wall tube or over a split hub. Precision machined, non-marring, easy to adjust, with high clamping power, they are stocked in the following materials: Steel, Stainless Steel, Aluminum, Nylon ,... [See More]
- Collar Material: Aluminum
- Units: English
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.25
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. No tools required. Designed for quick adjustments. Quick Clamp, Quick Release. Made from high quality aluminum. RoHS2 and REACH Compliant. Width tolerance: +.076mm/-.254mm. Bore tolerance: +.050mm/+.012mm. Temperature Range: -40 °F to 200 °F [See More]
- Collar Material: Aluminum
- Units: Metric
- Collar Type: Hinge Shaft
- Width: 0.39 to 0.75
from Stafford Manufacturing Corp.
Rotary Encoder Collars add speed sensing capability to shafts. Machined from aluminum, they feature steel targets that can be read from both the face and O. surfaces. Since they are fully split, they can be mounted to shafts without the need to remove other components. Suitable for new and retrofit... [See More]
- Collar Material: Aluminum
- Features: Encoder Targets
- Collar Type: Two piece Clamp Style
- Units: English
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. Opposing screws available. RoHS2 and REACH Compliant. Width tolerance: +.076mm/-.254mm. Bore tolerance: +.050mm/+.012mm. Temperature Range (Deg. F). Steel: -40 ° to 350 °. Aluminum: -40 ° to 225 °. Stainless:... [See More]
- Collar Material: Steel; Aluminum; Stainless Steel
- Features: Opposing Screws (optional feature)
- Collar Type: Two piece Clamp Style
- Units: Metric
from Stafford Manufacturing Corp.
2-Piece Clamp-Type Shaft Collars are for use on standard round shafts, hard or soft, as well as on thin wall tube or over a split hub. They can be completely disassembled and placed anywhere on a shaft. Precision machined, non-marring, easy to adjust, with high clamping power, they are stocked in... [See More]
- Collar Material: Aluminum
- Units: English
- Collar Type: Two piece Clamp Style
- Width: 0.25
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. Available with keyways. Opposing screws available. RoHS2 and REACH Compliant. Width tolerance: +.076mm/-.254mm. Bore tolerance: +.002 ”/+.0005 ”. Temperature Range (Deg. F). Steel: -40 ° to 350 °. Anodized... [See More]
- Collar Material: Steel; Aluminum; Stainless Steel; Nylon; Titanium
- Features: Opposing Screws (optional feature)
- Collar Type: Two piece Clamp Style
- Units: English; Metric
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. Available with keyways (MSPK Series). Opposing screws available (MSPB Series). RoHS2 and REACH Compliant. Width tolerance: +.076mm/-.254mm. Bore tolerance: +.050mm/+.012mm. Temperature Range (Deg. F). Steel: -40 ° to 350... [See More]
- Collar Material: Steel; Aluminum; Stainless Steel; Nylon; Zinc Plated Steel, Anodized Aluminum
- Units: Metric
- Collar Type: Two piece Clamp Style
- Width: 0.35 to 0.75
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. RoHS2 and REACH Compliant. Width tolerance: +.003 ”/-.010 ”. Bore tolerance: +.002 ”/+.0005 ”. Temperature Range (Deg. F). Steel: -40 ° to 350 °. Zinc Plated Steel: -40 ° to 350 °. [See More]
- Collar Material: Steel; Aluminum; Stainless Steel; Nylon
- Units: English
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.28 to 0.88
from Ruland Manufacturing Co., Inc.
Features. Hex-Bore provides additional holding power. Does not mar the shaft. Superior fit, finish, and holding power. RoHS2 and REACH Compliant. Width tolerance: +.003"/-.010". Bore tolerance: +.002 ”/+.0005 ”. Temperature Range (Deg. F). Steel: -40 ° to 350 °. Stainless Steel:... [See More]
- Collar Material: Steel; Aluminum; Stainless Steel
- Units: English
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.34 to 0.41
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. No tools required. Designed for quick adjustments. Quick Clamp, Quick Release. Made from high quality aluminum. RoHS2 and REACH Compliant. Width tolerance: +.003 ”/-.010 ”. Bore tolerance: +.002 ”/+.0005 ”. Temperature Range: -40 °F to... [See More]
- Collar Material: Aluminum
- Units: English
- Collar Type: Hinge Shaft
- Width: 0.39 to 0.75
from Ruland Manufacturing Co., Inc.
Features. Forged socket set screws. RoHS2 and REACH Compliant. Width tolerance: +.003 ”/-.010 ”. Bore tolerances for SC styles: Up to 1 ”: +.0005 ” to +.002 ”. 1-1/16 ” to 3 ”: +.0005 ” to +.003 ”. 3-1/16 ” to 4 ”: +.0010 ” to... [See More]
- Collar Material: Steel; Aluminum; Stainless Steel; Nylon
- Units: English
- Collar Type: One Piece Set Screw
- Width: 0.25 to 1.12
from Ruland Manufacturing Co., Inc.
Features. Reduced width for confined spaces. Well suited for encoder applications. Light-weight. Does not mar the shaft. Superior fit, finish and holding power. Additional sizes available. RoHS2 and REACH Compliant. Width tolerance: +.003"/-.010". Bore tolerance: +.002"/+.0005". Temperature Range... [See More]
- Collar Material: Aluminum; Stainless Steel
- Units: English
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.22 to 0.47
from Ruland Manufacturing Co., Inc.
Features. Reduced width for confined spaces. Well suited for encoder applications. Light-weight. Does not mar the shaft. Superior fit, finish and holding power. Additional sizes available. RoHS2 and REACH Compliant. Width tolerance: +.003"/-.010". Bore tolerance: +.002"/+.0005". Temperature Range... [See More]
- Collar Material: Aluminum; Stainless Steel
- Features: Opposing Screws
- Collar Type: Two piece Clamp Style
- Units: English
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. Available with keyways (SPK Series). Opposing screws available (SPB Series). RoHS2 and REACH Compliant. Width tolerance: +.003 ”/-.010 ”. Bore tolerance: +.002 ”/+.0005 ”. Temperature Range (Deg. F). [See More]
- Collar Material: Steel; Aluminum; Stainless Steel; Nylon; Zinc Plated Steel
- Units: English
- Collar Type: Two piece Clamp Style
- Width: 0.28 to 0.88
from Ruland Manufacturing Co., Inc.
Features. Hex-Bore provides additional holding power. Does not mar the shaft. Superior fit, finish, and holding power. RoHS2 and REACH Compliant. Width tolerance: +.003"/-.010". Bore tolerance: +.002 ”/+.0005 ”. Temperature Range (Deg. F). Steel: -40 ° to 350 °. Stainless Steel:... [See More]
- Collar Material: Steel; Aluminum; Stainless Steel
- Units: English
- Collar Type: Two piece Clamp Style
- Width: 0.34 to 0.41
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. Opposing screws available. RoHS2 and REACH Compliant. Width tolerance: +.003 ”/-.010 ”. Bore tolerance: +.002"/+.0005". Temperature Range (Deg. F). Steel: -40 ° to 350 °. Aluminum: -40 ° to 225 °. [See More]
- Collar Material: Steel; Aluminum; Stainless Steel
- Features: Opposing Screws (optional feature)
- Collar Type: Two piece Clamp Style
- Units: English