RF Terminator Electrical Terminations
from kTB Solutions
kTB Solutions supplies broadband and high power coaxial terminations cover the frequency range DC~67GHz. The average power handling is up to 500 watts. The terminations are widely used in many applications. Features: Low VSWR. High Power. Broadband. Applications: Transmitters. Antennas. Laboratory... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 18000
- Connector Type: SMA; SMA, SSMA
- Power: 1
from RS Components, Ltd.
Telegartner J01006A1268 RF Terminator [See More]
- Terminator Type: RF Terminator
- Frequency Range: 4000
- Connector Type: Bnc
from KRYTAR, Inc.
KRYTAR specializes in the design and manufacturing of ultra-broadband, high performance microwave components and test equipment for both commercial and military space applications. KRYTAR now offers a wide selection of components for your quantum/cryogenic designs – using materials optimized... [See More]
- Terminator Type: RF Terminator; Coaxial Terminator
- Connector Type: 3.5mm
from 5o.com
Engineered to operate cover DC-26.5GHz, up to 2000W power. Built to the rigorous standards required for commercial implementations, military and space. Boasts a performance trio of low insertion loss, high isolation, and robust power handling. Custom design is available upon request. [See More]
- Terminator Type: RF Terminator; Coaxial Terminator
- Connector Type: 7-16; 7/16
- Category / Application: General Purpose Terminator
- Frequency Range: 0.0 to 3000
from Marki Microwave LLC
The TF50-110M is a well-matched, mmWave 50? termination in our connectorized M-package enabling operation from DC to 110 GHz. Passive GaAs MMIC technology allows for production of smaller constructions that replace larger form factor circuit board constructions. Tight fabrication tolerances result... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 110000
from Richardson RFPD
Richardson RFPD, an Arrow Company, is a specialized electronic component distributor providing design engineers with deep technical expertise and localized global design support for the latest new products from the world's leading suppliers of RF, Wireless, Energy and Power Technologies. [See More]
- Terminator Type: RF Terminator
- Power: 10
- Frequency Range: 4000
- VSWR: 1.25
from UIY Inc.
10W 8GHz – Coaxial Termination [See More]
- Terminator Type: RF Terminator; Coaxial Terminator
- Frequency Range: 8000
- Connector Type: SMA; SMA
- Power: 10
from RS Components, Ltd.
Telegartner J01006A1269 RF Terminator [See More]
- Terminator Type: RF Terminator
- Frequency Range: 4000
- Connector Type: Bnc
from KRYTAR, Inc.
KRYTAR offers a wide selection of extremely rugged, 50 Ohm mechanical Coaxial Terminations. Coaxial Terminations are useful when terminating unused ports, on isolated ports of hybrids and combiners, and to protect devices from signal reflections. KRYTAR ’s terminations are designed to be used... [See More]
- Terminator Type: RF Terminator; Coaxial Terminator
- Frequency Range: 0.0 to 20000
- Connector Type: 3.5mm
from Marki Microwave LLC
The TM50-110M is a well-matched, mmWave 50? termination in our connectorized M-package enabling operation from DC to 110 GHz. Passive GaAs MMIC technology allows for production of smaller constructions that replace larger form factor circuit board constructions. Tight fabrication tolerances result... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 110000
from Richardson RFPD
Richardson RFPD, an Arrow Company, is a specialized electronic component distributor providing design engineers with deep technical expertise and localized global design support for the latest new products from the world's leading suppliers of RF, Wireless, Energy and Power Technologies. [See More]
- Terminator Type: RF Terminator
- Power: 100
- Frequency Range: 6000
- VSWR: 1.20
from RS Components, Ltd.
Radiall R4041D1000 RF Terminator [See More]
- Terminator Type: RF Terminator; Coaxial Terminator
- Connector Type: Coaxial
from KRYTAR, Inc.
KRYTAR offers a wide selection of extremely rugged, 50 Ohm mechanical Coaxial Terminations. Coaxial Terminations are useful when terminating unused ports, on isolated ports of hybrids and combiners, and to protect devices from signal reflections. KRYTAR ’s terminations are designed to be used... [See More]
- Terminator Type: RF Terminator; Coaxial Terminator
- Frequency Range: 0.0 to 67000
- Connector Type: 1.85mm
from Richardson RFPD
Richardson RFPD, an Arrow Company, is a specialized electronic component distributor providing design engineers with deep technical expertise and localized global design support for the latest new products from the world's leading suppliers of RF, Wireless, Energy and Power Technologies. [See More]
- Terminator Type: RF Terminator
- Power: 20
- Frequency Range: 6000
- VSWR: 1.25
from RS Components, Ltd.
2 leg straight SMT coax cable terminator [See More]
- Terminator Type: RF Terminator
- Connector Type: Smt
from KRYTAR, Inc.
KRYTAR has developed a line of End Launch Terminations featuring a unique, patent-pending, integrated termination eliminating the additional cost and complexity of typical coaxial terminations. End Launch connectors are mechanical designs where a coaxial connector is used to connect a cable to a... [See More]
- Terminator Type: RF Terminator; End Launch Terminator
- VSWR: 1.00 to 1.20
- Frequency Range: 0.0 to 27000
from Richardson RFPD
Richardson RFPD, an Arrow Company, is a specialized electronic component distributor providing design engineers with deep technical expertise and localized global design support for the latest new products from the world's leading suppliers of RF, Wireless, Energy and Power Technologies. [See More]
- Terminator Type: RF Terminator
- Power: 250
- Frequency Range: 3000
- VSWR: 1.30
from RS Components, Ltd.
Amphenol RF 132360 RF Terminator [See More]
- Terminator Type: RF Terminator
- Connector Type: Sma
from KRYTAR, Inc.
KRYTAR has developed a line of End Launch Terminations featuring a unique, patent-pending, integrated termination eliminating the additional cost and complexity of typical coaxial terminations. End Launch connectors are mechanical designs where a coaxial connector is used to connect a cable to a... [See More]
- Terminator Type: RF Terminator; End Launch Terminator
- VSWR: 1.00 to 1.20
- Frequency Range: 0.0 to 27000
from Richardson RFPD
Richardson RFPD, an Arrow Company, is a specialized electronic component distributor providing design engineers with deep technical expertise and localized global design support for the latest new products from the world's leading suppliers of RF, Wireless, Energy and Power Technologies. [See More]
- Terminator Type: RF Terminator
- Power: 16
- Frequency Range: 3000
- VSWR: 1.25
from RS Components, Ltd.
TE Connectivity 1-1337463-0 [See More]
- Terminator Type: RF Terminator
- Connector Type: Bnc
from KRYTAR, Inc.
KRYTAR has developed a line of End Launch Terminations featuring a unique, patent-pending, integrated termination eliminating the additional cost and complexity of typical coaxial terminations. End Launch connectors are mechanical designs where a coaxial connector is used to connect a cable to a... [See More]
- Terminator Type: RF Terminator; End Launch Terminator
- VSWR: 1.40 to ?
- Frequency Range: 0.0 to 40000
from Richardson RFPD
The A16A50X4 is high performance Alumina (Al2O3) chip termination intended as a low cost alternative to Beryllium Oxide (BeO) and Aluminum Nitride (AlN). The termination is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The medium power handling makes the... [See More]
- Terminator Type: RF Terminator
- Power: 16
- Frequency Range: 4000
- VSWR: 1.12
from RS Components, Ltd.
TE Connectivity 1-1337463-0 [See More]
- Terminator Type: RF Terminator
- Connector Type: Bnc
from KRYTAR, Inc.
KRYTAR has developed a line of End Launch Terminations featuring a unique, patent-pending, integrated termination eliminating the additional cost and complexity of typical coaxial terminations. End Launch connectors are mechanical designs where a coaxial connector is used to connect a cable to a... [See More]
- Terminator Type: RF Terminator; End Launch Terminator
- VSWR: 1.50 to ?
- Frequency Range: 0.0 to 50000
from Richardson RFPD
Surface Mount Termination 10 Watts, 50?. The C20A50Z4 is high performance Alumina (Al2O3) surface mount termination intended as a cost competitive alternative to Aluminum Nitride (AlN). The termination is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The... [See More]
- Terminator Type: RF Terminator
- Power: 20
- Frequency Range: 4000
- VSWR: 1.11
from RS Components, Ltd.
BNC Terminator plug 50ohm [See More]
- Terminator Type: RF Terminator
- Connector Type: Bnc
from KRYTAR, Inc.
KRYTAR specializes in the design and manufacturing of ultra-broadband, high performance microwave components and test equipment for both commercial and military space applications. Products manufactured for Space Applications undergo additional reliability and quality assurance inspections during... [See More]
- Terminator Type: RF Terminator; Coaxial Terminator
- Frequency Range: ? to 20000
- Connector Type: 3.5mm
from Richardson RFPD
High Power Resistive Products. [See More]
- Terminator Type: RF Terminator
- Power: 20
- Frequency Range: 6000
- VSWR: 1.15
from RS Components, Ltd.
Amphenol RF 000-46650-51RFX [See More]
- Terminator Type: RF Terminator; Coaxial Terminator
- Connector Type: Coaxial
from KRYTAR, Inc.
KRYTAR specializes in the design and manufacturing of ultra-broadband, high performance microwave components and test equipment for both commercial and military space applications. Products manufactured for Space Applications undergo additional reliability and quality assurance inspections during... [See More]
- Terminator Type: RF Terminator; Coaxial Terminator
- Frequency Range: ? to 20000
- Connector Type: 3.5mm
from Richardson RFPD
High Power Resistive Products. [See More]
- Terminator Type: RF Terminator
- Power: 20
- Frequency Range: 6000
- VSWR: 1.15
from RS Components, Ltd.
Rosenberger 18K15R-0.5E3 RF Terminator [See More]
- Terminator Type: RF Terminator
- Power: 0.5000
- Frequency Range: 40000
from KRYTAR, Inc.
KRYTAR specializes in the design and manufacturing of ultra-broadband, high performance microwave components and test equipment for both commercial and military space applications. Products manufactured for Space Applications undergo additional reliability and quality assurance inspections during... [See More]
- Terminator Type: RF Terminator; Coaxial Terminator
- Frequency Range: ? to 26500
- Connector Type: 3.5mm
from Richardson RFPD
High Power Resistive Products. [See More]
- Terminator Type: RF Terminator
- Power: 20
- Frequency Range: 18000
- VSWR: 1.15
from RS Components, Ltd.
Rosenberger 19K15R-001E4 RF Terminator [See More]
- Terminator Type: RF Terminator
- Power: 1
- Frequency Range: 18000
from KRYTAR, Inc.
KRYTAR specializes in the design and manufacturing of ultra-broadband, high performance microwave components and test equipment for both commercial and military space applications. Products manufactured for Space Applications undergo additional reliability and quality assurance inspections during... [See More]
- Terminator Type: RF Terminator; Coaxial Terminator
- Frequency Range: ? to 40000
- Connector Type: 2.4mm
from Richardson RFPD
High Power Resistive Products. [See More]
- Terminator Type: RF Terminator
- Power: 60
- Frequency Range: 6000
- VSWR: 1.20
from RS Components, Ltd.
Rosenberger 32S15R-0.5E3 RF Terminator [See More]
- Terminator Type: RF Terminator
- Frequency Range: 12400
- Connector Type: SMA; SMA
from KRYTAR, Inc.
KRYTAR specializes in the design and manufacturing of ultra-broadband, high performance microwave components and test equipment for both commercial and military space applications. Products manufactured for Space Applications undergo additional reliability and quality assurance inspections during... [See More]
- Terminator Type: RF Terminator; Coaxial Terminator
- Frequency Range: ? to 40000
- Connector Type: 2.4mm
from Richardson RFPD
High Power Resistive Products. [See More]
- Terminator Type: RF Terminator
- Power: 60
- Frequency Range: 6000
- VSWR: 1.20
from RS Components, Ltd.
TNC Terminator Plug 1 Watt Without Chain [See More]
- Terminator Type: RF Terminator
- Connector Type: TNC; TNC
from Richardson RFPD
High Power Resistive Products. [See More]
- Terminator Type: RF Terminator
- Power: 100
- Frequency Range: 2500
- VSWR: 1.15
from RS Components, Ltd.
Terminating resistor, 50 ohm, N-type (ma [See More]
- Terminator Type: RF Terminator
- Connector Type: Type N
from Richardson RFPD
High Power Resistive Products. [See More]
- Terminator Type: RF Terminator
- Power: 60
- Frequency Range: 5000
- VSWR: 1.20
from RS Components, Ltd.
Radiall R404101000W RF Terminator [See More]
- Terminator Type: RF Terminator
- Connector Type: Sma
from Richardson RFPD
High Power, Flange Mount Termination [See More]
- Terminator Type: RF Terminator
- Power: 75
- Frequency Range: 4000
- VSWR: 1.25
from RS Components, Ltd.
Huber+Suhner 65_SMA-50-0-36/111_NE [See More]
- Terminator Type: RF Terminator
- Frequency Range: 18000
- Connector Type: SMA; SMA
- Power: 1
from Richardson RFPD
High Power Resistive Products. [See More]
- Terminator Type: RF Terminator
- Power: 100
- Frequency Range: 6000
- VSWR: 1.10
from RS Components, Ltd.
Huber+Suhner 6701.01.B BNC Connector [See More]
- Terminator Type: RF Terminator
- Frequency Range: 1000
- Connector Type: BNC; BNC
- Power: 0.4000
from Richardson RFPD
High Power Resistive Products. [See More]
- Terminator Type: RF Terminator
- Power: 100
- Frequency Range: 6000
- VSWR: 1.10
from RS Components, Ltd.
Radiall R404111000 RF Terminator [See More]
- Terminator Type: RF Terminator
- Connector Type: Bnc
from Richardson RFPD
High Power Resistive Products. [See More]
- Terminator Type: RF Terminator
- Power: 150
- Frequency Range: 1100
- VSWR: 1.15
from RS Components, Ltd.
Radiall R404121000 RF Terminator [See More]
- Terminator Type: RF Terminator
- Connector Type: Tnc
from Richardson RFPD
High Power Resistive Products. [See More]
- Terminator Type: RF Terminator
- Power: 150
- Frequency Range: 4000
- VSWR: 1.20
from RS Components, Ltd.
Yuetsu 090-0510 Coaxial Termination [See More]
- Terminator Type: RF Terminator
- Connector Type: Bnc plug to bnc socket
from Richardson RFPD
High Power Resistive Products. [See More]
- Terminator Type: RF Terminator
- Power: 150
- Frequency Range: 4000
- VSWR: 1.25
from SV Microwave, Inc.
NSME TERMINATION [See More]
- Terminator Type: RF Terminator
- Connector Type: NSME
from Pasternack
PE6830 100 Watts high power waveguide load (also known as waveguide termination) has a WR-51 input. This Pasternack WR-51 waveguide load / termination is rated for a minimum frequency of 15 GHz and a maximum frequency of 22 GHz. Our WR-51 waveguide terminator has a maximum input power of 100 Watts. [See More]
- Terminator Type: RF Terminator; Waveguide
- Power: 100
- Frequency Range: 15000 to 22000
- VSWR: 1.10
from Anaren, Inc.
Anaren's chip terminations line is ideal for applications that demand high power capability. Our chip termination devices provide high power dissipation when mounted to an appropriate heat sink. Chip devices from Anaren are manufactured using a thick film process. Our chip terminations feature a... [See More]
- Terminator Type: RF Terminator; Chip Terminator
- Frequency Range: 0.0 to 6000
- Category / Application: Telecom
- Power: 10
from Gem Electronics
BNC Resistor Termination. Impedance: 50 Ohm. Note: 'TP' at the end of our part numbers indicate that there are 10 peices per bag, 'Ten Pack' [See More]
- Terminator Type: RF Terminator; Coaxial Terminator
- Connector Type: BNC
from VAST STOCK CO., LIMITED
RF Terminators RESIS TERM CAP ADAPT [See More]
- Terminator Type: RF Terminator
from JFW Industries, Inc.
Model 50T-605 is a 50 Ohm termination (aka dummy load) that operates DC-6 GHz and is rated at 2 Watt RF input power. It is available with 4.3/10 male or 4.3/10 female RF connectors. [See More]
- Terminator Type: RF Terminator
- Frequency Range: 6000
- Connector Type: 4.3/10
- Power: 2
from Fairview Microwave Inc.
RF load / termination (also known as a dummy load) part number ST1023J from Fairview Microwave is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, defense /... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 4000
- Connector Type: 1.0/2.3
- Power: 1
from Picosecond Pulse Labs, Inc.
Features. Properly Terminates ECL Logic Circuits (-3.3 V or -5.2 V). DC to 10 GHz Operating Range. PECL Terminators Available. Applications. High Speed Logic Testing. The Picosecond Advantage: Signals from ECL logic ICs are specified to be terminated into 50 Ohm returned to VTT. Most test... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 10000
- Connector Type: SMA
from ZTS Technologies Co., Ltd
ZTS Type N Fixed Attenuators of 2 to 10 Watts are up to 18GHz max. Typical frequency DC-4GHz, DC-6GHz, DC-8.5GHz, DC-12.4GHz, DC-18GHz. Male or female are available upon request. Application. Wireless. SatCom. Radar systems. Test & Measurement. Commercial & Military communication [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 12400
- Connector Type: Type N; N male or female
- Power: 10
from Electro Standards Laboratories
Available in RG-58, RG-59, or RG-62 [See More]
- Terminator Type: RF Terminator; Coaxial Terminator
- Connector Type: BNC
- Category / Application: General Purpose Terminator
from L-com, Inc.
L-com's innovative splitter design gives you up to five RJ45 ports in a minimum of space. One end mounted RJ45 jack is connected via an integral circuit board to four other RJ45 jacks. Two different wiring tables are offered as standard products including a fully populated straight through version... [See More]
- Terminator Type: RF Terminator
from SV Microwave, Inc.
SSMA series are micro-miniature, precision connectors with excellent electrical performance DC to 26 GHz. The SSMA connector is a smaller version of the SMA connector and is widely used in microwave communications. The SSMA connector has stainless steel construction that provides mechanical... [See More]
- Terminator Type: RF Terminator
- Connector Type: SSMA
from Anaren, Inc.
Features: DC – 3 .0 G Hz. 30 Watts. BeO Ceramic. Non - Nichrome Resistive Element. Low VSWR. 100% Tested [See More]
- Terminator Type: RF Terminator; Chip Terminator
- Frequency Range: 0.0 to 3000
- Category / Application: Military/Instrumentation Resistive Products
- Power: 30
from Gem Electronics
BNC Resistor Termination. Impedance: 75 Ohm. Note: 'TP' at the end of our part numbers indicate that there are 10 peices per bag, 'Ten Pack' [See More]
- Terminator Type: RF Terminator; Coaxial Terminator
- Connector Type: BNC
from VAST STOCK CO., LIMITED
RF Terminators TERMINATOR PLUG 50 ohm 1 watt [See More]
- Terminator Type: RF Terminator
- Frequency Range: ? to 1000
from JFW Industries, Inc.
Model 50T-596 is a 50 Ohm termination (aka dummy load) that operates DC-50 GHz. It is available with either a male or female 2.4mm RF connector and is rated for 0.5 Watts RF input power. [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 50000
- Connector Type: 2.4mm
- Power: 0.5000
from Fairview Microwave Inc.
RF load / termination (also known as a dummy load) part number ST1023P from Fairview Microwave is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, defense /... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 4000
- Connector Type: 1.0/2.3
- Power: 1
from Picosecond Pulse Labs, Inc.
Features. Properly Terminates ECL or. PECL Logic Circuits. DC to 8 GHz Response. <20 ps Risetime. Applications. Testing High Speed ECL or. PECL Logic. Testing High Speed LVDS. Logic Circuits. The Picosecond Advantage: Signals from ECL and PECL logic ICs are specified to be terminated into 50 Ohm... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 8000
- Connector Type: SMA
from ZTS Technologies Co., Ltd
ZTS SMA Fixed Terminations of 2 to 10 Watts are up to 27GHz max. Typical frequency DC-4GHz, DC-6GHz, DC-8.5GHz, DC-12.4GHz, DC-18GHz, DC-27GHz. Male or female are available upon request. Application. Wireless. SatCom. Radar systems. Test & Measurement. Commercial & Military communication [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 12400
- Connector Type: SMA; SMA male or female
- Power: 10
from Electro Standards Laboratories
Available in RG-58, RG-59, or RG-62 [See More]
- Terminator Type: RF Terminator; Coaxial Terminator
- Connector Type: BNC
- Category / Application: General Purpose Terminator
from SV Microwave, Inc.
SMA is an acronym for SubMiniature version A and was developed in the 1960 's. Using a threaded interface, 50 Ohm SMA connectors are precision subminiature units that provide excellent electrical performance from DC to 18 GHz. These high-performance connectors are compact in size and... [See More]
- Terminator Type: RF Terminator
- Connector Type: SMA
from Anaren, Inc.
Features: DC – 2.0 G Hz. 40 Watts. BeO Ceramic. Non - Nichrome Resistive Element. Low VSWR. 100% Tested [See More]
- Terminator Type: RF Terminator; Chip Terminator
- Frequency Range: 0.0 to 2000
- Category / Application: Military/Instrumentation Resistive Products
- Power: 40
from Gem Electronics
BNC Resistor Termination. Impedance: 93 Ohm. Note: 'TP' at the end of our part numbers indicate that there are 10 peices per bag, 'Ten Pack'. [See More]
- Terminator Type: RF Terminator; Coaxial Terminator
- Connector Type: BNC
from VAST STOCK CO., LIMITED
RF Terminators 75 OHM TERMINATOR RESIS TERM CAP ADAPT [See More]
- Terminator Type: RF Terminator
- Frequency Range: ? to 4000
from JFW Industries, Inc.
Each termination from JFW is designed and manufactured to the highest quality standards. Rugged construction and competitive pricing makes every JFW termination perfect for use in OEM, base station and laboratory applications. We have thousands of terminations available with a variety of features... [See More]
- Terminator Type: RF Terminator; Coaxial Terminator
- Frequency Range: 1000
- Connector Type: BNC; Type N; SMA; TNC; 7/16
- Power: 100
from Fairview Microwave Inc.
RF load / termination (also known as a dummy load) part number ST6510C from Fairview Microwave is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, defense /... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 65000
- Connector Type: 1.85mm
- Power: 1
from Picosecond Pulse Labs, Inc.
Features. Provides proper impedance match and Termination Voltage for 3.3 V PECL logic circuits. Operates from DC to 8 GHz. Built-in Voltage regulator. Applications. Testing High Speed PECL Logic Circuits. The Picosecond Advantage: Signals from PECL logic ICs are specified to be terminated into 50... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 8000
- Connector Type: SMA
from ZTS Technologies Co., Ltd
ZTS SMA Fixed Terminations of 2 to 10 Watts are up to 27GHz max. Typical frequency DC-4GHz, DC-6GHz, DC-8.5GHz, DC-12.4GHz, DC-18GHz, DC-27GHz. Male or female are available upon request. Application. Wireless. SatCom. Radar systems. Test & Measurement. Commercial & Military communication [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 26500
- Connector Type: SMA; SMA male or female
- Power: 10
from Electro Standards Laboratories
Available in RG-58, RG-59, or RG-62 [See More]
- Terminator Type: RF Terminator; Coaxial Terminator
- Connector Type: BNC
- Category / Application: General Purpose Terminator
from SV Microwave, Inc.
Developed in the late 1950 's, the TNC stands for Threaded Neill Concelman and is named after Amphenol engineer Carl Concelman. Designed as a threaded version of the BNC, the TNC series features screw threads for mating. TNC are miniature, threaded weatherproof units with a constant impedance of... [See More]
- Terminator Type: RF Terminator
- Connector Type: TNC
from Anaren, Inc.
Features: DC – 1.0 G Hz. 150 Watts. BeO Ceramic. Non - Nichrome Resistive Element. Low VSWR. 100% Tested [See More]
- Terminator Type: RF Terminator; Chip Terminator
- Frequency Range: 0.0 to 1000
- Category / Application: Military/Instrumentation Resistive Products
- Power: 150
from Gem Electronics
F 75 Ohm Termination (0401-T75) [See More]
- Terminator Type: RF Terminator; Coaxial Terminator
- Connector Type: Type F
from VAST STOCK CO., LIMITED
RF Terminators MLE RESIS TERM CAP [See More]
- Terminator Type: RF Terminator
from JFW Industries, Inc.
Each termination from JFW is designed and manufactured to the highest quality standards. Rugged construction and competitive pricing makes every JFW termination perfect for use in OEM, base station and laboratory applications. We have thousands of terminations available with a variety of features... [See More]
- Terminator Type: RF Terminator; Coaxial Terminator
- Frequency Range: 2200
- Connector Type: BNC
- Power: 1
from Fairview Microwave Inc.
RF load / termination (also known as a dummy load) part number ST6510 from Fairview Microwave is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, defense / military,... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 65000
- Connector Type: 1.85mm
- Power: 1
from ZTS Technologies Co., Ltd
ZTS offers 2 Watts to 10 Watts mmWave Fixed Terminations with connector 2.92mm, 2.4mm, 1.85mm from 40GHz to 67GHz which is highly reliable, cost effective and short delivery time. Application. Wireless. SatCom. Radar systems. Test & Measurement. Commercial & Military communication [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 40000
- Connector Type: 2.92mm; 2.92mm male or female
- Power: 10
from SV Microwave, Inc.
Named after Paul Neill of Bell Labs after being developed in the 1940 's, the Type N offered the first true microwave performance. The Type N connector was developed to satisfy the need for a durable, weatherproof, medium-size RF connector with consistent performance through 11 GHz. There are... [See More]
- Terminator Type: RF Terminator
- Connector Type: Type N
from Anaren, Inc.
Features: DC – 1.0 G Hz. 300 Watts. BeO Ceramic. Non - Nichrome Resistive Element. Low VSWR. 100% Tested [See More]
- Terminator Type: RF Terminator; Chip Terminator
- Frequency Range: 0.0 to 1000
- Category / Application: Military/Instrumentation Resistive Products
- Power: 300
from Gem Electronics
TNC Resistor Termination. 50 Ohm Impedance [See More]
- Terminator Type: RF Terminator; Coaxial Terminator
- Connector Type: TNC
from VAST STOCK CO., LIMITED
RF Terminators MLE RESIS TERM CAP [See More]
- Terminator Type: RF Terminator
from JFW Industries, Inc.
Each termination from JFW is designed and manufactured to the highest quality standards. Rugged construction and competitive pricing makes every JFW termination perfect for use in OEM, base station and laboratory applications. We have thousands of terminations available with a variety of features... [See More]
- Terminator Type: RF Terminator; Coaxial Terminator
- Frequency Range: 1000
- Connector Type: BNC; Type N; SMA; TNC; 7/16
- Power: 50
from Fairview Microwave Inc.
RF load / termination (also known as a dummy load) part number ST5039 from Fairview Microwave is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, defense / military,... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 50000
- Connector Type: 2.4mm
- Power: 1
from ZTS Technologies Co., Ltd
ZTS BNC Fixed Terminations of 2 to 10 Watts are up to 6GHz max. Typical frequency DC-4GHz, DC-6GHz. Male or female are available upon request. Application. Wireless. SatCom. Radar systems. Test & Measurement. Commercial & Military communication [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 4000
- Connector Type: BNC; BNC male or female
- Power: 10
from SV Microwave, Inc.
SV Microwave offers a complete line of SMP bullet connectors at high frequencies up to DC to 40 GHz. The SMP bullet connector was developed to meet the need for a smaller high frequency compact design that incorporated ease of use and functionality. The SMP bullet connector is the heart of this... [See More]
- Terminator Type: RF Terminator
- Connector Type: SMP
from Anaren, Inc.
Anaren's chip terminations line is ideal for applications that demand high power capability. Our chip termination devices provide high power dissipation when mounted to an appropriate heat sink. Chip devices from Anaren are manufactured using a thick film process. Our chip terminations feature a... [See More]
- Terminator Type: RF Terminator; Chip Terminator
- Frequency Range: 0.0 to 4000
- Category / Application: Telecom; Power Combiners
- Power: 125
from Gem Electronics
TNC Resistor Termination 310-T75TP 50 Ohm [See More]
- Terminator Type: RF Terminator; Coaxial Terminator
- Connector Type: TNC
from VAST STOCK CO., LIMITED
RF Terminators BNC CONNECTOR COAX M TO F 50 OHM [See More]
- Terminator Type: RF Terminator
from JFW Industries, Inc.
Designed to match 50-Ohm and 75-Ohm RF devices with an oscilloscope or with other high-impedance test equipment, the JFW feedthru termination has been a trusted component in RF laboratories for decades. We have several models to choose from with features that include... 50 Ohm and 75 Ohm feedthru... [See More]
- Terminator Type: RF Terminator; Coaxial Terminator
- Frequency Range: 1000
- Connector Type: BNC
- Power: 1
from Fairview Microwave Inc.
RF load / termination (also known as a dummy load) part number ST5035 from Fairview Microwave is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, defense / military,... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 50000
- Connector Type: 2.4mm
- Power: 0.5000
from ZTS Technologies Co., Ltd
ZTS Type N Fixed Terminations of 50 to 250 Watts are up to 18GHz max. Typical frequency DC-4GHz, DC-6GHz, DC-8.5GHz, DC-12.4GHz, DC-18GHz,. Male or female are available upon request, custom design for dimension is also available. [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 12400
- Connector Type: Type N; N male or female
- Power: 100
from SV Microwave, Inc.
The SMC name derives from SubMiniature C (the third subminiature design). The SMC design was developed in the 1960 's. SMC has threaded coupling with 10-32 threads. The SMC connector offers the same low cost and small size as the SMB connector, but the SMC screw-on mating provides extra mating... [See More]
- Terminator Type: RF Terminator
- Connector Type: SMC
from Anaren, Inc.
Anaren's chip terminations line is ideal for applications that demand high power capability. Our chip termination devices provide high power dissipation when mounted to an appropriate heat sink. Chip devices from Anaren are manufactured using a thick film process. Our chip terminations feature a... [See More]
- Terminator Type: RF Terminator; Chip Terminator
- Frequency Range: 0.0 to 2700
- Category / Application: Telecom; Power Combiners
- Power: 150
from VAST STOCK CO., LIMITED
RF Terminators N-Type Terminator Jack 18GHz 2Watts [See More]
- Terminator Type: RF Terminator
- Standards and Certifications: RoHS
- Frequency Range: ? to 18000
from Fairview Microwave Inc.
RF load / termination (also known as a dummy load) part number ST5036 from Fairview Microwave is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, defense / military,... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 50000
- Connector Type: 2.4mm
- Power: 0.5000
from ZTS Technologies Co., Ltd
Application. Wireless. SatCom. Radar systems. Test & Measurement. Commercial & Military communication [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 3000
- Connector Type: Type N; N male or female
- Power: 1000
from SV Microwave, Inc.
SV Microwave offers a great variety of SMPM bullet connectors. Similar to the SMP bullet, these connectors are 20% smaller and have frequency ranges up to 65GHz. The SMPM connector was developed to meet the need for a smaller high frequency connector than the SMP. Like the SMP, the SMPM bullet is... [See More]
- Terminator Type: RF Terminator
- Connector Type: SMPM
from Anaren, Inc.
Anaren's chip terminations line is ideal for applications that demand high power capability. Our chip termination devices provide high power dissipation when mounted to an appropriate heat sink. Chip devices from Anaren are manufactured using a thick film process. Our chip terminations feature a... [See More]
- Terminator Type: RF Terminator; Chip Terminator
- Frequency Range: 0.0 to 3000
- Category / Application: Telecom; Power Combiners
- Power: 150
from VAST STOCK CO., LIMITED
RF Terminators N-Type Terminator Plug 18GHz 2Watts [See More]
- Terminator Type: RF Terminator
- Standards and Certifications: RoHS
- Frequency Range: ? to 18000
from Fairview Microwave Inc.
RF load / termination (also known as a dummy load) part number ST5038C from Fairview Microwave is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, defense /... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 50000
- Connector Type: 2.4mm
- Power: 1
from ZTS Technologies Co., Ltd
ZTS Type N Fixed Terminations of 50 to 250 Watts are up to 18GHz max. Typical frequency DC-4GHz, DC-6GHz, DC-8.5GHz, DC-12.4GHz, DC-18GHz,. Male or female are available upon request, custom design for dimension is also available. [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 12400
- Connector Type: Type N; N male or female
- Power: 150
from SV Microwave, Inc.
The next generation in miniature connectors and SV Microwave ’s RFffortless is the SMPS. The SMPS furthers SVs threadless designs of push-on and blindmate connectors and is capable of frequencies exceeding 100 GHz. Being 45% smaller than the SMP and 30% smaller then the SMPM, the SMPS is ideal... [See More]
- Terminator Type: RF Terminator
- Connector Type: SMPS
from Anaren, Inc.
Anaren's chip terminations line is ideal for applications that demand high power capability. Our chip termination devices provide high power dissipation when mounted to an appropriate heat sink. Chip devices from Anaren are manufactured using a thick film process. Our chip terminations feature a... [See More]
- Terminator Type: RF Terminator; Chip Terminator
- Frequency Range: 0.0 to 3000
- Category / Application: Telecom; Power Combiners
- Power: 150
from VAST STOCK CO., LIMITED
RF Terminators TERMINATOR PLUG 50 [See More]
- Terminator Type: RF Terminator
from Fairview Microwave Inc.
RF load / termination (also known as a dummy load) part number ST5038 from Fairview Microwave is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, defense / military,... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 50000
- Connector Type: 2.4mm
- Power: 1
from ZTS Technologies Co., Ltd
ZTS SMA Fixed Terminations of 2 to 10 Watts are up to 27GHz max. Typical frequency DC-4GHz, DC-6GHz, DC-8.5GHz, DC-12.4GHz, DC-18GHz, DC-27GHz. Male or female are available upon request. Application. Wireless. SatCom. Radar systems. Test & Measurement. Commercial & Military communication [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 12400
- Connector Type: SMA; SMA male or female
- Power: 2
from SV Microwave, Inc.
The PTNC connector is SV Microwave 's precision version of the TNC and offers the user superior electrical characteristics. With a frequency range of DC to 15 GHz and tighter machine tolerances, the PTNC series is used in applications such as telecom, base stations, radars, and antennas. The... [See More]
- Terminator Type: RF Terminator
- Connector Type: PTNC
from Anaren, Inc.
Anaren's chip terminations line is ideal for applications that demand high power capability. Our chip termination devices provide high power dissipation when mounted to an appropriate heat sink. Chip devices from Anaren are manufactured using a thick film process. Our chip terminations feature a... [See More]
- Terminator Type: RF Terminator; Chip Terminator
- Frequency Range: 0.0 to 4500
- Category / Application: Telecom; Power Combiners
- Power: 15
from VAST STOCK CO., LIMITED
RF Terminators PUSH PULL PLUG 50 ohm [See More]
- Terminator Type: RF Terminator
- Frequency Range: ? to 2000
from Fairview Microwave Inc.
RF load / termination (also known as a dummy load) part number ST5041C from Fairview Microwave is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, defense /... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 50000
- Connector Type: 2.4mm
- Power: 2
from ZTS Technologies Co., Ltd
ZTS Type N Fixed Attenuators of 2 to 10 Watts are up to 18GHz max. Typical frequency DC-4GHz, DC-6GHz, DC-8.5GHz, DC-12.4GHz, DC-18GHz. Male or female are available upon request. Application. Wireless. SatCom. Radar systems. Test & Measurement. Commercial & Military communication [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 12400
- Connector Type: Type N; N male or female
- Power: 2
from SV Microwave, Inc.
The PN is SV Microwave ’s precision version of the type N which offers the user superior electrical characteristics. This series is constructed in stainless steel passivated or gold plated. The PN series meets or exceeds all parameters of MIL- PRE- 39012 Type N connectors designed to this... [See More]
- Terminator Type: RF Terminator
- Connector Type: PN
from Anaren, Inc.
Anaren's chip terminations line is ideal for applications that demand high power capability. Our chip termination devices provide high power dissipation when mounted to an appropriate heat sink. Chip devices from Anaren are manufactured using a thick film process. Our chip terminations feature a... [See More]
- Terminator Type: RF Terminator; Chip Terminator
- Frequency Range: 0.0 to 4000
- Category / Application: Telecom; Power Combiners
- Power: 16
from VAST STOCK CO., LIMITED
RF Terminators DC Block BNC plug(m) to BNC jack(f), low Power [See More]
- Terminator Type: RF Terminator
- Standards and Certifications: RoHS
from Fairview Microwave Inc.
RF load / termination (also known as a dummy load) part number ST5041 from Fairview Microwave is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, defense / military,... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 50000
- Connector Type: 2.4mm
- Power: 2
from ZTS Technologies Co., Ltd
ZTS offers 2 Watts to 10 Watts mmWave Fixed Terminations with connector 2.92mm, 2.4mm, 1.85mm from 40GHz to 67GHz which is highly reliable, cost effective and short delivery time. Application. Wireless. SatCom. Radar systems. Test & Measurement. Commercial & Military communication [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 40000
- Connector Type: 2.4mm; 2.4mm male or female
- Power: 2
from SV Microwave, Inc.
Developed in the late 1940 's as a miniature version of the Type C connector, BNC stands for Bayonet Neill Concelman and is named after Amphenol engineer Carl Concelman. The BNC connector is a miniature quick mating and de-mating RF connector. It features two bayonet lugs on the female... [See More]
- Terminator Type: RF Terminator
- Connector Type: BNC
from Anaren, Inc.
Anaren's chip terminations line is ideal for applications that demand high power capability. Our chip termination devices provide high power dissipation when mounted to an appropriate heat sink. Chip devices from Anaren are manufactured using a thick film process. Our chip terminations feature a... [See More]
- Terminator Type: RF Terminator; Chip Terminator
- Frequency Range: 0.0 to 2200
- Category / Application: Telecom; Power Combiners
- Power: 200
from VAST STOCK CO., LIMITED
RF Terminators SMA MALE SHORTING CAP [See More]
- Terminator Type: RF Terminator
- Connector Type: SMA
from Fairview Microwave Inc.
RF load / termination (also known as a dummy load) part number ST4016 from Fairview Microwave is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, defense / military,... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 40000
- Connector Type: 2.92mm
- Power: 1
from ZTS Technologies Co., Ltd
ZTS offers 2 Watts to 10 Watts mmWave Fixed Terminations with connector 2.92mm, 2.4mm, 1.85mm from 40GHz to 67GHz which is highly reliable, cost effective and short delivery time. Application. Wireless. SatCom. Radar systems. Test & Measurement. Commercial & Military communication [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 50000
- Connector Type: 2.4mm; 2.4mm male or female
- Power: 2
from SV Microwave, Inc.
The BZ connector is a high-power blindmate connector with slide-on mating. This originally designated PMA blindmate by Automatic has PTFE dielectric interface, telescoping insulators and wiping outer contacts. BZ blindmate connector applications include GPS navigation systems and antenna... [See More]
- Terminator Type: RF Terminator
- Connector Type: BZ
from Anaren, Inc.
Anaren's chip terminations line is ideal for applications that demand high power capability. Our chip termination devices provide high power dissipation when mounted to an appropriate heat sink. Chip devices from Anaren are manufactured using a thick film process. Our chip terminations feature a... [See More]
- Terminator Type: RF Terminator; Chip Terminator
- Frequency Range: 0.0 to 2200
- Category / Application: Telecom; Power Combiners
- Power: 250
from VAST STOCK CO., LIMITED
RF Terminators SMA MALE RESISTOR CAP 50 OHM [See More]
- Terminator Type: RF Terminator
- Connector Type: SMA
from Fairview Microwave Inc.
RF load / termination (also known as a dummy load) part number ST4017C from Fairview Microwave is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, defense /... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 40000
- Connector Type: 2.92mm
- Power: 1
from ZTS Technologies Co., Ltd
ZTS offers 2 Watts to 10 Watts mmWave Fixed Terminations with connector 2.92mm, 2.4mm, 1.85mm from 40GHz to 67GHz which is highly reliable, cost effective and short delivery time. Application. Wireless. SatCom. Radar systems. Test & Measurement. Commercial & Military communication [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 67000
- Connector Type: 1.85mm; 1.85mm male or female
- Power: 2
from SV Microwave, Inc.
SV Microwave offers 2.4mm connectors and components. The 2.4mm series consists of connectors designed for broadband microwave applications DC to 50 GHz. Designed for a wide range of use in the microwave industry, these connectors are manufactured with a precise tolerance interface to ensure a low... [See More]
- Terminator Type: RF Terminator
- Connector Type: 2.4mm
from Anaren, Inc.
Features: DC – 3.0 G Hz. 40 Watts. BeO Ceramic. Non - Nichrome Resistive Element. Low VSWR. 100% Tested. RoHS Compliant [See More]
- Terminator Type: RF Terminator; Chip Terminator
- Frequency Range: 0.0 to 3000
- Category / Application: Military/Instrumentation Resistive Products
- Power: 40
from VAST STOCK CO., LIMITED
RF Terminators SMA MALE RESISTOR CAP REV POL 50 OHM [See More]
- Terminator Type: RF Terminator
- Connector Type: SMA
from Fairview Microwave Inc.
RF load / termination (also known as a dummy load) part number ST4015 from Fairview Microwave is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, defense / military,... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 40000
- Connector Type: 2.92mm
- Power: 1
from ZTS Technologies Co., Ltd
ZTS SMA Fixed Terminations of 20 to 50 Watts are up to 26.5GHz max. Typical frequency DC-4GHz, DC-6GHz, DC-8.5GHz, DC-12.4GHz, DC-18GHz, DC-26.5GHz. Male or female are available upon request. Application. Wireless. SatCom. Radar systems. Test & Measurement. Commercial & Military... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 12400
- Connector Type: SMA; SMA male or female
- Power: 20
from SV Microwave, Inc.
The ZMA connector is a bayonet coupling device. The unique design of this connector provides a high coupling force, which is ideal for extreme vibration applications where insufficient room is available for spring loaded blindmate panels. This ZMA connector was first developed for an F-22 aircraft... [See More]
- Terminator Type: RF Terminator
- Connector Type: ZMA
from Anaren, Inc.
Features: DC – 6.0 G Hz. 4 Watts. BeO Ceramic. Non - Nichrome Resistive Element. Low VSWR. 100% Tested. RoHS Compliant [See More]
- Terminator Type: RF Terminator; Chip Terminator
- Frequency Range: 0.0 to 6000
- Category / Application: Military/Instrumentation Resistive Products
- Power: 4
from VAST STOCK CO., LIMITED
RF Terminators SMA FEMALE RESISTOR CAP 50 OHM [See More]
- Terminator Type: RF Terminator
- Connector Type: SMA
from Fairview Microwave Inc.
RF load / termination (also known as a dummy load) part number ST4019C from Fairview Microwave is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, defense /... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 40000
- Connector Type: 2.92mm
- Power: 2
from ZTS Technologies Co., Ltd
ZTS Type N Fixed Terminations of 20 to 50 Watts are up to 18GHz max. Typical frequency DC-4GHz, DC-6GHz, DC-8.5GHz, DC-12.4GHz, DC-18GHz. Male or female are available upon request. Application. Wireless. SatCom. Radar systems. Test & Measurement. Commercial & Military communication [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 12400
- Connector Type: Type N; N male or female
- Power: 20
from Anaren, Inc.
Anaren's chip terminations line is ideal for applications that demand high power capability. Our chip termination devices provide high power dissipation when mounted to an appropriate heat sink. Chip devices from Anaren are manufactured using a thick film process. Our chip terminations feature a... [See More]
- Terminator Type: RF Terminator; Chip Terminator
- Frequency Range: 0.0 to 1700
- Category / Application: Power Combiners
- Power: 500
from VAST STOCK CO., LIMITED
RF Terminators SMB ST TERMINATOR 316/U [See More]
- Terminator Type: RF Terminator
from Fairview Microwave Inc.
RF load / termination (also known as a dummy load) part number ST4019 from Fairview Microwave is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, defense / military,... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 40000
- Connector Type: 2.92mm
- Power: 2
from ZTS Technologies Co., Ltd
ZTS SMA Fixed Terminations of 20 to 50 Watts are up to 26.5GHz max. Typical frequency DC-4GHz, DC-6GHz, DC-8.5GHz, DC-12.4GHz, DC-18GHz, DC-26.5GHz. Male or female are available upon request. Application. Wireless. SatCom. Radar systems. Test & Measurement. Commercial & Military... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 26500
- Connector Type: SMA; SMA male or female
- Power: 20
from Anaren, Inc.
Features: DC – 4.0 G Hz. 5 Watts. BeO Ceramic. Non - Nichrome Resistive Element. Low VSWR. 100% Tested. RoHS Compliant [See More]
- Terminator Type: RF Terminator; Chip Terminator
- Frequency Range: 0.0 to 4000
- Category / Application: Military/Instrumentation Resistive Products
- Power: 5
from VAST STOCK CO., LIMITED
RF Terminators Terminator Jack (1/4W) [See More]
- Terminator Type: RF Terminator
- Standards and Certifications: RoHS
- Frequency Range: ? to 50000
from Fairview Microwave Inc.
RF load / termination (also known as a dummy load) part number ST2635-25W from Fairview Microwave is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, defense /... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 26500
- Connector Type: 3.5mm
- Power: 25
from ZTS Technologies Co., Ltd
ZTS offers 2 Watts to 10 Watts mmWave Fixed Terminations with connector 2.92mm, 2.4mm, 1.85mm from 40GHz to 67GHz which is highly reliable, cost effective and short delivery time. Application. Wireless. SatCom. Radar systems. Test & Measurement. Commercial & Military communication [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 40000
- Connector Type: 2.92mm; 2.92mm male or female
- Power: 20
from Anaren, Inc.
Features: DC – 4 GHz. 10 Watts. BeO Ceramic. Non-Nichrome Resistive Element. Low VSWR. 100% Tested [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 4000
- Category / Application: Military/Instrumentation Resistive Products
- Power: 10
from VAST STOCK CO., LIMITED
RF Terminators Terminator Plug (1/4W) [See More]
- Terminator Type: RF Terminator
- Standards and Certifications: RoHS
- Frequency Range: ? to 50000
from Fairview Microwave Inc.
RF load / termination (also known as a dummy load) part number FMTR1034 from Fairview Microwave is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, defense /... [See More]
- Terminator Type: RF Terminator
- Power: 100
- Frequency Range: 698 to 2700
- VSWR: 1.15
from ZTS Technologies Co., Ltd
ZTS Type N Fixed Terminations of 50 to 250 Watts are up to 18GHz max. Typical frequency DC-4GHz, DC-6GHz, DC-8.5GHz, DC-12.4GHz, DC-18GHz,. Male or female are available upon request, custom design for dimension is also available. [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 12400
- Connector Type: Type N; N male or female
- Power: 200
from Anaren, Inc.
Features: DC – 4.0 GHz. 10 Watts. BeO Ceramic. Non-Nichrome Resistive Element. Low VSWR. 100% Tested [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 4000
- Category / Application: Military/Instrumentation Resistive Products
- Power: 10
from VAST STOCK CO., LIMITED
RF Terminators termination [See More]
- Terminator Type: RF Terminator
- Standards and Certifications: RoHS
from Fairview Microwave Inc.
RF load / termination (also known as a dummy load) part number FMTR1022 from Fairview Microwave is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, defense /... [See More]
- Terminator Type: RF Terminator
- Power: 20
- Frequency Range: 698 to 2700
- VSWR: 1.33
from ZTS Technologies Co., Ltd
ZTS SMA Fixed Terminations of 20 to 50 Watts are up to 26.5GHz max. Typical frequency DC-4GHz, DC-6GHz, DC-8.5GHz, DC-12.4GHz, DC-18GHz, DC-26.5GHz. Male or female are available upon request. Application. Wireless. SatCom. Radar systems. Test & Measurement. Commercial & Military... [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 12400
- Connector Type: SMA; SMA male or female
- Power: 25
from Anaren, Inc.
Features: DC – 6.0 GHz. 100 Watts. BeO Ceramic. Non-Nichrome Resistive Element. Low VSWR. 100% Tested [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 6000
- Category / Application: Military/Instrumentation Resistive Products
- Power: 100
from VAST STOCK CO., LIMITED
RF Terminators right angle plug PCB [See More]
- Terminator Type: RF Terminator
- Standards and Certifications: RoHS
from Fairview Microwave Inc.
RF load / termination (also known as a dummy load) part number FMTR1026 from Fairview Microwave is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, defense /... [See More]
- Terminator Type: RF Terminator
- Power: 40
- Frequency Range: 698 to 2700
- VSWR: 1.15
from ZTS Technologies Co., Ltd
ZTS Type N Fixed Terminations of 20 to 50 Watts are up to 18GHz max. Typical frequency DC-4GHz, DC-6GHz, DC-8.5GHz, DC-12.4GHz, DC-18GHz. Male or female are available upon request. Application. Wireless. SatCom. Radar systems. Test & Measurement. Commercial & Military communication [See More]
- Terminator Type: RF Terminator
- Frequency Range: 0.0 to 12400
- Connector Type: Type N; N male or female
- Power: 25