Mobile / Wireless Systems RF Amplifiers
from Qorvo
The QPL9547 is a high-linearity, ultra-low noise amplifier in a small 2.0 x 2.0 mm surface-mount package. At 1.9 GHz, the amplifier typically provides 19.5 dB gain, +39 dBm OIP3 at a 65 mA bias setting, and 0.3 dB noise figure. The LNA can be biased from a single positive supply ranging from 3.3 to... [See More]
- Applications: Mobile / Wireless Systems
- RoHS Compliant: RoHS
- Amplifier Type: Low Noise Amplifier
- Frequency Range: 100 to 6000
from A.H. Systems Inc.
Features. Includes a 1 watt limiter for added protection. Frequency Range of 20 MHz to 18 GHz. Low Noise, High Gain. Individually Calibrated (gain calibration included). A.H. Systems' Preamplifier line is an excellent choice with a rugged design, no hassles with soldering your own power leads and... [See More]
- Applications: Mobile / Wireless Systems; EMC/EMI Testing
- Frequency Range: 20 to 18000
- Amplifier Type: Low Noise Amplifier; Broadband Preamplifier
- Minimum Gain: 37
from DigiKey
RF Amplifier IC Bluetooth, WLAN 2.3GHz ~ 2.5GHz SOT-23-6 [See More]
- Applications: Mobile / Wireless Systems; Bluetooth, WLAN
- Frequency Range: 2300 to 2500
- Amplifier Type: Low Noise Amplifier; Power Amplifier
- Minimum Gain: 19
from Infineon Technologies AG
Silicon Germanium Low Noise Amplifier for LTE. Summary of Features: - Insertion power gain: 13.3 dB. - Low noise figure: 0.90 dB. - Low current consumption: 4.4 mA. - Operating frequencies: 728 - 960 MHz. - Supply voltage: 1.5 V to 3.3 V. - Digital on/off switch (1V logic high level). - Ultra small... [See More]
- Applications: Mobile / Wireless Systems
- RoHS Compliant: RoHS
- Amplifier Type: Low Noise Amplifier
- Frequency Range: 728 to 960
from Skyworks Solutions, Inc.
Please note: SKY67110-396LF is being discontinued and is not recommended for new designs. The suggested replacement is SKY67150-396LF. The SKY67110-396LF is high linearity GaAs, pHEMT Low-Noise Amplifier (LNA) with an active bias and on-die stability structures enabling simple external matching The... [See More]
- Applications: Mobile / Wireless Systems
- Frequency Range: 300 to 700
- Amplifier Type: Low Noise Amplifier
- Minimum Gain: 21
from Qorvo
Qorvo's QPL9065 is a high-linearity, ultra-low noise 2-stage gain block amplifier module with a bypass mode functionality integrated to the second stage in the product. At 1.95 GHz, the amplifier, under high gain mode, typically provides 37.5 dB gain, +35 dBm OIP3, and 0.5 dB noise figure while... [See More]
- Applications: Mobile / Wireless Systems
- RoHS Compliant: RoHS
- Amplifier Type: Low Noise Amplifier
- Frequency Range: 450 to 3800
from A.H. Systems Inc.
A.H. Systems' Preamplifier line is an excellent choice with a rugged design, no hassles with soldering your own power leads and they improve overall system sensitivity by at least 20 dB. All of A.H. Systems' Preamplifiers come with a 15-volt DC regulated power source. A low voltage indicator... [See More]
- Applications: Mobile / Wireless Systems; EMC/EMI Testing
- Frequency Range: 1000 to 26500
- Amplifier Type: Low Noise Amplifier; Broadband Preamplifier
- Minimum Gain: 29
from DigiKey
RF Amplifier IC Bluetooth, WLAN 2.3GHz ~ 2.5GHz 8-MSOP [See More]
- Applications: Mobile / Wireless Systems; Bluetooth, WLAN
- Frequency Range: 2300 to 2500
- Amplifier Type: Low Noise Amplifier; Power Amplifier
- Minimum Gain: 21
from Infineon Technologies AG
Low noise amplifier MMICs for mobile cellular systems: UMTS, HSPA/+ and LTE. Infineon 3G/4G LNA MMICs (Monolithic Microwave Integrated Circuit) are designed to optimize the sensitivity of mobile cellular systems. This allows to extend the area of highest data traffic for UMTS, HSPA, HSPA + and LTE... [See More]
- Applications: Mobile / Wireless Systems
- RoHS Compliant: RoHS
- Amplifier Type: Low Noise Amplifier
- Frequency Range: 2300 to 2690
from Skyworks Solutions, Inc.
Please note: RFX8422S is being discontinued and is not recommended for new designs. The RFX8422S is a fully integrated, single-chip, single-die RF front-end integrated circuit (RFeIC ®) that incorporates all the RF functionality needed for dual-mode WLAN and Bluetooth ® signal functions... [See More]
- Applications: Mobile / Wireless Systems
- Package Type: Surface Mount; QFN, 16L
- Frequency Range: 2400 to 2500
from Qorvo
The QPL9058 is a high-linearity, ultra-low noise amplifier in a small 2.0 x 2.0 mm surface-mount package. At 3.6 GHz, the amplifier typically provides 18 dB gain, +36 dBm OIP3 at a 55 mA bias setting, and 0.6 dB noise figure. The LNA can be biased from a single positive supply ranging from 3.3 to 5... [See More]
- Applications: Mobile / Wireless Systems
- RoHS Compliant: RoHS
- Amplifier Type: Low Noise Amplifier
- Frequency Range: 500 to 6000
from A.H. Systems Inc.
A.H. Systems' Preamplifier line is an excellent choice with a rugged design, no hassles with soldering your own power leads and they improve overall system sensitivity by at least 20 dB. All of A.H. Systems' Preamplifiers come with a 12-volt DC regulated power source. A low voltage indicator... [See More]
- Applications: Mobile / Wireless Systems; EMC/EMI Testing
- Frequency Range: 20 to 2000
- Amplifier Type: Low Noise Amplifier; Broadband Preamplifier
- Minimum Gain: 29.5
from DigiKey
RF Amplifier IC HiperLAN, UNII 5GHz ~ 6GHz 8-MSOP-EP [See More]
- Applications: Mobile / Wireless Systems; HiperLAN, UNII
- Frequency Range: 5000 to 6000
- Amplifier Type: Low Noise Amplifier; Power Amplifier
- Minimum Gain: 9
from Infineon Technologies AG
Low noise amplifier MMICs for mobile cellular systems: UMTS, HSPA/+ and LTE. Infineon 3G/4G LNA MMICs (Monolithic Microwave Integrated Circuit) are designed to optimize the sensitivity of mobile cellular systems. This allows to extend the area of highest data traffic for UMTS, HSPA, HSPA + and LTE... [See More]
- Applications: Mobile / Wireless Systems
- RoHS Compliant: RoHS
- Amplifier Type: Low Noise Amplifier
- Frequency Range: 3300 to 3800
from Skyworks Solutions, Inc.
The SE2613T is a complete 802.11 b/g/n WLAN RF front-end module with a port suitable for Bluetooth ® signals. The device provides all the functionality of the power amplifier, power detector, harmonic filtering, switch, low noise amplifier (LNA), and associated matching. The SE2613T provides a... [See More]
- Applications: Mobile / Wireless Systems
- Package Type: Surface Mount; Plugin; QFN, 16-pin
- Frequency Range: 2400 to 2500
from Qorvo
The QPL9057 is a flat-gain, high-linearity, ultra-low noise amplifier in a small 2 x 2 mm surface-mount package. The LNA provides a gain flatness of 2.4 dB (peak-to-peak) over a wide bandwidth from 1.5 to 3.8GHz. At 3.5 GHz, the amplifier typically provides 22.8 dB gain, +32 dBm OIP3 at a 50 mA bias... [See More]
- Applications: Mobile / Wireless Systems
- RoHS Compliant: RoHS
- Amplifier Type: Low Noise Amplifier
- Frequency Range: 600 to 4200
from A.H. Systems Inc.
A.H. Systems' Preamplifier line is an excellent choice with a rugged design, no hassles with soldering your own power leads and they improve overall system sensitivity by at least 20 dB. All of A.H. Systems' Preamplifiers come with a 12-volt DC regulated power source. A low voltage indicator... [See More]
- Applications: Mobile / Wireless Systems; EMC/EMI Testing
- Frequency Range: 20 to 4000
- Amplifier Type: Low Noise Amplifier; Broadband Preamplifier
- Minimum Gain: 22
from DigiKey
RF Amplifier IC CDMA, GSM 350MHz ~ 550MHz 16-QFN (3x3) [See More]
- Applications: Mobile / Wireless Systems; CDMA, GSM
- Frequency Range: 350 to 550
- Amplifier Type: Low Noise Amplifier; Power Amplifier
- Minimum Gain: 17
from Infineon Technologies AG
Low noise amplifier MMICs for mobile cellular systems: UMTS, HSPA/+ and LTE. Infineon 3G/4G LNA MMICs (Monolithic Microwave Integrated Circuit) are designed to optimize the sensitivity of mobile cellular systems. This allows to extend the area of highest data traffic for UMTS, HSPA, HSPA + and LTE... [See More]
- Applications: Mobile / Wireless Systems
- RoHS Compliant: RoHS
- Amplifier Type: Low Noise Amplifier
- Frequency Range: 5150 to 5925
from Skyworks Solutions, Inc.
The SKY85330-21 is a complete 802.11b/g/n/ac/ax 1024 QAM WLAN RF front-end module (FEM. The device provides all the functionality of a fully matched power amplifier (PA), power detector, low-noise amplifier (LNA), and single-pole, double-throw (SPDT) switch. The SKY85330-21 provides a complete 2.4... [See More]
- Applications: Mobile / Wireless Systems
- Package Type: Surface Mount; Plugin; QFN, 16-pin
- Frequency Range: 2400 to 2500
from Qorvo
The QPA0163L is a high performance SiGe HBT MMIC amplifier. An internal temperature compensation circuit allows operation from a supply voltage as low as +2.5V. The QPA0163L has been characterized at VS=+3V for low power and VS=+4 V for medium power applications. Two DC-blocking capacitors, bypass... [See More]
- Applications: Mobile / Wireless Systems; SATCOM
- Frequency Range: 100 to 1300
- RoHS Compliant: RoHS
- Noise Figure: 1.5
from A.H. Systems Inc.
A.H. Systems' Preamplifier line is an excellent choice with a rugged design, no hassles with soldering your own power leads and they improve overall system sensitivity by at least 20 dB. All of A.H. Systems' Preamplifiers come with a 15-volt DC regulated power source. A low voltage indicator... [See More]
- Applications: Mobile / Wireless Systems; EMC/EMI Testing
- Frequency Range: 18000 to 26500
- Amplifier Type: Low Noise Amplifier; Broadband Preamplifier
- Minimum Gain: 29
from DigiKey
RF Amplifier IC CDMA, GSM, EDGE, W-CDMA 700MHz ~ 1GHz 16-LFCSP (3x3) [See More]
- Applications: Mobile / Wireless Systems; CDMA, GSM, EDGE, W-CDMA
- Frequency Range: 700 to 1000
- Amplifier Type: Low Noise Amplifier; Power Amplifier
- Minimum Gain: 14
from Infineon Technologies AG
BGA7H1BN6 is a front-end low noise amplifier for LTE which covers a wide frequency range from 1805 MHz to 2690 Mhz and operates from1.5 V to 3.3 V supply voltage. The device features a single-line two-state control (Bypass- and High gain-Mode) and OFF-state can be enabled by powering down Vcc. [See More]
- Applications: Mobile / Wireless Systems
- Frequency Range: 1805 to 2690
- RoHS Compliant: RoHS
- Minimum Gain: 12.3
from Skyworks Solutions, Inc.
The SKY85337-11 is a complete 2.4 GHz 802.11ax WLAN RF front-end module (FEM). The device provides all the functionality of a fully matched power amplifier (PA), power detector, low-noise amplifier (LNA), and single-pole, double-throw (SPDT) switch. The SKY85337-11 is a complete 2.4 GHz 802.11ax... [See More]
- Applications: Mobile / Wireless Systems
- Package Type: Surface Mount; Plugin; LGA, 16-pin
- Frequency Range: 2400 to 2500
from Qorvo
Qorvo's TQP3M9040 is a high linearity, ultra low noise figure dual device amplifier in a 4x4 mm package. At 1.95 GHz in a balanced configuration, the LNA provides 18 dB gain, 22 dBm IIP3 and 0.67 dB noise figure. The part does not require a negative supply for operation and is bias adjustable for... [See More]
- Applications: Military / Defense; Mobile / Wireless Systems; Radar Systems
- RoHS Compliant: RoHS
- Amplifier Type: Low Noise Amplifier
- Frequency Range: 1500 to 2300
from A.H. Systems Inc.
A.H. Systems' Preamplifier line is an excellent choice with a rugged design, no hassles with soldering your own power leads and they improve overall system sensitivity by at least 20 dB. All of A.H. Systems' Preamplifiers come with a 15-volt DC regulated power source. A low voltage indicator... [See More]
- Applications: Mobile / Wireless Systems; EMC/EMI Testing
- Frequency Range: 18000 to 40000
- Amplifier Type: Low Noise Amplifier; Broadband Preamplifier
- Minimum Gain: 15
from DigiKey
RF Amplifier IC WiMax 3.3GHz ~ 3.8GHz 24-LFCSP (4x4) [See More]
- Applications: Mobile / Wireless Systems; WiMax
- Frequency Range: 3300 to 3800
- Amplifier Type: Low Noise Amplifier; Power Amplifier
- Minimum Gain: 31
from Skyworks Solutions, Inc.
The SKY85347-11 is a complete 802.11ax WLAN RF front-end module (FEM). The device provides all the functionality of a fully matched power amplifier (PA), power detector, low-noise amplifier (LNA), and single-pole, double-throw (SPDT) switch. The SKY85347-11 provides a complete 2.4 GHz WLAN RF... [See More]
- Applications: Mobile / Wireless Systems
- Package Type: Surface Mount; Plugin; LGA, 16-pin
- Frequency Range: 2400 to 2500
from Qorvo
Qorvo's TQP3M6005 is a low noise dual pHEMT discrete device operating from 1700 to 2000 MHz. Noise figure is typically 0.36 dB per channel and 0.54 dB when used in a balanced configuration with a balun. The part consists of a single monolithic GaAs die mounted in a compact 4 x 4 mm QFN package. This... [See More]
- Applications: Mobile / Wireless Systems
- RoHS Compliant: RoHS
- Amplifier Type: Low Noise Amplifier
- Frequency Range: 1700 to 2000
from A.H. Systems Inc.
Features. Frequency Range of 18 GHz to 40 GHz. High Gain. Individually Calibrated (gain calibration included). Low VSWR. A.H. Systems' Preamplifier line is an excellent choice with a rugged design, no hassles with soldering your own power leads and they improve overall system sensitivity by at least... [See More]
- Applications: Mobile / Wireless Systems; EMC/EMI Testing
- Frequency Range: 18000 to 40000
- Amplifier Type: Low Noise Amplifier; Broadband Preamplifier
- Minimum Gain: 33
from DigiKey
RF Amplifier IC Cellular, CATV 0Hz ~ 6GHz Micro-P [See More]
- Applications: Mobile / Wireless Systems; Cellular, CATV
- Frequency Range: 0.0 to 6000
- Amplifier Type: Low Noise Amplifier; Power Amplifier
- Minimum Gain: 15.5
from Skyworks Solutions, Inc.
Please note: SKY85300-21 is being discontinued and is not recommended for new designs. The suggested replacement is SKY85310-21. The SKY85300-21 is a complete 802.11b/g/n 256 QAM WLAN RF front-end module (FEM) with a port suitable for Bluetooth ® signals. The device provides all functionality... [See More]
- Applications: Mobile / Wireless Systems
- Package Type: Surface Mount; Plugin; QFN, 16-pin
- Frequency Range: 2400 to 2500
- Operating Voltage: 5
from Qorvo
Qorvo's TQP9111 is a two-stage linear driver amplifier in a low-cost surface-mount package. The amplifier is able to achieve high performance with +46 dBm OIP3 and +32.5 dBm P1dB. This linear amplifier integrates two high performance amplifier stages onto a module to allow for a compact system... [See More]
- Applications: Mobile / Wireless Systems
- Frequency Range: 1800 to 2700
- RoHS Compliant: RoHS
- Minimum Gain: 29.8
from A.H. Systems Inc.
A.H. Systems' Preamplifier line is an excellent choice with a rugged design, no hassles with soldering your own power leads and they improve overall system sensitivity by at least 20 dB. All of A.H. Systems' Preamplifiers come with a 15-volt DC regulated power source. A low voltage indicator... [See More]
- Applications: Mobile / Wireless Systems; EMC/EMI Testing
- Frequency Range: 26000 to 40000
- Amplifier Type: Low Noise Amplifier; Broadband Preamplifier
- Minimum Gain: 16
from DigiKey
RF Amplifier IC WiMAX / WiBro 0Hz ~ 6GHz SC-70-6 [See More]
- Applications: Mobile / Wireless Systems; WiMAX / WiBro
- Frequency Range: 0.0 to 6000
- Amplifier Type: Low Noise Amplifier; Power Amplifier
- Minimum Gain: 15
from Skyworks Solutions, Inc.
The SKY85303-21 is a complete 802.11b/g/n WLAN RF front-end module (FEM), that includes a port suitable for Bluetooth ® applications. The device provides all the functionality of a fully matched power amplifier (PA), power detector, harmonic filter, low-noise amplifier (LNA), and single-pole,... [See More]
- Applications: Mobile / Wireless Systems
- Package Type: Surface Mount; Plugin; QFN, 16-pin
- Frequency Range: 2400 to 2500
from Qorvo
Qorvo's TQP9218 is a high-linearity two-stage power amplifier in a low-cost surface-mount package with on-chip bias control and temperature control circuits. The amplifier provides 31 dB gain and +24.5 dBm linear power over the 1.805 – 1.880 GHz frequency range. This amplifier is able to... [See More]
- Applications: Mobile / Wireless Systems
- RoHS Compliant: RoHS
- Amplifier Type: Power Amplifier
- Frequency Range: 1805 to 1880
from A.H. Systems Inc.
Description. An improved 7 GHz preamplifier with input protection. Features. 20 MHz to 7 GHz. Input protection, improved response. Increase dynamic range by 25 dB. Rugged Construction. New and improved! The PAM-0207A preamplifier is an excellent choice for improving system dynamic range. The... [See More]
- Applications: Mobile / Wireless Systems; EMC/RFI Testing
- Frequency Range: 20 to 7000
- Amplifier Type: Low Noise Amplifier; Broadband Preamplifier
- Minimum Gain: 25
from DigiKey
RF Amplifier IC Cellular, CATV 0Hz ~ 4.5GHz SOT-89 [See More]
- Applications: Mobile / Wireless Systems; Cellular, CATV
- Frequency Range: 0.0 to 4500
- Amplifier Type: Low Noise Amplifier; Power Amplifier
- Minimum Gain: 21.5
from Skyworks Solutions, Inc.
The SKY85302-11 is a complete 802.11ac WLAN RF front-end module (FEM) with support for a port suitable for Bluetooth ® signals. The device provides all the functionality of a fully matched power amplifier (PA), power detector, harmonic filter, LNA, and single-pole, triple-throw (SP3T) switch. [See More]
- Applications: Mobile / Wireless Systems
- Package Type: Surface Mount; Plugin; QFN, 16-pin
- Frequency Range: 2400 to 2500
from Qorvo
The QPA9903 is a high-efficiency, linearizable power amplifier targeting Band 3 small-cell wireless infrastructure systems. Using InGaP/GaAs HBT technology, the product delivers high efficiency of 33.8% at +28dBm average output power while providing excellent DPD linearized ACPR of -50dBc for signal... [See More]
- Applications: Mobile / Wireless Systems
- Frequency Range: 1805 to 1880
- RoHS Compliant: RoHS
- Minimum Gain: 32
from DigiKey
RF Amplifier IC WiMAX / WiBro 0Hz ~ 6GHz SC-70-6 [See More]
- Applications: Mobile / Wireless Systems; WiMAX / WiBro
- Frequency Range: 0.0 to 6000
- Amplifier Type: Low Noise Amplifier; Power Amplifier
- Minimum Gain: 19
from Skyworks Solutions, Inc.
The SKY85310-11 is a complete 802.11b/g/n 256 QAM WLAN RF front-end module (FEM) with support for a port suitable for Bluetooth ® applications. The device provides all the functionality of a fully matched power amplifier (PA), power detector, harmonic filter, low-noise amplifier (LNA), and... [See More]
- Applications: Mobile / Wireless Systems
- Package Type: Surface Mount; Plugin; QFN, 16-pin
- Frequency Range: 2400 to 2500
from Qorvo
Qorvo's QPA9801 is a balanced amplifier module with embedded hybrid couplers to convert to single ended input and output ports. The module has an enable pin to allow for shutting down of the amplifier. The module requires minimal external components which are VCC choke inductors, decoupling caps and... [See More]
- Applications: Mobile / Wireless Systems
- Frequency Range: 1805 to 2400
- RoHS Compliant: RoHS
- Minimum Gain: 20
from DigiKey
RF Amplifier IC WiMAX / WiBro 700MHz ~ 1.2GHz 32-QFN (5x5) [See More]
- Applications: Mobile / Wireless Systems; WiMAX / WiBro
- Frequency Range: 700 to 1200
- Amplifier Type: Low Noise Amplifier; Power Amplifier
- Minimum Gain: 29
from Skyworks Solutions, Inc.
The SKY85310-21 is a complete 802.11b/g/n 256 QAM WLAN RF front-end module (FEM) with support for a port suitable for Bluetooth ® applications. The device provides all the functionality of a fully matched power amplifier (PA), power detector, low-noise amplifier (LNA), and single-pole,... [See More]
- Applications: Mobile / Wireless Systems
- Package Type: Surface Mount; Plugin; QFN, 16-pin
- Frequency Range: 2400 to 2500
from Qorvo
Qorvo's QPA9419 is a high-linearity three-stage power amplifier in a low-cost surface-mount package with on-chip bias control and temperature compensation circuits. The amplifier provides 30 dB gain over the 1930-1990 MHz frequency range and can be utilized without the need of linearization... [See More]
- Applications: Military / Defense; Mobile / Wireless Systems
- RoHS Compliant: RoHS
- Amplifier Type: Power Amplifier
- Frequency Range: 1930 to 1990
from DigiKey
RF Amplifier IC LTE, WiMax 600MHz ~ 1.4GHz 24-QFN (4x4) [See More]
- Applications: Mobile / Wireless Systems; LTE, WiMax
- Frequency Range: 600 to 1400
- Amplifier Type: Low Noise Amplifier; Power Amplifier
- Minimum Gain: 32
from Skyworks Solutions, Inc.
Please note: SKY85319-11 is being discontinued and is not recommended for new designs. The suggested replacement is sky85337-11. The SKY85319-11 is a complete 2.4 GHz 802.11ax WLAN RF front-end module (FEM). The device provides all the functionality of a fully matched power amplifier (PA), power... [See More]
- Applications: Mobile / Wireless Systems
- Package Type: Surface Mount; Plugin; QFN, 16-pin
- Frequency Range: 2400 to 2500
from Qorvo
The QPA9122 is a wideband, high gain, and high peak power driver amplifier. It provides 37dB gain at 2.6GHz and achieves a peak power of 27dBm P3dB. With a quiescent current of 95mA, the amplifier can provide good DPD linearity performance with wideband signals of up to 160 MHz IBW making it... [See More]
- Applications: Mobile / Wireless Systems
- Frequency Range: 2300 to 5000
- RoHS Compliant: RoHS
- Minimum Gain: 37
from DigiKey
RF Amplifier IC LTE, WiMax 0Hz ~ 4GHz 40-QFN (6x6) [See More]
- Applications: Mobile / Wireless Systems; LTE, WiMax
- Frequency Range: 0.0 to 4000
- Amplifier Type: Low Noise Amplifier; Power Amplifier
- Minimum Gain: 18.5
from Skyworks Solutions, Inc.
The SKY85330-11 is a complete 802.11b/g/n 256 QAM WLAN RF front-end module (FEM). The device provides all the functionality of a fully matched power amplifier (PA), power detector, low-noise amplifier (LNA), and single-pole, double-throw (SPDT) switch. The SKY85330-11 provides a complete 2.4 GHz... [See More]
- Applications: Mobile / Wireless Systems
- Package Type: Surface Mount; Plugin; QFN, 16-pin
- Frequency Range: 2400 to 2500
from Qorvo
The Qorvo QPA5219 is a three-stage power amplifier (PA) designed for Wi-Fi. The compact form factor and integrated matching minimizes layout area in the application. Performance is focused on optimizing for power consumption while maintaining the highest linear output power and leading edge... [See More]
- Applications: Mobile / Wireless Systems
- RoHS Compliant: RoHS
- Amplifier Type: Power Amplifier
- Frequency Range: 2400 to 2500
from DigiKey
RF Amplifier IC WLAN 40MHz ~ 1GHz 20-QFN (4x4) [See More]
- Applications: Mobile / Wireless Systems; WLAN
- Frequency Range: 40 to 1000
- Amplifier Type: Low Noise Amplifier; Power Amplifier
- Minimum Gain: 16.5
from Skyworks Solutions, Inc.
Please note: SKY85312-11 is being discontinued and is not recommended for new designs. The SKY85312-11 is a complete 802.11b/g/n/ac WLAN RF front-end module (FEM) with a port suitable for a Bluetooth ® signal. The device provides all the functionality of a fully matched power amplifier (PA),... [See More]
- Applications: Mobile / Wireless Systems
- Package Type: Surface Mount; Plugin; QFN, 16-pin
- Frequency Range: 2400 to 2500
from Qorvo
Qorvo's TQP3M9018 is a cascadable, high linearity gain block amplifier in a low-cost surface mount package. At 1.9 GHz, the amplifier typically provides 20.5 dB gain, +37 dBm OIP3 and 1.3 dB Noise Figure while only drawing 85 mA current. The device is housed in a lead-free / green / RoHS compliant... [See More]
- Applications: Military / Defense; Mobile / Wireless Systems; Radar Systems
- RoHS Compliant: RoHS
- Amplifier Type: Low Noise Amplifier
- Frequency Range: 20 to 4000
from DigiKey
RF Amplifier IC LTE, WiMax 0Hz ~ 10GHz 6-LFCSP (2x2) [See More]
- Applications: Mobile / Wireless Systems; LTE, WiMax
- Frequency Range: 0.0 to 10000
- Amplifier Type: Low Noise Amplifier; Power Amplifier
- Minimum Gain: 12
from Skyworks Solutions, Inc.
The SKY85320-11 is a complete 802.11b/g/n/ac WLAN RF front-end module (FEM) with a port suitable for Bluetooth ® signals. The device provides all the functionality of a fully matched power amplifier (PA), power detector, harmonic filter, low-noise amplifier (LNA), and single-pole, triple-throw... [See More]
- Applications: Mobile / Wireless Systems
- Package Type: Surface Mount; Plugin; QFN, 16-pin
- Frequency Range: 2400 to 2500
from Qorvo
Qorvo's TQP3M9019 is a cascadable, high linearity gain block amplifier in a low-cost surface mount package. At 1.9 GHz, the amplifier typically provides 22 dB gain, +39.5 dBm OIP3 and 1.3 dB Noise Figure while only drawing 115 mA current. The device is housed in a lead-free / green / RoHS compliant... [See More]
- Applications: Military / Defense; Mobile / Wireless Systems; Radar Systems
- RoHS Compliant: RoHS
- Amplifier Type: Low Noise Amplifier
- Frequency Range: 20 to 4000
from DigiKey
RF Amplifier IC 802.11/WiFi, WLAN 50GHz ~ 66GHz Die [See More]
- Applications: Mobile / Wireless Systems; 802.11/WiFi, WLAN
- Frequency Range: 50000 to 66000
- Amplifier Type: Low Noise Amplifier; Power Amplifier
- Minimum Gain: 24
from Skyworks Solutions, Inc.
The SKY85321-21 is a complete 802.11b/g/n/ac WLAN RF front-end module (FEM). The device provides all the functionality of a fully-matched power amplifier (PA), power detector, harmonic filter, low-noise amplifier (LNA), and single-pole, triple-throw (SP3T) switch. The SKY85321-21 provides a complete... [See More]
- Applications: Mobile / Wireless Systems
- Package Type: Surface Mount; Plugin; QFN, 16-pin
- Frequency Range: 2400 to 2500
from Qorvo
Qorvo's TQP9221 is a high-linearity two-stage power amplifier in a low-cost surface-mount package with on-chip bias control and temperature compensation circuits. The amplifier provides 30.5 dB gain over the 2010 – 2170 MHz frequency range and be utilized without the need of linearization... [See More]
- Applications: Mobile / Wireless Systems
- RoHS Compliant: RoHS
- Amplifier Type: Power Amplifier
- Frequency Range: 2010 to 2170
from DigiKey
RF Amplifier IC 802.11/WiFi, WLAN 57GHz ~ 65GHz Die [See More]
- Applications: Mobile / Wireless Systems; 802.11/WiFi, WLAN
- Frequency Range: 57000 to 65000
- Amplifier Type: Low Noise Amplifier; Power Amplifier
- Minimum Gain: 21
from Skyworks Solutions, Inc.
The SKY85329-11 is a complete 802.11b/g/n WLAN RF front-end module (FEM. The device provides all the functionality of a fully matched power amplifier (PA), power detector, low-noise amplifier (LNA), and single-pole, dual-throw (SPDT) switch. The SKY85329-11 provides a complete 2.4 GHz WLAN RF... [See More]
- Applications: Mobile / Wireless Systems
- Package Type: Surface Mount; Plugin; QFN, 16-pin
- Frequency Range: 2400 to 2500
from Qorvo
The QPB9378 is a highly integrated RF front-end module targeted for 5G TDD base stations. The module integrates a two-stage LNA and a high-power SPDT switch in a dual channel configuration. It features a 2nd stage LNA with bypass functionality and power down mode for LNA when in transmit mode. The... [See More]
- Applications: Mobile / Wireless Systems
- RoHS Compliant: RoHS
- Amplifier Type: Low Noise Amplifier
- Frequency Range: 2300 to 5000
from DigiKey
RF Amplifier IC 802.11/WiFi, WLAN 71GHz ~ 86GHz Die [See More]
- Applications: Mobile / Wireless Systems; 802.11/WiFi, WLAN
- Frequency Range: 71000 to 86000
- Amplifier Type: Low Noise Amplifier; Power Amplifier
- Minimum Gain: 16
from Skyworks Solutions, Inc.
2.5 to 2.7 GHz Mobile WiMAX/LTE Power Amplifier Module [See More]
- Applications: Mobile / Wireless Systems
- Minimum Gain: 31
- Amplifier Type: Power Amplifier
- Maximum Gain: 31
from Qorvo
Qorvo's TQP9224 is a high-linearity three-stage power amplifier in a low-cost surface-mount package with on-chip bias control and temperature control circuits, suitable for small cell or enterprise Femto cell base station applications. The TQP9224 provides 38 dB high gain and -50 dBc ACLR at +24 dBm... [See More]
- Applications: Mobile / Wireless Systems
- RoHS Compliant: RoHS
- Amplifier Type: Power Amplifier
- Frequency Range: 2300 to 2400
from DigiKey
RF Amplifier IC WLAN 0Hz ~ 4GHz SOT-89 [See More]
- Applications: Mobile / Wireless Systems; WLAN
- Frequency Range: 0.0 to 4000
- Amplifier Type: Low Noise Amplifier; Power Amplifier
- Minimum Gain: 15
from Skyworks Solutions, Inc.
3.3 to 3.8 GHz Mobile WiMAX Power Amplifier Module [See More]
- Applications: Mobile / Wireless Systems
- Minimum Gain: 31
- Amplifier Type: Power Amplifier
- Maximum Gain: 31
from Qorvo
The QPA9807 is a balanced amplifier module with embedded hybrid couplers to convert to single ended input and output ports. The module has an enable pin to allow for shutting down of the amplifier. The module requires minimal external components which are VCC choke inductors, decoupling caps and... [See More]
- Applications: Mobile / Wireless Systems
- Frequency Range: 2300 to 2700
- RoHS Compliant: RoHS
- Minimum Gain: 20
from DigiKey
RF Amplifier IC WLAN 0Hz ~ 6GHz SOT-23-6 [See More]
- Applications: Mobile / Wireless Systems; WLAN
- Frequency Range: 0.0 to 6000
- Amplifier Type: Low Noise Amplifier; Power Amplifier
- Minimum Gain: 17
from Skyworks Solutions, Inc.
The SKY85772-11 is a highly integrated, 5 GHz front-end module (FEM) incorporating a 5 GHz transmit/receive (T/R) switch, a 5 GHz low-noise amplifier (LNA) with bypass, and a 5 GHz power amplifier (PA) intended for mobile/portable 802.11ax applications and systems. An integrated power detector is... [See More]
- Applications: Mobile / Wireless Systems
- Package Type: Surface Mount; Plugin; QFN, 16-pin
- Frequency Range: 5150 to 5850
from Qorvo
Qorvo's TQP3M9041 is a high linearity, ultra low noise figure dual device amplifier in a 4x4 mm package. At 1.95 GHz in a balanced configuration, the LNA provides 18.4 dB gain, 20 dBm IIP3 and 0.80 dB noise figure. The part does not require a negative supply for operation and is bias adjustable for... [See More]
- Applications: Military / Defense; Mobile / Wireless Systems; Radar Systems
- RoHS Compliant: RoHS
- Amplifier Type: Low Noise Amplifier
- Frequency Range: 2300 to 6000
from DigiKey
RF Amplifier IC CDMA, GSM, EDGE, W-CDMA 3.5GHz ~ 8GHz 24-CLCC (3.9x3.9) [See More]
- Applications: Mobile / Wireless Systems; CDMA, GSM, EDGE, W-CDMA
- Frequency Range: 3500 to 8000
- Amplifier Type: Low Noise Amplifier; Power Amplifier
- Minimum Gain: 17
from Skyworks Solutions, Inc.
The SKY85709-11 is a highly-integrated, 5 GHz Front-End Module (FEM) incorporating a 5 GHz Single-Pole, Double-Throw (SPDT) transmit/receive (T/R) switch, a 5 GHz Low-Noise Amplifier (LNA) with bypass, and a 5 GHz Power Amplifier (PA) intended for mobile/portable 802.11n/ac applications and systems. [See More]
- Applications: Mobile / Wireless Systems
- Package Type: Surface Mount; Plugin; QFN, 16-pin
- Frequency Range: 4900 to 5250
- Operating Voltage: 3
from Qorvo
Qorvo's QPA9226 is a high-linearity three-stage power amplifier in a low-cost surface-mount package with on-chip bias control and temperature control circuits, suitable for small cell or enterprise Femto cell base station applications. The QPA9226 provides 34 dB high gain and −47 dBc ACLR at... [See More]
- Applications: Mobile / Wireless Systems
- RoHS Compliant: RoHS
- Amplifier Type: Power Amplifier
- Frequency Range: 2500 to 2700
from DigiKey
RF Amplifier IC Cellular 400MHz ~ 500MHz 8-SOIC [See More]
- Applications: Mobile / Wireless Systems; Cellular
- Frequency Range: 400 to 500
- Amplifier Type: Low Noise Amplifier; Power Amplifier
- Minimum Gain: 21
from Skyworks Solutions, Inc.
The SKY85748-11 is a highly integrated, 5 GHz front-end module (FEM) incorporating a 5 GHz single-pole, double-throw (SPDT) transmit/receive (T/R) switch, a 5 GHz low-noise amplifier (LNA) with bypass, and a 5 GHz power amplifier (PA) intended for mobile/portable 802.11ax applications and systems. [See More]
- Applications: Mobile / Wireless Systems
- Package Type: Surface Mount; Plugin; QFN, 16-pin
- Frequency Range: 5150 to 5925
from Qorvo
Qorvo's QPA9426 is a high-linearity three-stage power amplifier in a low-cost surface-mount package with on-chip bias control and temperature compensation circuits. The amplifier provides 34 dB gain over the 2.5 - 2.7 GHz frequency range and can be utilized without the need of linearization... [See More]
- Applications: Mobile / Wireless Systems
- RoHS Compliant: RoHS
- Amplifier Type: Power Amplifier
- Frequency Range: 2500 to 2700
from DigiKey
RF Amplifier IC Cellular, Radar 0Hz ~ 2.7GHz TO-272S-4I [See More]
- Applications: Mobile / Wireless Systems; Cellular, Radar
- Frequency Range: 0.0 to 2700
- Amplifier Type: Low Noise Amplifier; Power Amplifier
- Minimum Gain: 16.3
from Skyworks Solutions, Inc.
Please note: SKY65535-11 is being discontinued and is not recommended for new designs. The suggested replacement is SKY85716-11. The SKY65535-11 is a highly-integrated, 5 GHz Front-End Module (FEM) incorporating a 5 GHz Single-Pole, Double-Throw (SPDT) transmit/receive (T/R) switch, a 5 GHz... [See More]
- Applications: Mobile / Wireless Systems
- Package Type: Surface Mount; Plugin; QFN, 16-pin
- Frequency Range: 5150 to 5950
from Qorvo
Qorvo's QPA2210D is a Ka-band power amplifier fabricated on Qorvo's 0.15 um GaN on SiC process (QGaN15). Operating between 27 and 31 GHz, it achieves 2.5 W linear power with −25 dBc intermodulation distortion products and 25 dB small signal gain. Saturated output power is 7 W with power-added... [See More]
- Applications: Military / Defense; Mobile / Wireless Systems
- Frequency Range: 27000 to 31000
- RoHS Compliant: RoHS
- Minimum Gain: 16
from DigiKey
IC AMP CELLULAR 1GHZ-5GHZ 6DFN [See More]
- Applications: Mobile / Wireless Systems; Cellular, Radar
- Frequency Range: 1000 to 5000
- Amplifier Type: Low Noise Amplifier; Power Amplifier
- Minimum Gain: 17.7
from Skyworks Solutions, Inc.
Please note: SKY85702-11 is being discontinued and is not recommended for new designs. The suggested replacement is SKY85709-11. The SKY85702-11 is a highly-integrated, 5 GHz Front-End Module (FEM) incorporating a 5 GHz Single-Pole, Double-Throw (SPDT) transmit/receive (T/R) switch, and a 5 GHz... [See More]
- Applications: Mobile / Wireless Systems
- Package Type: Surface Mount; Plugin; QFN, 16-pin
- Frequency Range: 4900 to 5850
- Operating Voltage: 3
from Qorvo
Qorvo's QPA2212 is a Ka-band power amplifier fabricated on Qorvo's 0.15um GaN on SiC process (QGaN15). Operating between 27.5 and 31 GHz, it achieves 20 W saturated output power. QPA2212 is ideally suited to support satellite communications and 5G infrastructure. To simplify system integration, the... [See More]
- Applications: Mobile / Wireless Systems; SATCOM
- RoHS Compliant: RoHS
- Amplifier Type: Power Amplifier
- Frequency Range: 27500 to 31000
from DigiKey
IC AMP CELL 30MHZ-2.7GHZ 6DFN [See More]
- Applications: Mobile / Wireless Systems; Cellular, Radar
- Frequency Range: 30 to 2700
- Amplifier Type: Low Noise Amplifier; Power Amplifier
- Minimum Gain: 11.6
from Skyworks Solutions, Inc.
The SKY85703-11 is a highly-integrated, 5 GHz Front-End Module (FEM) incorporating a 5 GHz Single-Pole, Double-Throw (SPDT) transmit/receive (T/R) switch, a 5 GHz Low-Noise Amplifier (LNA) with bypass, and a 5 GHz Power Amplifier (PA) intended for mobile/portable 802.11ac applications and systems. [See More]
- Applications: Mobile / Wireless Systems
- Package Type: Surface Mount; Plugin; QFN, 16-pin
- Frequency Range: 5150 to 5850
- Operating Voltage: 3
from Broadcom Inc.
MGA-30489 is a 0.25W high dynamic range Drive Amplifier MMIC, housed in a SOT-89 standard plastic package. The device features excellent input and output return loss, highly linear performance. [See More]
- Applications: Mobile / Wireless Systems
- RoHS Compliant: RoHS
- Amplifier Type: Low Noise Amplifier
- Frequency Range: 250 to 3000
from AR RF/Microwave Instrumentation
The Model 350S1G6A is a portable, self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth, high gain, and linearity are required. The Model 350S1G6A, when used with a sweep generator, will provide a minimum of 350 W of RF power. [See More]
- Applications: Mobile / Wireless Systems
- Output Power: 55.44
- Frequency Range: 700 to 6000
from Rohde & Schwarz USA, Inc.
The R &S ®BBA130 broadband amplifiers offer a variety of setting options so you can optimally tune the output signal to your specific application. During operation, you can adjust the operating class for transistors between Class A and Class AB as well as choose between maximum output power... [See More]
- Applications: Mobile / Wireless Systems
- Frequency Range: 6 to 80
- Amplifier Type: Power Amplifier
- Gain Flatness: 3.8
from Crescend Technologies, LLC
Having the same features as our C5 models, the design of these amplifiers allows for 5 units in the space of one. Designed to be fully modular and space efficient, the 5-pack series also provides continuous duty operation. Rack FPR-5 sold separately. [See More]
- Applications: Mobile / Wireless Systems
- Frequency Range: 764 to 870
- Amplifier Type: Power Amplifier
- Output Power: 49.03
from NuWaves Ltd.
The NuPower ™ 11B02A Mini Multi-Octave PA (MOPA) is a broadband, high-performance miniature solid-state power amplifier delivering 10 watts* of RF power for CW and near-constant-envelope waveforms across the frequency band of 200 to 2600 MHz. The NuPower 11B02A is the only model in the NuPower... [See More]
- Applications: Military / Defense; Mobile / Wireless Systems
- Frequency Range: 200 to 2600
- Amplifier Type: Power Amplifier
- Minimum Gain: 40
from Kaelus
Tower Mounted Amplifiers (TMAs), also known as Masthead amplifiers (MHA) or Tower Top Low Noise Amplifiers (TTLNA,) provide a cost effective way for network operators to improve site performance. Kaelus manufactures TMAs for every band which amplifies weak uplink signals from mobile subscribers... [See More]
- Applications: Mobile / Wireless Systems; RF Microwave
- Frequency Range: 778 to 2570
- Amplifier Type: Low Noise Amplifier
- Minimum Gain: 11
from Broadcom Inc.
Avago Technologies has combined its industry leading. E-pHEMT technology with a revolutionary chip scale package. This product is easy to use since it requires only positive DC voltages for bias and no matching coefficients are required for impedance matching to 50 Ω systems. [See More]
- Applications: Military / Defense; Mobile / Wireless Systems; Radar Systems
- Frequency Range: 500 to 600
- Amplifier Type: E-pHEMT Amplifier
- Package Type: Surface Mount
from AR RF/Microwave Instrumentation
The Model 500S1G6A is a portable, self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth, high gain, and linearity are required. The Model 500S1G6A, when used with a sweep generator, will provide a minimum of 500 W of RF power. [See More]
- Applications: Mobile / Wireless Systems
- Output Power: 56.99
- Frequency Range: 700 to 6000
from Rohde & Schwarz USA, Inc.
The R &S ®BBA150 broadband amplifier family generates power in the frequency range from 9 kHz to 6 GHz. The compact amplifiers are rugged and feature high availability. They are ideal for amplitude, frequency, phase and pulse modulation. Extensive switching options for input, output and... [See More]
- Applications: Mobile / Wireless Systems
- Frequency Range: 0.0090 to 6000
- Amplifier Type: Power Amplifier
- Gain Flatness: 4
from NuWaves Ltd.
The NuPower ™ 11C01A Multi-Octave Power Amplifier (MOPA) utilizes GaN technology to deliver 15 watts of RF power for CW and near-constant-envelope waveforms from 225 MHz to 2.4 GHz, covering VHF, UHF, L-band and S-band frequencies. Based on the latest Gallium Nitride (GaN) technology, the... [See More]
- Applications: Military / Defense; Mobile / Wireless Systems
- Frequency Range: 225 to 2400
- Amplifier Type: Power Amplifier
- Minimum Gain: 40
from Broadcom Inc.
MGA-665P8 low noise amplifier is designed for wireless applications in the 0.5-6GHz frequency range. At 5.25GHz, 3V, 20.5mA (typ). 1.45dB NF. 16dB Gain. 18.1dBm OIP3 [See More]
- Applications: Mobile / Wireless Systems
- Frequency Range: 500 to 6000
- Amplifier Type: Low Noise Amplifier
- Minimum Gain: 16
from AR RF/Microwave Instrumentation
The Model 125S1G6 is a solid-state, Class A design, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth, high gain, and linearity are required. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use but can be removed from... [See More]
- Applications: Mobile / Wireless Systems
- Output Power: 50.97
- Frequency Range: 700 to 6000
from Rohde & Schwarz USA, Inc.
The R &S ®BBL200 broadband amplifiers are ideal for applications requiring high RF power. The R &S ®BBL200 broadband amplifiers generate 3 kW, 5 kW and 10 kW of power in a frequency range from 9 kHz to 225 MHz. They are liquid-cooled, solidstate, highly rugged, quiet and efficient. [See More]
- Applications: Mobile / Wireless Systems
- Frequency Range: 0.0090 to 225
- Amplifier Type: Power Amplifier
- Minimum Gain: 6.82 to 68.2
from NuWaves Ltd.
The NuPower ™ 12A01A L- & S-Band Power Amplifier is a small, highly efficient solid-state power amplifier module that provides 4 watts of linear RF power to boost performance of data links and transmitters. Based on the latest gallium nitride (GaN) technology, this broadband linear RF power... [See More]
- Applications: Military / Defense; Mobile / Wireless Systems
- Frequency Range: 1000 to 2500
- Amplifier Type: Power Amplifier
- Minimum Gain: 40
from Broadcom Inc.
The VMMK-3603 is a small and easy-to-use, broadband, positive gain slope low noise amplifier operating in various frequency bands from 1 to 6 GHz with typical noise figure of 1.4dB. It is housed in the Avago Technologies' industry-leading and revolutionary sub-miniature WaferCap chip scale package... [See More]
- Applications: Mobile / Wireless Systems; Radar Systems
- RoHS Compliant: RoHS
- Amplifier Type: Low Noise Amplifier
- Frequency Range: 1000 to 6000
from AR RF/Microwave Instrumentation
The Model 250S1G6 is a solid-state, Class A design, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth, high gain, and linearity are required. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use but can be removed from... [See More]
- Applications: Mobile / Wireless Systems
- Output Power: 53.98
- Frequency Range: 700 to 6000
from NuWaves Ltd.
The NuPower ™ 12A03A Micro L- & S-band radio frequency (RF) power amplifier boasts the industry's smallest form factor in its class of PAs at 1.62 cubic inches and provides 5 watts of RF power for CW and near-constant-envelope waveforms from 1.0 to 2.5 GHz. Based on the latest gallium nitride... [See More]
- Applications: Military / Defense; Mobile / Wireless Systems
- Frequency Range: 1000 to 2500
- Amplifier Type: Power Amplifier
- Minimum Gain: 37
from Broadcom Inc.
Avago Technologies' ALM-12124 is a multi-chip integrated module that comprise of a 50 Watt CW high power SPDT switch, low noise amplifier and 2nd stage high gain driver amplifier throught the use of Avago Technologies ’ proprietary 0.25um GaAs E-pHEMT process. [See More]
- Applications: Mobile / Wireless Systems
- RoHS Compliant: RoHS
- Amplifier Type: Low Noise Amplifier; Driver Amplifier
- Frequency Range: 100 to 8000
from AR RF/Microwave Instrumentation
The Model 60S1G6 is a solid-state, Class A design, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth, high gain, and linearity are required. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use but can be removed from... [See More]
- Applications: Mobile / Wireless Systems
- Output Power: 47.78
- Frequency Range: 700 to 6000
from NuWaves Ltd.
The NuPower ™ 12B01A L- & S-Band Power Amplifier is a broadband, high-performance solid-state power amplifier module designed to have a very low SWaP profile. This unidirectional SSPA provides up to 50% module efficiency, delivering at least 10 watts of RF power for CW and... [See More]
- Applications: Military / Defense; Mobile / Wireless Systems
- Frequency Range: 1000 to 2500
- Amplifier Type: Power Amplifier
- Minimum Gain: 42
from Broadcom Inc.
AMMC-6333 ia a broadband 0.2W MMIC driver amplifier designed for use in transmitters operating in various frequency bands from 18GHz to 33GHz. It is fabricated using Avago Technologies' unique 0.25 μm E-mode PHEMT technology which eliminates the need for negative gate biasing voltage. [See More]
- Applications: Mobile / Wireless Systems; SATCOM; RF Microwave
- RoHS Compliant: RoHS
- Amplifier Type: Driver Amplifier
- Frequency Range: 18000 to 33000
from AR RF/Microwave Instrumentation
The Model 100U1000A is a solid-state, Class A design, self-contained, air-cooled, broadband power amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. It will provide a minimum of 100 W across its operating bandwidth. Protection from input... [See More]
- Applications: Mobile / Wireless Systems
- Output Power: 50
from NuWaves Ltd.
The NuPower ™ 12D05A is a small, highly efficient, connectorized solid state power amplifier that delivers up to 35 watts of RF power from 1700 to 2400 MHz to extend the operational range of data links and transmitters. The NuPower 12D05A accepts a nominal 0 dBm (1 mW) RF input and provides 44... [See More]
- Applications: Military / Defense; Mobile / Wireless Systems
- Frequency Range: 1700 to 2400
- Amplifier Type: Power Amplifier
- Minimum Gain: 45
from Broadcom Inc.
AMMP-6333 ia a broadband 0.2W driver amplifier designed for use in transmitters operating in various frequency bands from 18GHz to 33GHz. It is fabricated using Avago Technologies' unique 0.25 μm E-mode PHEMT technology which eliminates the need for negative gate biasing voltage. [See More]
- Applications: Mobile / Wireless Systems; SATCOM; RF Microwave
- RoHS Compliant: RoHS
- Amplifier Type: Driver Amplifier
- Frequency Range: 18000 to 33000
from AR RF/Microwave Instrumentation
The Model 125S1G6C is a solid-state, Class A design, self-contained, air-cooled, broadband power amplifier designed for applications where instantaneous bandwidth, high gain, and linearity are required. It will provide a minimum of 125 W across its operating bandwidth of 1.0 – 6.0 GHz. [See More]
- Applications: Mobile / Wireless Systems
- Output Power: 50.97
- Frequency Range: 1000 to 6000
from NuWaves Ltd.
The NuPower ™ 13G05A L-Band Power Amplifier is a small, ultra-high-efficiency solid-state power amplifier module for CW operation that delivers, on average, 50 watts of RF power from 800 MHz to 2 GHz, to boost signal power levels of data links and transmitters for communications range... [See More]
- Applications: Military / Defense; Mobile / Wireless Systems
- Frequency Range: 800 to 2000
- Amplifier Type: Power Amplifier
- Minimum Gain: 45
from Broadcom Inc.
The Avago AMMC-6425 MMIC is a broadband 1W power amplifier designed for use in transmitters that operate in various frequency bands between 18 GHz and 28 GHz. This MMIC optimized for linear operation with an output third order intercept point (OIP3) of 38dBm. [See More]
- Applications: Military / Defense; Mobile / Wireless Systems
- Frequency Range: 18000 to 28000
- Amplifier Type: Power Amplifier
- Minimum Gain: 20
from AR RF/Microwave Instrumentation
The Model 100S1G6AB is a solid-state, Class AB design, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth, high gain, and linearity are required. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use but can be removed... [See More]
- Applications: Mobile / Wireless Systems
- Output Power: 50
- Frequency Range: 1000 to 6000
from NuWaves Ltd.
The NuPower ™ 15D05A L- & S-Band Power Amplifier is a small, highly efficient, connectorized solid state power amplifier that delivers over 20 watts of RF power from 800 to 2500 MHz to extend the operational range of data links and transmitters. The NuPower 15D05A accepts a nominal 0 dBm (1... [See More]
- Applications: Military / Defense; Mobile / Wireless Systems
- Frequency Range: 800 to 2500
- Amplifier Type: Power Amplifier
- Minimum Gain: 44
from Broadcom Inc.
The Avago AMMC-6233 is a high gain, low noise amplifier (LNA) that operates from 18GHz to 32GHz. This MMIC LNA provides a wide-band system design solution. The device has a 50ohm input / output match, is unconditionally stable, and can be used as either a primary or sub-sequential low noise gain... [See More]
- Applications: Mobile / Wireless Systems; SATCOM; RF Microwave
- RoHS Compliant: RoHS
- Amplifier Type: Low Noise Amplifier
- Frequency Range: 18000 to 32000
from NuWaves Ltd.
The NuPower ™ LS100A01 L- & S-Band Power Amplifier is a small, ultra-high-power solid-state power amplifier module for CW operation that delivers a minimum of 100 watts of RF power from 1600 MHz to 2500 MHz to boost signal power levels of data links and transmitters for communications range... [See More]
- Applications: Military / Defense; Mobile / Wireless Systems
- Frequency Range: 1600 to 2500
- Amplifier Type: Power Amplifier
- Minimum Gain: 20
from Broadcom Inc.
The Avago AMMP-6232 is an easy-to-use broadband, high gain, high linearity, Low Noise Amplifier in a surface mount package. The wide band and unconditionally stable performance makes this MMIC ideal as a primary or sub-sequential low noise block or a transmitter driver. The MMIC has four gain stages... [See More]
- Applications: Mobile / Wireless Systems; SATCOM; RF Microwave
- RoHS Compliant: RoHS
- Amplifier Type: Low Noise Amplifier
- Frequency Range: 18000 to 32000
from Broadcom Inc.
The Avago Technologies AMMC-6232 is an easy-to-use broadband, high gain, high linearity Low Noise Amplifier that operates from 18 GHz to 32GHz. The wide band and unconditionally stable performance makes this MMIC ideal as a primary or sub-sequential low noise block or a transmitter or LO driver. The... [See More]
- Applications: Mobile / Wireless Systems; SATCOM; RF Microwave
- RoHS Compliant: RoHS
- Amplifier Type: Low Noise Amplifier
- Frequency Range: 18000 to 32000
from Broadcom Inc.
The Avago Technologies MGA-43328 is a power amplifier for use in the (2.5-2.7)GHz band. High linear output power at 5V is achieved through the use of Avago Technologies' proprietary 0.25um GaAs Enhancement-mode pHEMT process. [See More]
- Applications: Mobile / Wireless Systems
- Frequency Range: 2300 to 2500
- Amplifier Type: Power Amplifier
- Minimum Gain: 35
from Broadcom Inc.
The Avago Technologies MGA-43328 is a power amplifier for use in the (2.5-2.7)GHz band. High linear output power at 5V is achieved through the use of Avago Technologies' proprietary 0.25um GaAs Enhancement-mode pHEMT process. [See More]
- Applications: Mobile / Wireless Systems
- Frequency Range: 2500 to 2700
- Amplifier Type: Power Amplifier
- Minimum Gain: 35
from Broadcom Inc.
The Avago AMGP-6434 power amplifier is a surface mount packaged 4-Watt amplifier that operates from frequencies between 28-31GHz. AMGP-6434 power amplifier is also suitable for high linear application where the PA demonstrates greater than -40 dBc of third order output inter modulation (OIM3) at +20... [See More]
- Applications: Mobile / Wireless Systems
- RoHS Compliant: RoHS
- Amplifier Type: Power Amplifier
- Frequency Range: 28000 to 31000
from Broadcom Inc.
The AMMP-5024 is a broadband PHEMT GaAs MMIC travelling wave amplifier (TWA) designed for medium output power and high gain over the full 100 kHz to 40 GHz frequency range. The design employs a 9-stage, cascade-connected FET structure to ensure flat gain and power as well as uniform group delay. [See More]
- Applications: Mobile / Wireless Systems
- Frequency Range: 100 to 40000
- Amplifier Type: Traveling Wave Amplifier
- Minimum Gain: 15
from Broadcom Inc.
The Avago AMMC-5025 is a 30KHz to 80GHz ultra broadband traveling wave amplifier. This device is suitable for instrumentation and high speed digital communications. [See More]
- Applications: Mobile / Wireless Systems
- RoHS Compliant: RoHS
- Amplifier Type: Traveling Wave Amplifier
- Frequency Range: 0.0300 to 80000
from Broadcom Inc.
Avago Technologies' AMMP-6130 is a high gain, narrowband doubler and output power amplifier designed for DBS applications and other commercial communication systems. The MMIC takes an input 15 GHz signal and passes it through a harmonic frequency multiplier (x2) and then three stages of power... [See More]
- Applications: Mobile / Wireless Systems
- Frequency Range: 15000 to 30000
- Amplifier Type: Power Amplifier; Multiplier
- Minimum Gain: 16
from Broadcom Inc.
The MGA-81 is a 3V part with 14dBm P1dB. It is housed in the miniature SOT-363 package and designed for 3V driver amplifier applications. Bias: 3V, 42mA; Gain = 12dB; NF = 2.8dB; P1dB = 14.8dBm; IP3i = 11dB all at 2GHz. [See More]
- Applications: Mobile / Wireless Systems; SATCOM
- Frequency Range: 100 to 6000
- Amplifier Type: Buffer; Driver Amplifier
- Minimum Gain: 12.4
from Broadcom Inc.
The MGA-725M4 is a low noise amplifier with built-in bypass switch in a miniature leadless package. It is housed in the MiniPak 1412 package and designed for 3V cellular/PCS applications, e.g. LNA and driver amplifier in CDMA handsets. Bias: 3V, 20mA; Gain = 14.4dB; NF = 1.4dB; IP3i = 9.9dBm all at... [See More]
- Applications: Mobile / Wireless Systems
- Frequency Range: 100 to 6000
- Amplifier Type: Low Noise Amplifier
- Minimum Gain: 14.4
from Broadcom Inc.
The MGA-72543 is a low noise amplifier with built-in bypass switch. It is housed in the miniature SOT-343 package and designed for 3V cellular/PCS applications, e.g. LNA and driver amplifier in CDMA handsets. Bias: 3V, 20mA; Gain = 14.4dB; NF = 1.5dB; IP3i = 10.5dB all at 2GHz. In bypass mode,... [See More]
- Applications: Mobile / Wireless Systems
- Frequency Range: 100 to 6000
- Amplifier Type: Low Noise Amplifier
- Minimum Gain: 14.4
from Broadcom Inc.
The AMMP-6408 MMIC is a broadband 1W power amplifier in a surface mount package designed for use in transmitters that operate in various frequency bands between 6 GHz and 18 GHz. At 8 GHz, it provides 29 dBm of output power (P-1dB) and 20 dB of small-signal gain from a small easy-to-use device. This... [See More]
- Applications: Mobile / Wireless Systems; SATCOM; RF Microwave
- RoHS Compliant: RoHS
- Amplifier Type: Power Amplifier
- Frequency Range: 6000 to 18000
from Broadcom Inc.
The Avago AMMP-5618 is a high power, medium gain amplifier that operates from 6 GHz to 20 GHz. This device is designed to be an easy-to-use component for any surface mount PCB application. [See More]
- Applications: Mobile / Wireless Systems
- Frequency Range: 6000 to 20000
- Amplifier Type: Two-Stage Amplifier
- Minimum Gain: 14.5
from Broadcom Inc.
Avago Technologies AMMP-6222 is an easy-to-use broadband, high gain, high linearity Low Noise Amplifier in a surface mount package. The wide band and unconditionally stable performance makes this MMIC ideal as a primary or sub-sequential low noise block or a transmitter or LO driver. The MMIC has... [See More]
- Applications: Mobile / Wireless Systems; SATCOM; RF Microwave
- RoHS Compliant: RoHS
- Amplifier Type: Low Noise Amplifier
- Frequency Range: 7000 to 21000
from Broadcom Inc.
Avago Technologies ’ MGA-30116 is a high linearity ½ Watt PA with good OIP3 performance and exceptionally good PAE at p1dB gain compression point, achieved through the use of Avago Technologies ’ proprietary 0.25um GaAs Enhancement-mode pHEMT process. [See More]
- Applications: Mobile / Wireless Systems
- RoHS Compliant: RoHS
- Amplifier Type: Low Noise Amplifier
- Frequency Range: 400 to 1000
from Broadcom Inc.
The MGA-68563 is an easy to use, economical GaAs MMIC amplifier that offers excellent linearity and low noise figure for applications from 0.1 to 1.5GHz. Packaged in a miniature SOT-363 package, it requires half the board space of a SOT-143 package. [See More]
- Applications: Mobile / Wireless Systems
- RoHS Compliant: RoHS
- Amplifier Type: Low Noise Amplifier
- Frequency Range: 100 to 8000