Immersion Heater Explosion Proof Heaters
from Trent, Inc.
Used for oil preheating, oil baths, wax and other heat transfer fluids. TRENT FO Series Fintube Heaters are designed to give years of trouble-free service when the tubes are completely covered with fluid, used on correct voltage and kept free of carbonization. TRENT FO Series Fintube Heater casings... [See More]
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Phase: Single Phase AC Voltage
- Maximum Operating (Sheath) Temperature: 550
- AC Voltage Required: 240
from Chromalox
LTFX units provide low watt density heating over a large surface area, while providing precise temperature control for such materials as fire water storage, asphalt, diesel, lube oils, ethanol, bio-diesel, glycerin, animal fats, vegetable oils, fuel oils, or similar types of liquids. 4 - 240 kW Unit... [See More]
- Heater Type: Explosion-proof Heater; Immersion Heater
- AC Voltage Required: 480 to 600
- Phase: Three Phase AC Voltage
- kWatts: 4.00 to 240.00
from Durex Industries
Flanged immersion heaters are constructed with formed tubular heating elements brazed or welded to a high pressure flange for direct immersion into tanks and pressure vessels. Flanged immersion heaters are capable of achieving higher wattage requirements than screw plug heaters due to the fact that... [See More]
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 240 to 480
- Phase: Three Phase AC Voltage
- kWatts: 0.04
from Process Heating Company, Inc.
The "Problem Solver" for underground tanks. Having trouble solving your underground storage tank problems? PHCo Lo-Density Drop-In Heater Kits have been designed for the heating of underground tanks and other applications that cannot be cut or welded on. These heaters can be used in multiples if... [See More]
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
- Maximum Operating (Sheath) Temperature: 750
- AC Voltage Required: 200 to 600
from Heat Exchange & Transfer, Inc.
The OCH (open coil heater) series of elements consists of helical wound nickel chromium resistance wires supported by interlocking ceramic insulators. The ceramic insulators are mounted on a flexible stainless steel strap which allows the element to be bent to an 18 ” radius. These flexible... [See More]
- Heater Type: Cable or Coil Heater; Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 120 to 600
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
- Watt Density: 1 to 12
from OMEGA Engineering, Inc.
•. Rugged General Purpose Models-UL Listed and NEMA-1 Rated. •. Optional Moisture Tight/ Explosion Resistant Enclosure Available. •. Ideal for pH 6 to pH 8 Clean Liquids. •. 1.5 and 15 kW [See More]
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 120 to 480
- Phase: Single Phase AC Voltage
- kWatts: 1.50 to 15.00
from Durex Industries
Screw plug immersion heaters utilize an NPT screw plug for direct immersion into liquids, oils, or other heat transfer mediums. These heaters utilize a rugged tubular heating element with sheath materials of copper, stainless steel, or Incoloy. The elements are formed and welded or brazed into the... [See More]
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Phase: Single Phase AC Voltage
- Maximum Operating (Sheath) Temperature: 750
- AC Voltage Required: 120 to 240
from Process Heating Company, Inc.
Flanged Immersion Heaters for use in tanks, large vats and reservoirs. These heaters consist of a standard 150# or 300# flange for mounting and PHCos exclusive heating elements. The elements are "dry well" and "low density" design. The dry wells allow the elements to be serviced or replaced without... [See More]
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
- Maximum Operating (Sheath) Temperature: 750
- AC Voltage Required: 200 to 600
from Heat Exchange & Transfer, Inc.
The UST (Unitary Storage Tank) heater is a completely packaged tank heating unit. The UST utilizes a flexible open coil heating element. The open coil heater consists of nickel chromium resistance coils supported in high temperature ceramic insulators on a flexible stainless steel strap. Each... [See More]
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 120 to 600
- Phase: Three Phase AC Voltage
- kWatts: 10.00
from OMEGA Engineering, Inc.
•. Rugged, Heavy Duty Construction. •. Models Available with Explosion Resistant Enclosure. •. 0.475" Diameter Copper Sheath, Ideal for pH 6 to pH 8 Liquids. •. 3 to 18 kw. •. 120, 208, 240 and 480 Vac 1 and 3 Phase Power [See More]
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 120 to 480
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
- kWatts: 3.00 to 18.00
from Process Heating Company, Inc.
No tanks to drain. Easily installed the heavy-duty assemblies weld directly into storage tanks to deliver long term and economical performance. Once installed, the flexible heater elements are removable from heater tubes without the need to drain the tank or disconnect fluid lines. LO-DENSITY IS A... [See More]
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
- Maximum Operating (Sheath) Temperature: 750
- AC Voltage Required: 200 to 600
from OMEGA Engineering, Inc.
•. Flange Sizes 3" to 5" of High Grade Steel. •. General Purpose, NEMA 1 Rated Enclosure or Moisture Resistant, Explosion Resistant † Enclosure Available. •. Sturdy 0.475"Diameter Copper Elements. •. 6 to 150 kW. •. 240 and 480 Vac Power, 1 and 3 Phase [See More]
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 240 to 480
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 6.00 to 150.00
from Process Heating Company, Inc.
Rigid Tubular Drywell Heaters solve the problem of heating viscous products without damage to the product being heated. The Rigid Heaters can be installed as new or as replacement equipment for existing metal sheathed style tubular units that have higher watt density. Process Heatings Rigid Heaters... [See More]
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
- Maximum Operating (Sheath) Temperature: 750
- AC Voltage Required: 200 to 600
from OMEGA Engineering, Inc.
bull;. Type E-2 Moisture Tight/Explosion Resistant Enclosure Standard*. •. 240 V Models Include an Integral 3 Phase Thermostat. •. 3" (8 cm) 150 lb (68 kg) Steel Flange. •. Low Watt Density Steel Sheath Elements Suitable for Heating Sump Oil. •. 3 to 6 kW. •. 240 and 480 V,... [See More]
- Heater Type: Explosion-proof Heater; Immersion Heater
- AC Voltage Required: 240 to 480
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 3.00 to 6.00
from Process Heating Company, Inc.
Unitized Heaters remain Process Heating Company's best selling product line. Its popularity continues due to the ease of installation into any tank or vat; its 100% efficiency; its ease of automation; its lack of maintenance and remarkable reliability. The Lo-Density Unitized Heater dissipates as... [See More]
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
- Maximum Operating (Sheath) Temperature: 750
- AC Voltage Required: 200 to 600
from OMEGA Engineering, Inc.
The OMEGALUX ® MTS -2 Series process water immersion heater is available for applications with mild acid or alkaline conditions. The passivated stainless steel construction allows complete compatibility. [See More]
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 120 to 480
- Phase: Single Phase AC Voltage
- kWatts: 1.50 to 15.00
from OMEGA Engineering, Inc.
•. 1 1/4" NPT Steel Screw Plug. •. Steel Sheath Elements. •. 10 and 20 W/In2. •. 0.5 - 3 kW. •. Without Thermostat. •. 120 and 240 Volt, Single Phase. •. General Purpose or Moisture Resistant/ Explosion Resistant Terminal Enclosure [See More]
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 120 to 240
- Phase: Single Phase AC Voltage
- kWatts: 0.50 to 3.00
from OMEGA Engineering, Inc.
•. 2" NPT Steel Screw Plug. •. Steel Sheath Elements. •. 6 - 8 W/In2. •. 0.5 - 3 kW. •. Without Thermostat. •. 120, 208, 240 and 480 Volt, 1 & 3 Phase. •. General Purpose or Moisture Resistant/ Explosion Resistant Terminal Enclosure [See More]
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 120 to 480
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
- kWatts: 0.50 to 3.00
from OMEGA Engineering, Inc.
•. Rugged Steel Sheath for Use with Lightweight Oils. •. 1.5 to 6 kW. •. 120 280, 240 or 480V. 1 Phase. •. General Purpose1 NEMA-1 Rated and UL Listed Enclosure or Moisture Resistant/ Explosion Enclosure2 [See More]
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 120 to 480
- Phase: Single Phase AC Voltage
- kWatts: 1.50 to 6.00
from OMEGA Engineering, Inc.
•. 3 to 9 kW. •. 120, 208, 240 or 480 V, 1 & 3 Phase. •. General Purpose NEMA-1 Rated and UL Listed Enclosure1 or Moisture Resistant/Explosion Resistant Enclosure2 [See More]
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 120 to 480
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
- kWatts: 3.00 to 9.00
from OMEGA Engineering, Inc.
•. Heavy Duty Steel Sheath for Use With Medium Weight Oils. •. Low Watt Density. •. 2 to 6kW. •. 240 and 480V, 1 Phase. •. General Purpose NEMA- Enclosure or Moisture Resistant/Explosion Resistant2 † Enclosure Available [See More]
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 240 to 480
- Phase: Single Phase AC Voltage
- kWatts: 2.00 to 6.00
from OMEGA Engineering, Inc.
•. 240 and 480V, 3 Phase. •. 3 to 9kW. •. Rugged Steel Sheath. •. Low Watt Density for Heating Medium Weight Oils. •. 2 1/2" NPT Steel Fitting. •. General Purpose NEMA-1 Enclosure or Moisture Tight/Explosion Resistant Enclosure* [See More]
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 240 to 480
- Phase: Three Phase AC Voltage
- kWatts: 3.00 to 9.00
from OMEGA Engineering, Inc.
•. For Insertion into 2" or Larger Pipe. •. Moisture/Explosion Resistant Enclosure*. •. 14 to 13 kW. •. 240 and 480 V, 1 Phase. •. 2" NPT Steel Screw Plug. •. Lengths to 347". •. Incoloy Sheath Heating Elements [See More]
- Heater Type: Explosion-proof Heater; Immersion Heater
- AC Voltage Required: 240 to 480
- Phase: Single Phase AC Voltage
- kWatts: 4.00 to 13.00
from OMEGA Engineering, Inc.
•. Stainless Steel Wetted Construction. •. 120, 208, 240, 480V 1 and 3 Phase Power. •. Reliable Heater Design. •. General Purpose Enclosure, NEMA-1 Rated and UL Listed [See More]
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 120 to 480
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
- kWatts: 3.00 to 18.00
from OMEGA Engineering, Inc.
•. 1" NPT Brass Screw Plug. •. Copper Sheath Element. •. High Watt Density (64 to 86 W/in2). •. 0.75 to 3 kW. •. Without Thermostat. •. 120 and 240 Volt, Single Phase. •. General Purpose or Moisture-Resistant/ Explosion-Resistant Terminal Enclosure [See More]
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 120 to 240
- Phase: Single Phase AC Voltage
- kWatts: 0.75 to 3.00
from OMEGA Engineering, Inc.
bull;. 1" NPT Stainless Steel Passivated Screw Plug. •. Stainless Steel Passivated Elements. •. High Watt Density (64 to 86 W/in2). •. 0.75 to 3 kW. •. Without Thermostat. •. 120 and 240 Volt, Single Phase. •. General Purpose or Moisture-Resistant/ Explosion-Resistant... [See More]
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 120 to 240
- Phase: Single Phase AC Voltage
- kWatts: 0.75 to 3.00
from OMEGA Engineering, Inc.
bull;. 1 ¼" NPT Stainless Steel Passivated Screw Plug. •. Stainless Steel Passivated Elements. •. High Watt Density (43 to 86 W/in2). •. 1 to 2 kW. •. Without Thermostat. •. 120 and 240 Volt, Single Phase. •. General Purpose or Moisture-Resistant/... [See More]
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 120 to 240
- Phase: Single Phase AC Voltage
- kWatts: 1.00 to 2.00
from OMEGA Engineering, Inc.
bull;. NEMA 1 Rated, E1 General Purpose Enclosure or Moisture Resistant/Explosion Resistant Enclosure. •. Premium Quality Stainless Steel Screw Plug. •. 240 and 480V, 3 Phase. •. 3 to 18 kW. •. Incoloy Sheath Provides Excellent Corrosion Resistance for Solution Water... [See More]
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 240 to 480
- Phase: Three Phase AC Voltage
- kWatts: 3.00 to 18.00
from OMEGA Engineering, Inc.
•. Durable Incoloy Sheath for Superior Corrosion Protection. •. 2" NPT Stainless Steel Screw Plug. •. 120, 240, 480 V, 1 Phase Power. •. General Purpose-UL Listed Enclosure or Moisture Resistant/Explosion Resistant Enclosure. •. 1.5 to 15kW [See More]
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- AC Voltage Required: 120 to 480
- Phase: Single Phase AC Voltage
- kWatts: 1.50 to 15.00