Semi-finished Shape / Mill Stock Tungsten and Tungsten Alloys
from Elmet Technologies LLC
Molybdenum's properties include a melting point of 2610 ° C, good electrical conductivity and tensile strength at high temperatures, along with low vapor pressure and a low coefficient of thermal expansion. [See More]
- Shape / Form: Fabricated Parts or Shapes (Castings, Forgings, Machined Parts, etc.); Semi-finished, Mill Stock or Near Net Shapes; Coil Stock; Bar Stock; Round Bar or Rod Stock
- Width / OD: 0.0600
- Metal / Alloy Type: Tungsten
- Length: 72
from ATI
Tungsten-based infiltrated metals, with either copper or silver as infiltrants, have been widely used in industry for many years. The major uses include missile vector control vanes, nozzle and throat materials, missile plume deflector shields, electrical contacts, resistance welding contacts, and... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Powder, Granule or Flake
- Metal / Alloy Type: Tungsten
from Tokusen Kogyo Co., Ltd.
Properties of Wire Probe: ・Needs gold plating and isolation coating. ・The contact load is obtained by using the deflection of the wire. ・Wire characteristics affect inspection accuracy and life. Benefits of using a wire probe: ・Long life (No need springs). ・Stable... [See More]
- Shape / Form: Fabricated Parts or Shapes (Castings, Forgings, Machined Parts, etc.); Semi-finished, Mill Stock or Near Net Shapes
- Width / OD: 0.0028 to 0.0197
- Metal / Alloy Type: Tungsten
- Length: 0.7874 to 7.87
from Thermo Shield
Included in our stock of inch and metric refractory fasteners is Molybdenum (Mo or Moly), Tantalum (Ta), Tungsten (W), and Alumina (Al2O3 or AD998) screws (fillister, flat & pan head), nuts (hex, square, round with flat or double d, & round slotted), washers (flat, thin, & shoulder), threaded rod,... [See More]
- Shape / Form: Fasteners; Fabricated Parts or Shapes (Castings, Forgings, Machined Parts, etc.); Semi-finished, Mill Stock or Near Net Shapes
- Metal / Alloy Type: Tungsten
from Mi-Tech Metals
Increase productivity, improve quality and reduce downtime with Chatter Free metal. Mi-Tech Metals ’ Chatter Free material is designed for minimum vibration and outstanding rigidity. Compared to traditional tungsten carbide, our Chatter Free metal offers: higher density. superior... [See More]
- Shape / Form: Fabricated Parts or Shapes (Castings, Forgings, Machined Parts, etc.) (optional feature); Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Hollow Stock (Tube, Pipe, Column) (optional feature); Round Bar or Rod Stock
- Width / OD: 0.1250
- Metal / Alloy Type: Tungsten; Alloy
- Length: 8
from Plansee SE
PLANSEE offers a wide range of ribbons made of refractory metals and their alloys made of highly pure raw materials. Ribbons are available in thicknesses between 15 µm and 0.76 mm and widths between 1 mm and 360 mm. Ribbons made of tungsten and tantalum are availble directly from the... [See More]
- Shape / Form: Strip; Semi-finished, Mill Stock or Near Net Shapes
- Metal / Alloy Type: Tungsten
from Rhenium Alloys, Inc.
Rhenium Alloys offers Copper-Tungsten in sheet and foil. For over 45 years, Rhenium Alloys has been delivering high performance refractory metals to customers who desire an alloy that can withstand extreme temperatures and harsh environments. Typical Applications. • Aerospace Propulsion. •... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Foil; Sheet
- Applications: Aerospace or Aircraft Quality; Chemical or material processing; Electronics or semiconductors; HV / Electrical; Resistance Alloy / Heating; Wear resistant parts or tooling; Radar Systems, Components, Sputtering Targets, Heating Elements, Shields & Liners
- Metal / Alloy Type: Tungsten; Composite
from Ulbrich Stainless Steels & Special Metals, Inc.
WHAT IS TUNGSTEN?. Tungsten is a very high density refractory metal that is very resistant to corrosion. Tungsten has the highest melting point and highest tensile strength of any element, with extremely low vapor pressure even at high temperatures. Tungsten wire is used as filaments for lighting,... [See More]
- Shape / Form: Wire; Wire – Round; Semi-finished, Mill Stock or Near Net Shapes
- Specifications: ASTM / ASME
- Metal / Alloy Type: Tungsten; Pure or Very Low Alloy
- Features: Heat Resistant; Corrosion Resistant
from Ed Fagan, Inc.
Many practical applications of Tungsten are based on its high melting point, high density, dimensional stability, and its low vapor pressure. Tungsten ’s low vapor pressure at elevated temperatures makes it an excellent material for electron emitters and for electrical contact materials --... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Width / OD: 0.0250 to 7
- Metal / Alloy Type: Tungsten; Pure or Very Low Alloy
- Length: 36 to 72
from Materion Corporation
Pure Metals. Aluminum, Al. Neodymium, Nd. Antimony, Sb. Nickel, Ni. Beryllium, Be. Niobium, Nb. Bismuth, Bi. Osmium, Os. Boron, B. Palladium, Pd. Cadmium, Cd. Platinum, Pt. Calcium, Ca. Praseodymium, Pr. Carbon, C. Rhenium, Re. Cerium, Ce. Rhodium, Rh. Chromium, Cr. Ruthenium, Ru. Cobalt, Co. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes
- Applications: Electronics or semiconductors
- Metal / Alloy Type: Tungsten (optional feature); Pure or Very Low Alloy
from Elmet Technologies LLC
Material from .090 inches to 3 inches in thickness is classified as molybdenum plate. It is widely used in the construction of furnace tooling and parts and as a feed stock for the fabrication of parts for the electronics and semiconductor industries. Standard availability is described below. Other... [See More]
- Shape / Form: Fabricated Parts or Shapes (Castings, Forgings, Machined Parts, etc.); Semi-finished, Mill Stock or Near Net Shapes; Plate
- Width / OD: 12
- Metal / Alloy Type: Tungsten
- Length: 12 to 24
from Thermo Shield
Material below .005 inches in thickness is classified as tungsten refractory foil. Typical uses for it are electronic components, metallizing sources, furnace insulation/liner and chemically etched parts. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Foil
- Thickness: 1.00E-3 to 0.0040
- Metal / Alloy Type: Tungsten
from Mi-Tech Metals
Mi-Tech high-density metals are high -strength, machinable, tungsten based materials used when high density and strength are required. [See More]
- Shape / Form: Flats / Rectangular Bar (optional feature); Fabricated Parts or Shapes (Castings, Forgings, Machined Parts, etc.) (optional feature); Semi-finished, Mill Stock or Near Net Shapes; Squares (optional feature); Bar Stock; Hollow Stock (Tube, Pipe, Column) (optional feature); Round Bar or Rod Stock (optional feature)
- Features: Powder Metal Parts or Stock
- Metal / Alloy Type: Tungsten; Alloy
- Applications: Aerospace or Aircraft Quality; Automotive or Vehicular; Chemical or material processing; Oil & Gas Wells; Medical; Radiation Shielding
from Plansee SE
Buy tungsten sheets in outstanding purity and constant high quality directly from our onlineshop. There you also find an overview of all available sheet dimensions and qualities. Our experience and state-of-the-art equipment mean that we can get the very most out of our metals. Did you know that we... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Sheet
- Metal / Alloy Type: Tungsten
from Rhenium Alloys, Inc.
Tungsten alloys serve a wide range of applications in electronics, furnace, joining, and aerospace industries. Precise alloying of Rhenium with these other refractory metals adds both ductility and strength to suit customer specifications. Industries Served. • Aerospace. • Military. •... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Metal / Alloy Type: Tungsten
from Ed Fagan, Inc.
Tungsten Alloys, which contain elements such as nickel, copper and iron, produce a host of alloys which have engineering properties similar to steel, are relatively easy to machine, and can be plated or painted to enhance their corrosion protection. These alloys are approximately 50% denser than... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Width / OD: 0.0600 to 6
- Metal / Alloy Type: Tungsten; Pure or Very Low Alloy
- Length: 8 to 12
from Elmet Technologies LLC
Tungsten lamp filaments, which operate at temperatures in the range of 2400 ° C, are successfully mounted on molybdenum wires; the wire acting both as a heat sink and a support while lowering the temperature at the support junction. Likewise, molybdenum sees wide use in the construction of power... [See More]
- Shape / Form: Wire; Fabricated Parts or Shapes (Castings, Forgings, Machined Parts, etc.); Semi-finished, Mill Stock or Near Net Shapes; Coil Stock
- Width / OD: 8.00E-4 to 0.1000
- Metal / Alloy Type: Tungsten
- Features: Corrosion Resistant
from Thermo Shield
Material from .187 inches to 3 inches in thickness is classified as tungsten refractory plate. It is widely used in the construction of furnace tooling and parts and as a feed stock for the fabrication of parts for the electronics and semiconductor industries. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Plate
- Thickness: 0.1875 to 1.5
- Metal / Alloy Type: Tungsten
from Rhenium Alloys, Inc.
Tungsten Alloys provides a wide range of Wire products to serve applications in major electronics products, thermocouples, high temperature furnace parts, and welding requirements. Our Rhenium Wire is 99.99% pure and has high strength and excellent ductility. Molybdenum-47.5%-Rhenium Wire is used in... [See More]
- Shape / Form: Wire; Semi-finished, Mill Stock or Near Net Shapes
- Applications: Aerospace or Aircraft Quality; Automotive or Vehicular; Chemical or material processing; Electronics or semiconductors; HV / Electrical; Oil & Gas Wells; Resistance Alloy / Heating; Vacuum Metalization & Evaporation,, Thin Film Coatings, Automotive Lamp Reflectors, Cosmetics
- Metal / Alloy Type: Tungsten
from Thermo Shield
Tungsten rod is stocked as random length pieces or cut to customers' desired lengths. It is available in diameters ranging from .020 inches to 6.00 inches. In addition, Thermo Shield offers two different surface processes or finishes (ground or clean), depending on the desired end use. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Width / OD: 0.0100 to 0.5000
- Metal / Alloy Type: Tungsten
from Thermo Shield
Tungsten refractory screen is known under many names (Mesh, Wire Cloth, Screen Grid, & Wire Mesh). It has a high strength to weight ratio, is not subject to hydrogen embrittlement, is more ductile than tungsten and only one half as dense. [See More]
- Shape / Form: Screen; Fabricated Parts or Shapes (Castings, Forgings, Machined Parts, etc.); Semi-finished, Mill Stock or Near Net Shapes
- Width / OD: 10 to 20
- Metal / Alloy Type: Tungsten
from Thermo Shield
Material from .005 inches to .150 inches in thickness is classified as tungsten refractory sheet. It is used for fabrication of sintering boats, high temperature furnace heating elements and heat shields. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Sheet
- Thickness: 0.0050 to 0.1500
- Metal / Alloy Type: Tungsten
from Thermo Shield
Tungsten wire can be used for a number of refractory applications. Examples of some uses include semiconductor, solar and vapor deposition (CVD, PVD, MOCVD). Molybdenum refractory wire can also be used for simple solutions, such as a tie off, heat sink, or support/mount. Thermo Shield also produces... [See More]
- Shape / Form: Wire; Semi-finished, Mill Stock or Near Net Shapes
- Width / OD: 6.00E-4 to 0.1000
- Metal / Alloy Type: Tungsten