Unfilled Casting Resins
from ELANTAS North America LLC
ELANTAS PDG, Inc., founded in 1919 and based in St. Louis, Missouri, is a premier global supplier of specialty resins for applications in the electrical and electronic industries. ELANTAS Electrical Insulation companies are respected as the market leaders in the development and manufacturing of wire... [See More]
- Filler: Unfilled
- Chemical System: Polyester or Alkyd
- Type: Thermally cured
- Features: UL
from Master Bond, Inc.
Master Bond Polymer System EP112 is a solventless, low viscosity two component cycloaliphatic epoxy resin system which is specifically designed for high performance outdoor and indoor electrical/electronic/ structural applications. The two components are combined in a convenient noncritical mix... [See More]
- Filler: Unfilled
- Chemical System: Epoxy
- Type: Thermally cured; Optical
- Industry: Electronics; Electrical Power or High Voltage; Optoelectronics or Photonics
from Master Bond, Inc.
Master Bond EP121CL is a two component, high performance epoxy resin system featuring high thermal stability, superior electrical insulation properties and outstanding dimensional stability for casting, sealing, potting, encapsulation and impregnation for service up to 450-500 °F. It cures... [See More]
- Filler: Unfilled
- Chemical System: Epoxy
- Type: Thermally cured
- Industry: Electronics; Electrical Power or High Voltage; Optoelectronics or Photonics
from Wacker Chemical Corp.
ELASTOSIL ® RT 601 A/B is a pourable, additioncuring RTV-2 silicone rubber. Special features. two-part, 9 : 1 mixing ratio. low viscosity. medium cured hardness. excellent tensile strength. crystal clear vulcanizate. Application. all-round potting compound - manufacture of molded articles by... [See More]
- Filler: Unfilled
- Chemical System: Silicone
- Type: Elastomer
- Industry: OEM or Industrial
from Hapco, Inc.
Castalloy ™ is a high performance casting resin that is water thin, economical, and easy to use. Easy to mix with a 1:1 ratio by volume. Extremely thin with a mixed viscosity of 120 cps. Has a natural, creamy, off-white color. Can be de-molded in less than 15 minutes!. Castalloy ™ has... [See More]
- Filler: Unfilled
- Viscosity: 120
- Industry: Tooling; Prototyping
from Nylatech, Inc.
Nylatech Nythane is chemically formulated copolymer designed to offer an engineering material with the High Tensile and Compressive properties of Cast Nylon, with the impact and wear resistance of polyurethane. Offered in 3 specific grades, Nylatech ® Nythane has proven successful for the most... [See More]
- Filler: Unfilled
- Chemical System: Polyamide
- Type: Thermoplastic
- Industry: OEM or Industrial
from Ravago Manufacturing Americas
The Ravago product line is available through our sister companies: Entec Channel Prime Alliance and Muehlstein RMA products include a broad portfolio of materials that are fabricated at our state-of-the-art, centrally located facilities. The product line delivers the highest quality compounds with... [See More]
- Filler: Unfilled
- Chemical System: Polycarbonate
- Type: Thermoplastic
- Tensile (Break): 9200
from Epoxy Technology
EPO-TEK ® medical grade (or biocompatible) epoxy adhesives are used extensively throughout the healthcare and biotech industries. Device manufacturers making cardiac, ophthalmic, skeletal and neurological implants rely on our adhesives for protection, while the endoscopy camera market... [See More]
- Filler: Unfilled
- Chemical System: Epoxy
- Type: Thermally cured; Optical
- Features: BioMedical
from Hapco, Inc.
Flexible, colorless, potting and encapsulating systems. Available in 5 minute (-5), 16 minute, and 20 minute gel times, and in shore hardness ’s from 20 A to 80 A . [See More]
- Filler: Unfilled
- Industry: Electronics
- Type: Thermally cured
- Use Temperature: 176
from Hapco, Inc.
Flexible, 45, 65 and, 95 shore A hardness, potting and encapsulating systems. Flame retardant (FR), accelerated 3 minute (-3) gel time, and black or unpigmented versions are available. [See More]
- Filler: Unfilled
- Features: Flame Retardant
- Type: Thermally cured
- Industry: Electronics
from Hapco, Inc.
Flexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Available in flame retardant (FR), 3 minute (-3) gel time, and in black or unpigmented. [See More]
- Filler: Unfilled
- Features: Flame Retardant
- Type: Thermally cured
- Industry: Electronics
from Hapco, Inc.
High performance, flexible potting systems designed to be in constant water immersion while maintaining electrical and physical properties. DI-PAK E-4888 & E-4889 were designed to meet Naval underwater applications. [See More]
- Filler: Unfilled
- Industry: Electronics
- Type: Thermally cured
- Use Temperature: 203
from Hapco, Inc.
Low cost, easy to use, potting compounds with fast cycle times. Available in 3 speeds. [See More]
- Filler: Unfilled
- Industry: Electronics
- Type: Thermally cured
- Use Temperature: 176
from Hapco, Inc.
DI-COAT R-4721 / DI-COAT R-4721 LV (lower viscosity). Shore 90 D, room temperature curing, medium to high thixotropic coating for dielectric insulating applications. DI-COAT R-4721 is ideal for use on vertical or sloping surfaces where flow or drain-off cannot be tolerated. DI-COAT R-4721 is easy to... [See More]
- Filler: Unfilled
- Industry: Electronics
- Type: Thermally cured
- Use Temperature: 298
from Hapco, Inc.
Filter-bond ™ is a series of casting and potting compounds ideally suited for potting, sealing, and bonding filtration and ultrafiltration products. The Filter-bond ™ E-Series is manufactured to ultra-high quality standards and has been used by customers to pass FDA approval. Filter-bond... [See More]
- Filler: Unfilled
- Features: Flame Retardant
- Type: Elastomer
- Industry: Sanitary
from Hapco, Inc.
HIGH PERFORMANCE HYBRID ELASTOMERIC POLYMER ALLOYS. The Hapflex ™ 1000 Series products are soft, colorless, Shore A elastomers. These materials are available in both a fast and slow gel time and can also be combined to yield customized gel times without the addition of heat. Hapflex ™... [See More]
- Filler: Unfilled
- Chemical System: Polyurethane
- Type: Elastomer
- Industry: Electronics; OEM or Industrial; Tooling
from Hapco, Inc.
HIGH PERFORMANCE HYBRID ELASTOMERIC POLYMER ALLOYS. The Hapflex ™ 500 Series offers soft durometer elastomers ranging from 45 - 95 Shore A. All are relatively fast, room curing, flexible systems that can be accelerated with moderate heat for faster cycle times. Most 500 Series products are... [See More]
- Filler: Unfilled
- Chemical System: Polyurethane
- Type: Elastomer
- Industry: OEM or Industrial; Tooling
from Hapco, Inc.
HIGH PERFORMANCE HYBRID ELASTOMERIC POLYMER ALLOYS. The Hapflex ™ 600 series are relatively fast, semi-rigid, room temperature curing systems. This series yields harder durometers ranging from 50 - 70 Shore D. Most. 600 Series products are offered in 2 speeds: a standard 20-25 minute working... [See More]
- Filler: Unfilled
- Chemical System: Polyurethane
- Type: Elastomer
- Industry: OEM or Industrial; Tooling
from Hapco, Inc.
HIGH PERFORMANCE HYBRID ELASTOMERIC POLYMER ALLOYS. Hapflex ™ 700/800 products are colorless, high strength elastomers available in hardnesses ranging from 65A to 72D. Hapflex ™ 700/800 products exhibit high tensile strength, high tear strength, and excellent elongation. All Hapflex... [See More]
- Filler: Unfilled
- Chemical System: Polyurethane
- Type: Elastomer
- Industry: Electronics; OEM or Industrial; Tooling
from Hapco, Inc.
Solid Reaction Injection Molding. S-RIM ™ is a series of advanced casting resins that exhibit high physical properties and are extremely fast curing. Easy to mix with a 1:1 ratio by volume. Available in black or natural/tan. Available in 60 or 240 second gel time. 6260/61 can be de-molded in... [See More]
- Filler: Unfilled
- Viscosity: 600
- Industry: OEM or Industrial; Tooling
from Hapco, Inc.
Elastomeric Series. Various hardness elastomers, shore 20A - 72D. Clear in color. Available in 2 speeds - fast and slow. STERalloy FDG is the first Liquid Molding Polymer Alloy Series that has been specifically designed for food and drug applications. All of the products in the STERalloy FDG Series... [See More]
- Filler: Unfilled
- Chemical System: Polyurethane
- Type: Elastomer
- Industry: Sanitary; Tooling
from Hapco, Inc.
Rigid Series. Rigid, tough polymer alloy plastics. High heat distortion. High physical properties. STERalloy FDG is the first Liquid Molding Polymer Alloy Series that has been specifically designed for food and drug applications. All of the products in the STERalloy FDG Series exhibit unique... [See More]
- Filler: Unfilled
- Industry: Sanitary; Tooling
- Chemical System: Polyurethane
- Viscosity: 7000 to 8000
from Hapco, Inc.
Tuffalloy ™ is an advanced chemistry developed by Hapco to meet today ’s market demands for prototype and low production parts that mimic the physical attributes of many injection molding materials. Tuffalloy ™ 4270 Series. Tuffalloy ™ 4270 series are low viscosity Liquid... [See More]
- Filler: Unfilled
- Viscosity: 250 to 350
- Industry: OEM or Industrial; Tooling
from Hapco, Inc.
A new series of water clear casting resins that are mercury free, have high physical properties, and are available in multiple gel times. Exceptional clarity with refractive indices ranging from 1.502-1.585. Available in 10, 20 and 40 min. gel times. Extremely UV resistant. High physicals such as:... [See More]
- Filler: Unfilled
- Tensile (Break): 6800
- Industry: Tooling
- Elongation: 13.0
from Hapco, Inc.
A series of general purpose Liquid Molding Compounds. This product turns a natural white but is available pigmented white for extra brightness. Both versions are available in an 8.5 minute or 25 minute gel time. [See More]
- Filler: Unfilled
- Viscosity: 300
- Industry: Tooling
from Hapco, Inc.
A series of general purpose Liquid Molding Compounds that do not change color and remain clear / slightly yellow when cured. Ultralloy 200 Series are ideal for in mold coloring of parts. They can be easily pigmented and the color remains the same in the cured or liquid state. Tensile strengths from... [See More]
- Filler: Unfilled
- Tensile (Break): 10300 to 11800
- Industry: Tooling
- Viscosity: 300
from Hapco, Inc.
A series of general purpose Liquid Molding Compounds that do not change color and remain clear / light yellow when cured. Ultralloy 200 Series are ideal for in mold coloring of parts. They can be easily pigmented and the color remains the same in the cured or liquid state. Tensile strengths from... [See More]
- Filler: Unfilled
- Tensile (Break): 10300 to 11800
- Industry: Tooling
- Viscosity: 300
from Hapco, Inc.
A series of flame retardant Liquid Molding Compounds with high physical properties. The tensile strength is 12,600 psi and flexural strength is 16,500 psi after post cure. This series is available in a 2, 4, 14, and 28 minute gel time. [See More]
- Filler: Unfilled
- Industry: Tooling
- Features: Flame Retardant
- Tensile (Break): 12600
from Hapco, Inc.
A series of general purpose Liquid Molding Compounds with low moisture sensitivity. Ultralloy 40 and 50 Series can be open cast, pressure cast, or vacuum cast. The products are pigmented white and have excellent impact strength. [See More]
- Filler: Unfilled
- Viscosity: 500
- Industry: Tooling
from Hapco, Inc.
A series of general purpose Liquid Molding Compounds that do not change color and remain clear / light yellow when cured. Ultralloy 200 Series are ideal for in mold coloring of parts. They can be easily pigmented and the color remains the same in the cured or liquid state. Tensile strengths from... [See More]
- Filler: Unfilled
- Tensile (Break): 10300 to 11800
- Industry: Tooling
- Viscosity: 1000