Printed Circuit Board Current Sensors
from Richardson RFPD
Flux Gate Current Sensors F01P***S05 Series. Features: Closed Loop type, Printed circuit board mounting, Unipolar power supply, Integrated Primary, Insulated plastic case according to UL94V0. [See More]
- Mounting / Configuration: Printed Circuit Board
- Current: 6
- Technology: Flux Gate
- Voltage: 5
from Jiangyin Xinghuo Deyue Technology Co., Ltd.
CE;UL;UKCA [See More]
- Mounting / Configuration: Printed Circuit Board
- Current: 0.0 to 10
- Loop Type: Closed Loop
- Frequency Range: 20 to 20000
from LEM USA, Inc.
LEM products fall broadly into multiple areas of application and are used within general industry, automotive industry, for railway and trackside applications, energy measurement relating to railway on-board applications, energy & automation, battery monitoring, and in Wi-LEM - wireless... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Shenzhen Shengyu Electronics Technology Limited
IC CURRENT LIMITING 16TDFN [See More]
- Mounting / Configuration: Printed Circuit Board
- Operating Temperature: -40 to 185
- Current: 2.5
from Tamura Corporation of America
The magnetic flux created by the primary current (If) is balanced through a secondary coil using the magnetic probe device to provide a feedback and associated electronic circuitry to drive a compensating current in the secondary coil. The secondary (compensating) current is an exact (instantaneous)... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Closed Loop
- Technology: Flux Gate
from American Aerospace Controls, Inc.
Space flight; output 0 to +3.5V (Isolated); accuracy 2%FS; power +4.5 to +5.5Vdc; input current by in-line connection; response 1m-sec; temperature -55 ° to +85 °C; pcb mount; solder terminations [See More]
- Mounting / Configuration: Panel Mount; Printed Circuit Board
- Technology: Hall-Effect (optional feature)
- Current Type: DC Current
- Current: 0.0 to 10
from Honeywell Sensing & IoT
CSDA Series digital current sensors provide a logic level output that changes from the approximate Vcc to 0.4 V when the sensed current exceeds the operate point. Each digital sensor operates on ac or dc current; however, the output will turn off at every zero crossing when sensing AC current. [See More]
- Mounting / Configuration: Printed Circuit Board
- Voltage: 6 to 16
- Current Type: AC Current; DC Current
- Response Time: 100
from General Magnetics Corporation
Operating Frequency: 20 kHz. – 200 kHz. Ideal for SMPS Applications. Fully encapsulated. Conforms to UL94-V0. Conforms to RoHS Requirements. Rated load is that which results in 1 volt per amp output [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current
- Loop Type: Closed Loop
- Technology: Inductive
from Ohio Semitronics, Inc.
OSI manufactures current sensors that are closed loop, highly-precise, and designed for AC, DC, pulse, and variable-frequency drives. We invite you to chat live with our application and product specialists to find or create a solution that works best for your application. [See More]
- Mounting / Configuration: Panel Mount; Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Closed Loop
- Technology: Hall-Effect
from KEMET Electronics Corporation
The C/CT-1216 clamp-on current sensor can be used to measure currents in live wires. Applications. Typical applications include EMS current measurement, high performance distributions boards, power conditioners, power monitoring systems, inverters and industrial machineries. [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current
- Loop Type: Open Loop
- Technology: Inductive
from Jiangyin Xinghuo Deyue Technology Co., Ltd.
CE;UL;UKCA [See More]
- Mounting / Configuration: Printed Circuit Board
- Current: 0.0 to 10
- Loop Type: Closed Loop
- Frequency Range: 20 to 20000
from Shenzhen Shengyu Electronics Technology Limited
IC CURRENT SWITCH 3DFN [See More]
- Mounting / Configuration: Printed Circuit Board
- Operating Temperature: -40 to 185
- Current: 0.2000
from Tamura Corporation of America
• Excellent accuracy. • Very good linearity. • Low temperature drift. • Wide frequency bandwidth. • No insertion loss. • High Immunity To External Interference. • Optimised response time. • Current overload capability [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Honeywell Sensing & IoT
CSDA Series digital current sensors provide a logic level output that changes from the approximate Vcc to 0.4 V when the sensed current exceeds the operate point. Each digital sensor operates on ac or dc current; however, the output will turn off at every zero crossing when sensing AC current. [See More]
- Mounting / Configuration: Printed Circuit Board
- Voltage: 6 to 16
- Current Type: AC Current; DC Current
- Response Time: 100
from General Magnetics Corporation
In 1985, an engineer at Amecon inc. had the bright idea that increasing turns in a current transformer results in a smaller CT size and smaller secondary currents. This makes the CT suitable for use in electronic circuits. Despite reservations from the management who argued that the world was not... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current
- Loop Type: Closed Loop
- Technology: Inductive
from KEMET Electronics Corporation
The CT Series Low Alternating Current Sensors can be used to detect very low current levels and for overcurrent protection in electronic appliances. Applications. Typical applications include overcurrent detection in microcontroller-based equipment, refrigerators, air conditioners, inductive... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current
- Loop Type: Open Loop
- Technology: Inductive
from Shenzhen Shengyu Electronics Technology Limited
IC CURRENT SWITCH SOT23-3 TR 3K [See More]
- Mounting / Configuration: Printed Circuit Board
- Operating Temperature: -40 to 185
- Current: 0.2000
from Tamura Corporation of America
• Excellent accuracy. • Very good linearity. • Low temperature drift. • Wide frequency bandwidth. • No insertion loss. • High Immunity To External Interference. • Optimised response time. • Current overload capability [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Honeywell Sensing & IoT
CSDA Series digital current sensors provide a logic level output that changes from the approximate Vcc to 0.4 V when the sensed current exceeds the operate point. Each digital sensor operates on ac or dc current; however, the output will turn off at every zero crossing when sensing AC current. [See More]
- Mounting / Configuration: Printed Circuit Board
- Voltage: 6 to 16
- Current Type: AC Current; DC Current
- Response Time: 100
from Shenzhen Shengyu Electronics Technology Limited
IC CURRENT SWITCH SC59-3 [See More]
- Mounting / Configuration: Printed Circuit Board
- Operating Temperature: -40 to 185
- Current: 0.2000
from Tamura Corporation of America
• Excellent accuracy. • Very good linearity. • Low temperature drift. • Wide frequency bandwidth. • No insertion loss. • High Immunity To External Interference. • Optimised response time. • Current overload capability [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Honeywell Sensing & IoT
CSL Series inductive analog current sensors incorporate the SS490 Series linear Hall-effect sensor ICs. The sensing element is encapsulated in a printed circuit board-mountable plastic package. The combination of sensor and flux collector comprises the current sensor assembly. These sensors are... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Shenzhen Shengyu Electronics Technology Limited
IC CURRENT SOURCE SOT143R [See More]
- Mounting / Configuration: Printed Circuit Board
- Current: 0.0600
from Tamura Corporation of America
• Excellent accuracy. • Very good linearity. • Low temperature drift. • Wide frequency bandwidth. • No insertion loss. • High Immunity To External Interference. • Optimised response time. • Current overload capability [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Honeywell Sensing & IoT
CSL Series inductive analog current sensors incorporate the SS490 Series linear Hall-effect sensor ICs. The sensing element is encapsulated in a printed circuit board-mountable plastic package. The combination of sensor and flux collector comprises the current sensor assembly. These sensors are... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Shenzhen Shengyu Electronics Technology Limited
IC CURRENT MONITOR 2% SC70-6 [See More]
- Mounting / Configuration: Printed Circuit Board
- Operating Temperature: -40 to 221
from Tamura Corporation of America
• Excellent accuracy. • Very good linearity. • Low temperature drift. • Wide frequency bandwidth. • No insertion loss. • High Immunity To External Interference. • Optimised response time. • Current overload capability [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Honeywell Sensing & IoT
CSL Series in-circuit analog current sensors incorporate the SS490 Series linear Hall-effect sensor ICs. The sensing element is encapsulated in a printed circuit board-mountable plastic package. The combination of sensor and flux collector comprises the current sensor assembly. These sensors are... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Shenzhen Shengyu Electronics Technology Limited
IC CURRENT MIRROR 8TDFN [See More]
- Mounting / Configuration: Printed Circuit Board
- Operating Temperature: -40 to 185
- Current: 0.0700
from Tamura Corporation of America
• Excellent accuracy. • Very good linearity. • Low temperature drift. • Wide frequency bandwidth. • No insertion loss. • High Immunity To External Interference. • Optimised response time. • Current overload capability [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Honeywell Sensing & IoT
CSL Series in-circuit analog current sensors incorporate the SS490 Series linear Hall-effect sensor ICs. The sensing element is encapsulated in a printed circuit board-mountable plastic package. The combination of sensor and flux collector comprises the current sensor assembly. These sensors are... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Shenzhen Shengyu Electronics Technology Limited
IC CURRENT LIMITING DPAK [See More]
- Mounting / Configuration: Printed Circuit Board
- Operating Temperature: -67 to 302
- Current: 0.1000
from Tamura Corporation of America
• Excellent accuracy. • Very good linearity. • Low temperature drift. • Wide frequency bandwidth. • No insertion loss. • High Immunity To External Interference. • Optimised response time. • Current overload capability [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Honeywell Sensing & IoT
CSL Series in-circuit analog current sensors incorporate the SS490 Series linear Hall-effect sensor ICs. The sensing element is encapsulated in a printed circuit board-mountable plastic package. The combination of sensor and flux collector comprises the current sensor assembly. These sensors are... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Shenzhen Shengyu Electronics Technology Limited
IC CURRENT REGULATOR 15% TO252 [See More]
- Mounting / Configuration: Printed Circuit Board
- Operating Temperature: -40 to 185
- Current: 0.0200
from Tamura Corporation of America
• Excellent accuracy. • Very good linearity. • Low temperature drift. • Wide frequency bandwidth. • No insertion loss. • High Immunity To External Interference. • Optimised response time. • Current overload capability [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Honeywell Sensing & IoT
CSL Series in-circuit analog current sensors incorporate the SS490 Series linear Hall-effect sensor ICs. The sensing element is encapsulated in a printed circuit board-mountable plastic package. The combination of sensor and flux collector comprises the current sensor assembly. These sensors are... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Shenzhen Shengyu Electronics Technology Limited
IC CURRENT REGULATOR 15% SOT223 [See More]
- Mounting / Configuration: Printed Circuit Board
- Operating Temperature: -40 to 185
- Current: 0.0200
from Tamura Corporation of America
• Excellent accuracy. • Very good linearity. • Low temperature drift. • Wide frequency bandwidth. • No insertion loss. • High Immunity To External Interference. • Optimised response time. • Current overload capability [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Honeywell Sensing & IoT
CSLA Series inductive analog current sensors incorporate SS490 Series linear Hall-effect sensor ICs. The sensing element is assembled in a printed circuit board mountable housing. This housing is available in four configurations. Normal mounting is with 0.375 inch 4-40 screw and square nut (not... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Shenzhen Shengyu Electronics Technology Limited
IC CURRENT REGULATOR TO252 [See More]
- Mounting / Configuration: Printed Circuit Board
- Operating Temperature: -40 to 257
- Current: 0.0200
from Tamura Corporation of America
L18P***S05R Series. Hall Effect Current Sensors. Features: Open Loop type. Printed circuit board mounting. Integrated primary. Unipolar power supply. Busbar version from 40A to 60A. Insulated plastic case according to UL94V0. Regulated offset voltage. Advantages: Excellent accuracy and linearity. [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Honeywell Sensing & IoT
CSLA Series inductive analog current sensors incorporate SS490 Series linear Hall-effect sensor ICs. The sensing element is assembled in a printed circuit board mountable housing. This housing is available in four configurations. Normal mounting is with 0.375 inch 4-40 screw and square nut (not... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Shenzhen Shengyu Electronics Technology Limited
IC CURRENT REGULATOR 15% TO252 [See More]
- Mounting / Configuration: Printed Circuit Board
- Operating Temperature: -40 to 185
- Current: 0.0200
from Tamura Corporation of America
• Excellent accuracy. • Very good linearity. • Low temperature drift. • Wide frequency bandwidth. • No insertion loss. • High Immunity To External Interference. • Optimised response time. • Current overload capability [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Honeywell Sensing & IoT
CSLA Series inductive analog current sensors incorporate SS490 Series linear Hall-effect sensor ICs. The sensing element is assembled in a printed circuit board mountable housing. This housing is available in four configurations. Normal mounting is with 0.375 inch 4-40 screw and square nut (not... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Shenzhen Shengyu Electronics Technology Limited
IC CURRENT REGULATOR 15% SOT223 [See More]
- Mounting / Configuration: Printed Circuit Board
- Operating Temperature: -40 to 185
- Current: 0.0200
from Tamura Corporation of America
L31S***S05 Series. Hall Effect Current Sensors. Features: Open Loop type. Printed circuit board mounting. Unipolar power supply. Industrial temperature range. Sulfur-proof version available (add "S " suffix to part number). Mounting pins. Insulated plastic case according to UL94V0. [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Honeywell Sensing & IoT
CSLA Series inductive analog current sensors incorporate SS490 Series linear Hall-effect sensor ICs. The sensing element is assembled in a printed circuit board mountable housing. This housing is available in four configurations. Normal mounting is with 0.375 inch 4-40 screw and square nut (not... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Shenzhen Shengyu Electronics Technology Limited
IC CURRENT REGULATOR DO214AC [See More]
- Mounting / Configuration: Printed Circuit Board
- Operating Temperature: -67 to 302
- Current: 0.0200
from Tamura Corporation of America
• Excellent accuracy. • Very good linearity. • Low temperature drift. • Wide frequency bandwidth. • No insertion loss. • High Immunity To External Interference. • Optimised response time. • Current overload capability [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Closed Loop
- Technology: Hall-Effect
from Honeywell Sensing & IoT
CSLA Series inductive analog current sensors incorporate SS490 Series linear Hall-effect sensor ICs. The sensing element is assembled in a printed circuit board mountable housing. This housing is available in four configurations. Normal mounting is with 0.375 inch 4-40 screw and square nut (not... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Shenzhen Shengyu Electronics Technology Limited
IC CURRENT REGULATOR DO214AA [See More]
- Mounting / Configuration: Printed Circuit Board
- Operating Temperature: -67 to 302
- Current: 0.0200
from Tamura Corporation of America
• Excellent accuracy. • Very good linearity. • Low temperature drift. • Wide frequency bandwidth. • No insertion loss. • High Immunity To External Interference. • Optimised response time. • Current overload capability [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Closed Loop
- Technology: Hall-Effect
from Honeywell Sensing & IoT
CSLA Series inductive analog current sensors incorporate SS490 Series linear Hall-effect sensor ICs. The sensing element is assembled in a printed circuit board mountable housing. This housing is available in four configurations. Normal mounting is with 0.375 inch 4-40 screw and square nut (not... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Shenzhen Shengyu Electronics Technology Limited
IC CURRENT LIMITING SOT23-8L [See More]
- Mounting / Configuration: Printed Circuit Board
- Operating Temperature: -22 to 257
- Current: 0.0040
from Tamura Corporation of America
• Excellent accuracy. • Very good linearity. • Low temperature drift. • Wide frequency bandwidth. • No insertion loss. • High Immunity To External Interference. • Optimised response time. • Current overload capability [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Closed Loop
- Technology: Hall-Effect
from Honeywell Sensing & IoT
CSLA Series inductive analog current sensors incorporate SS490 Series linear Hall-effect sensor ICs. The sensing element is assembled in a printed circuit board mountable housing. This housing is available in four configurations. Normal mounting is with 0.375 inch 4-40 screw and square nut (not... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Shenzhen Shengyu Electronics Technology Limited
IC CURRENT LIMITING 16QFN [See More]
- Mounting / Configuration: Printed Circuit Board
- Operating Temperature: -22 to 257
- Current: 0.0040
from Tamura Corporation of America
• Excellent accuracy. • Very good linearity. • Low temperature drift. • Wide frequency bandwidth. • No insertion loss. • High Immunity To External Interference. • Optimised response time. • Current overload capability [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Closed Loop
- Technology: Hall-Effect
from Honeywell Sensing & IoT
CSLA Series inductive analog current sensors incorporate SS490 Series linear Hall-effect sensor ICs. The sensing element is assembled in a printed circuit board mountable housing. This housing is available in four configurations. Normal mounting is with 0.375 inch 4-40 screw and square nut (not... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Shenzhen Shengyu Electronics Technology Limited
IC CURRENT LIMITING DFN123F [See More]
- Mounting / Configuration: Printed Circuit Board
- Operating Temperature: -85 to 302
- Current: 0.0800
from Tamura Corporation of America
• Excellent accuracy. • Very good linearity. • Low temperature drift. • Wide frequency bandwidth. • No insertion loss. • High Immunity To External Interference. • Optimised response time. • Current overload capability [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Closed Loop
- Technology: Hall-Effect
from Honeywell Sensing & IoT
CSLA Series inductive analog current sensors incorporate SS490 Series linear Hall-effect sensor ICs. The sensing element is assembled in a printed circuit board mountable housing. This housing is available in four configurations. Normal mounting is with 0.375 inch 4-40 screw and square nut (not... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Shenzhen Shengyu Electronics Technology Limited
IC CURRENT SENSE 0.2% 6MICROPAK [See More]
- Mounting / Configuration: Printed Circuit Board
- Operating Temperature: -40 to 185
- Current: 0.0100
from Tamura Corporation of America
• Excellent accuracy. • Very good linearity. • Low temperature drift. • Wide frequency bandwidth. • No insertion loss. • High Immunity To External Interference. • Optimised response time. • Current overload capability [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Closed Loop
- Technology: Hall-Effect
from Honeywell Sensing & IoT
CSLA Series inductive analog current sensors incorporate SS490 Series linear Hall-effect sensor ICs. The sensing element is assembled in a printed circuit board mountable housing. This housing is available in four configurations. Normal mounting is with 0.375 inch 4-40 screw and square nut (not... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Shenzhen Shengyu Electronics Technology Limited
IC CURRENT SOURCE 8SO [See More]
- Mounting / Configuration: Printed Circuit Board
- Operating Temperature: -40 to 185
- Current: 1
from Tamura Corporation of America
• Excellent accuracy and linearity. • Low temperature drift. • Wide frequency bandwidth. • No insertion loss. • High Immunity to external interferences. • Optimised response time. • Current overload capability [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Closed Loop
- Technology: Hall-Effect
from Honeywell Sensing & IoT
CSLA Series inductive analog current sensors incorporate SS490 Series linear Hall-effect sensor ICs. The sensing element is assembled in a printed circuit board mountable housing. This housing is available in four configurations. Normal mounting is with 0.375 inch 4-40 screw and square nut (not... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Shenzhen Shengyu Electronics Technology Limited
IC CURRENT MONITOR 0.5% SOT23-5 [See More]
- Mounting / Configuration: Printed Circuit Board
- Operating Temperature: -40 to 257
from Tamura Corporation of America
• Excellent accuracy. • Very good linearity. • Low temperature drift. • Wide frequency bandwidth. • No insertion loss. • High Immunity To External Interference. • Optimised response time. • Current overload capability [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Closed Loop
- Technology: Hall-Effect
from Honeywell Sensing & IoT
CSLA Series inductive analog current sensors incorporate SS490 Series linear Hall-effect sensor ICs. The sensing element is assembled in a printed circuit board mountable housing. This housing is available in four configurations. Normal mounting is with 0.375 inch 4-40 screw and square nut (not... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Shenzhen Shengyu Electronics Technology Limited
IC CURRENT MONITOR 0.5% 8TSSOP [See More]
- Mounting / Configuration: Printed Circuit Board
- Operating Temperature: -40 to 257
from Honeywell Sensing & IoT
CSLA Series inductive analog current sensors incorporate SS490 Series linear Hall-effect sensor ICs. The sensing element is assembled in a printed circuit board mountable housing. This housing is available in four configurations. Normal mounting is with 0.375 inch 4-40 screw and square nut (not... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Shenzhen Shengyu Electronics Technology Limited
IC CURRENT MONITOR 0.5% 8VSSOP [See More]
- Mounting / Configuration: Printed Circuit Board
- Operating Temperature: -40 to 185
from Honeywell Sensing & IoT
CSLA Series inductive analog current sensors incorporate SS490 Series linear Hall-effect sensor ICs. The sensing element is assembled in a printed circuit board mountable housing. This housing is available in four configurations. Normal mounting is with 0.375 inch 4-40 screw and square nut (not... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Shenzhen Shengyu Electronics Technology Limited
PROTOTYPE [See More]
- Mounting / Configuration: Printed Circuit Board
- Operating Temperature: -40 to 257
from Honeywell Sensing & IoT
CSLA Series inductive analog current sensors incorporate SS490 Series linear Hall-effect sensor ICs. The sensing element is assembled in a printed circuit board mountable housing. This housing is available in four configurations. Normal mounting is with 0.375 inch 4-40 screw and square nut (not... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect
from Shenzhen Shengyu Electronics Technology Limited
IC CURRENT SENSE 1.5% 10UQFN [See More]
- Mounting / Configuration: Printed Circuit Board
- Operating Temperature: -40 to 257
from Honeywell Sensing & IoT
CSLA Series inductive analog current sensors incorporate SS490 Series linear Hall-effect sensor ICs. The sensing element is assembled in a printed circuit board mountable housing. This housing is available in four configurations. Normal mounting is with 0.375 inch 4-40 screw and square nut (not... [See More]
- Mounting / Configuration: Printed Circuit Board
- Current Type: AC Current; DC Current
- Loop Type: Open Loop
- Technology: Hall-Effect