Moving Coil Linear Motors
from Tecnotion
The TB motors are heavy duty workhorses that combine high acceleration and speed, submicron positioning accuracy and low power consumption with a superb force density. They excel in applications where high loads and long duty cycles are the order of the day. When you require a motor that takes your... [See More]
- Linear Motor Type: Moving Coil; Moving Magnet; AC Synchronous Design
- Peak Force: 0.0 to 1011.6
- Continuous Thrust: 0.0 to 427.1
- Maximum Speed: 0.0 to 196.9
from Yaskawa America, Inc. - Motion Division
Iron-less coil and magnet track components. Coreless GW linear servo motors are composed of moving coils and stationary magnet tracks. The moving coil has no iron content and is made of accurately resin molded motor windings. The stationary magnet track is made of two nickelized steel plates with... [See More]
- Linear Motor Type: Moving Coil
- Peak Force: 31.5
- Continuous Thrust: 10.6
- Continuous Current: 0.8000
from Tecnotion
The TBW series is the water cooled variant of the TB series. It features a fully integrated, highly efficient cooling system which enables the TBW to reach even higher continuous forces than the standard version and sustain extreme accelerations while maintaining its submicron position accuracy. [See More]
- Linear Motor Type: Moving Coil; Moving Magnet; AC Synchronous Design
- Peak Force: 0.0 to 1517.4
- Continuous Thrust: 0.0 to 674.4
- Maximum Speed: 0.0 to 196.9
from Yaskawa America, Inc. - Motion Division
Iron-core coil and magnet track components. Iron core FW linear motors are composed of moving coils with laminated iron-core and single sided stationary magnet tracks. The moving coil of the FW linear motor is composed of laminated iron core and prewound coil bobbins inserted into the slots located... [See More]
- Linear Motor Type: Moving Coil
- Peak Force: 19.3
- Continuous Thrust: 5.6
- Continuous Current: 0.7000
from Tecnotion
The TD36 series use iron core performance in places you never thought it would not fit. Our miniature motor brings the benefits of iron-core technology to extremely space-restricted designs, ideal for systems where space is critical and performance cannot be compromised. With 40N in just 24.8 mm x... [See More]
- Linear Motor Type: Moving Coil; Moving Magnet; AC Synchronous Design
- Peak Force: 0.0 to 39.8
- Continuous Thrust: 0.0 to 16.2
- Maximum Speed: 0.0 to 629.9
from Yaskawa America, Inc. - Motion Division
Balanced Iron-core coil and magnet track components. Iron core TW linear motors are composed of moving coils with a laminated iron-core and a pair of stationary magnet tracks that are placed on each side of the moving coils. The moving coil of the TW linear motor is composed of laminated iron core... [See More]
- Linear Motor Type: Moving Coil
- Peak Force: 85.4
- Continuous Thrust: 29.2
- Continuous Current: 2.3
from Tecnotion
The TD55 series are built for tight spaces-without sacrificing performance. The TD55 series delivers serious continuous force in a surprisingly compact design. With its low build height, this motor is ideal for OEM applications where space is limited but reliability and output cannot be compromised. [See More]
- Linear Motor Type: Moving Coil; Moving Magnet; AC Synchronous Design
- Peak Force: 0.0 to 190.0
- Continuous Thrust: 0.0 to 95.8
- Maximum Speed: 0.0 to 779.5
from Tecnotion
The TD82 series reduces required magnet plate length, optimizing stroke length for greater system efficiency. Engineered for demanding applications that require long stroke lengths and high continuous force, the TD82 series brings impressive force density to an ultra-short motor design. The... [See More]
- Linear Motor Type: Moving Coil; Moving Magnet; AC Synchronous Design
- Peak Force: 0.0 to 407.1
- Continuous Thrust: 0.0 to 235.6
- Maximum Speed: 0.0 to 252.0
from Tecnotion
The TL is our most popular iron core motor. It features an extremely low attraction force between the coils and the magnets and stands out for its small size, high acceleration, high speed and accuracy. The TL is also available in long versions, which makes this all-rounder suited for nearly any... [See More]
- Linear Motor Type: Moving Coil; Moving Magnet; AC Synchronous Design
- Peak Force: 0.0 to 809.3
- Continuous Thrust: 0.0 to 377.7
- Maximum Speed: 0.0 to 370.1
from Tecnotion
The TM motors, for applications that do not require high forces, it is often more effective to use a smaller and less costly motor. Over the years, the TM series has proven to be a very versatile, reliable and efficient motor for a wide range of applications. To enhance its effectiveness, the TM... [See More]
- Linear Motor Type: Moving Coil; Moving Magnet; AC Synchronous Design
- Peak Force: 0.0 to 161.9
- Continuous Thrust: 0.0 to 80.9
- Maximum Speed: 0.0 to 1259.8
from Tecnotion
The TBWX series features stronger magnet plates than our TBW series, allowing for a compact motor design that takes up less space in your system. The new TBWX iron core linear motors have an optimized force constant, making your system more efficient and capable of handling heavier loads or higher... [See More]
- Linear Motor Type: Moving Coil; Moving Magnet; AC Synchronous Design
- Peak Force: 0.0 to 1740.4
- Continuous Thrust: 0.0 to 773.5
- Maximum Speed: 0.0 to 192.9
from Tecnotion
The TLX series features stronger magnet plates than our TL series, allowing for a compact motor design that takes up less space in your system. The new TLX iron core linear motors have an optimized force constant, making your system more efficient and capable of handling heavier loads or higher... [See More]
- Linear Motor Type: Moving Coil; Moving Magnet; AC Synchronous Design
- Peak Force: 0.0 to 953.4
- Continuous Thrust: 0.0 to 444.9
- Maximum Speed: 0.0 to 362.2
from Tecnotion
The UC is our smallest "off the shelf" motor. Weighing in at just a few grams, this versatile, compact and affordable motor is still able to sustain a continuous force of 10 or 20N. Due to its low weight it is also suited to operate in a vertical application environment. [See More]
- Linear Motor Type: Moving Coil; Moving Magnet; AC Synchronous Design
- Peak Force: 0.0 to 16.2
- Continuous Thrust: 0.0 to 4.5
- Maximum Speed: 0.0 to 196.9
from Aerotech, Inc.
Design Features. High output force in an 86.4 mm x 34.3 mm cross section. Continuous force to 397.6 N (89.4 lb); peak force to 1590.4 N (357.5 lb). High-energy rare-earth magnets used in magnet tracks for high acceleration capability. Non-magnetic forcer provides high force with zero cogging for... [See More]
- Linear Motor Type: Moving Coil
- Peak Force: 155.7 to 357.5
- Continuous Thrust: 24.7 to 89.4
- Continuous Current: 2.65 to 8.91
from Ningbo Kepo Electronics Co., Ltd.
Kepo customizes Z -direction linear motors for push-buttons and touchscreens in all dimensions. The products are of strong F0 stability, high-temperature resistance (150 ℃), large acceleration, high peak value (3.20g), good reliability, and wide vibration frequency. Features: Strong F0... [See More]
- Linear Motor Type: Moving Coil
- Maximum Acceleration: 2.0
from MotiCont
The Linear Motor Actuator is used in positioning applications where high speed and high accuracy are required. The actuator may be used in the following industries; Semiconductor, Disk Drive, Automotive, Medical, Industrial, Optical, Test and Manufacturing. Voice coil motors do not need commutation... [See More]
- Linear Motor Type: Moving Coil
- Travel: 0.70 to 5.20
- Peak Force: 6.0 to 20.2
from Kollmorgen Corporation
IC Series Ironcore motors provide the highest force per frame size and feature a patented anti-cogging design for smooth operation. These motors have coils wound on silicon steel laminations to maximize the generated force with a single-sided magnet way. Our co-engineering capabilities allow us to... [See More]
- Linear Motor Type: Moving Coil
- Peak Force: 70.8 to 1889.9
- Continuous Thrust: 32.4 to 1554.7
- Maximum Acceleration: 15.3 to 21.5
from Aerotech, Inc.
Design Features. High output force in an 86.4 mm x 34.3 mm cross section. Continuous force to 250.0 N (56.2 lb); peak force to 999.8 N (224.8 lb). High-energy rare-earth magnets used in magnet tracks for high acceleration capability. Non-magnetic forcer provides high force with zero cogging for... [See More]
- Linear Motor Type: Moving Coil
- Peak Force: 97.9 to 224.8
- Continuous Thrust: 15.6 to 56.2
- Continuous Current: 2.2 to 8.91
from Ningbo Kepo Electronics Co., Ltd.
Kepo customizes Z -direction linear motors for push-buttons and touchscreens in all dimensions. The products are of strong F0 stability, high-temperature resistance (150 °C), large acceleration, high peak value (3.20g), good reliability, and wide vibration frequency. Features: Strong F0... [See More]
- Linear Motor Type: Moving Coil
- Maximum Acceleration: 1.4
from Kollmorgen Corporation
ICD Series Ironcore motors feature a low-profile design and low attractive force, and are a suitable replacement for many ironless applications. They provide the highest force per frame size and feature a patented anti-cogging design for smooth operation. Our co-engineering capabilities allow us to... [See More]
- Linear Motor Type: Moving Coil
- Peak Force: 37.1 to 247.0
- Continuous Thrust: 12.8 to 70.8
- Maximum Acceleration: 10.0
from Aerotech, Inc.
Design Features. Compact size for tight space constraints; 57.2 mm x 31.8 mm cross section. Continuous force to 184.0 N (41.4 lb); peak force to 736.0 N (165.5 lb). Non-magnetic forcer coil provides high force with zero cogging for super-smooth velocity and position control. Optional cooling for... [See More]
- Linear Motor Type: Moving Coil
- Peak Force: 67.6 to 165.5
- Continuous Thrust: 10.0 to 41.4
- Continuous Current: 4.5 to 6.5
from Kollmorgen Corporation
Increase productivity and reduce operating costs - with the ICH linear motors from Kollmorgen you considerably improve overall equipment effectiveness. Eliminate the costs for maintenance work out of your calculations! Linear direct drives from Kollmorgen increase throughput by up to 40% compared... [See More]
- Linear Motor Type: Moving Coil
- Peak Force: 91.0 to 2860.8
- Continuous Thrust: 39.3 to 1200.7
- Maximum Acceleration: 14.9 to 25.0
from Aerotech, Inc.
Design Features. Non-magnetic forcer provides high force with zero cogging for super-smooth velocity and position control. Continuous force to 112.1 N (25.2 lb); peak force to 448.4 N (100.8 lb). Unlimited travel length by stacking magnet tracks. High-energy, rare-earth magnets used in magnet track... [See More]
- Linear Motor Type: Moving Coil
- Peak Force: 16.8 to 100.8
- Continuous Thrust: 4.2 to 25.2
- Continuous Current: 2.6 to 6
from Kollmorgen Corporation
Kollmorgen IL Series Direct Drive Linear ironless motors have no slots for the coil windings. This design provides a very light mass, zero attractive forces between the coil assembly and the magnet way, and zero cogging. These motors are ideal for applications requiring very low bearing friction,... [See More]
- Linear Motor Type: Moving Coil
- Peak Force: 27.0 to 359.7
- Continuous Thrust: 6.8 to 58.9
- Maximum Acceleration: 4.6 to 11.7
from Aerotech, Inc.
Design Features. Slotless magnetic forcer to improve force production with reduced cogging. Continuous force to 159.4 N (35.8 lb); peak force to 637.7 N (143.4 lb). Unlimited travel length by stacking magnet tracks. High-energy, rare-earth magnets used in magnet track for high acceleration... [See More]
- Linear Motor Type: Moving Coil
- Peak Force: 25.2 to 143.4
- Continuous Thrust: 6.3 to 35.8
- Continuous Current: 2.6 to 6
from Aerotech, Inc.
Design Features. Steel-core forcer provides high force per unit volume. Continuous force to 697.1 N (156.7 lb); peak force to 1507.2 N (338.8 lb). Unlimited travel length by stacking magnet tracks. High-energy, rare-earth magnets used in magnet track for high acceleration capability. Optional water... [See More]
- Linear Motor Type: Moving Coil
- Peak Force: 157.2 to 338.8
- Continuous Thrust: 39.3 to 156.7
- Continuous Current: 4.57 to 36.45
from Aerotech, Inc.
Design Features. 70% greater continuous output force in the same physical envelope than competitive models. Continuous forces up to 548.8 N (123.4 lb); peak forces to 2195 N (493.5 lb). Special magnet options available for increased force output. 114.1 mm high x 50.8 mm wide cross section [See More]
- Linear Motor Type: Moving Coil
- Peak Force: 231.3 to 493.4
- Continuous Thrust: 33.7 to 123.4
- Continuous Current: 2.2 to 10.96
from Aerotech, Inc.
Design Features. Ultra-compact size for tight space constraints; 52.0 mm x 20.8 mm cross section. Continuous force to 58.0 N (13.0 lb); peak force to 231.8 N (52.1 lb). Non-magnetic forcer provides high force with zero cogging for super-smooth velocity and position control. Ideal for pick-and-place... [See More]
- Linear Motor Type: Moving Coil
- Peak Force: 28.2 to 52.1
- Continuous Thrust: 4.1 to 13.0
- Continuous Current: 2.88 to 4.19
from Aerotech, Inc.
Design Features. 49% greater continuous output force in the same physical envelope than competitive models. Continuous force to 1063 N (239 lb); peak force to 4252 N (956 lb). 152.0 mm high x 50.8 mm wide cross section. Special magnet options available for increased force output [See More]
- Linear Motor Type: Moving Coil
- Peak Force: 873.8 to 955.8
- Continuous Thrust: 120.7 to 239.0
- Continuous Current: 3.58 to 21.21