Graphite / Metal Alloy Plain Bearings and Sleeve Bearings
from Radwell International
BUSHING, GRAPHITE. FREE 2 YEAR RADWELL WARRANTY [See More]
- Bearing Surface: Graphite / Metal Alloy
from GGB
STRUCTURE. Thin Walled Bimetal Bearing produced by Metallurgic Powder Process. CHARACTERISTICS. Self-lubricating and maintenance-free with homogeneously distributed solid lubricant (graphite) in the sliding layer. High load capacity and suited to temperatures from -150 °C up to 280 °C. [See More]
- Bearing Surface: Graphite / Metal Alloy; Bronze Based (Lined Bearing Surface)
- Body: Steel
- Bushing Type: Sleeve
- Operating Temperature: -238 to 536
from Radwell International
GUIDE PIN BUSHING,SELF LUBRICATING BUSHING ,3 X 3.5 X 4IN,BRONZE/GRAPHITE. FREE 2 YEAR RADWELL WARRANTY [See More]
- Bearing Surface: Bronze - Sintered; Graphite / Metal Alloy
from GGB
STRUCTURE. Monometallic Bearing produced by Metallurgic Powder Process. CHARACTERISTICS. Self-lubricating and maintenance-free with homogeneously distributed solid lubricant (graphite, MoS2) in the metallic matrix. High load capacity and temperature ranges up to 600 °C possible depending on the... [See More]
- Bearing Surface: Graphite / Metal Alloy
- Operating Temperature: -328 to 1112
- Bushing Type: Sleeve; Flanged
from Radwell International
GUIDE PIN BUSHING,SELF LUBRICATING BUSHING, 80X100X100MM,BRONZE/GRAPHITE. FREE 2 YEAR RADWELL WARRANTY [See More]
- Bearing Surface: Bronze - Sintered; Graphite / Metal Alloy
from Radwell International
DISCONTINUED BY MANUFACTURER, GRAPHITE BUSHING, 2 INCH I.D., COVER CARB. FREE 2 YEAR RADWELL WARRANTY [See More]
- Bearing Surface: Graphite / Metal Alloy
from Radwell International
BUSHING, FINISHED BORE, 1-1/2 IN BORE DIA, 2.187 IN BARREL DIA, 2-11/16 IN BOLT CIRCLE, 3-1/8 IN FLANGE DIA, 7/16 IN FLANGE THICKNESS, 1/4-20 1-3/8 IN SCREW, 6 FT-LB, 1-5/16 IN OVERALL LENGTH, 3/8 3/16 IN KEYWAY, NODULAR GRAPHITE CAST IRON. FREE 2 YEAR RADWELL WARRANTY [See More]
- Bearing Surface: Graphite / Metal Alloy
- Bushing Type: Flanged
from Radwell International
FINISHED BORE, 1-1/2 IN BORE DIA, 2.187 IN BARREL DIA, 2-11/16 IN BOLT CIRCLE, 3-1/8 IN FLANGE DIA, 7/16 IN FLANGE THICKNESS, 1/4-20 1-3/8 IN SCREW, 6 FT-LB, 1-5/16 IN OVERALL LENGTH, 3/8 3/16 IN KEYWAY, NODULAR GRAPHITE CAST IRON. FREE 2 YEAR RADWELL WARRANTY [See More]
- Bearing Surface: Graphite / Metal Alloy
- Bushing Type: Flanged
from Radwell International
GRAPHITE PLUGGED BRONZE BUSHING 20X28X30MMM. FREE 2 YEAR RADWELL WARRANTY [See More]
- Bearing Surface: Bronze - Sintered; Graphite / Metal Alloy
from Radwell International
GRAPHITE PLUGGED BRONZE BUSHING 30X38X60. FREE 2 YEAR RADWELL WARRANTY [See More]
- Bearing Surface: Bronze - Sintered; Graphite / Metal Alloy
from Radwell International
GRAPHITE PLUGGED BRONZE BUSHING 15X21X20MM. FREE 2 YEAR RADWELL WARRANTY [See More]
- Bearing Surface: Bronze - Sintered; Graphite / Metal Alloy
from Radwell International
GRAPHITE PLUGGED BRONZE BUSHING 50X65X50MM. FREE 2 YEAR RADWELL WARRANTY [See More]
- Bearing Surface: Bronze - Sintered; Graphite / Metal Alloy
from TriStar Plastics Corp.
Bearing grade polyester/graphite composite. High-load, high-impact and slow-speed applications. Vibration and abrasion resistant. Self-lubricating with low-moisture absorption. Runs best on shafts with RC30 or higher. [See More]
- Bearing Surface: Graphite / Metal Alloy; Plastic
- Design Units: Inch
- Bushing Type: Sleeve
- Self-lubricating: Self-Lubricating / Oil Impregnated
from RegalRexnord
5/8" Mounted Carbon Graphite, Self-Lubricating Sleeve Bearing, Cast Iron 2-Bolt Flange Block [See More]
- Bearing Surface: Graphite / Metal Alloy
- Design Units: Inch
- Bushing Type: Flanged
- Shaft OD: 0.6250
from Bowman International Ltd.
Offered with lubrication pockets, grooves or thru holes. Used for heavy load applications. [See More]
- Bearing Surface: Graphite / Metal Alloy
- Design Units: Metric
- Bushing Type: Flanged
- Shaft OD: 0.9843 to 11.8110
from FTL Technology
Composite bearings are manufactured from thermosetting resins reinforced with synthetic fibres. The physical and mechanical properties of this composite material make it an excellent bearing material. By varying the fabric reinforcement and the resin used, the physical and chemical properties of the... [See More]
- Bearing Surface: Graphite / Metal Alloy
- Bushing Type: Sleeve
from Saint-Gobain Performance Plastics - Bearings and Tolerance Rings
NORGLIDE ® is a composite material of NORGLIDE ® MP bearing tape and steel backing. This combination of material improves load capabilities while maintaining the characteristics of NORGLIDE ® MP, especially its sizing capability. The bearings can be designed without play. [See More]
- Bearing Surface: Graphite / Metal Alloy; Glass (Lined Bearing Surface)
- Design Units: Metric
- Bushing Type: Sleeve (optional feature); Flanged (optional feature)
- Flange Thickness: 0.030
from OILES America Corporation
Oiles Hiplast is a self-lubricating bearing consisting of expanded bronze mesh encapsulated within proprietary Tetrafluorothylene (PTFE) resin. Hiplast does not have a steel backing but utilizes the bronze mesh to provide structural and dimensional integrity. Extremely lightweight and very narrow... [See More]
- Bearing Surface: Graphite / Metal Alloy
- Design Units: Metric
- Bushing Type: Flanged
- Shaft OD: 0.1947 to 0.1953
from RegalRexnord
5/8" Self Lubricating Carbon Graphite Replacement Insert for Series 3200 Flex-Block Sleeve Bearing [See More]
- Bearing Surface: Graphite / Metal Alloy
- Design Units: Inch
- Bushing Type: Sleeve
- Shaft OD: 0.6250
from Bowman International Ltd.
Offered with lubrication pockets, grooves or thru holes. Used for heavy load applications. [See More]
- Bearing Surface: Graphite / Metal Alloy
- Design Units: Metric
- Bushing Type: Sleeve
- Shaft OD: 0.3937 to 9.0551
from Saint-Gobain Performance Plastics - Bearings and Tolerance Rings
NORGLIDE ® MP is a maintenance-free bearing material with a woven metal fabric encapsulated in a wear-resistant PTFE compound which offers high-load capabilities. This combination of materials enables easy manual or automatic processing and installation. NORGLIDE ® MP can be adapted... [See More]
- Bearing Surface: Graphite / Metal Alloy; Glass
- Design Units: Inch (optional feature); Metric (optional feature)
- Bushing Type: Sleeve (optional feature); Flanged (optional feature)
- Flange Thickness: 0.019
from RegalRexnord
1" Mounted Carbon Graphite, Self-Lubricating Sleeve Bearing, Cast Iron 4-Bolt Square Flange Block [See More]
- Bearing Surface: Graphite / Metal Alloy
- Design Units: Inch
- Bushing Type: Flanged
- Shaft OD: 1.0000
from Saint-Gobain Performance Plastics - Bearings and Tolerance Rings
NORGLIDE ® SM is a composite material of compounded PTFE, bronze stretched metal and steel backing. This material structure combines the bearing characteristics of PTFE compound tape with the sizing capabilities of stretched metal. These bearings can also be designed without play. Bearings of 1... [See More]
- Bearing Surface: Graphite / Metal Alloy; Carbon (Lined Bearing Surface)
- Design Units: Inch (optional feature); Metric (optional feature)
- Bushing Type: Sleeve (optional feature); Flanged (optional feature)
- Flange Thickness: 0.027
from RegalRexnord
1 7/16" Mounted Carbon Graphite, Self-Lubricating Sleeve Bearing, Cast Iron 4-Bolt Square Flange Block [See More]
- Bearing Surface: Graphite / Metal Alloy
- Design Units: Inch
- Bushing Type: Flanged
- Shaft OD: 1.4375
from Saint-Gobain Performance Plastics - Bearings and Tolerance Rings
NORGLIDE ® SMTL is a composite material of compounded PTFE, bronze stretched metal and steel backing. In contrast to NORGLIDE ® SM, the bronze stretched metal in NORGLIDE ® SMTL is separately precompressed and the PTFE compound tape is thinner, which improves load... [See More]
- Bearing Surface: Graphite / Metal Alloy; Plastic (Lined Bearing Surface)
- Design Units: Inch (optional feature); Metric (optional feature)
- Bushing Type: Sleeve (optional feature); Flanged (optional feature)
- Flange Thickness: 0.020
from Saint-Gobain Performance Plastics - Bearings and Tolerance Rings
NORGLIDE ® T is a composite material of compounded PTFE tape on a metal shell. This material structure enables machining of the bearing in the housing--which is an alternative to the sizing process--to obtain tightest tolerances on the inside diameter. The very thick PTFE layer isolates... [See More]
- Bearing Surface: Graphite / Metal Alloy; Carbon (Lined Bearing Surface)
- Design Units: Metric
- Bushing Type: Sleeve (optional feature); Flanged (optional feature)
- Flange Thickness: 0.020