Military / Government (MIL-SPEC / GG) Thread Lockers and Retainers
from Hernon Manufacturing, Inc.
Self Locker 523 is a pre-applied micro-encapsulated adhesive for threaded fasteners. Self Locker 523 stays dry-to-the-touch until the shearing action of an engaging nut applied to the coated bolt causes the capsules to break allowing the adhesive to cure. This material securely locks and seals... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Compound Type: Adhesive
from Hernon Manufacturing, Inc.
Cylinlock ® 34323 is a fast curing, high-strength anaerobic adhesive yielding higher shear strengths with temperature resistance up to 300 °F (149 °C) It provides relatively quick cures, outstanding solvent resistance, and improved reliability for metal service applications. [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Compound Type: Adhesive
from Hernon Manufacturing, Inc.
Cylinlock ® 52631 is a single component, anaerobic retaining adhesive designed for the bonding of cylindrical parts. The product cures when confined in the absence of air between close-fitting metal surfaces. [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Single Component
- Compound Type: Adhesive
from Hernon Manufacturing, Inc.
Cylinlock ® 822 is a high performance, single component, 100% active anaerobic adhesive/sealant formulated for dependable bonding of fitted cylindrical parts. Cylinlock ® 822 offers high strength as well as superior heat and chemical resistant bonding at room temperature. Cylinlock ®... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Single Component
- Compound Type: Adhesive
from Hernon Manufacturing, Inc.
Cylinlock ® 824 is a general purpose, single-component, anaerobic adhesive used primarily for joining cylindrical assemblies of all types. It is a low viscosity, self-hardening adhesive that cures when confined between ferrous or copper alloy metals. The cured adhesive is a thermoset plastic... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Thermoset; Single Component
- Compound Type: Adhesive
from Hernon Manufacturing, Inc.
Cylinlock ® 827 is a single component anaerobic retaining adhesive for cylindrical joints. The product cures when confined in the absence of air between close fitting metal surfaces. This product develops medium strength to facilitate disassembly. [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Single Component
- Compound Type: Adhesive
from Hernon Manufacturing, Inc.
Cylinlock ® 842 is a high temperature, high strength anaerobic adhesive designed to retain and seal cylindrical assemblies. This compound will cure on metallic or non-metallic substrates and is suitable for exposure to most solvents. [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Substrate Compatibility: Metal; Metallic or non-metallic substrates
- Compound Type: Adhesive
from Hernon Manufacturing, Inc.
Cylinlock ® 843 is a fast curing, high strength anaerobic adhesive yielding higher shear strengths with temperature resistance up to 300 °F (149 °C) It provides relatively quick cures, outstanding solvent resistance, and improved reliability for metal service applications. Flexible... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Compound Type: Adhesive
from Hernon Manufacturing, Inc.
Cylinlock ® 845 is a fast curing, high strength anaerobic adhesive designed to retain and seal cylindrical assemblies. This compound will cure on metallic or non-metallic substrates and is suitable for exposure to most solvents and withstands temperatures of 300 °F (149 °C). Hernon... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Substrate Compatibility: Metal; Metallic or non-metallic substrates
- Compound Type: Adhesive
- Cure / Technology: Room Temperature Vulcanizing or Curing
from Hernon Manufacturing, Inc.
Cylinlock ® 846 is a fast-curing, high-strength anaerobic adhesive yielding higher shear strengths with temperature resistance up to 300 °F (149 °C). It provides relatively quick cures, outstanding solvent resistance, and improved reliability for metal service applications. Certified... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Compound Type: Adhesive
from Hernon Manufacturing, Inc.
Cylinlock ® 847 is a high temperature, high strength anaerobic adhesive designed to retain and seal cylindrical assemblies. This compound will cure on metallic or non-metallic substrates and is suitable for exposure to most solvents. [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Substrate Compatibility: Metal; Metallic or non-metallic substrates
- Compound Type: Adhesive
from Hernon Manufacturing, Inc.
Cylinlock ® 94953 is a high-temperature, high strength anaerobic adhesive designed to retain and seal cylindrical assemblies. This compound will cure on metallic or non-metallic substrates and is suitable for exposure to most solvents. [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Substrate Compatibility: Metal; Metallic or non-metallic substrates
- Compound Type: Adhesive
from Hernon Manufacturing, Inc.
UV Curable Cylinlock ® 820 is a fast curing, high-strength anaerobic adhesive designed to retain and seal cylindrical assemblies. Curing occurs when adhesive is confined between mating surfaces. The cured adhesive is a thermoset plastic suitable for exposure to most solvents. Augments or... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Thermoset; Room Temperature Vulcanizing or Curing
- Compound Type: Adhesive; Sealant
from Hernon Manufacturing, Inc.
Hernon ® 525 is a pre-applied, micro-encapsulated adhesive for threaded fasteners. Hernon ® 525 stays on the bolt until the shearing action of an engaging nut applied to the coated bolt causes the capsules to break allowing the adhesive to cure. This material securely locks and seals... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Compound Type: Adhesive
from Hernon Manufacturing, Inc.
Nuts N ’ Bolts ® 128 is a single component, low strength thread locker designed for locking plastic and metal fasteners. Fixture time is about 5 minutes and adhesive can be pre or post applied. Any excess adhesive on the surface will cure and will not migrate to the other parts. Nuts N... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Single Component
- Compound Type: Adhesive
from Hernon Manufacturing, Inc.
Nuts N ’ Bolts ® 220 is a single component, high strength, anaerobic compound used to lock and seal fine threaded nuts, bolts, and studs in a wide variety of applications. [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Single Component
from Nylok Corporation
Precote ® 80 are varnish-like, solvent free coating systems based on micro-encapsulated acrylates for sealing and locking of threaded parts. The dried film is tack-free, non sticky and can be used in all kind of assembly procedures. Its characteristics as a locking and sealing element become... [See More]
- Industry: Automotive; Military
- Use Temperature: -76 to 338
- Substrate Compatibility: Metal
from Henkel Corporation - Industrial
Surface Preparation - activator. Solvent-based. Low temperature curing. LOCTITE ® SF 7649 is designed to promote the curing speed of LOCTITE anaerobic adhesives and sealants without any significant loss of joint strength. It is especially recommended for applications with passive metals or... [See More]
- Industry: Military
- Cure / Technology: Anaerobic
- Compound Type: Adhesive; Sealant
- Chemical System: Acrylic
from Nylok Corporation
Precote ® 85 are varnish-like, solvent free coating systems based on micro-encapsulated acrylates for sealing and locking of threaded parts. The dried film is tack-free, non sticky and can be used in all kind of assembly procedures. Its characteristics as a locking and sealing element become... [See More]
- Industry: Automotive; Military
- Use Temperature: -58 to 338
- Substrate Compatibility: Metal
from Henkel Corporation - Industrial
Anaerobic dimethacrylate ester acrylic threadlocker used to lock and seal large coarse threaded nuts, bolts and studs in a variety of applications. LOCTITE ® 087 (Letter Grade AV) is a red, fluorescent, anaerobic dimethacrylate ester acrylic threadlocker used to lock and seal large coarse... [See More]
- Industry: Military
- Cure / Technology: Anaerobic
from Nylok Corporation
Precote ® 30 varnish-like, solvent free coating systems based on micro-encapsulated acrylates for sealing and locking of threaded parts. The dried film is tack-free, non sticky and can be used in all kind of assembly procedures, particularly for series production. Its characteristics as a... [See More]
- Industry: Aerospace; Automotive; Military
- Use Temperature: -76 to 302
- Substrate Compatibility: Metal
from Henkel Corporation - Industrial
Dimethacrylate ester acrylic threadlocker designed for the locking and sealing of threaded fasteners which require normal disassembly. LOCTITE ® 220 is a blue, fluorescent, dimethacrylate ester acrylic threadlocker designed for the locking and sealing of threaded fasteners which require normal... [See More]
- Industry: Military
- Chemical System: Acrylic
- Cure / Technology: Anaerobic; Single Component
- Type / Form: Liquid
from Henkel Corporation - Industrial
LOCTITE ® 222MS ™ Low Strength, Small Screw, Mil-Spec Purple Threadlocker is ideal for fastener diameters of 1/4" (6mm) and smaller. Its controlled lubricity allows for accurate clamp loads. Parts can be separated using hand tools. Mil Spec: Mil-S-46163A Type II Grade M. NSF... [See More]
- Industry: Military
- Use Temperature: 65 to 300
from Henkel Corporation - Industrial
Medium strength, medium viscosity thixotropic threadlocking adhesive for metal thread sizes up to M36. LOCTITE ® 242 is a medium strength, medium viscosity, methacrylate-based threadlocking adhesive offering general purpose qualities. The product provides quick fixture times on steel, brass and... [See More]
- Industry: Military
- Substrate Compatibility: Metal
- Compound Type: Adhesive
- Viscosity: ? to 1600
from Henkel Corporation - Industrial
Red, high strength, high viscosity methacrylate-based threadlocking adhesive, suited to large threads. Fluoresces to allow monitoring. LOCTITE ® 277 is a red, high strength, high viscosity, methacrylate-based threadlocking adhesive. It has a fixture time on steel of 30 min, brass 25 min and... [See More]
- Industry: Military
- Substrate Compatibility: Metal
- Compound Type: Adhesive
- Viscosity: ? to 8000
from Henkel Corporation - Industrial
Threadlocking adhesive - medium/ high strength. Ideal for locking preassembled fasteners. LOCTITE ® 290 is a liquid medium/high-strength threadlocker designed for the locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged... [See More]
- Industry: Military
- Substrate Compatibility: Metal
- Compound Type: Adhesive
- Use Temperature: 65 to 300