Metric Shaft Collars
Description
Metric shaft collars are mechanical components used to position and secure parts on a shaft. They are designed to fit around a shaft and can be tightened to hold components in place, preventing them from moving along the shaft.
Working Principle
Metric shaft collars work by clamping onto a shaft, creating a frictional hold that prevents axial movement. This is typically achieved through the use of set screws or clamping mechanisms. The collars are useful because they provide a simple and effective way to secure components without the need for additional machining or complex assembly processes.
Applications
Metric shaft collars are used in various applications where precise positioning of components on a shaft is required. For example, they are commonly used in machinery to hold bearings, sprockets, and pulleys in place. They can also be found in medical devices, where they help position components accurately within the equipment.
Advantages over other Shaft Collars
One advantage of metric shaft collars is their ease of installation and adjustment. Unlike more complex fastening systems, shaft collars can be quickly installed and repositioned as needed. Additionally, they do not require special tools for installation, making them a convenient choice for many applications.
Limitations
A limitation of metric shaft collars is that they can be bulky and expensive compared to other fastening methods. The set screw used in some designs can also damage the shaft by digging into it when tightened, which may not be suitable for all applications.
Considerations
When selecting metric shaft collars, it is important to consider factors such as initial cost, operating expenses, and durability. While they offer ease of use, the potential for shaft damage and the cost of replacement should be weighed against the benefits. Additionally, the accuracy of positioning and the need for maintenance should be evaluated based on the specific requirements of the application.
from Imao-Fixtureworks
Supplied With: ・QCPSC0828-20 QCPSC0828-25: 2 of socket-head cap screw (stainless steel), M3 ×0.5-20L. ・QCPSC1036-20 QCPSC1036-25: 2 of socket-head cap screw (stainless steel), M3 ×0.5-25L [See More]
- Units: Metric
- Collar Material: Aluminum
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.79 to 0.94
from Stock Drive Products & Sterling Instrument - SDP/SI
Shafts are mechanical components, typically cylindrical in shape, used to transmit motion, torque, and/or power in any combination. They are also subject to lateral loads. These can be constant or fluctuating. The sizing of shafts, therefore, is usually determined as a function of... [See More]
- Units: Metric
- Bore: 0.059
- Width: 0.14
- O.D.: 0.24
from Hangzhou Chinabase Machinery Co., Ltd.
China shaft collars manufacturer & exporter, we specialize in: solid shaft collars, single and double split collars, threaded bore split collars, inch Series shaft collars, Metric Series shaft collars, set Screw Style Collar. [See More]
- Units: Metric
- Width: 0.20 to 0.71
- Collar Material: Steel; Stainless Steel
- Bore: 0.157 to 1.969
from Chengdu Leno Machinery Co., Ltd.
Material: Alu. Alloy, Steel and Stainless Steel;. Surface Treatment: Black finished for Steel. [See More]
- Units: Metric
- Collar Material: Stainless Steel
- Collar Type: One Piece Set Screw
- Width: 0.35 to 0.59
from Stock Drive Products & Sterling Instrument - SDP/SI
Shafts are mechanical components, typically cylindrical in shape, used to transmit motion, torque, and/or power in any combination. They are also subject to lateral loads. These can be constant or fluctuating. The sizing of shafts, therefore, is usually determined as a function of... [See More]
- Units: Metric
- Bore: 0.394
- Width: 0.43
- O.D.: 0.98
from Hangzhou Chinabase Machinery Co., Ltd.
China shaft collars manufacturer & exporter, we specialize in: solid shaft collars, single and double split collars, threaded bore split collars, inch Series shaft collars, Metric Series shaft collars, set Screw Style Collar. [See More]
- Units: Metric
- Collar Material: Steel; Aluminum; Stainless Steel
- Collar Type: Hinge Shaft
- Width: 0.35 to 0.75
from Chengdu Leno Machinery Co., Ltd.
Both Inch and Metric available. [See More]
- Units: Metric
- Width: 0.35 to 0.75
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Bore: 0.118 to 3.150
from Stock Drive Products & Sterling Instrument - SDP/SI
Shafts are mechanical components, typically cylindrical in shape, used to transmit motion, torque, and/or power in any combination. They are also subject to lateral loads. These can be constant or fluctuating. The sizing of shafts, therefore, is usually determined as a function of... [See More]
- Units: Metric
- Bore: 0.394
- Collar Material: Aluminum; Cast Aluminum
from Hangzhou Chinabase Machinery Co., Ltd.
China shaft collars manufacturer & exporter, we specialize in: solid shaft collars, single and double split collars, threaded bore split collars, inch Series shaft collars, Metric Series shaft collars, set Screw Style Collar. [See More]
- Units: Metric
- Collar Material: Steel; Aluminum; Stainless Steel
- Collar Type: Two piece Clamp Style
- Width: 0.35 to 0.75
from Stock Drive Products & Sterling Instrument - SDP/SI
Shafts are mechanical components, typically cylindrical in shape, used to transmit motion, torque, and/or power in any combination. They are also subject to lateral loads. These can be constant or fluctuating. The sizing of shafts, therefore, is usually determined as a function of... [See More]
- Units: Metric
- Collar Material: Stainless Steel; 304 Stainless Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.39
from Stock Drive Products & Sterling Instrument - SDP/SI
Shafts are mechanical components, typically cylindrical in shape, used to transmit motion, torque, and/or power in any combination. They are also subject to lateral loads. These can be constant or fluctuating. The sizing of shafts, therefore, is usually determined as a function of... [See More]
- Units: Metric
- Collar Material: Stainless Steel; 304 Stainless Steel
- Collar Type: Two piece Clamp Style
- Width: 0.39
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. RoHS2 and REACH Compliant. Width tolerance: +.076mm/-.254mm. Bore tolerance: +.102mm/-.000mm. Temperature Range: -40 °F to 350 °F [See More]
- Units: Metric
- Collar Material: Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 1.26
from NBK America LLC
Digicollar bore diameter collar. Digicollar bore diameter can be changed to match the rotation shaft. All products are provided with hex socket set screws. Keys are not supplied. Use the key provided with the main body of the Digicollar. [See More]
- Units: Metric
- O.D.: 0.71
from Specialized Marketing Intl., Inc.
If you need shaft collars / fasteners with real holding power you need GripFastTM. The patented device that can be removed or adjusted in seconds! With it's patented features and our computer analysis program we can design a GripFastTM to meet your specific needs. [See More]
- Units: Metric
- Bore: 0.158
- Collar Material: Plastic
- O.D.: 0.56
from Stafford Manufacturing Corp.
Stafford Metric Shaft Collars are fully metric in all specifications, including the clamping screws. 1-Piece Clamp-Type Shaft Collars are designed for use on standard round shafts, hard or soft, as well as on thin wall tube or over a split hub. They are precision machined, non-marring, easy to... [See More]
- Units: Metric
- Collar Material: Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.35
from Whittet-Higgins Company
These CLAMP COLLARS are often adequate to position and lock to shaft cams, conveyor rolls, gears, pulleys, sheaves, sprocket and the multitude of other machine components where exacting adjustment is not required to transmit thrust and torque loads. They are great as adjustable shaft spacers or... [See More]
- Units: English (optional feature); Metric
- Collar Material: Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.32
from Lucas Industrial
True metric dimensions on standard set screw collar [See More]
- Units: Metric
- Collar Material: Steel
- Collar Type: One Piece Set Screw
- Width: 0.20
from HELI-CAL® Products Company, an MW Industries company
The W Series combines the best features of the A Series and the H Series, with the convenience of metric dimensions and fasteners for your metric based designs. The W-Series can be used in a wide range of applications from driving components with light torque requirements, such as encoders and... [See More]
- Units: Metric
- Collar Material: Steel (optional feature); Aluminum (optional feature)
- Collar Type: One Piece Set Screw (optional feature); One Piece Clamp Style (Non-Threaded) (optional feature); One Piece Clamp Style Threaded Collar (optional feature)
- Bore: 0.118 to 0.787
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. Available with keyways. Opposing screws available. RoHS2 and REACH Compliant. Width tolerance: +.076mm/-.254mm. Bore tolerance: +.102mm/-.000mm. Temperature Range: -40 °F to 350 °F [See More]
- Units: Metric
- Features: Opposing Screws (optional feature)
- Collar Type: Two piece Clamp Style
- Collar Material: Steel; Stainless Steel
from NBK America LLC
To joint the shaft with the side panel of a conveyance line and aluminum frame. It is compatible with screw diameter of groove pitch and fixing nut of the commercially available aluminum frame. Clamping Type. Mounting shaft and removing shaft are easy. Moreover this does not scratch the shaft. [See More]
- Units: Metric
- Collar Material: Aluminum
from Stafford Manufacturing Corp.
Stafford Metric Shaft Collars are fully metric in all specifications, including the set screw. Set Screw Collars are oldest type of shaft collar. They function by gouging the set screw into the surface of a soft shaft. They are a low-cost answer when frequent adjustment is not a consideration. [See More]
- Units: Metric
- Collar Material: Stainless Steel
- Collar Type: One Piece Set Screw
- Width: 0.20
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. Available with keyways. Opposing screws for balance. RoHS2 and REACH Compliant. Width tolerance: +.076mm/-.254mm. Bore tolerance: +.050mm/+.012mm. Temperature Range (Deg. F). Steel: -40 ° to 350 °. Zinc Plated Steel:... [See More]
- Units: Metric
- Features: Opposing Screws
- Collar Type: Two piece Clamp Style
- Collar Material: Steel; Aluminum; Stainless Steel; Nylon; Zinc Plated Steel
from NBK America LLC
To joint the shaft with the side panel of a conveyance line and aluminum frame. It is compatible with screw diameter of groove pitch and fixing nut of the commercially available aluminum frame. Clamping Type. Mounting shaft and removing shaft are easy. Moreover this does not scratch the shaft. [See More]
- Units: Metric
from Stafford Manufacturing Corp.
Stafford Metric Shaft Collars are fully metric in all specifications, including the clamping screws. Available only from Stafford, the Hinge Collar features a triple-link hinge and captive screw in one unit, combining the flexibility of the two-piece collar with the simplicity of the one-piece. [See More]
- Units: Metric
- Collar Material: Stainless Steel
- Collar Type: Hinge Shaft
- Width: 0.35
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. RoHS2 and REACH Compliant. Width tolerance: +.076mm/-.254mm. Bore tolerance: +.050mm/+.012mm. Temperature Range (Deg. F). Steel: -40 ° to 350 °. Zinc Plated Steel: -40 ° to 350 °. Aluminum: -40 ° to 225... [See More]
- Units: Metric
- Collar Material: Steel; Aluminum; Stainless Steel; Nylon; Zinc Plated Steel, Anodized Aluminum
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.35 to 0.75
from NBK America LLC
The clamper joints 2 shafts with cross. Clamping Type. Mounting shaft and removing shaft are easy. Moreover this does not scratch the shaft. Convenient for adjustment of side guide and sensors of the conveyance line. Light aluminum and stainless steel with highly corrosion-resistant are... [See More]
- Units: Metric
- Collar Material: Aluminum
- Collar Type: One Piece Clamp Style (Non-Threaded)
from Stafford Manufacturing Corp.
Stafford Metric Shaft Collars are fully metric in all specifications, including the clamping screws. 2-Piece Clamp-Type Collars are designed for use on standard round shafts, hard or soft, as well as on thin wall tube or over a split hub. They can be completely disassembled and placed anywhere on a... [See More]
- Units: Metric
- Collar Material: Steel
- Collar Type: Two piece Clamp Style
- Width: 0.35
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. RoHS2 and REACH Compliant. Width tolerance: +.076mm/-.254mm. Bore tolerance: +.002 ”/+.0005 ”. Temperature Range (Deg. F). Steel: -40 ° to 350 °. Anodized Aluminum: -40 ° to 200 °. Stainless: -40... [See More]
- Units: English; Metric
- Collar Material: Steel; Aluminum; Stainless Steel; Nylon; Titanium
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.35 to 0.75
from NBK America LLC
The clamper joints 2 shafts with cross. Clamping Type. Mounting shaft and removing shaft are easy. Moreover this does not scratch the shaft. Convenient for adjustment of side guide and sensors of the conveyance line. Light aluminum and stainless steel with highly corrosion-resistant are... [See More]
- Units: Metric
- Collar Type: One Piece Clamp Style (Non-Threaded)
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. Excellent for high axial loads. Transmit torque in confined spaces. Step bores available. Additional sizes available. RoHS2 and REACH Compliant. Width tolerance: +.076mm/-.254mm. Bore tolerance: +.050mm/+.012mm. Temperature... [See More]
- Units: Metric
- Collar Material: Steel; Aluminum; Stainless Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.79 to 1.30
from NBK America LLC
A clamper that joints 2 shafts at any angle. Clamping type for one side. Mounting shaft, removing shaft and angle adjustment are easy. Moreover this does not scratch the shaft. Convenient for fixing of side guide and sensors of the conveyance line. Light aluminum and stainless steel with highly... [See More]
- Units: Metric
- Collar Material: Aluminum
- Collar Type: One Piece Clamp Style (Non-Threaded)
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. Opposing hardware for balance. Excellent for high axial loads. Transmit torque in confined spaces. Step bores available. Additional sizes available. RoHS2 and REACH Compliant. Width tolerance: +.076mm/-.254mm. Bore tolerance:... [See More]
- Units: Metric
- Features: Opposing Screws
- Collar Type: Two piece Clamp Style
- Collar Material: Steel; Stainless Steel
from NBK America LLC
A clamper that joints 2 shafts at any angle. Clamping type for one side. Mounting shaft, removing shaft and angle adjustment are easy. Moreover this does not scratch the shaft. Convenient for fixing of side guide and sensors of the conveyance line. Light aluminum and stainless steel with highly... [See More]
- Units: Metric
- Collar Type: One Piece Clamp Style (Non-Threaded)
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. No tools required. Designed for quick adjustments. Quick Clamp, Quick Release. Made from high quality aluminum. RoHS2 and REACH Compliant. Width tolerance: +.076mm/-.254mm. Bore tolerance: +.050mm/+.012mm. Temperature Range: -40 °F to 200 °F [See More]
- Units: Metric
- Collar Material: Aluminum
- Collar Type: Hinge Shaft
- Width: 0.39 to 0.75
from NBK America LLC
Set collar for securing bearings. It can be fixed by pressing the bearing inner wheel only on the convex of the main body. Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft. Clamping Type. Mounting and removing are easy. Moreover this does not scratch the... [See More]
- Units: Metric
- Collar Material: Stainless Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.43
from Ruland Manufacturing Co., Inc.
Features. Forged socket set screws. RoHS2 and REACH Compliant. Width tolerance: +.076mm/-.254mm. Bore tolerance: +.050mm/+.012mm. Temperature Range (Deg. F). Steel: -40 ° to 350 °. Stainless: -40 ° to 350 ° [See More]
- Units: Metric
- Collar Material: Steel; Stainless Steel
- Collar Type: One Piece Set Screw
- Width: 0.20 to 0.71
from NBK America LLC
Set collar for securing bearing. It can be fixed by pressing the bearing inner wheel only on the convex of the main body. Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft. It is attached to the shaft by the set screws. [See More]
- Units: Metric
- Collar Material: Stainless Steel
- Collar Type: One Piece Set Screw
- Width: 0.43
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. Opposing screws available. RoHS2 and REACH Compliant. Width tolerance: +.076mm/-.254mm. Bore tolerance: +.050mm/+.012mm. Temperature Range (Deg. F). Steel: -40 ° to 350 °. Aluminum: -40 ° to 225 °. Stainless:... [See More]
- Units: Metric
- Features: Opposing Screws (optional feature)
- Collar Type: Two piece Clamp Style
- Collar Material: Steel; Aluminum; Stainless Steel
from NBK America LLC
Clamping type set collar. Installation and removing are easy. Moreover this does not scratch the shaft. Optimal for machines and devices that are frequently mounted/removed, e.g. slide shaft. [See More]
- Units: Metric
- Width: 0.39
- Collar Type: One Piece Clamp Style (Non-Threaded)
- O.D.: 1.18
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. Available with keyways. Opposing screws available. RoHS2 and REACH Compliant. Width tolerance: +.076mm/-.254mm. Bore tolerance: +.002 ”/+.0005 ”. Temperature Range (Deg. F). Steel: -40 ° to 350 °. Anodized... [See More]
- Units: English; Metric
- Features: Opposing Screws (optional feature)
- Collar Type: Two piece Clamp Style
- Collar Material: Steel; Aluminum; Stainless Steel; Nylon; Titanium
from NBK America LLC
Clamping type set collar. Installation and removing are easy. Moreover this does not scratch the shaft. Optimal for machines and devices that are frequently mounted/removed, e.g. slide shaft. [See More]
- Units: Metric
- Width: 0.39
- Collar Type: One Piece Clamp Style (Non-Threaded)
- O.D.: 1.18
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. RoHS2 and REACH Compliant. Width tolerance: +.076mm/-.254mm. Temperature Range (Deg. F). Steel: -40 ° to 350 °. Stainless: -40 ° to 350 ° [See More]
- Units: Metric
- Collar Material: Steel; Stainless Steel
- Collar Type: One Piece Clamp Style Threaded Collar
- Width: 0.35 to 0.59
from NBK America LLC
Clamping type set collar. Installation and removing are easy. Moreover this does not scratch the shaft. Optimal for machines and devices that are frequently mounted/removed, e.g. slide shaft. [See More]
- Units: Metric
- Width: 0.39
- Collar Type: One Piece Clamp Style (Non-Threaded)
- O.D.: 1.18
from Ruland Manufacturing Co., Inc.
Features. Does not mar the shaft. Superior fit, finish and holding power. Available with keyways (MSPK Series). Opposing screws available (MSPB Series). RoHS2 and REACH Compliant. Width tolerance: +.076mm/-.254mm. Bore tolerance: +.050mm/+.012mm. Temperature Range (Deg. F). Steel: -40 ° to 350... [See More]
- Units: Metric
- Collar Material: Steel; Aluminum; Stainless Steel; Nylon; Zinc Plated Steel, Anodized Aluminum
- Collar Type: Two piece Clamp Style
- Width: 0.35 to 0.75
from NBK America LLC
Set collar for securing bearings. It can be fixed by pressing the bearing inner wheel only on the convex of the main body. Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft. Clamping Type. Mounting and removing are easy. Moreover this does not scratch the... [See More]
- Units: Metric
- Width: 0.43
- Collar Type: One Piece Clamp Style (Non-Threaded)
- O.D.: 1.18
from Ruland Manufacturing Co., Inc.
Features. Reduced width for confined spaces. Well suited for encoder applications. Light-weight. Does not mar the shaft. Superior fit, finish and holding power. Additional sizes available. RoHS2 and REACH Compliant. Width tolerance: +.076mm/-.254mm. Bore tolerance: +.050mm/+.012mm. Temperature Range... [See More]
- Units: Metric
- Collar Material: Aluminum; Stainless Steel
- Collar Type: One Piece Clamp Style (Non-Threaded)
- Width: 0.22 to 0.47
from NBK America LLC
Set collar for securing bearings. It can be fixed by pressing the bearing inner wheel only on the convex of the main body. Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft. Clamping Type. Mounting and removing are easy. Moreover this does not scratch the... [See More]
- Units: Metric
- Width: 0.43
- Collar Type: One Piece Clamp Style (Non-Threaded)
- O.D.: 1.18
from Ruland Manufacturing Co., Inc.
Features. Reduced width for confined spaces. Well suited for encoder applications. Light-weight. Does not mar the shaft. Superior fit, finish and holding power. Additional sizes available. RoHS2 and REACH Compliant. Width tolerance: +.076mm/-.254mm. Bore tolerance: +.050mm/+.012mm. Temperature Range... [See More]
- Units: Metric
- Features: Opposing Screws
- Collar Type: Two piece Clamp Style
- Collar Material: Aluminum; Stainless Steel
from NBK America LLC
Set collar for securing bearing. It can be fixed by pressing the bearing inner wheel only on the convex of the main body. Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft. It is attached to the shaft by the set screws. [See More]
- Units: Metric
- Width: 0.43
- Collar Type: One Piece Set Screw
- O.D.: 0.39
from NBK America LLC
Set collar for securing bearing. It can be fixed by pressing the bearing inner wheel only on the convex of the main body. Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft. It is attached to the shaft by the set screws. [See More]
- Units: Metric
- Width: 0.43
- Collar Type: One Piece Set Screw
- O.D.: 0.79
from NBK America LLC
Standard type set collar. It is attached to the shaft by the set screws. Chamfer on one side end face is larger (bore diameter 8 mm or above). This avoids interference of the set collar with the external wheel when the bearing is fixed. [See More]
- Units: Metric
- Width: 0.39
- Collar Type: One Piece Set Screw
- O.D.: 0.39
from NBK America LLC
Standard type set collar. It is attached to the shaft by the set screws. Chamfer on one side end face is larger (bore diameter 8 mm or above). This avoids interference of the set collar with the external wheel when the bearing is fixed. [See More]
- Units: Metric
- Width: 0.39
- Collar Type: One Piece Set Screw
- O.D.: 0.79
from NBK America LLC
Standard type set collar. It is attached to the shaft by the set screws. Chamfer on one side end face is larger (bore diameter 8 mm or above). This avoids interference of the set collar with the external wheel when the bearing is fixed. [See More]
- Units: Metric
- Width: 0.39
- Collar Type: One Piece Set Screw
- O.D.: 0.79
from NBK America LLC
Split-type set collar. As the axial hole part can be completely split, so mounting and removing can be performed easily. Moreover this does not scratch the shaft. Optimal for use with machines and devices that are difficult to disassemble. [See More]
- Units: Metric
- O.D.: 1.18
- Width: 0.39
from NBK America LLC
Split-type set collar. As the axial hole part can be completely split, so mounting and removing can be performed easily. Moreover this does not scratch the shaft. Optimal for use with machines and devices that are difficult to disassemble. [See More]
- Units: Metric
- O.D.: 1.18
- Width: 0.39
from NBK America LLC
Split-type set collar. As the axial hole part can be completely split, so mounting and removing can be performed easily. Moreover this does not scratch the shaft. Optimal for use with machines and devices that are difficult to disassemble. [See More]
- Units: Metric
- O.D.: 1.18
- Width: 0.39
from NBK America LLC
Set collar with installation hole. It can be installed to any machine and device such as wheels, flanges and plates, by using the fixing hole. Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft. Optimal for machines and devices that are frequently... [See More]
- Units: Metric
- Width: 0.39
- Collar Type: One Piece Clamp Style (Non-Threaded)
- O.D.: 1.18
from NBK America LLC
Set collar with installation hole. It can be installed to any machine and device such as wheels, flanges and plates, by using the fixing hole. Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft. Optimal for machines and devices that are frequently... [See More]
- Units: Metric
- Width: 0.39
- Collar Type: One Piece Clamp Style (Non-Threaded)
- O.D.: 1.18
from NBK America LLC
Set collar with installation hole. It can be installed to any machine and device such as wheels, flanges and plates, by using the fixing hole. Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft. Optimal for machines and devices that are frequently... [See More]
- Units: Metric
- Width: 0.39
- Collar Type: One Piece Clamp Style (Non-Threaded)
- O.D.: 1.18