Drying Radiant Heaters
from Gaumer Process
Type GAD Radiant Heaters are suitable for drying, baking, curing, sterilizing, and many other applications requiring contact-free heating. Long wave length is suitable for most colors. [See More]
- Applications: Curing or Tempering; Drying; Sterilizing
- Fuel / Energy Source: Electric
from Excelitas Technologies Corp.
The Noblelight Infradry® Protec was developed for processes in extreme environments, such as with solvent-containing material. The adjustable wavelength and flexible module length and width enable its best drying result. The use accelerates heating and reduces energy consumption at the same time. [See More]
- Applications: Drying
- Fuel / Energy Source: Electric
from Solaronics, Inc.
Solaronics Compact Tube Heater is the world's most versatile gas infrared heater. Installs quickly, just hang and connect. Saves up to 75% in energy costs. All-Weather gas infrared heater use Outdoors or Indoors. Fits standard 2' x 4' ceiling panel grids. Applications. Restaurant Patios. Car Washes. [See More]
- Applications: Drying
- AC Voltage Required: 120
- Heater Type: Radiant Reflective Process Heater
- Watts: 8.21 to 8.79
from Detroit Radiant Products Company
Mounts in any position, pollution free; no venting required [See More]
- Applications: Drying; OEM / Custom
- AC Voltage Required: 120
- Heater Type: Radiant Reflective Process Heater
- Watts: 0.50
from OMEGA Engineering, Inc.
OMEGALUX ® QG Series heaters use a solid black Ceran ™ glass as the emitter face. Maximum power output is 20 Watts/square inch with a maximum operating temperature of 870 °C (1600 °F) on the face. An optional thermowell from the back of the heater allows for a spring-loaded... [See More]
- Applications: Drying; Paint Dry, Plastic Forming, Wave Solder
- Maximum Operating (Sheath) Temperature: 1600
- Heater Type: Radiant Flat Panel Heater
- AC Voltage Required: 120 to 480
from Glenro Inc.
Proven Performance. Uniform Heat Energy Output. Large Heated Areas = No Hot or Cold Spots. Insulated Construction = Minimal Heat Loss. Self-Cleaning Ceramic Face. Reflector Free = Low Maintenance. Repairable. Output Power & Temperature Controllable. Standard Platform. RADPLANE ® Series 36... [See More]
- Applications: Annealing or Heat Treating; Curing or Tempering; Drying; Dry/Cure Coatings & Adhesives on Paper/Fabric, Gel/Fuse/Anneal Vinyl, Dry Coating on Parts, B-Stage/Cure Phenolic Resin Impregnated Paper/Fabric
- Maximum Operating (Sheath) Temperature: 400 to 1500
- Heater Type: Radiant Flat Panel Heater
- AC Voltage Required: 115 to 575
from Chromalox
1.83 kW/Ft ². 0.4 - 4.5kW. 120, 208, 240 and 480 Volt. 3/8" Dia. INCOLOY ® Sheath Elements (Type RTU). 1500 °F Max. Sheath Temp. [See More]
- Applications: Curing or Tempering; Drying; Plastics Processing, Ink Drying, Textile and Non-Woven Fabric Manufacturing, Paper and Paperboard Manufacturing, Food Processing, Ceramic Drying
- Maximum Operating (Sheath) Temperature: 1500
- Heater Type: Radiant Reflective Process Heater
- AC Voltage Required: 120 to 480
from Wacker Neuson SE
Infrared radiant heaters direct heat exactly where you need it without relying on warming the surrounding air, unlike convective heat, making it unaffected by the wind or weather. Perfect for heating open workspaces, personnel, equipment, concrete formwork, or jobsite structures, radiant heaters... [See More]
- Applications: Curing or Tempering; Drying
- AC Voltage Required: 120
- Heater Type: Radiant Flat Panel Heater
- Watts: 33.71 to 45.43
from Aitken Products, Inc.
For Drying, Baking, and Curing. Aitken Infrared Process Modules are designed primarily as process heaters and are not intended for people or comfort heating. Maximum operating ambient temperature of 350 degrees F. Higher object temperatures can be achieved. Process Modules. Metal sheath heaters... [See More]
- Applications: Curing or Tempering; Drying
- Maximum Operating (Sheath) Temperature: 1450
- Heater Type: Radiant Reflective Process Heater
- AC Voltage Required: 120 to 480
from Solaronics, Inc.
Solaronics Gas-Fired High-Intensity Infrared Heaters provide instant heat on demand reaching temperature in less than a minute. Save up to 75% in energy costs. Excellent for space and spot heating in commercial and industrial buildings. Two-stage models available. Applications. Loading Docks. [See More]
- Applications: Drying
- Watts: 8.79 to 58.62
- Heater Type: Radiant Flat Panel Heater
- Fuel / Energy Source: Natural Gas / Propane
from OMEGA Engineering, Inc.
OMEGALUX ® QH and QC Series quartz infrared radiant panel heaters have the most powerful power output of any infrared panel heater available. They use a fused quartz glass face that is grooved to provide coil support. The QC series uses a 98% pure fused quartz and the QH series uses a 99% pure... [See More]
- Applications: Drying; Glass Processing, Thermoforming
- Maximum Operating (Sheath) Temperature: 1800
- Heater Type: Radiant Flat Panel Heater
- AC Voltage Required: 240 to 480
from Glenro Inc.
Proven Performance. Uniform Heat Energy Output. Rapid Response. Compact Design & High-Powered. Horizontal or Vertical Orientation. Energy Efficient Insulated Construction. Output Power & Temperature Controllable. Standard Platform. High Temperature Heat Tunnel Standard Specifications. Heater... [See More]
- Applications: Drying; Dry Printing & Coatings on Narrow Fabrics, Heat Set Narrow Fabrics, Dry Label Stock Adhesives, Heat Fiber Tows, Dry Coatings on Narrow Metal Strip
- AC Voltage Required: 208 to 575
- Maximum Operating (Sheath) Temperature: 400 to 1700
- Watts: 12.00 to 27.00
from Chromalox
3.66 kW/Ft ². 1.6 - 7.83 kW. 120, 208, 240, 275 and 480 Volt. 3/8" Dia. INCOLOY ® Sheath Elements (Type UTU). 1500 °F Max. Sheath Temp. [See More]
- Applications: Curing or Tempering; Drying; Vinyl Fusing, Preheat Roll Fed Plastics for Laminating or Embossing
- Maximum Operating (Sheath) Temperature: 1500
- Heater Type: Radiant Reflective Process Heater
- AC Voltage Required: 120 to 480
from Solaronics, Inc.
Solaronics Suntube IV GQ Standard-Duty Gas-Fired Infrared Radiant Tube Heaters are proven single-stage heaters in the Global Quality Series. Save up to 75% in energy costs. Aluminized steel heat exchangers resist corrosion. Models available with gas inputs from 40,000 to 200,000 BTU/hour. [See More]
- Applications: Drying
- AC Voltage Required: 120
- Heater Type: Radiant Reflective Process Heater
- Watts: 11.72 to 58.62
from OMEGA Engineering, Inc.
OMEGALUX ® QF Series heaters are very popular infrared panel heaters used in a wide variety of applications. The QF series panel heaters ’ radiant surface is constructed through a patented process using bonded high temperature cloth quartz. A black coating is applied to the face of the... [See More]
- Applications: Drying; Paint Dry, Plastic Forming, Wave Solder
- Maximum Operating (Sheath) Temperature: 1600
- Heater Type: Radiant Flat Panel Heater
- AC Voltage Required: 120 to 480
from Glenro Inc.
Proven Performance. Uniform Heat Energy Output. Rapid Response. Compact Design & High-Powered. Horizontal or Vertical Orientation. Energy Efficient Insulated Construction. Output Power & Temperature Controllable. Standard Platform. Narrow Heat Tunnel Standard Specifications. Heater Series:... [See More]
- Applications: Drying; Dry Printing & Coatings on Narrow Fabrics, Heat Set Narrow Fabrics, Dry Label Stock Adhesives, Heat Fiber Tows, Dry Coatings on Narrow Metal Strip
- AC Voltage Required: 480
- Maximum Operating (Sheath) Temperature: 400 to 1500
- Watts: 8.00 to 16.00
from Chromalox
3.66 kW/Ft ². 0.8 - 3.6 kW. 120, 208, 240, 275 and 480 Volt. 3/8" Dia. INCOLOY ® Sheath. 1500 °F Max. Sheath Temp. [See More]
- Applications: Drying; Roll Heating, Shrink Fitting, Preheat Glass for Polishing, Drying, Sterilizing, Fast-Moving Webs
- Maximum Operating (Sheath) Temperature: 1500
- Heater Type: Radiant Reflective Process Heater
- AC Voltage Required: 120 to 480
from Solaronics, Inc.
Solaronics Suntube IV Stainless Steel Gas-Fired Infrared Radiant Tube Heaters are proven single-stage heaters for wet, humid and corrosive environments. Save up to 75% in energy costs. 304L stainless-steel combustion chamber and heat exchangers resist corrosion. Applications. Car Washes. [See More]
- Applications: Drying
- AC Voltage Required: 120
- Heater Type: Radiant Reflective Process Heater
- Watts: 11.72 to 58.62
from OMEGA Engineering, Inc.
•. 0.40 to 13.0 kW. •. 120, 208, 240, 480V. •. 1500 °F max. Sheath Temperature. •. 3/8" Diameter Incoloy Sheath. •. RAD Series (Single Fixed Elements) 1.83 kW/Sq. Ft. •. RADD Series (Two Fixed Elements) 3.66 kW/Sq. Ft. [See More]
- Applications: Curing or Tempering; Drying; Textiles, Non-woven Fabric, Ceramics
- Maximum Operating (Sheath) Temperature: 1500
- Heater Type: Radiant Reflective Process Heater
- AC Voltage Required: 120 to 480
from Glenro Inc.
Proven Performance. Uniform Heat Energy Output. Rapid Response Ceramic Fiber Matrix. Natural Gas or Propane Direct Fired. High Watt Density = More Work in Less Space. Horizontal or Vertical Orientation. Insulated & Air Cooled Constructions Available. Output Power & Temperature Controllable. [See More]
- Applications: Drying; Dry/Cure Coatings & Adhesives on Paper/Fabric, Gel/Fuse/Anneal Vinyl, Dry Coating on Parts, B-Stage/Cure Phenolic Resin Impregnated Paper/Fabric
- Maximum Operating (Sheath) Temperature: 1600
- Heater Type: Radiant Flat Panel Heater
- AC Voltage Required: 115 to 575
from Chromalox
3.66kW/Ft ². 3.2 - 15.03 kW. 120, 240 and 480 Volt. 3/8" Dia. INCOLOY ® Sheath Elements (Type UTU). 1500 °F Max. Sheath Temp. [See More]
- Applications: Curing or Tempering; Drying; Vinyl Fusing, Preheat Roll Fed Plastics for Laminating or Embossing, Web Heating Where Sizes Vary in Width, Web Heating
- Maximum Operating (Sheath) Temperature: 1500
- Heater Type: Radiant Reflective Process Heater
- AC Voltage Required: 120 to 480
from Solaronics, Inc.
Solaronics Suntube IV Versamount Heavy Duty Gas-Fired Infrared Radiant Tube Heaters are proven single-stage heaters. Save up to 75% in energy costs. 12 gauge black steel heat exchangers provide heat transfer efficiency, long system life and are twice the thickness of industry norm. Applications. [See More]
- Applications: Drying
- AC Voltage Required: 120
- Heater Type: Radiant Reflective Process Heater
- Watts: 11.72 to 58.62
from Glenro Inc.
Proven Performance. Uniform Heat Energy Output. Fast Heat Up & Cool Down = Product Protection. Integrate with Process Air. Insulated Construction = Minimal Heat Loss. Reflector Free = Low Maintenance. Repairable. Output Power & Temperature Controllable. Standard Platform. RADPLANE ®... [See More]
- Applications: Curing or Tempering; Drying; Predry/Dry/Heatset Textile Goods, Preheat Polymer Films Prior to Embossing, Gel/Fuse PVC Films, Coated Fabrics & Carpet Backings
- Maximum Operating (Sheath) Temperature: 400 to 1500
- Heater Type: Radiant Flat Panel Heater
- AC Voltage Required: 115 to 575
from Chromalox
40 W/In ². 1.6 - 4.8 kW. 240 and 480 Volt. 1 and 3 Phase. 1750 °F Max. Emitter Temp. 10" Long x 4 - 12" ide [See More]
- Applications: Curing or Tempering; Drying; Moisture Removal from Bottles, Cans and Components, Drying Automobile Underseal, Adhesives, Lacquer, Printing Ink
- Maximum Operating (Sheath) Temperature: 1750
- Heater Type: Radiant Flat Panel Heater
- AC Voltage Required: 240 to 480
from Solaronics, Inc.
Solaronics True Dual Aluminized Two-Stage Gas-Fired Infrared Radiant Tube Heaters provide precise air to gas ratios at both the high- and low-heat stages for optimum efficiency. Save up to 75% in energy costs. Aluminized steel heat exchangers resist corrosion. Applications. Maintenance Facilities. [See More]
- Applications: Drying
- AC Voltage Required: 120
- Heater Type: Radiant Reflective Process Heater
- Watts: 19.05 to 58.62
from Glenro Inc.
Proven Performance. Uniform Heat Energy Surrounds Product. High Operating Efficiency = Low Operating Cost. Insulated Construction = Minimal Heat Loss. Reflector Free = Low Maintenance. Clean, Durable, Long Lasting Construction. Output Power & Temperature Controllable. Standard Platform [See More]
- Applications: Curing or Tempering; Drying; Dry/Cure Extruded PTFE Medical Tubing, Industrial Tubing & Hose, Cure Extruded Silicone Rubber Medical Tubing
- AC Voltage Required: 208 to 575
- Maximum Operating (Sheath) Temperature: 400 to 1600
- Fuel / Energy Source: Electric
from Chromalox
5 - 25 W/In ². 0.55 - 1.8 kW. 120, 230, 240 and 480 Volt. 1 and 3 Phase. 1650 °F Max. Emitter Temp. 6 - 60" Long x 12 - 30" Wide [See More]
- Applications: Annealing or Heat Treating; Curing or Tempering; Drying; Ink Drying and Spot Curing for Printing and Silk Screening, Food Warming, Moisture Removal in Food Processing, Plastics Annealing
- Maximum Operating (Sheath) Temperature: 1750
- Heater Type: Radiant Flat Panel Heater
- AC Voltage Required: 120 to 480
from Chromalox
5 - 25 W/In ². 0.55 - 1.8 kW. 120, 230, 240 and 480 Volt. 1 and 3 Phase. 1650 °F Max. Emitter Temp. 6 - 60" Long x 12 - 30" Wide [See More]
- Applications: Annealing or Heat Treating; Curing or Tempering; Drying; Ink Drying and Spot Curing for Printing and Silk Screening, Food Warming, Moisture Removal in Food Processing, Plastics Annealing
- Maximum Operating (Sheath) Temperature: 1650
- Heater Type: Radiant Flat Panel Heater
- AC Voltage Required: 120 to 480