Three Phase Explosion Proof Heaters
from Trent, Inc.
Used for oil preheating, oil baths, wax and other heat transfer fluids. TRENT FO Series Fintube Heaters are designed to give years of trouble-free service when the tubes are completely covered with fluid, used on correct voltage and kept free of carbonization. TRENT FO Series Fintube Heater casings... [See More]
- Phase: Three Phase AC Voltage
- Maximum Operating (Sheath) Temperature: 550
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 480
from OMEGA Engineering, Inc.
•. Flange Sizes 3" to 5" of High Grade Steel. •. General Purpose, NEMA 1 Rated Enclosure or Moisture Resistant, Explosion Resistant † Enclosure Available. •. Sturdy 0.475"Diameter Copper Elements. •. 6 to 150 kW. •. 240 and 480 Vac Power, 1 and 3 Phase [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 240 to 480
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- kWatts: 6.00 to 150.00
from Heat Exchange & Transfer, Inc.
Air duct heaters are available in standard and custom designs. The duct heater can be installed vertically or horizontally into a rectangular or square duct. Transition sections for circular or small ducts are available. The duct heater consists of stainless steel tubular elements welded into a... [See More]
- Phase: Three Phase AC Voltage
- AC Voltage Required: 240
- Heater Type: Air Heater; Duct Heater; Explosion-proof Heater (optional feature)
- kWatts: 6.00
from Infinity Fluids Corp.
Compact, rapid heating of liquids, steam and gases for semi-con, power generation, food service, chemical, pharmaceutical and all industrial applications Infinity has developed and patented the most efficient and rapid response heater for all precision control processes with negligible pressure... [See More]
- Phase: Three Phase AC Voltage
- AC Voltage Required: 208 to 480
- Heater Type: Air Heater; Circulation Heater; Explosion-proof Heater (optional feature); Inline Heater; Water Heaters
- kWatts: 10.00 to 72.00
from TPI Corporation
GRAY EPOXY TEXTURED POWDER COATED 16 GAUGE STEEL MATERIAL. 34 INCH L X 9 INCH W X 18 INCH H SIZE. 3 PHASE(S). ETL (CANADA AND US) APPROVAL. 208 V VOLTAGE RATING. CLASS I DIV 1 AND 2 GROUP B C D, NEMA 4 ENCLOSURE. 2.2 AMPERE CURRENT RATING. 356 DEG F TEMPERATURE RATING. 800 W POWER RATING. 2730... [See More]
- Phase: Three Phase AC Voltage
- Maximum Operating (Sheath) Temperature: 356
- Heater Type: Air Heater; Explosion-proof Heater; RoomSpace
- AC Voltage Required: 208
from Durex Industries
Flanged immersion heaters are constructed with formed tubular heating elements brazed or welded to a high pressure flange for direct immersion into tanks and pressure vessels. Flanged immersion heaters are capable of achieving higher wattage requirements than screw plug heaters due to the fact that... [See More]
- Phase: Three Phase AC Voltage
- AC Voltage Required: 240 to 480
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- kWatts: 0.04
from Chromalox
304 Stainless Steel Element. 5, 10, 20, or 40 w/in ² (1, 1.6, 3.5 &. Carbon Steel Flange. 3" to 12" 150# Flange Size. Moisture Resistant Terminal. Third Party Certified. 1 - 25 kW Unit Ratings. 240 V, 480 V, or 600 V, Three. 24" (610 mm) Immersion. Standard Over-Temperature. ASME Design... [See More]
- Phase: Three Phase AC Voltage
- AC Voltage Required: 240 to 600
- Heater Type: Explosion-proof Heater
- kWatts: 1.00 to 25.00
from OMEGA Engineering, Inc.
bull;. Type E-2 Moisture Tight/Explosion Resistant Enclosure Standard*. •. 240 V Models Include an Integral 3 Phase Thermostat. •. 3" (8 cm) 150 lb (68 kg) Steel Flange. •. Low Watt Density Steel Sheath Elements Suitable for Heating Sump Oil. •. 3 to 6 kW. •. 240 and 480 V,... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 240 to 480
- Heater Type: Explosion-proof Heater; Immersion Heater
- kWatts: 3.00 to 6.00
from Heat Exchange & Transfer, Inc.
The UST (Unitary Storage Tank) heater is a completely packaged tank heating unit. The UST utilizes a flexible open coil heating element. The open coil heater consists of nickel chromium resistance coils supported in high temperature ceramic insulators on a flexible stainless steel strap. Each... [See More]
- Phase: Three Phase AC Voltage
- AC Voltage Required: 120 to 600
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- kWatts: 10.00
from TPI Corporation
14 GAUGE STEEL MATERIAL. 22-3/8 INCH W X 19-3/4 INCH D X 17-3/4 INCH H SIZE. EPOXY POWDER COATED PAINTED FINISH. 3 PHASE(S). ETL (CANADA AND US) APPROVAL. HAZARDOUS LOCATION APPLICATION. 208 V VOLTAGE RATING. 9.8 AMPERE CURRENT RATING. 3 KW POWER RATING. 10250 BTU/HR CAPACITY. 580 CFM AIR FLOW RATE. [See More]
- Phase: Three Phase AC Voltage
- AC Voltage Required: 208
- Heater Type: Air Heater; Explosion-proof Heater; RoomSpace
- kWatts: 3.00
from Durex Industries
Screw plug immersion heaters utilize an NPT screw plug for direct immersion into liquids, oils, or other heat transfer mediums. These heaters utilize a rugged tubular heating element with sheath materials of copper, stainless steel, or Incoloy. The elements are formed and welded or brazed into the... [See More]
- Phase: Three Phase AC Voltage
- Maximum Operating (Sheath) Temperature: 750
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 240 to 480
from Chromalox
120, 208, 240, 277 and 480 Volt. Temperature Code T3 (for Class 1, Div. 1, Groups B, C, D) - 9 W/In ². UL Listed. Applications. For coal, ore, resins and other bulk handling equipment. Explosion-Proof Applications- (Class I, Group C and D) chemical and petrochemical plants, tanks, large pipes,... [See More]
- Phase: Three Phase AC Voltage
- AC Voltage Required: 120 to 480
- Heater Type: Explosion-proof Heater; Strip
- kWatts: 0.11 to 1.10
from OMEGA Engineering, Inc.
•. 240 and 480V, 3 Phase. •. 3 to 9kW. •. Rugged Steel Sheath. •. Low Watt Density for Heating Medium Weight Oils. •. 2 1/2" NPT Steel Fitting. •. General Purpose NEMA-1 Enclosure or Moisture Tight/Explosion Resistant Enclosure* [See More]
- Phase: Three Phase AC Voltage
- AC Voltage Required: 240 to 480
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- kWatts: 3.00 to 9.00
from Chromalox
LTFX units provide low watt density heating over a large surface area, while providing precise temperature control for such materials as fire water storage, asphalt, diesel, lube oils, ethanol, bio-diesel, glycerin, animal fats, vegetable oils, fuel oils, or similar types of liquids. 4 - 240 kW Unit... [See More]
- Phase: Three Phase AC Voltage
- AC Voltage Required: 480 to 600
- Heater Type: Explosion-proof Heater; Immersion Heater
- kWatts: 4.00 to 240.00
from OMEGA Engineering, Inc.
bull;. NEMA 1 Rated, E1 General Purpose Enclosure or Moisture Resistant/Explosion Resistant Enclosure. •. Premium Quality Stainless Steel Screw Plug. •. 240 and 480V, 3 Phase. •. 3 to 18 kW. •. Incoloy Sheath Provides Excellent Corrosion Resistance for Solution Water... [See More]
- Phase: Three Phase AC Voltage
- AC Voltage Required: 240 to 480
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- kWatts: 3.00 to 18.00