Sleeve Plain Bearings and Sleeve Bearings
from Accurate Bushing Company, Inc.
Inner ring races are hardened, ground, and are used as bushings or sleeves. They are complete with radial oil holes and annular lubrication groove. [See More]
- Bushing Type: Sleeve
- Bearing ID: 1.0000
- Design Units: Inch
- Bearing OD: 1.2491
from Waukesha Bearings
Waukesha Bearings supplies medium and thick wall journal bearings specifically designed for turbomachinery. Several configurations are available to handle application needs for load capacity, rotating load, stiffness, damping, and rotordynamic stability. The addition of grooves to fixed profile... [See More]
- Bushing Type: Sleeve; Flanged
from Stock Drive Products & Sterling Instrument - SDP/SI
A bearing is a device that reduces friction between moving components by preventing metal-to-metal contact while assisting components (shafts, axles, and wheels) to freely rotate around a fixed axis, cutting down on heat generation and the amount of energy that is consumed. By replacing sliding... [See More]
- Bushing Type: Sleeve
- Length: 0.187
- Bearing ID: 0.1260
from RS Components, Ltd.
RS PRO AM 101625 Plain Bearing [See More]
- Bushing Type: Sleeve
- Bearing Surface: Oil Retaining Tin Bronze
- Bearing OD: 0.6299
from FHD Bearings Co., Ltd.
Adapter sleeve for oil injection mounting with KMFE lock nut, metric dimensions. Adapter sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seat as they can be used on plain shafts or stepped shafts. These sleeves enable use of the oil... [See More]
- Bushing Type: Sleeve
- Design Units: Metric
from Caplugs
The OCB Series open/closed bushings allow for side entry and encirclement of pre-assembled harnesses, capillary tubes, or other assemblies that have segments larger than the bushing 's internal diameter. The OCB series is also ideal for holes that already contain cable or tubing. Installation... [See More]
- Bushing Type: Sleeve
- Bearing ID: 1.2500
- Design Units: Inch
- Bearing OD: 1.5800
from C-Flex Bearing Company
The C-Flex patent pending progressive clamp bushing, utilizes force multiplying technology to generate large clamping forces with multi-surface contact. • HARDENED STAINLESS STEEL. • PATENT PENDING DESIGN. • DESIGNED FOR USE WITH STD. TWO SET SCREW COLLAR (90 DEG. OFFSET). • WILL... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1250 to 1.1250
- Design Units: Inch; Metric
- Bearing OD: 0.2500 to 1.2500
from GGB
APPLICATIONS. Automotive – Transmissions, king pin, truck brake caliper. Industrial – Agricultural machinery, earth-movers, textile machinery, pneumatic equipment, mechanical handling and lifting equipment, hydraulic cylinders, off highway equipment, and many more. CHARACTERISTICS. [See More]
- Bushing Type: Sleeve
from Waukesha Bearings
Waukesha Bearings provides uniquely engineered multi-lobe semi-floating bearings that improve stability and ensure long life and maximum reliability compared to conventional floating ring bearings. Using proven technology, MLSF ® bearings are designed to run at optimum temperatures with minimal... [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.5000
- Design Units: Inch
- Bearing Surface: Bronze - Sintered
from Stock Drive Products & Sterling Instrument - SDP/SI
A bearing is a device that reduces friction between moving components by preventing metal-to-metal contact while assisting components (shafts, axles, and wheels) to freely rotate around a fixed axis, cutting down on heat generation and the amount of energy that is consumed. By replacing sliding... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.0627
- Design Units: Inch
- Bearing OD: 0.1876
from RS Components, Ltd.
RS PRO AM 202625 Plain Bearing [See More]
- Bushing Type: Sleeve
- Bearing Surface: Oil Retaining Tin Bronze
- Bearing OD: 1.0236
from FHD Bearings Co., Ltd.
Adapter sleeve with KM lock nut and MB lock washer, metric dimensions. Adapter sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seat as they can be used on plain shafts or stepped shafts. They are slit and are supplied complete with a KM lock... [See More]
- Bushing Type: Sleeve
- Design Units: Metric
from Caplugs
SB Series snap bushings converts raw-edged holes to smooth, neat, insulated holes. Once in place these bushings will withstand a push-back force of 35 pounds. The nylon material will insulate and mechanically protect electrical and telecommunication cables, tubing, hoses and utility lines. [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.7660
- Design Units: Inch
- Bearing OD: 1.1300
from GGB
STRUCTURE. Case Hardened Steel Bearing. CHARACTERISTICS. For lubricated applications. With plain or grooved sliding layer. Suitable for grease lubrication. Low rotation speed with high specific pressure. BEARING PROPERTIES. GENERAL. Unit. Value. Maximum load, p. Static. Dynamic. N/mm. 2. N/mm2. 300. [See More]
- Bushing Type: Sleeve
- Operating Temperature: ? to 302
- Tensile Strength: 79770
from Waukesha Bearings
Waukesha Bearings custom engineers each tilt pad journal (radial) bearing to not only handle the required loads but also provide optimum static and dynamic performance. Pad arc, pivot offset, bearing clearance, length of the bearing, and preload are each carefully considered, as they can affect such... [See More]
- Bushing Type: Sleeve; Flanged
- Body: Standard Pads are Steel
- Bearing Surface: Standard Pads Have Babbitt Lining (Lined Bearing Surface)
from Stock Drive Products & Sterling Instrument - SDP/SI
A bearing is a device that reduces friction between moving components by preventing metal-to-metal contact while assisting components (shafts, axles, and wheels) to freely rotate around a fixed axis, cutting down on heat generation and the amount of energy that is consumed. By replacing sliding... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1245
- Design Units: Inch
- Bearing OD: 0.2215
from RS Components, Ltd.
RS PRO AM 202630 Plain Bearing [See More]
- Bushing Type: Sleeve
- Bearing Surface: Oil Retaining Tin Bronze
- Bearing OD: 1.0236
from FHD Bearings Co., Ltd.
Adapter sleeve with KMFE lock nut, metric dimensions. Adapter sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seat as they can be used on plain shafts or stepped shafts. They are slit and are supplied complete with a KMFE lock nut. Easy to... [See More]
- Bushing Type: Sleeve
- Design Units: Metric
from Caplugs
UB Series universal bushings feature flexible shutters that will adjust and accommodate any shape from 1/8 " to 1 ". These nylon bushings will absorb vibration while cushioning and insulating cables, tubing, hoses, and shafts. Only fingertip pressure required for installation. Material:... [See More]
- Bushing Type: Sleeve
- Bearing OD: 1.4900
- Design Units: Inch
- Length: 0.450
from GGB
Our metal-backed, PTFE-based (polytetrafluoroethylene) polymer bearing materials have a common structure, consisting of a metal backing bonded to a porous bronze sinter layer. This bronze sinter layer is impregnated and overlaid with the filled PTFE bearing lining. The metal backing provides... [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.0785 to 0.0787
- Design Units: Metric
- Housing Bore: 0.1378 to 0.1381
from Waukesha Bearings
Flexure Pivot ® tilt pad journal bearings are a leading bearing solution for high-load, high-speed, small-diameter shafts. They achieve low cross-coupling and high stability while eliminating pivot wear, high contact stresses and pad flutter. Typical Applications. Integrally geared air/process... [See More]
- Bushing Type: Sleeve; Flanged
from Stock Drive Products & Sterling Instrument - SDP/SI
A bearing is a device that reduces friction between moving components by preventing metal-to-metal contact while assisting components (shafts, axles, and wheels) to freely rotate around a fixed axis, cutting down on heat generation and the amount of energy that is consumed. By replacing sliding... [See More]
- Bushing Type: Sleeve
- Housing Bore: 0.1260
from RS Components, Ltd.
RS PRO AM 202825 Plain Bearing [See More]
- Bushing Type: Sleeve
- Bearing Surface: Oil Retaining Tin Bronze
- Bearing OD: 1.1024
from FHD Bearings Co., Ltd.
Common Linear Sleeve Bearings. Linear Sleeve Bearings, also known as bushings, are cylindrical components designed to provide linear motion with minimal friction. Constructed from materials such as bronze, plastic, or composite polymers, these bearings offer a cost-effective solution for various... [See More]
- Bushing Type: Sleeve
- Bearing OD: 0.3748
- Design Units: Metric
- Length: 0.562
from GGB
High load capacity. Good chemical resistance. Machinable bearing surface. High rotational speed capability. Very good friction and wear properties. Excellent contamination resistance. [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.7864 to 0.7874
- Design Units: Metric
- Housing Bore: 0.9843 to 0.9852
from Waukesha Bearings
As rotating equipment has grown and efficiency requirements increased, the Maxalign ® bearing has answered the imperative for a bearing with greater capabilities for handling misalignment and reducing power loss. With 30+ years of proven experience and design flexibility on large rotating plant... [See More]
- Bushing Type: Sleeve; Flanged
from Stock Drive Products & Sterling Instrument - SDP/SI
A bearing is a device that reduces friction between moving components by preventing metal-to-metal contact while assisting components (shafts, axles, and wheels) to freely rotate around a fixed axis, cutting down on heat generation and the amount of energy that is consumed. By replacing sliding... [See More]
- Bushing Type: Sleeve; Flanged
- Shaft OD: 0.1865 to 0.1875
- Design Units: Inch
- Housing Bore: 0.1875
from RS Components, Ltd.
RS PRO AM 202830 Plain Bearing [See More]
- Bushing Type: Sleeve
- Bearing Surface: Oil Retaining Tin Bronze
- Bearing OD: 1.1024
from FHD Bearings Co., Ltd.
High-Speed Linear Sleeve Bearings. Linear Sleeve Bearings, also known as bushings, are cylindrical components designed to provide linear motion with minimal friction. Constructed from materials such as bronze, plastic, or composite polymers, these bearings offer a cost-effective solution for various... [See More]
- Bushing Type: Sleeve
- Bearing OD: 0.5000
- Design Units: Metric
- Length: 0.750
from GGB
High load capacity. Excellent shock resistance. Excellent contamination resistance. Excellent misalignment resistance. Very Good friction and wear properties. Good chemical resistance. [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.7495 to 0.7500
- Design Units: Inch
- Housing Bore: 1.0000 to 1.0005
from Stock Drive Products & Sterling Instrument - SDP/SI
A bearing is a device that reduces friction between moving components by preventing metal-to-metal contact while assisting components (shafts, axles, and wheels) to freely rotate around a fixed axis, cutting down on heat generation and the amount of energy that is consumed. By replacing sliding... [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.1865 to 0.1875
- Design Units: Inch
- Housing Bore: 0.1875
from RS Components, Ltd.
RS PRO AM 303820 Plain Bearing [See More]
- Bushing Type: Sleeve
- Bearing Surface: Oil Retaining Tin Bronze
- Bearing OD: 1.4961
from FHD Bearings Co., Ltd.
Ultra-Thin Linear Sleeve Bearings. Linear Sleeve Bearings, also known as bushings, are cylindrical components designed to provide linear motion with minimal friction. Constructed from materials such as bronze, plastic, or composite polymers, these bearings offer a cost-effective solution for various... [See More]
- Bushing Type: Sleeve
- Bearing OD: 0.4724
- Design Units: Metric
- Length: 0.866
from GGB
High load capacity. Excellent shock resistance. Excellent contamination resistance. Excellent misalignment resistance. Very Good friction and wear properties. Good chemical resistance. [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.7495 to 0.7500
- Design Units: Inch
- Housing Bore: 1.2500 to 1.2505
from Stock Drive Products & Sterling Instrument - SDP/SI
A bearing is a device that reduces friction between moving components by preventing metal-to-metal contact while assisting components (shafts, axles, and wheels) to freely rotate around a fixed axis, cutting down on heat generation and the amount of energy that is consumed. By replacing sliding... [See More]
- Bushing Type: Sleeve
- Housing Bore: 0.1880
from RS Components, Ltd.
RS PRO AM 303825 Plain Bearing [See More]
- Bushing Type: Sleeve
- Bearing Surface: Oil Retaining Tin Bronze
- Bearing OD: 1.4961
from FHD Bearings Co., Ltd.
Linear Sleeve Bearings for Support Rail Shafts. Linear Sleeve Bearings, also known as bushings, are cylindrical components designed to provide linear motion with minimal friction. Constructed from materials such as bronze, plastic, or composite polymers, these bearings offer a cost-effective... [See More]
- Bushing Type: Sleeve
- Bearing OD: 0.5000
- Design Units: Metric
- Length: 0.750
from GGB
STRUCTURE. Fiber and Epoxy Resin Composite Material. CHARACTERISTICS. Machinable inner and outer diameters for superior application precision, circularity and cylindricity tolerances. Pre-machined high precision HPMB bearings available for immediate installation. High precision through easy single... [See More]
- Bushing Type: Sleeve
- Bearing Surface: Fiber and Epoxy Resin Composite Material
- Design Units: Metric
- Tensile Strength: 20305 to 30458
from Stock Drive Products & Sterling Instrument - SDP/SI
A bearing is a device that reduces friction between moving components by preventing metal-to-metal contact while assisting components (shafts, axles, and wheels) to freely rotate around a fixed axis, cutting down on heat generation and the amount of energy that is consumed. By replacing sliding... [See More]
- Bushing Type: Sleeve
- Length: 0.250
from RS Components, Ltd.
RS PRO AM 303830 Plain Bearing [See More]
- Bushing Type: Sleeve
- Bearing Surface: Oil Retaining Tin Bronze
- Bearing OD: 1.4961
from FHD Bearings Co., Ltd.
Mounted Linear Sleeve Bearings. Mounted Linear Sleeve Bearings are practical components designed for efficient linear motion within machinery. These bearings, comprising a sleeve and a housing unit, offer cost-effective solutions for applications requiring minimal friction. With easy installation... [See More]
- Bushing Type: Sleeve
- Length: 1.625
- Design Units: Metric
- Bearing Surface: Anodized 6061 Aluminum
from GGB
PRODUCT'S BENEFITS Quality materials you can rely on Quality/Reliability Material allows for compact design Common to One Piece Compact Design Material offers good wear resistance Increased Wear Resistance Material helps extend application's service life Extended service life Material operates well... [See More]
- Bushing Type: Sleeve
- Self-lubricating: Self-Lubricating / Oil Impregnated
- Bearing Surface: Bronze - Sintered
from Stock Drive Products & Sterling Instrument - SDP/SI
A bearing is a device that reduces friction between moving components by preventing metal-to-metal contact while assisting components (shafts, axles, and wheels) to freely rotate around a fixed axis, cutting down on heat generation and the amount of energy that is consumed. By replacing sliding... [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.3927 to 0.3937
- Design Units: Metric
- Housing Bore: 0.3937
from RS Components, Ltd.
RS PRO AM 303840 Plain Bearing [See More]
- Bushing Type: Sleeve
- Bearing Surface: Oil Retaining Tin Bronze
- Bearing OD: 1.4961
from FHD Bearings Co., Ltd.
Mounted Linear Sleeve Bearings for Support Rail Shafts. Mounted Linear Sleeve Bearings are practical components designed for efficient linear motion within machinery. These bearings, comprising a sleeve and a housing unit, offer cost-effective solutions for applications requiring minimal friction. [See More]
- Bushing Type: Sleeve
- Length: 2.000
- Design Units: Metric
- Bearing Surface: Anodized 6061 Aluminum
from GGB
PRODUCT'S BENEFITS Quality materials you can rely on Quality/Reliability Material allows for compact design Common to One Piece Compact Design Material helps extend application's service life Extended service life Material operates well in dry environment Dry operation Material provides dimensional... [See More]
- Bushing Type: Sleeve
- Self-lubricating: Self-Lubricating / Oil Impregnated
- Bearing Surface: Oil Impregnated Sintered Steel Bearings Similar to SINT A 10, Impregnation Group 1
from Stock Drive Products & Sterling Instrument - SDP/SI
A bearing is a device that reduces friction between moving components by preventing metal-to-metal contact while assisting components (shafts, axles, and wheels) to freely rotate around a fixed axis, cutting down on heat generation and the amount of energy that is consumed. By replacing sliding... [See More]
- Bushing Type: Sleeve; Flanged
- Shaft OD: 0.3927 to 0.3937
- Design Units: Metric
- Housing Bore: 0.3937
from RS Components, Ltd.
RS PRO AM 304025 Plain Bearing [See More]
- Bushing Type: Sleeve
- Bearing Surface: Oil Retaining Tin Bronze
- Bearing OD: 1.5748
from GGB
PRODUCT'S BENEFITS Material allows for simple assembly Simple assembly Material helps reduce total system cost Reduced System Cost Material eliminates/reduces maintenance Maintenance Free Operation Material offers good wear resistance Increased Wear Resistance Material withstands high loads High... [See More]
- Bushing Type: Sleeve
- Tensile Strength: 20305 to 30458
- Bearing Surface: Plastic; Fiber Reinforced Composite Material with Seals
- Operating Temperature: 93 to 104
from Stock Drive Products & Sterling Instrument - SDP/SI
A bearing is a device that reduces friction between moving components by preventing metal-to-metal contact while assisting components (shafts, axles, and wheels) to freely rotate around a fixed axis, cutting down on heat generation and the amount of energy that is consumed. By replacing sliding... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.3937
- Design Units: Metric
- Bearing OD: 0.7480
from RS Components, Ltd.
RS PRO AM 304035 Plain Bearing [See More]
- Bushing Type: Sleeve
- Bearing Surface: Oil Retaining Tin Bronze
- Bearing OD: 1.5748
from GGB
PRODUCT'S BENEFITS Material allows for simple assembly Simple assembly Material helps reduce total system cost Reduced System Cost Quality materials you can rely on Quality/Reliability Material eliminates/reduces maintenance Maintenance Free Operation Material offers good wear resistance Increased... [See More]
- Bushing Type: Sleeve
- Bearing Surface: Plastic; Fiber Reinforced Composite Material with Seals
from Swiss Jewel Company
Sapphire Tubes are available in a range of sizes and can be held tighter in tolerance than metal. Stock sizes start with ID .015" and can be made up to almost any ID and OD. Sapphire Tubes are excellent choice for feed-through applications due to material strength. Typical Sapphire Tube... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.0140 to 0.1570
- Design Units: Inch
- Bearing OD: 0.0493 to 0.1770
from Boston Gear
Overview. Bear-N-Bronz ® is Boston Gear's general purpose, cast, solid bronze bearing material. It is a high grade, leaded tin bronze, having good hardness, strength, wear-resistance and exceptional anti-friction qualities. It is particularly suited for moderate to heavy loads at normal to... [See More]
- Bushing Type: Sleeve
- Tensile Strength: 35000
from National Precision Bearing, Inc.
Loads - P. • Dynamic loads up to 20,000 PSI. • Static loads up to 36,000 PSI. • Compressive yield strength of 44,000 PSI. Speed - V. • Up to 1000 FPM unlubricated. • Up to 2000 FPM lubricated. Performance - PV. • PV to 50,000 PSI - FPM - continuous operation. • PV... [See More]
- Bushing Type: Sleeve
- Shaft OD: 2.1257 to 6.9929
- Design Units: Inch
- Housing Bore: 2.3118 to 7.1830
from igus® inc.
iglide ® H370 plastic bushings are designed for underwater applications. The bushings absorb extremely high loads, are chemical resistant and can be used at temperatures up to 392 °F. When to use iglide ® H370 bushings?. For use underwater. When high temperature resistance is needed. [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1250 to 1.2500
- Design Units: Metric
- Bearing OD: 0.1875 to 1.4062
from FTL Technology
Self-lubricating carbon/graphite bearings are ideal for applications where marginal or zero lubrication exists. Additives, including metal alloys, can improve the performance of carbon/graphite bearings. These impregnated composite materials allow bearings to be use in more extreme applications than... [See More]
- Bushing Type: Sleeve
from Saint-Gobain Performance Plastics - Bearings and Tolerance Rings
Traditionally, for plain bearings, manufacturing tolerance ranges can cause high friction variation. To keep the friction low and reduce the variation, large clearance is required, which can cause rattle noise. The SPRINGLIDE ™ Energised Bearing solution, with consistent friction throughout... [See More]
- Bushing Type: Sleeve
- Design Units: Inch (optional feature); Metric (optional feature)
from RBC Bearings
This CJM series metric Fiberglide Journal bearing comes with a coiled steel backing. It is designed to meet industry standards for self-lubricating bushings. Carbon steel is normally used as backing material, with the external surfaces plated to resist corrosion. [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.3139 to 0.3144
- Design Units: Metric
- Housing Bore: 0.3937 to 0.3943
from Hallite Seals International Ltd.
DesignThe Hallite 533G bearing is a version of the Hallite 533, which has axial grooves to allow fluid bypass. This bearing is most often used in hydraulic ram application where such a feature is required. Like the standard 533 bearing the 533G is compatible with hydraulic and lubricating oil. It is... [See More]
- Bushing Type: Sleeve
- Bearing ID: 2.2500 to 9.6280
- Design Units: Inch
- Bearing OD: 2.5000 to 9.8780
from Schaeffler Technologies AG & Co. KG
The right plain bearing for every application. The Schaeffler Group produces and distributes a wide range of high-quality plain bearings with the INA brand. These include plain bushes with ELGOTEX ® and ELGOGLIDE ® as well as metal-polymer composite plain bearings. There is also a proven... [See More]
- Bushing Type: Sleeve
from Bowman International Ltd.
Suitable for rotary and oscillating movement, lower maintenance requirements due to the long re-lubrication intervals, lower wear, lower susceptibility to edge loading, no absorption of water and therefore no swelling, good damping behaviours, good resistance to shock loads. Typical Applications. [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.3750 to 4.0000
- Design Units: Inch
- Bearing ID: 0.3750 to 4.0000
from Radwell International
BUNTING BUSHING, PLAIN SLEEVE, 5/8 OD X 1/2 ID X 1/2IN, POWDERED METAL. FREE 2 YEAR RADWELL WARRANTY [See More]
- Bushing Type: Sleeve
from Daemar Inc.
Oil-free & self lubricating, available in a range of engineering polymers depending on the application. Designed to be cost efficient compared with metal bushings, plastic bushings are ideal for light, maintenance free applications. [See More]
- Bushing Type: Sleeve
from Specialty Product Technologies
Type 1 Thomson Nyliner bearings are plastic sleeve bearings with a carbon steel outer sleeve and a circumferential lubrication groove. Additionally, Type 1 plastic sleeve bearings can be supplied with an optional nickel-plated steel outer sleeves for use in applications that will involve mildly... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.2500 to 1.1250
- Design Units: Inch
- Bearing Surface: Plastic
from TriStar Plastics Corp.
CJ Composite bearings excel where long wear and low maintenance matter most - in agriculture, automotive, construction, marine, railroad and material handling equipment. With a high load capacity similar to bronze, powdered metal and steel, CJ bearings can extend the operating life of your... [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.4724
- Design Units: Metric
- Housing Bore: 0.6693
from DME Company
D-M-E Bronze-Plated Guided Ejection Bushings feature the strength of steel plus the non-scoring lubricity of bronze plating. Internal oil grooves and a lubrication hole help to ensure smoother mold operation. It is recommended that a minimum of four bushings be installed. The size of the bushings... [See More]
- Bushing Type: Sleeve
- Shaft OD: 1.1255 to 3.7505
- Design Units: Inch
- Bearing ID: 0.7500 to 3.0000
from Bunting Bearings, LLC
The SAE 841 range has been extended even further for the food industry with the Bunting 841 ECO range. This range of bearings gives you the benefit of being USDA H-1 approved. Temperature range: 10 °F/+220 °F [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1250 to 4.0000
- Design Units: Inch
- Bearing OD: 0.1875 to 4.5000
from Spyraflo, Inc.
Steel side frame applications requiring serviceability are also ideally suited for the press-fit retainer. Features. The Press-Fit retainer takes the entire load associated with an interference installation fit without affecting the bearing ID. [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1255 to 0.1260
- Design Units: Inch
- Bearing OD: 0.3440
from AST Bearings LLC
Please review the technical information on the requirements for the mating shaft. [See More]
- Bushing Type: Sleeve
- Housing Bore: 4.1339
- Shaft OD: 3.9370
- Bearing ID: 3.9370
from OILES America Corporation
Cermet bearings and material are comprised of a proprietary blend of sintered copper alloys and evenly dispersed solid lubricants. Designed to replace oil impregnated bushings and plastic bearings, Cermet offers greater load and temperature service without external lubrication. Cermet M and Cermet G... [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.1181
- Design Units: Metric
- Housing Bore: 0.2362
from Miba Industrial Bearings
Fixed Geometry Bearings for rotating Equipment. Fixed geometry bearings can be used in blowers, gas turbines, steam turbines, compressors, pumps, turbochargers and generators. Using Miba Fixed Geometry Bearings (or Sleeve Bearings) is an economical way to achieve good rotor dynamic performance. Miba... [See More]
- Bushing Type: Sleeve; Flanged
- Bearing ID: ? to 32.0000
- Design Units: Inch
- Bearing Surface: Bronze, Steel/White Metal; Peak
from CoorsTek
Bearings & Bushings. CoorsTek bushings and bearings are engineered for high durability and reliability. Our complete manufacturing process control, from forming to finishing, allows us to maintain the highest standards for each of our components. Bearing & Bushing Assembly. CoorsTek offers a... [See More]
- Bushing Type: Sleeve; Flanged
- Bearing Surface: Ceramic: Zirconia, Tungsten Carbide, Alumina
from RegalRexnord
Duralon Filament Bearing - Catalogue Thinwall Series [See More]
- Bushing Type: Sleeve
- Bearing OD: 0.3757 to 0.3767
- Bearing ID: 0.2530 to 0.2540
- Length: 0.074 to 0.094
from Quality Bearings & Components
Self-Lubricating | Split-Type. PLAIN SLEEVE BEARINGS - INCH. Carbon Steel Backing. Self-Lubricated Liner. Maintenance-Free. NOTE: A composite liner consists of a carbon steel backing, an intermediate layer of sintered bronze, PTFE, and lead sliding lining. The bushing contains a certain quantity of... [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.1547 to 0.1554
- Design Units: Inch
- Housing Bore: 0.2186 to 0.2191
from EQYO
This bearing formulation has a very low coefficient of friction and is particularly well suited for use with soft mating surface materials such as aluminum and soft stainless steel. [See More]
- Bushing Type: Sleeve
- Extreme Environment: Extreme Environment
- Bearing Surface: Plastic
from SPIETH-Maschinenelemente GmbH & Co. KG
Spieth radial plain bearings – hydrodynamic multilobe bearings with adjustable play. Spindle bearings on modern, high-performance machines demand high precision. Hydrodynamically lubricated multilobe radial plain bearings with the Spieth principle have a clear advantage in modern mechanical... [See More]
- Bushing Type: Sleeve
- Bearing ID: 1.1811 to 5.5118
- Design Units: Metric
- Bearing OD: 2.1654 to 7.4803
from Climax Metal Products Company
Available in bronze or UHMW-PE. Bronze sleeve bearings are self-oiling and are ideal for motors, pulleys, and repair jobs, bore reducers, etc. UHMW-PE sleeve bearings are USDA/FDA approved and are excellent for wet or harsh environments or where wash-down is required. UHMW-PE sleeve bearings are for... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.2500 to 0.7500
- Design Units: Inch
- Bearing OD: 0.3125 to 1.0000
from G.L. Huyett
We offer a complete inventory of sleeves, flanges, thrust washers, cored stock and plates. [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1250 to 1.5630
- Design Units: Inch; Metric
- Bearing OD: 0.1890 to 1.8160
from Trelleborg Sealing Solutions Americas
For long-lasting, low friction performance [See More]
- Bushing Type: Sleeve
- Design Units: Metric
from CCTY Bearing
Designed to handle high torque loads. Lubrication maintenance is required. Cylindrical, flanged and thrust bushings forms are available. [See More]
- Bushing Type: Sleeve; Flanged (optional feature)
- Bearing ID: 0.3937 to 11.8110
- Design Units: Metric
- Bearing OD: 0.4724 to 12.0079
from Beemer Precision, Inc.
Total corporate quality dedication, 60 years of experience, and state of the art equipment produce bearings that are worthy of the products you have dedicated your time and efforts to produce. We strive continuously to adhere to traditional values, yet remain flexible to the demands necessary to... [See More]
- Bushing Type: Sleeve; Flanged
- Bearing Surface: Bronze - Sintered
- Design Units: Inch; Metric
- Self-lubricating: Self-Lubricating / Oil Impregnated
from Hartford Technologies, Inc.
Balls sleeves typically consist of a housing (sleeve). The ball sleeve is either molded plastic or stamped metal, plus steel balls. The function of the ball sleeve is to hold the balls in relative orientation (so they don ’t bunch up together.) With ball sleeves, the pocket design is critical... [See More]
- Bushing Type: Sleeve
- Bearing Surface: Plastic; Stamp metal, Sleeve Balls
from W.M. Berg
Bearings are highly engineered, precision-made components that enable machinery to move at extremely high speeds and carry remarkable loads with ease and efficiency. Berg offers many different options for your application. Journal. Ball. Linear. Needle. Roller. Thrust. Spherical. Oil-Less [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.0469
- Design Units: Inch
- Bearing OD: 0.1563
from SelfLube, Inc.
Made of solid aluminum bronze either with or without self-lubricating graphite SelfLube Straight Bushings come in a variety of industry standard sizes. If a standard size won't work for your application, SelfLube can easily make a custom size. Please contact us. [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.7500 to 3.0000
- Design Units: Inch
- Bearing OD: 1.1250 to 3.7500
from Boston Gear
Overview. Bost-Bronz ® is Boston Gear's all-purpose, oil-impregnated, porous bronze bearing material. It is manufactured using the powdered metal process with the purest metal powders. This process ensures the uniform distribution of pores between the bronze particles which absorb the oil by... [See More]
- Bushing Type: Sleeve
- Tensile Strength: 14000
from National Precision Bearing, Inc.
Loads - P. • Dynamic loads up to 20,000 PSI. • Static loads up to 36,000 PSI. • Compressive yield strength of 44,000 PSI. Speed - V. • Up to 1000 FPM unlubricated. • Up to 2000 FPM lubricated. Performance - PV. • PV to 50,000 PSI - FPM - continuous operation. • PV... [See More]
- Bushing Type: Sleeve
- Shaft OD: 1.9675 to 11.8110
- Design Units: Metric
- Housing Bore: 2.1654 to 12.0099
from igus® inc.
Features. Continuous temperatures possible up to +482 °F. Up to 50% better pressfit. Lubrication- and maintenance-free. High compressive strength. Very good chemical resistance. PTFE free [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1181 to 1.5748
- Design Units: Metric
- Bearing OD: 0.1772 to 1.7323
from FTL Technology
Composite bearings are manufactured from thermosetting resins reinforced with synthetic fibres. The physical and mechanical properties of this composite material make it an excellent bearing material. By varying the fabric reinforcement and the resin used, the physical and chemical properties of the... [See More]
- Bushing Type: Sleeve
- Bearing Surface: Graphite / Metal Alloy
from RBC Bearings
FIBERGLIDE ® coiled steel journal bearings are designed to meet industry standards for self-lubricating bushings. They provide all of the advantages of FIBERGLIDE ® at minimum cost. Carbon steel is normally used as a backing material, with the external surfaces plated to resist corrosion. [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.3750
- Design Units: Inch
- Housing Bore: 0.4680 to 0.4690
from Hallite Seals International Ltd.
DesignThe 533 Piston bearing is molded with 33% heat stabilized, glass reinforced Nylon 66. The design of the 533T is a t-shape cross section which allows full bearing contact while also offering the advantage of a t-groove form of retention that does not require side land near the working surface... [See More]
- Bushing Type: Sleeve
- Bearing OD: 1.6250 to 7.5000
- Design Units: Inch
- Length: 0.455 to 0.763
from Bowman International Ltd.
Carbon bearings, seals and components for very high temperature and hostile environments. [See More]
- Bushing Type: Sleeve
- Extreme Environment: Extreme Environment
- Bearing Surface: Carbon
- Operating Temperature: -58 to 1112
from Radwell International
BUSHING, STEEL BACKING, METAL/POLYMER COMPOSITE PLAIN BUSH, MAINTENANCE-FREE, ISO 3547, STEEL BACKING. FREE 2 YEAR RADWELL WARRANTY [See More]
- Bushing Type: Sleeve
from Daemar Inc.
Solid bronze or steel bushings. Suited for high load, low speed applications. Lubrication options include: solid PTFE, graphite self-lube or oil grooves. [See More]
- Bushing Type: Sleeve
from Specialty Product Technologies
Type 2 Thomson Nyliner plastic sleeve bearings are similar to Type 1 bearings, except they lack the circumferential lubrication groove. Similarly, they have a carbon steel outer sleeve which can be nickel-plated for corrosive environments. They are also available in diameters from 1/4 ” to... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.2500 to 1.1250
- Design Units: Inch
- Bearing Surface: Plastic
from TriStar Plastics Corp.
TriSteel ™ bearings are among the top-performing composite bearings – and the only to offer stainless steel substrates. Featuring a unique polymer liner that is sintered to a porous bronze interlayer, TriSteel bearings are self-lubricating and can withstand the most rigorous of working... [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.5000
- Design Units: Inch
- Housing Bore: 0.6345 to 0.6352
from DME Company
D-M-E Bronze-Plated Shoulder Bushings are precision ground and feature internal oil grooves and bronze-plating for smooth, non-galling operation. Available in-stock with nominal inside diameters ranging from 3/4" to 3", D-M-E Bronze-Plated Shoulder Bushings undergo rigorous quality assurance and... [See More]
- Bushing Type: Sleeve
- Shaft OD: 1.1255 to 3.7505
- Design Units: Inch
- Bearing ID: 0.7500 to 3.0000
from Bunting Bearings, LLC
Bunting Oil-Filled P/M Bronze Bearings. Bunting Bearings offers a complete line of stock plain bearings, flange bearings and washers made of P/M bronze. Bunting sintered bronze stock bearings have long conformed to ASTM chemical and physical properties, and are the first to include all ASTM standard... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.0787 to 3.9370
- Design Units: Metric
- Bearing OD: 0.1969 to 4.7244
from Spyraflo, Inc.
Spyraflo's patented self-clinching and self-aligning bearings have helped OEM and military engineers the world over solve some of their toughest challenges. Our proprietary self-clinching bearing technology makes permanent mounting in sheets as thin as 0.04" fast and easy. Our patented self-aligning... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1255 to 0.1260
- Design Units: Inch
- Bearing OD: 0.1260
from AST Bearings LLC
Please review the technical information on the requirements for the mating shaft. [See More]
- Bushing Type: Sleeve
- Housing Bore: 4.1339
- Shaft OD: 3.9370
- Bearing ID: 3.9370
from OILES America Corporation
Oiles Drymet LF is a self lubricating, high performance lead free bearing, available in standard metric sizes from 2-50mm bore sizes. Larger bore sizes are available on a made-to-order basis. LF utilized a layer of proprietary tetrafluorethylene (PTFE) and other resins layered over a special... [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.1168 to 0.1171
- Design Units: Metric
- Housing Bore: 0.1969 to 0.1973
from RegalRexnord
Duralon Filament Bearing - Catalogue Thinwall Series [See More]
- Bushing Type: Sleeve
- Bearing OD: 0.6257 to 0.6267
- Bearing ID: 0.5030 to 0.5040
- Length: 0.480 to 0.500
from Quality Bearings & Components
Ultraprecision. PLAIN SLEEVE BEARINGS – INCH. Features: • Economical replacement for ball bearings. •Dimensioned to be readily interchangeable with comparable ball bearings. • Porous Sintered Bronze Per MIL-B-5687 Type 1. • Oil-Impregnated. Lubrication: Vacuum-Impregnated... [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.0469
- Design Units: Inch
- Bearing ID: 0.0469
from Trelleborg Sealing Solutions Americas
Manufactured using Trelleborg ’s patented Automated Fiber Placement (AFP) technology, a robotic fabrication method for thermoset and thermoplastic composites. AFP technology creates high-quality, consistent and repeatable parts using a heating system to bond composite layers to one another. [See More]
- Bushing Type: Sleeve
- Design Units: Metric
from CCTY Bearing
Designed to handle high torque loads. Lubrication maintenance is required. Cylindrical, flanged and thrust bushings forms are available. [See More]
- Bushing Type: Sleeve; Flanged (optional feature)
- Bearing ID: 0.7874 to 5.3150
- Design Units: Metric
- Bearing OD: 0.9055 to 5.5118
from Beemer Precision, Inc.
Self-lubricating oil impregnated sintered bronze. [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1181 to 1.9685
- Design Units: Metric
- Bearing OD: 0.2362 to 2.3622
from Boston Gear
Overview. With Teflon as their major ingredient, glass-filled bearings are self-lubricating and offer a low coefficient of friction. They withstand extreme temperatures from -400 ° to +550 ° F, handle high loads at moderate speeds, and have excellent wear and corrosion resistance. In... [See More]
- Bushing Type: Sleeve; Flanged
- Tensile Strength: 1000
from National Precision Bearing, Inc.
Loads - P. • Dynamic loads up to 20,000 PSI. • Static loads up to 36,000 PSI. • Compressive yield strength of 44,000 PSI. Speed - V. • Up to 100 FPM greased. • Up to 500 FPM in oil. Performance - PV. • PV to 80,000 PSI - FPM -. continuous operation. Temperature Range. [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.5000 to 3.0000
- Design Units: Inch
- Housing Bore: 0.6345 to 3.1889
from igus® inc.
iglide ® GLW plastic bushings are low-cost and can handle average mechanical stressing. The bushings are particularly suited to applications with static loads, where they only need to move occasionally. When to use iglide ® GLW bushings?. When you need a low-cost, universal bearing for mass... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1250 to 2.2500
- Design Units: Metric
- Bearing OD: 0.1875 to 2.4375
from FTL Technology
Demand for non-ferrous bearings has been steadily rising in reciprocating and some rotating applications, replacing more traditional offerings. To obtain the optimum life from any seal, the guidance of the sealing surfaces is critical. As a result, non-metallic polyester bearing materials have been... [See More]
- Bushing Type: Sleeve
from RBC Bearings
The constant wall thickness of 1/8 in. (.125) for the CJH Series makes them dimensionally interchangeable with many bronze bushings. Carbon steel is normally used as a backing material, with the external surface plated to resist corrosion. Other materials can be supplied upon special order. Typical... [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.7500
- Design Units: Inch
- Housing Bore: 0.9995 to 1.0005
from Hallite Seals International Ltd.
The Hallite 540 bearing is a high performance thermoplastic molding material reinforced with a mineral filler to provide the mechanical properties required by Dynamic Seals.The Type 540 material is used in Dynamic Seals' precision bearing rings, both the heavy wall machined bearings used as... [See More]
- Bushing Type: Sleeve
- Bearing ID: 1.0000 to 63.0000
- Design Units: Inch
- Bearing OD: 1.2500 to 69.0000
from Bowman International Ltd.
All these bearings are made to order. Other shapes can be offered. Graphite loaded bearings can withstand very high temperatures up to 425 °C (800 °F) as well as cryogenic temperatures down to -200 °C (-400 °F) depending on the bronze material and graphite selected. This makes them... [See More]
- Bushing Type: Sleeve; Flanged
- Bearing Surface: Bronze - Sintered
- Design Units: Inch; Metric
- Self-lubricating: Self-Lubricating / Oil Impregnated
from Radwell International
PLAIN SLEEVE BUSHING, 2IN ID, 2.25IN OD, 2IN LENGTH, POWDERED METAL FINISH. FREE 2 YEAR RADWELL WARRANTY [See More]
- Bushing Type: Sleeve
from Daemar Inc.
Standard Sizes for Fiber-Lube Bearings: 1/16 inch Thin Wall Dimensions. Example of P/N: FL14F16-24-XXX (ID 0.875" x OD 1.000" x Length 1.500"). Identification: FL (Fibre Lube). ID: XX. Selected Liner: T= Tape F= Fibre. OD: XX. Length: XX (measured in 16ths). Style: XXX (CJ, FCJ, MRP). All... [See More]
- Bushing Type: Sleeve
- Housing Bore: 0.6235
- Shaft OD: 0.4975
- Bearing ID: 0.5020
from Specialty Product Technologies
Type 3 Thomson Nyliner plastic sleeve bearings are plain plastic sleeve bearings and do not come with an external steel sleeve. They also feature a circumferential lubrication groove and are available in diameters from 3/16 ” to 3. ” This type of plastic sleeve bearing requires a means... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1875 to 3.0000
- Design Units: Inch
- Bearing Surface: Plastic
from TriStar Plastics Corp.
Rulon bearings outperform metal materials, and are ideal for non-lubricated, high-load applications in punishing environments. Rulon bearings are heavy-duty, rust-resistant, long-wearing, and cost-efficient. [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.1250
- Design Units: Inch
- Housing Bore: 0.2500
from DME Company
D-M-E Bronze-Plated Straight Bushings are precision ground and feature internal oil grooves and bronze-plating for smooth, non-galling operation. Available in-stock with nominal inside diameters ranging from 3/4" to 3", D-M-E Bronze-Plated Straight Bushings undergo rigorous quality assurance and... [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.7490 to 1.4990
- Design Units: Inch
- Bearing ID: 0.7500 to 3.0000
from Bunting Bearings, LLC
Bunting Oil-Filled P/M Bronze Bearings. Bunting Bearings offers a complete line of stock plain bearings, flange bearings and washers made of P/M bronze. Bunting sintered bronze stock bearings have long conformed to ASTM chemical and physical properties, and are the first to include all ASTM standard... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1250 to 1.0000
- Design Units: Inch
- Bearing OD: 0.1875 to 1.5000
from Spyraflo, Inc.
Spyraflo's patented self-clinching and self-aligning bearings have helped OEM and military engineers the world over solve some of their toughest challenges. Our proprietary self-clinching bearing technology makes permanent mounting in sheets as thin as 0.04" fast and easy. Our patented self-aligning... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1858 to 0.1865
- Design Units: Inch
- Bearing OD: 0.3750
from AST Bearings LLC
Please review the technical information on the requirements for the mating shaft. [See More]
- Bushing Type: Sleeve
- Housing Bore: 0.3150
- Shaft OD: 0.2362
- Bearing ID: 0.2384
from OILES America Corporation
http://products.oiles.com/viewitems/drymet-st-bushings-70b--2/drymet-st-bushings-70b-?forward=1 [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.1964 to 0.1969
- Design Units: Metric
- Housing Bore: 0.2756 to 0.2762
from RegalRexnord
Rex RPT Filament Bearing - .250" Wall Series [See More]
- Bushing Type: Sleeve
- Bearing OD: 1.7520 to 1.7530
- Bearing ID: 1.2560 to 1.2570
- Length: 2.490 to 2.510
from Quality Bearings & Components
Nonmetallic. PLAIN SLEEVE BEARINGS – INCH. • Machined Ertalyte Polyester. • Self-Lubricating [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1280
- Design Units: Inch
- Bearing OD: 0.2520
from Trelleborg Sealing Solutions Americas
For medical equipment and devices [See More]
- Bushing Type: Sleeve
- Design Units: Metric
from CCTY Bearing
CCTY Bearing produces inner rings and outer rings for bearing applications. These products are made with high-quality steel and can be fitted specifically to your application. [See More]
- Bushing Type: Sleeve; Flanged (optional feature)
- Design Units: Inch; Metric
from Boston Gear
Overview. Boston Gear stocks a wide selection of plain cylindrical, flanged, and roll-end bearings in four different materials: Nylon, which offers good chemical and corrosion resistance, excellent abrasion resistance, and low surface friction for long wear without lubrication. Delrin ® and... [See More]
- Bushing Type: Sleeve
from National Precision Bearing, Inc.
Loads - P. • Dynamic loads up to 20,000 PSI. • Static loads up to 36,000 PSI. • Compressive yield strength of 44,000 PSI. Speed - V. • Up to 100 FPM greased. • Up to 500 FPM in oil. Performance - PV. • PV to 80,000 PSI - FPM -. continuous operation. Temperature Range. [See More]
- Bushing Type: Sleeve
- Shaft OD: 4.7244 to 11.8110
- Design Units: Metric
- Housing Bore: 4.9213 to 12.0099
from igus® inc.
iglide ® A350: the new iglide ® material for the food industry. In addition to high temperature resistance, the material has good wear resistance and low coefficients of friction. Maintenance-free. Lubrication free. High abrasion resistance. Low coefficients of friction. High media... [See More]
- Bushing Type: Sleeve; Flanged (optional feature)
- Bearing ID: 0.2362 to 0.7874
- Design Units: Metric
- Bearing OD: 0.3150 to 0.9055
from FTL Technology
PTFE bearings are uniquely suited to applications where low friction and dry running are critically important. PTFE bearings have the added benefit of having a wide operational temperature range (-260 ⁰C to +260 ⁰C). PTFE bearings are also commonly used in a wide variety of lubricated... [See More]
- Bushing Type: Sleeve
- Operating Temperature: -436 to 500
from RBC Bearings
The FIBERGLIDE ® Liner Type bearing provides high load capacity and low friction in the form of a thin-walled sleeve for use in butterfly valves, trunnion bearings, ball and plug valve stem bushings, hydraulic and pneumatic cylinder guide bushings, food handling machinery, and door hinge... [See More]
- Bushing Type: Sleeve
- Shaft OD: 1.0000
- Design Units: Inch
- Housing Bore: 1.0610 to 1.0620
from Hallite Seals International Ltd.
Hallite 506 bearing strip is available in three forms: cut rings, spiral lengths and flat coils. Hallite 506 provides an extremely effective, hard wearing and easy to use bearing material.Manufactured to very tight tolerances and providing bearing solutions for reciprocating, oscillating and slow... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.5000 to 17.7500
- Design Units: Inch; Metric
- Bearing OD: 0.6250 to 18.0000
from Bowman International Ltd.
Heavy duty wrapped bearings in Toughmet ® spinodal bronze. The bearings can be plain or flanged, and if required lubrication grooves and holes as well as pockets can be provided. Location slots or tabs can also be incorporated. Half shells, thrust washers and wear strips are also available. Due... [See More]
- Bushing Type: Sleeve; Flanged
- Shaft OD: 0.1969 to 11.8110
- Design Units: Inch; Metric
- Bearing ID: 0.1969 to 11.8110
from Radwell International
PLAIN BEARING, SPHERICAL, RADIAL, 0.75 IN BORE, 1.25 IN OUTSIDE DIAMETER, 6 DEGREE MISALIGNMENT ANGLE, 0.6560 IN INNER RING WIDTH, 0.5620 IN OUTER RING WIDTH,0.6560 IN OVERALL WIDTH, OPEN, CHROME STEEL, 20907 LBF STATIC LOAD, 7081 LBF DYNAMIC LOAD. FREE 2 YEAR RADWELL WARRANTY [See More]
- Bushing Type: Sleeve
from Daemar Inc.
TH Flanged Bearings. Length = 0.25 to 2.00 in. Shaft Diameter = 0.3731 to 1.7487 in. The Dryslide trademark identifies a whole range of self-lubricated dry sliding bearings. A composite structure, FTH consists of a carbon steel backing, an intermediate layer of sintered bronze, PTFE based sliding... [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.3731
- Design Units: Inch
- Housing Bore: 0.4684
from Specialty Product Technologies
Type 4 Thomson Nyliner plastic sleeve bearings lack the external carbon steel sleeve and lubrication groove. They are available in diameters from 3/16 ” to 3". [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1875 to 3.0000
- Design Units: Inch
- Bearing Surface: Plastic
from TriStar Plastics Corp.
Bearing grade polyester/graphite composite. High-load, high-impact and slow-speed applications. Vibration and abrasion resistant. Self-lubricating with low-moisture absorption. Runs best on shafts with RC30 or higher. [See More]
- Bushing Type: Sleeve
- Bearing Surface: Graphite / Metal Alloy; Plastic
- Design Units: Inch
- Self-lubricating: Self-Lubricating / Oil Impregnated
from DME Company
D-M-E Self-Lubricating Bushings for Guide Pins can save time and money in the design, construction and operation of injection molds. Their built-in lubrication makes them ideal for any application where the parts being molded prohibit the use of external lubricants, such as medical, electronic and... [See More]
- Bushing Type: Sleeve
- Shaft OD: 1.1255 to 3.7505
- Design Units: Inch
- Bearing ID: 0.7500 to 3.0000
from Bunting Bearings, LLC
Bunting “BU ” Dry Lubricant Bearings. Bunting ’s “BU ” product is a composite material, consisting of bonded layers of a steel backing and a porous bronze matrix, impregnated and overlaid with PTFE bearing material. The steel backing provides mechanical strength and the... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1250 to 2.0000
- Design Units: Inch
- Bearing OD: 0.1875 to 2.1875
from AST Bearings LLC
Please review the technical information on the requirements for the mating shaft. [See More]
- Bushing Type: Sleeve
- Length: 19.685
- Bearing OD: 5.9055
- Bearing Surface: Plastic (Lined Bearing Surface)
from OILES America Corporation
Fiberflon is a unique self lubricating non-metallic PTFE filament wound bearing. The rigid body is comprised of high strength epoxy resin bound filament wound glass fibers. The wearing surface is a proprietary blend of PTFE resins and woven yarn fibers. Together they provide a superior low friction... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.7917 to 0.7938
- Design Units: Metric
- Bearing OD: 0.9871 to 1.1039
from RegalRexnord
5/8" Self Lubricating Carbon Graphite Replacement Insert for Series 3200 Flex-Block Sleeve Bearing [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.6250
- Design Units: Inch
- Bearing Surface: Graphite / Metal Alloy
from Quality Bearings & Components
Nonmetallic. PLAIN SLEEVE BEARINGS – INCH. • Machined PTFE [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.1250
- Design Units: Inch
- Bearing ID: 0.1260
from Trelleborg Sealing Solutions Americas
Orkot ® bearings offer significant advantages over traditional metal bearings. All are dimensionally stable, have excellent wear resistance and outstanding low friction characteristics, giving them unrivalled performance in dry running conditions or with boundary lubrication. With virtually no... [See More]
- Bushing Type: Sleeve
- Bearing OD: 0.0787 to 118.1103
- Design Units: Metric
- Operating Temperature: -76 to 482
from CCTY Bearing
Feature a hardened steel backing with an inner lining of PTFE or POM. Cylindrical, flanged and thrust bushings forms are available. [See More]
- Bushing Type: Sleeve; Flanged (optional feature)
- Bearing ID: 0.1250 to 4.0000
- Design Units: Inch; Metric
- Bearing OD: 0.1875 to 4.1875
from igus® inc.
iglide ® JVSM and JVSI bearings are free from clearance in their unloaded state, because of the pre-tension at the ends. The material iglide ® J is designed for the lowest coefficient of friction while running dry with its low stick-slip tendency. Features. Pre-loaded bearing. Clearance-free... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.3750 to 1.0000
- Design Units: Inch
- Bearing OD: 0.5000 to 1.1250
from RBC Bearings
This RBC Inner Ring can be used separately or as an inner race with complimentary SJ or TJ roller bearings. [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.3744 to 0.3755
- Design Units: Inch
- Housing Bore: 0.6241 to 0.6245
from Bowman International Ltd.
We can supply bearings to the following tolerances: G7 s7, G8 s8, F7 s7 / F8 s8, G7 r6 and E7 r7. Available Sizes: Metric Plain bearings to ISO 2795. French metric Plain bearings (F7/F8-s7/s8 tolerances). DIN metric Plain bearings to DIN 1850 (G7/r6 tolerances). Scandanavian metric Plain bearings. [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.0787 to 2.4803
- Design Units: Inch; Metric
- Bearing ID: 0.0787 to 2.4803
from Radwell International
BUSHING METRIC OILESS 20X23X25MM PLAIN CYLINDRICAL. FREE 2 YEAR RADWELL WARRANTY [See More]
- Bushing Type: Sleeve
- Design Units: Metric
from Daemar Inc.
Sintered self-lubricated metal bushings reduce costs by allowing longer operating times between maintenance. Formed in various metals including: bronze, iron and other alloys and metals. [See More]
- Bushing Type: Sleeve
- Bearing OD: 1.0025
- Bearing ID: 0.7505
- Length: 1.250
from DME Company
D-M-E Self-Lubricating Guided Ejection Bushings are ideal for clean-room conditions or applications where the parts being molded prohibit the use of external lubricants. It is recommended that a minimum of four bushings be installed. The size of the bushings should be determined by the size of the... [See More]
- Bushing Type: Sleeve
- Shaft OD: 1.1255 to 3.7505
- Design Units: Inch
- Bearing ID: 0.7500 to 3.0000
from Bunting Bearings, LLC
Bunting “BU ” Dry Lubricant Bearings. Bunting ’s “BU ” product is a composite material, consisting of bonded layers of a steel backing and a porous bronze matrix, impregnated and overlaid with PTFE bearing material. The steel backing provides mechanical strength and the... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1181 to 1.9685
- Design Units: Metric
- Bearing OD: 0.1772 to 2.1654
from AST Bearings LLC
Please review the technical information on the requirements for the mating shaft. [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.3750
- Design Units: Inch
- Housing Bore: 0.4694
from OILES America Corporation
Oiles 2000 is a patented and proprietary specialty bearing product. Comprised of a machined steel body with a special low friction integral liner, 2000 handles loads and speeds not normally associated with lube free bearings. 2000 bearings are available from stock in specific metric sized bearings... [See More]
- Bushing Type: Sleeve
- Shaft OD: 3.9370
- Design Units: Metric
- Housing Bore: 4.7244
from RegalRexnord
4 7/16" Mounted Babbitt Sleeve Bearing, Cast Iron Protected Screw Take-up Block [See More]
- Bushing Type: Sleeve
from Quality Bearings & Components
Frelon ® Lined. SLEEVE BEARINGS-PLAIN - INCH. Self-Aligning. Frelon ® Liner. Replaces Sintered and Plastic Bearings [See More]
- Bushing Type: Sleeve
- Housing Bore: 1.2490 to 1.2530
- Design Units: Inch
- Bearing ID: 1.0015 to 1.0025
from Trelleborg Sealing Solutions Americas
Orkot ® Marine Bearings, manufactured and developed by Trelleborg, are the world ’s leading composite bearings for the shipping and marine industries. [See More]
- Bushing Type: Sleeve
- Design Units: Metric
from CCTY Bearing
Feature a hardened steel backing with an inner lining of PTFE or POM. Cylindrical, flanged and thrust bushings forms are available. [See More]
- Bushing Type: Sleeve; Flanged (optional feature)
- Bearing ID: 0.1250 to 4.0000
- Design Units: Inch; Metric
- Bearing OD: 0.1875 to 4.1875
from igus® inc.
iglide ® A200 plastic bushings adhere to FDA guidelines and are suitable for low to medium loads in contact with food or pharmaceuticals. When to use iglide ® A200 bushings?. In direct contact with food or pharmaceuticals. For low speeds. When quiet operation is important. When dirt may... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1250 to 1.5000
- Design Units: Inch
- Bearing OD: 0.2500 to 1.8000
from RBC Bearings
This RBC Radial Outer Ring is from the standard inch bearing of the same size. It can be used wherever the user provides the inner ring or ball stud. [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.7186 to 0.7194
- Design Units: Inch
- Housing Bore: 0.8734 to 0.8747
from Bowman International Ltd.
Material. Thermoplastic with Fibres and solid lubricants (PA66 + GF + PTFE). Suitable for food industry machinery. All testing carried out at 20 °C. All dimensions and clearances are based on steel housings being used, Small allowances must be made for softer housing materials such as Aluminium [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.0394 to 1.5748
- Design Units: Metric
- Bearing ID: 0.0394 to 1.5748
from Radwell International
STRAIGHT LINEAR PLAIN BEARING, MULTI LAYERED, STEEL BACKED BRONZE SINTER, POLYACETAL LAYER, DRYMENT ST. FREE 2 YEAR RADWELL WARRANTY [See More]
- Bushing Type: Sleeve
- Bearing Surface: Bronze - Sintered
from Daemar Inc.
DMR Sleeves are precision stainless steel wear sleeves designed to prolong the life of damaged shafts and yokes by providing a new sealing surface that is superior to most original finishes and materials. Over time sealing lips can groove shafts due to factors such as dirt, heat, excessive water,... [See More]
- Bushing Type: Sleeve
- Length: 0.437
- Shaft OD: 0.6220 to 0.6300
from DME Company
DME Standard Solid Bronze Guided Ejection Bushings feature high-strength bronze and natural lubricity. Internal oil grooves and a lubrication hole help to ensure smoother mold operation. It is recommended that a minimum of four bushings be installed. The size of the bushings should be determined by... [See More]
- Bushing Type: Sleeve
- Shaft OD: 1.1255 to 3.7505
- Design Units: Inch
- Bearing ID: 0.7500 to 3.0000
from Bunting Bearings, LLC
Bunting cast bronze bearings are machined from continuous cast C93200 (SAE 660) bronze for superior quality and performance. The continuous casting process assures a uniform bronze structure throughout the bearing, free from porosity and hard particle inclusions commonly found in other cast... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1875 to 5.0000
- Design Units: Inch
- Bearing OD: 0.3125 to 6.0000
from AST Bearings LLC
Please review the technical information on the requirements for the mating shaft. [See More]
- Bushing Type: Sleeve
- Bearing OD: 5.9055
- Design Units: Metric
- Length: 19.685
from OILES America Corporation
Oiles 300 series bearings offer an excellent alternative to oil impregnated and non metallic bearing materials. Designed to reduce lubrication intervals and provide a worry free, seize free bearing alternative. Available in finished metric straight bore and flanged sizes, bar stock and tube stock. [See More]
- Bushing Type: Sleeve
- Shaft OD: 3.9370
- Design Units: Metric
- Housing Bore: 4.7244 to 4.7258
from RegalRexnord
2 7/16" Mounted Babbitt Sleeve Bearing, Cast Iron Protected Screw Take-up Block [See More]
- Bushing Type: Sleeve
from Trelleborg Sealing Solutions Americas
A non-asbestos synthetic composite material incorporating solid lubricants. Orkot ® Marine Bearings have exceptional wear resistance, and virtually no swell in water. Their elasticity, compared to metal bearings, permits edge loading and misalignment, under the heaviest loads. They provide... [See More]
- Bushing Type: Sleeve
- Bearing OD: 0.0787 to 118.1103
- Design Units: Metric
- Operating Temperature: -76 to 482
from CCTY Bearing
Feature a hardened steel backing with an inner lining of PTFE or POM. Cylindrical, flanged and thrust bushings forms are available. [See More]
- Bushing Type: Sleeve; Flanged (optional feature)
- Bearing ID: 0.3750 to 4.0000
- Design Units: Inch; Metric
- Bearing OD: 0.4688 to 4.3750
from igus® inc.
iglide ® G300 plastic bushings are suitable for the widest range of different applications. That's why we call this high-performance, oil-free material “The Universal All-Rounder ”. iglide ® G300 is suitable for those applications involving medium to high loads, average surface... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1250 to 3.0000
- Design Units: Inch
- Bearing OD: 0.1875 to 3.1875
from RBC Bearings
Spherical Plain Bearing [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.7480
- Design Units: Metric
- Housing Bore: 0.8661
from Bowman International Ltd.
Offered with lubrication pockets, grooves or thru holes. Used for heavy load applications. [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.3937 to 9.0551
- Design Units: Metric
- Bearing ID: 0.3937 to 9.0551
from Radwell International
PBC SIMPLICITY SERIES CLOSED PLAIN BEARING, PTFE, 3/8IN INSIDE DIAMETER, 5/8IN OUTSIDE DIAMETER, 7/8IN OVERALL LENGTH, 0.0005IN RUNNING CLEARANCE. FOR USE WITH 3/8IN DIAMETER PBC SHAFTS.. FREE 2 YEAR RADWELL WARRANTY [See More]
- Bushing Type: Sleeve
from Daemar Inc.
Length = 0.125 to 32.000 in. Shaft Diameter = 0.1236 to 6.9954 in. The TH Dryslide bushing is a self-lubricated dry sliding bearings. A composite structure, TH cylindrical bushing consists of a Zinc/Tin low carbon steel backing, an intermediate layer of sintered bronze, PTFE based sliding lining. [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.1547
- Design Units: Inch
- Housing Bore: 0.2186
from DME Company
Solid Bronze Straight Bushing [See More]
- Bushing Type: Sleeve
- Shaft OD: 1.1255 to 3.7505
- Design Units: Inch
- Bearing ID: 0.7500 to 3.0000
from Bunting Bearings, LLC
Bunting cast bronze bearings are machined from continuous cast C93200 (SAE 660) bronze for superior quality and performance. The continuous casting process assures a uniform bronze structure throughout the bearing, free from porosity and hard particle inclusions commonly found in other cast... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.2362 to 3.9370
- Design Units: Metric
- Bearing OD: 0.3150 to 4.7244
from AST Bearings LLC
Additional material options are available in this series. [See More]
- Bushing Type: Sleeve
- Housing Bore: 4.7244
- Shaft OD: 3.9370
- Bearing ID: 3.9370
from OILES America Corporation
Oiles 500 series bearings incorporate high quality copper alloy based metals with engineered solid lubricant plugs. These bearings are designed to accommodate a wide variety of application requirements demanded by today's equipment. Precise tolerances utilizing strategic plug location and plug... [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.3150
- Design Units: Metric
- Bearing ID: 0.3155 to 0.3161
from RegalRexnord
3 15/16" Mounted Babbitt Sleeve Bearing, Top Angle Protected Screw Take-up Assembly [See More]
- Bushing Type: Sleeve
- Shaft OD: 3.9375
- Design Units: Inch
- Operating Temperature: 130
from Trelleborg Sealing Solutions Americas
High load bearings made from Turcite ® and HiMod ® engineered thermoplastics or Orkot ® synthetic composites. The bearings are dimensionally stable, wear resistant and provide excellent performance under dry and boundary lubrication conditions. [See More]
- Bushing Type: Sleeve
- Bearing OD: 0.0787 to 118.1103
- Design Units: Metric
- Operating Temperature: -76 to 482
from igus® inc.
iglide ® J plastic bushings combine high wear resistance at low to medium loads and excellent coefficients of friction. They boast extreme dimensional stability, even in moisture-exposed applications. When to use iglide ® J bushings?. When very low coefficients of friction are needed. When a... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1250 to 1.7500
- Design Units: Inch
- Bearing OD: 0.2500 to 2.0000
from Bowman International Ltd.
Suitable for dry running, low coefficient of friction, lower wear, good sliding characteristics, forming a transfer film can protect the mating metal surface, suitable for rotary and oscillating movement. High chemical resistance, low absorption of water and swelling. Typical Applications. Developed... [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.1875 to 7.0000
- Design Units: Inch
- Bearing ID: 0.1875 to 7.0000
from Radwell International
20MM BORE DIAM, 6,750 LB DYNAMIC CAPACITY, SPHERICAL PLAIN BEARING 32,850 LB STATIC LOAD CAPACITY. FREE 2 YEAR RADWELL WARRANTY [See More]
- Bushing Type: Sleeve
- Design Units: Metric
from Daemar Inc.
Length = 0.375 to 3.000 in. Shaft Diameter = 0.499 to 3.000 in. The THX trademark denotes a range of sliding cylindrical bushings produced from a material with a composite structure. The backing consists of carbon steel onto which a porous layer of bronze is sintered and then impregnated with a... [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.4990
- Design Units: Inch
- Housing Bore: 0.6345
from DME Company
D-M-E Straight Bushings are hardened and precision ground. Available in-stock with nominal inside diameters ranging from 3/4" to 3", D-M-E Straight Bushings feature a case-hardened surface treatment that's .030 to .040 deep. All Straight Bushings undergo rigorous quality assurance and control... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.7500 to 3.0000
- Design Units: Inch
- Bearing OD: 1.1250 to 3.7500
from Bunting Bearings, LLC
Bunting TMCB bearings are machined from cast C96900 ToughMet3 bronze for superior quality and performance. The casting process assures a uniform bronze structure throughout the bearing, free from porosity and hard particle inclusions commonly found in other processes. Our standard ToughMet bearing... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1900 to 4.0000
- Design Units: Inch
- Bearing OD: 0.3100 to 4.5000
from AST Bearings LLC
Recommended fitting tolerance: Housing = H7, Shaft = h9, [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1202
- Shaft OD: 0.1181
- Bearing OD: 0.1772
from OILES America Corporation
Oiles 500 series bearings incorporate high quality copper alloy based metals with engineered solid lubricant plugs. These bearings are designed to accommodate a wide variety of application requirements demanded by today's equipment. Precise tolerances utilizing strategic plug location and plug... [See More]
- Bushing Type: Sleeve
- Shaft OD: 3.9370
- Design Units: Metric
- Bearing ID: 3.9398 to 3.9412
from RegalRexnord
Product Family: Composite Bearing; Line: Rex [See More]
- Bushing Type: Sleeve
- Bearing OD: 2.0020 to 2.0030
- Bearing ID: 1.5060 to 1.5070
- Length: 3.990 to 4.010
from Trelleborg Sealing Solutions Americas
Trelleborg Sealing Solutions offers composite bearings and thermoplastic bearings for a wide range of applications. Bearings are fitted within an application to allow constrained relative motion between two or more parts. They are mechanical devices that … support another part and/or reduce... [See More]
- Bushing Type: Sleeve
- Design Units: Metric
from igus® inc.
iglide ® L280 is an extremely wear resistant plastic bushing material which offers an excellent service life in many applications. It ’s ideal for use with rough shafts or in abrasive environments. When to use iglide ® L280 bushings?. When you need a long service life. When you require... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1250 to 2.2500
- Design Units: Inch
- Bearing OD: 0.1875 to 2.4375
from Bowman International Ltd.
Oil or grease lubricated bearings. Carbon Steel shell with sintered bronze lining. Various metric and imperial sizes available from stock. [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.3750 to 3.0000
- Design Units: Inch
- Bearing ID: 0.3750 to 3.0000
from Radwell International
SPHERICAL PLAIN BUSHING, UNSEALED, CLOSURE TYPE: OPEN, .75 INCH BORE DIAMETER, INNER RING: CHROME STEEL, RADIAL DYNAMIC LOAD: 5300 LBF, RADIAL STATIC LOAD: 21200 LBF. FREE 2 YEAR RADWELL WARRANTY [See More]
- Bushing Type: Sleeve
from Bunting Bearings, LLC
Bunting Nylon Bearings. NYLON -Molded Nylon 101 sleeve (plain), flange, and thrust bearings provide an economical alternative where performance characteristics and the strength of metal bearings are not required. Bunting Bearings carries a full line of sleeve (plain), flange, and thrust styles to... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1875 to 1.0000
- Design Units: Inch
- Bearing OD: 0.3125 to 1.2500
from AST Bearings LLC
Please review the technical information on the requirements for the mating shaft. [See More]
- Bushing Type: Sleeve
- Housing Bore: 4.1339
- Shaft OD: 3.9370
- Bearing ID: 3.9370
from OILES America Corporation
Oiles #80 is a proprietary blend of polyacetal resins and uniformly dispersed bearing lubricants. There are several derivatives of this material, each specifically formulated to satisfy a wide variety of application requirements. Oiles #80 is available in both flanged straight bore bushing and... [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.0783 to 0.0787
- Design Units: Metric
- Housing Bore: 0.1575 to 0.1580
from Trelleborg Sealing Solutions Americas
Turcite ® -B Slydway ® is a low friction linear bearing strip C for use primarily on the ways and gibs of machine tools. It provides low friction, stick-slip-free operation, long life and minimum wear. It is installed using a two-part epoxy resin after cleaning and degreasing the bare... [See More]
- Bushing Type: Sleeve
- Operating Temperature: 500
- Design Units: Metric
from igus® inc.
iglide ® M250 plastic bushings are vibration dampening, rugged and wear resistant. In applications with low speeds, they balance edge loads extremely well and help to minimize noise. When to use iglide ® M250 bushings?. When there will be exposure to high amounts of dirt. When vibration... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1250 to 3.0000
- Design Units: Inch
- Bearing OD: 0.1875 to 3.2500
from Bowman International Ltd.
Bearings can be manufactured plain, flanged, split shell type or in thrust washer form. Lubrication holes and grooves in various configurations can be provided. The bores of the bearings can be supplied to finished sizes or with a machining allowance to accommodate line boring after assembly. Plated... [See More]
- Bushing Type: Sleeve; Flanged
- Bearing Surface: Various lining material specifications can be supplied both with and without lead.
- Design Units: Inch; Metric
- Tensile Strength: 14504 to 21756
from Radwell International
LINEAR PLAIN BEARING PILLOW BLOCK, CLOSED BLOCK, ISO METRIC, 20 MM SHAFT, 50 MM BEARING, SELF LUBRICATING, VIBRATION DAMPING. FREE 2 YEAR RADWELL WARRANTY [See More]
- Bushing Type: Sleeve
- Design Units: Metric
from Bunting Bearings, LLC
BJ Liner bearings reduce material cost while being incredibly versatile. Their improved load capacity is achieved by capturing a minimum thickness of BJ tape inside a steel shell. (JLON 4200 Tape Liner). Temperature range: -400 °F/+550 °F [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.2500 to 1.2500
- Design Units: Inch
- Bearing OD: 0.3400 to 1.3750
from OILES America Corporation
Oiles Toughmet is a bearing material designed to accommodate high temperature, high load applications. Consisting of two layers; a proprietary sintered copper alloy and a steel back. The sintered copper alloy layer contains uniformly dispersed solid lubricants. [See More]
- Bushing Type: Sleeve
- Shaft OD: 0.1964 to 0.1969
- Design Units: Metric
- Housing Bore: 0.2756 to 0.2815
from Trelleborg Sealing Solutions Americas
High load bearings made from Turcite ® are dimensionally stable, wear resistant and provide excellent performance under dry and boundary lubrication conditions. [See More]
- Bushing Type: Sleeve
- Bearing OD: 0.0787 to 118.1103
- Design Units: Metric
- Operating Temperature: -76 to 392
from igus® inc.
iglide ® P plastic bushings offer low moisture absorption and are recommended for rotational applications and medium to high loads. When to use iglide ® P bushings?. When very low water absorption is needed. When a cost-effective bushing for high pressure loads is required. For rotational... [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.2500 to 2.0000
- Design Units: Inch
- Bearing OD: 0.3125 to 2.3750
from Radwell International
BUSHING PLAIN SLEEVE SYNTHETIC MATERIAL. FREE 2 YEAR RADWELL WARRANTY [See More]
- Bushing Type: Sleeve
from Bunting Bearings, LLC
BJ2 bearings provide high levels of strength, rigidity, toughness, wear resistance and chemical resistance. They are engineered to satisfy a wide range of service requirements. (JLON 2100). Temperature range: -250 °F/+550 °F [See More]
- Bushing Type: Sleeve
- Bearing ID: 0.1250 to 3.0000
- Design Units: Inch
- Bearing OD: 0.2500 to 3.2500