Steel Explosion Proof Heaters
from Armstrong International
Armstrong offers their Heavy Duty Industrial Unit Heaters mounted on a Heavy Duty custom Service Cart with Pre- Piped Assemblies. This design offers the customer portable, on demand, spot heat treatment to any area or equipment within their facility. Applications. • Integrated Pest Management... [See More]
- Sleeve (Sheath) Material: Steel
- Heater Type: Air Heater; Explosion-proof Heater (optional feature); ForcedAir
from OMEGA Engineering, Inc.
bull;. Type E-2 Moisture Tight/Explosion Resistant Enclosure Standard*. •. 240 V Models Include an Integral 3 Phase Thermostat. •. 3" (8 cm) 150 lb (68 kg) Steel Flange. •. Low Watt Density Steel Sheath Elements Suitable for Heating Sump Oil. •. 3 to 6 kW. •. 240 and 480 V,... [See More]
- Sleeve (Sheath) Material: Steel
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- Heater Type: Explosion-proof Heater; Immersion Heater
- AC Voltage Required: 240 to 480
from Process Heating Company, Inc.
No tanks to drain. Easily installed the heavy-duty assemblies weld directly into storage tanks to deliver long term and economical performance. Once installed, the flexible heater elements are removable from heater tubes without the need to drain the tank or disconnect fluid lines. LO-DENSITY IS A... [See More]
- Sleeve (Sheath) Material: Stainless Steel (optional feature); Steel
- Maximum Operating (Sheath) Temperature: 750
- Heater Type: Explosion-proof Heater; Tubular Heaters
- AC Voltage Required: 600
from Durex Industries
Flanged immersion heaters are constructed with formed tubular heating elements brazed or welded to a high pressure flange for direct immersion into tanks and pressure vessels. Flanged immersion heaters are capable of achieving higher wattage requirements than screw plug heaters due to the fact that... [See More]
- Sleeve (Sheath) Material: Steel; Carpenter, Monel, Inconel, Hastelloy, Ti
- Phase: Three Phase AC Voltage
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 240 to 480
from OMEGA Engineering, Inc.
•. 1 1/4" NPT Steel Screw Plug. •. Steel Sheath Elements. •. 10 and 20 W/In2. •. 0.5 - 3 kW. •. Without Thermostat. •. 120 and 240 Volt, Single Phase. •. General Purpose or Moisture Resistant/ Explosion Resistant Terminal Enclosure [See More]
- Sleeve (Sheath) Material: Steel
- Phase: Single Phase AC Voltage
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 120 to 240
from Process Heating Company, Inc.
PHCo's "Lo-Density" Circulation Heaters are perfect for in-line heating of fluids. These are complete packaged systems available with or without control panels. The Flanged vessels are available with ASME pressure rating and include high temperature insulation and weatherproof aluminum jacketing. [See More]
- Sleeve (Sheath) Material: Stainless Steel (optional feature); Steel
- Maximum Operating (Sheath) Temperature: 750
- Heater Type: Circulation Heater; Explosion-proof Heater (optional feature)
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
from Durex Industries
Screw plug immersion heaters utilize an NPT screw plug for direct immersion into liquids, oils, or other heat transfer mediums. These heaters utilize a rugged tubular heating element with sheath materials of copper, stainless steel, or Incoloy. The elements are formed and welded or brazed into the... [See More]
- Sleeve (Sheath) Material: Steel; Carpenter, Monel, Inconel, Hastelloy, Ti
- Maximum Operating (Sheath) Temperature: 750
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Phase: Single Phase AC Voltage
from OMEGA Engineering, Inc.
•. 2" NPT Steel Screw Plug. •. Steel Sheath Elements. •. 6 - 8 W/In2. •. 0.5 - 3 kW. •. Without Thermostat. •. 120, 208, 240 and 480 Volt, 1 & 3 Phase. •. General Purpose or Moisture Resistant/ Explosion Resistant Terminal Enclosure [See More]
- Sleeve (Sheath) Material: Steel
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 120 to 480
from Process Heating Company, Inc.
The "Problem Solver" for underground tanks. Having trouble solving your underground storage tank problems? PHCo Lo-Density Drop-In Heater Kits have been designed for the heating of underground tanks and other applications that cannot be cut or welded on. These heaters can be used in multiples if... [See More]
- Sleeve (Sheath) Material: Stainless Steel (optional feature); Steel
- Maximum Operating (Sheath) Temperature: 750
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
from OMEGA Engineering, Inc.
•. Rugged Steel Sheath for Use with Lightweight Oils. •. 1.5 to 6 kW. •. 120 280, 240 or 480V. 1 Phase. •. General Purpose1 NEMA-1 Rated and UL Listed Enclosure or Moisture Resistant/ Explosion Enclosure2 [See More]
- Sleeve (Sheath) Material: Steel
- Phase: Single Phase AC Voltage
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 120 to 480
from Process Heating Company, Inc.
Flanged Immersion Heaters for use in tanks, large vats and reservoirs. These heaters consist of a standard 150# or 300# flange for mounting and PHCos exclusive heating elements. The elements are "dry well" and "low density" design. The dry wells allow the elements to be serviced or replaced without... [See More]
- Sleeve (Sheath) Material: Stainless Steel (optional feature); Steel
- Maximum Operating (Sheath) Temperature: 750
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
from OMEGA Engineering, Inc.
•. 3 to 9 kW. •. 120, 208, 240 or 480 V, 1 & 3 Phase. •. General Purpose NEMA-1 Rated and UL Listed Enclosure1 or Moisture Resistant/Explosion Resistant Enclosure2 [See More]
- Sleeve (Sheath) Material: Steel
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 120 to 480
from Process Heating Company, Inc.
Rigid Tubular Drywell Heaters solve the problem of heating viscous products without damage to the product being heated. The Rigid Heaters can be installed as new or as replacement equipment for existing metal sheathed style tubular units that have higher watt density. Process Heatings Rigid Heaters... [See More]
- Sleeve (Sheath) Material: Stainless Steel (optional feature); Steel
- Maximum Operating (Sheath) Temperature: 750
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
from OMEGA Engineering, Inc.
•. Heavy Duty Steel Sheath for Use With Medium Weight Oils. •. Low Watt Density. •. 2 to 6kW. •. 240 and 480V, 1 Phase. •. General Purpose NEMA- Enclosure or Moisture Resistant/Explosion Resistant2 † Enclosure Available [See More]
- Sleeve (Sheath) Material: Steel
- Phase: Single Phase AC Voltage
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 240 to 480
from Process Heating Company, Inc.
Unitized Heaters remain Process Heating Company's best selling product line. Its popularity continues due to the ease of installation into any tank or vat; its 100% efficiency; its ease of automation; its lack of maintenance and remarkable reliability. The Lo-Density Unitized Heater dissipates as... [See More]
- Sleeve (Sheath) Material: Stainless Steel (optional feature); Steel
- Maximum Operating (Sheath) Temperature: 750
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
from OMEGA Engineering, Inc.
•. 240 and 480V, 3 Phase. •. 3 to 9kW. •. Rugged Steel Sheath. •. Low Watt Density for Heating Medium Weight Oils. •. 2 1/2" NPT Steel Fitting. •. General Purpose NEMA-1 Enclosure or Moisture Tight/Explosion Resistant Enclosure* [See More]
- Sleeve (Sheath) Material: Steel
- Phase: Three Phase AC Voltage
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 240 to 480