Flame Retardant (e.g. UL 94 Rated) Casting Resins
from ELANTAS North America LLC
ELANTAS PDG, Inc., founded in 1919 and based in St. Louis, Missouri, is a premier global supplier of specialty resins for applications in the electrical and electronic industries. ELANTAS Electrical Insulation companies are respected as the market leaders in the development and manufacturing of wire... [See More]
- Features: Flame Retardant; UL
- Chemical System: Epoxy
- Type: Thermally cured
- Filler: Mineral or Inorganic
from Hapco, Inc.
Flexible, 45, 65 and, 95 shore A hardness, potting and encapsulating systems. Flame retardant (FR), accelerated 3 minute (-3) gel time, and black or unpigmented versions are available. [See More]
- Features: Flame Retardant
- Filler: Unfilled
- Type: Thermally cured
- Industry: Electronics
from Techsil Limited
F-164 FR REV1 is a castable polyurethane elastomer containing fire retardants that will meet a UL 94V-2 Rating. This grade is useful in applications where a tough, 60 Shore A rubber with self-extinguishing properties is required. RoHS and REACH compliant F-164 is ideal for special effects and the... [See More]
- Features: Flame Retardant
- Chemical System: Polyurethane
from Hapco, Inc.
Flexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Available in flame retardant (FR), 3 minute (-3) gel time, and in black or unpigmented. [See More]
- Features: Flame Retardant
- Filler: Unfilled
- Type: Thermally cured
- Industry: Electronics
from Techsil Limited
F 164 FR Rev is a castable polyurethane elastomer containing fire retardants that will meet a UL 942V-2 rating. F164 is a member of the 'F-1' Series, a family of flexible polyurethane elastomers that range in hardness from 5 Shore A up to 95 Shore A. All grades found in the range boast much higher... [See More]
- Features: Flame Retardant
- Chemical System: Polyurethane
from Hapco, Inc.
Easily pourable, thermally conductive, shock resistant potting compounds that are ideally suited for low and high production applications. This series of DI-PAK products reduce rejects by exhibiting extremely low stress on potted components. All three of the above DI-PAK E products are flame... [See More]
- Features: Flame Retardant; UL; Thermally Conductive
- Filler: Unfilled
- Type: Thermally cured
- Industry: Electronics
from Techsil Limited
BJB M3184 FR (Rev1) is a castable polyurethane elastomer which contains fire retardants that meet a UL94V-2 rating. A tough 80 shore A rubber with self-extinguishing properties ideal for prototyping and production applications, along with vibration dampening, over molding, strain relief applications... [See More]
- Features: Flame Retardant
- Chemical System: Polyurethane
from Hapco, Inc.
DI-COAT R-4721 / DI-COAT R-4721 LV (lower viscosity). Shore 90 D, room temperature curing, medium to high thixotropic coating for dielectric insulating applications. DI-COAT R-4721 is ideal for use on vertical or sloping surfaces where flow or drain-off cannot be tolerated. DI-COAT R-4721 is easy to... [See More]
- Features: Flame Retardant
- Filler: Unfilled
- Type: Thermally cured
- Industry: Electronics
from Techsil Limited
BJB TC267 FR is a soft, 3 lb. water blown flexible foam with fire retardant properties. This product was developed due to the ongoing demand for fire retardant foams in the industries of movie special effects, theme parks, haunted houses and theatrical performance. Firmness of the foam can be... [See More]
- Features: Flame Retardant
- Chemical System: Polyurethane
from Hapco, Inc.
Filter-bond ™ is a series of casting and potting compounds ideally suited for potting, sealing, and bonding filtration and ultrafiltration products. The Filter-bond ™ E-Series is manufactured to ultra-high quality standards and has been used by customers to pass FDA approval. Filter-bond... [See More]
- Features: Flame Retardant
- Filler: Unfilled
- Type: Elastomer
- Industry: Sanitary
from Techsil Limited
BJB TC278 FR is a soft, 4 lb. water blown flexible foam with fire retardant properties. This product was developed due to the ongoing demand for fire retardant foams in the industries of movie special effects, theme parks, haunted houses and theatrical performance. Firmness of the foam can be... [See More]
- Features: Flame Retardant
- Chemical System: Polyurethane
from Hapco, Inc.
A series of flame retardant Liquid Molding Compounds with high physical properties. The tensile strength is 12,600 psi and flexural strength is 16,500 psi after post cure. This series is available in a 2, 4, 14, and 28 minute gel time. [See More]
- Features: Flame Retardant
- Industry: Tooling
- Filler: Unfilled
- Tensile (Break): 12600
from Techsil Limited
BJB TC296 FR is a 6 lb. medium density, water blown flexible foam with fire retardant properties. This product was developed due to the ongoing demand for fire retardant foams in the industries of movie special effects, theme parks, haunted houses and theatrical performance. Firmness of the foam can... [See More]
- Features: Flame Retardant
- Chemical System: Polyurethane
from Techsil Limited
BJB TC870 is a high impact fire retardant polyurethane system with remarkable heat deflection. Product Benefits. Non-mercury based catalyst system. High heat resistance. UL 94V-0 Listed. High impact. RoHS/REACH Compliant. Technical Properties. Work Time: 9 - 10 minutes. Demold Time: 3 - 4 hours. [See More]
- Features: Flame Retardant
- Chemical System: Polyurethane