Conveyor Drive Rollers and Idler Rollers
from Stock Drive Products & Sterling Instrument - SDP/SI
Miscellaneous Mechanical Components are those components and assemblies not easily categorized. Idler Rollers, Feed Rollers, Cam Followers, Synchro Clamps and Geneva Mechanisms all play an important role in a broad range of applications. [See More]
- Application: Conveyor
- Roll Diameter: 0.5000
- Type: Idler Roller
- Material: Plastic; Urethane
from Stock Drive Products & Sterling Instrument - SDP/SI
Miscellaneous Mechanical Components are those components and assemblies not easily categorized. Idler Rollers, Feed Rollers, Cam Followers, Synchro Clamps and Geneva Mechanisms all play an important role in a broad range of applications. [See More]
- Application: Conveyor
- Roll Diameter: 0.5000
- Type: Idler Roller
- Material: Plastic; Urethane
from Stock Drive Products & Sterling Instrument - SDP/SI
Miscellaneous Mechanical Components are those components and assemblies not easily categorized. Idler Rollers, Feed Rollers, Cam Followers, Synchro Clamps and Geneva Mechanisms all play an important role in a broad range of applications. [See More]
- Application: Conveyor
- Roll Diameter: 0.5000
- Type: Feed Roller
- Material: Plastic; Urethane
from Stock Drive Products & Sterling Instrument - SDP/SI
Miscellaneous Mechanical Components are those components and assemblies not easily categorized. Idler Rollers, Feed Rollers, Cam Followers, Synchro Clamps and Geneva Mechanisms all play an important role in a broad range of applications. [See More]
- Application: Conveyor
- Roll Diameter: 0.5620
- Type: Feed Roller
- Material: Plastic; Urethane
from Stock Drive Products & Sterling Instrument - SDP/SI
Miscellaneous Mechanical Components are those components and assemblies not easily categorized. Idler Rollers, Feed Rollers, Cam Followers, Synchro Clamps and Geneva Mechanisms all play an important role in a broad range of applications. [See More]
- Application: Conveyor
- Roll Diameter: 0.8120
- Type: Idler Roller
- Material: Plastic; Cast Nylon 12
from Stock Drive Products & Sterling Instrument - SDP/SI
Miscellaneous Mechanical Components are those components and assemblies not easily categorized. Idler Rollers, Feed Rollers, Cam Followers, Synchro Clamps and Geneva Mechanisms all play an important role in a broad range of applications. [See More]
- Application: Conveyor
- Roll Diameter: 1.12
- Type: Idler Roller
- Material: Plastic; Urethane Surface
from Stock Drive Products & Sterling Instrument - SDP/SI
Miscellaneous Mechanical Components are those components and assemblies not easily categorized. Idler Rollers, Feed Rollers, Cam Followers, Synchro Clamps and Geneva Mechanisms all play an important role in a broad range of applications. [See More]
- Application: Conveyor
- Length/Width: 1.75
- Type: Idler Roller
- Roll Diameter: 0.5000
from Stock Drive Products & Sterling Instrument - SDP/SI
Miscellaneous Mechanical Components are those components and assemblies not easily categorized. Idler Rollers, Feed Rollers, Cam Followers, Synchro Clamps and Geneva Mechanisms all play an important role in a broad range of applications. [See More]
- Application: Conveyor
- Length/Width: 1.26
- Type: Idler Roller
- Roll Diameter: 0.4016
from Stock Drive Products & Sterling Instrument - SDP/SI
Miscellaneous Mechanical Components are those components and assemblies not easily categorized. Idler Rollers, Feed Rollers, Cam Followers, Synchro Clamps and Geneva Mechanisms all play an important role in a broad range of applications. [See More]
- Application: Conveyor
- Roll Diameter: 0.4724
- Type: Idler Roller
- Material: Plastic; Urethane
from Stock Drive Products & Sterling Instrument - SDP/SI
Miscellaneous Mechanical Components are those components and assemblies not easily categorized. Idler Rollers, Feed Rollers, Cam Followers, Synchro Clamps and Geneva Mechanisms all play an important role in a broad range of applications. [See More]
- Application: Conveyor
- Roll Diameter: 0.4724
- Type: Idler Roller
- Material: Plastic; Urethane
from Stock Drive Products & Sterling Instrument - SDP/SI
Miscellaneous Mechanical Components are those components and assemblies not easily categorized. Idler Rollers, Feed Rollers, Cam Followers, Synchro Clamps and Geneva Mechanisms all play an important role in a broad range of applications. [See More]
- Application: Conveyor
- Roll Diameter: 0.4724
- Type: Feed Roller
- Material: Plastic; Urethane
from Stock Drive Products & Sterling Instrument - SDP/SI
Miscellaneous Mechanical Components are those components and assemblies not easily categorized. Idler Rollers, Feed Rollers, Cam Followers, Synchro Clamps and Geneva Mechanisms all play an important role in a broad range of applications. [See More]
- Application: Conveyor
- Roll Diameter: 0.5512
- Type: Feed Roller
- Material: Plastic; Urethane
from Stock Drive Products & Sterling Instrument - SDP/SI
For power transmission applications, a belt and pulley drive system are one of the most common and cost-effective methods used to transfer motion in a drive system. synchronous timing belts, with their defined pattern and evenly spaced teeth, mate with matching timing belt pulleys and idlers to... [See More]
- Application: Conveyor
- Length/Width: 1.38
- Type: Idler Roller
- Roll Diameter: 1.18
from Rotacaster Pty Ltd.
Rotacasters offer a superb solution for multi-directional conveyor and load transfer needs. Built to provide the robustness and ride quality of an industrial floor wheel, the Rotacaster ’s patented full polymer construction and 360 º manoeuvrability has brought a new level of performance... [See More]
- Application: Conveyor
- Roll Diameter: 4.92
- Type: Idler Roller
- Material: Plastic; Polyurethane
from Precision Pulley, Inc.
Carrying Idler; 5" Roll Diameter; Three Rolls, Equal Length; Steel Roller; CEMA Class C - Medium Duty; For 24" Wide Belt; 35° Trough Angle; Factory Sealed [See More]
- Application: Conveyor
- Length/Width: 24
- Type: Idler Roller
- Roll Diameter: 5
from Ashland Conveyor Products
3/4 " O.D. x 20 gauge plain steel roller with 1/4 " round steel spring retained shaft and light oil bearings [See More]
- Application: Conveyor
- Length/Width: 7
- Type: Idler Roller
from Belt Technologies, Inc.
Friction drive pulleys are generally flat-faced with no timing element; crowning pulley faces are not generally recommended. To discuss the reasons why, please contact a Belt Technologies engineer who is familiar with metal belt dynamics. When crowning is appropriate, two geometries may be used:... [See More]
- Application: Conveyor; Packaging; Printer / Copier
from RegalRexnord
Idl*rtn Trac Stl 5 Drp [See More]
- Application: Conveyor
- Length/Width: 45
- Type: Idler Roller
- Roll Diameter: 6
from Webb-Stiles Company
Webb-Stiles manufacturers a complete line of rollers for conveyors. We also manufacture large diameter rollers to the customers specifications or our standards. We can manufacture to any length and have a range of bearings, sprockets and line-shaft grooved rollers. [See More]
- Application: Conveyor
- Length/Width: 7 to 104
- Type: Idler Roller
- Roll Diameter: 1 to 3.5
from ITOH Denki USA, Inc.
Designed for slim and compact lines. Easy installation into existing conveyors. Simplifies new conveyor design. Easy control of forward, reverse and stop. [See More]
- Application: Conveyor
- Length/Width: 7.87 to 8.66
- Type: Motorized Roller
- Roll Diameter: 1.5
from item America, LLC
Braking Castor Insert D32-50 regulates the speed of even light containers and goods on Roller Conveyor 6 40x40 E D30. The braking castor is suitable for transported goods weighing upwards of 200 g. The adaptive braking function is performed by a planetary gearbox that runs very smoothly and quietly. [See More]
- Application: Conveyor
- Length/Width: 1.97
- Type: Brake Roller
- Roll Diameter: 0.9843
from Rotacaster Pty Ltd.
Rotacasters offer a superb solution for multi-directional conveyor and load transfer needs. Built to provide the robustness and ride quality of an industrial floor wheel, the Rotacaster ’s patented full polymer construction and 360 º manoeuvrability has brought a new level of performance... [See More]
- Application: Conveyor
- Roll Diameter: 1.89
- Type: Idler Roller
- Material: Plastic; Polyurethane, TCP
from Ashland Conveyor Products
3/4 " O.D. x 20 gauge plain steel roller with 1/4 " round steel spring retained shaft and light oil bearings [See More]
- Application: Conveyor
- Length/Width: 8
- Type: Idler Roller
from Belt Technologies, Inc.
Belt Technologies has developed an innovative concept in flat belt tracking called the Independently Steerable Pulley, or ISP. It can be used in the following system designs: Two pulley conveyor systems in which the ISP is the idler or driven pulley. Systems with multiple idler pulleys on a common... [See More]
- Application: Conveyor; Packaging; Printer / Copier
from RegalRexnord
18 F4041-04 Live ShaFt Steel Roll w/BB Pillow BLks [See More]
- Application: Conveyor
- Length/Width: 21
- Type: Idler Roller
- Roll Diameter: 4
from ITOH Denki USA, Inc.
Designed for slim and compact lines. Easy installation into existing conveyors. Simplifies new conveyor design. Easy control of forward. reverse and stop. Perfect for clean lines. [See More]
- Application: Conveyor
- Length/Width: 7.87 to 8.66
- Type: Motorized Roller
- Roll Diameter: 1.68
from item America, LLC
The insert for controlling speed on the roller conveyor! Since containers and goods glide over a roller conveyor at high speed, it can sometimes be necessary to intervene at specific points to prevent heavy impacts and thus reduce strain on the frame and the transported goods. Braking Castor D30-23... [See More]
- Application: Conveyor
- Length/Width: 1.78
- Type: Brake Roller
- Roll Diameter: 1.18
from Ashland Conveyor Products
3/4 " O.D. x 20 gauge plain steel roller with 1/4 " round steel spring retained shaft and light oil bearings [See More]
- Application: Conveyor
- Length/Width: 9
- Type: Idler Roller
from Belt Technologies, Inc.
Introducing TruPace. Belt Technologies is known for custom and innovative PureSteel ® metal belts and metal conveyor belt solutions. Continuing the tradition of excellence and adding to the line of pulleys, the Belt team is proud to introduce TruPace. Available as a standalone product or as part... [See More]
- Application: Conveyor; Packaging; Printer / Copier
from RegalRexnord
18-B4020 B+ 4x21 Stl Roll Regreasable w/4.25 Rise Brkt [See More]
- Application: Conveyor
- Length/Width: 21
- Type: Idler Roller
- Roll Diameter: 4
from ITOH Denki USA, Inc.
Easy installation into existing conveyors. Simplifies new conveyor design. Easy control of forward, reverse and stop. Perfect for clean lines. 7/16" Hex Shaft. [See More]
- Application: Conveyor
- Length/Width: 7.87 to 9.84
- Type: Motorized Roller
- Roll Diameter: 1.91
from item America, LLC
The tube roller! Roller D46/D30-20 uses a Profile D30 as an axle and thus supports all sorts of movements. Because the Roller has the same conveying height as the item roller conveyors, it can also support the transitions on conveyor lines with different gradients. This ensures a more gentle and... [See More]
- Application: Conveyor
- Roll Diameter: 1.81
- Type: Guide Roller
- Shaft Diameter: 1.19
from Ashland Conveyor Products
3/4 " O.D. x 20 gauge plain steel roller with 1/4 " round steel spring retained shaft and light oil bearings [See More]
- Application: Conveyor
- Length/Width: 10
- Type: Idler Roller
from Belt Technologies, Inc.
Belt Technologies has developed the TruTension ™ Pulley, a proprietary and state-of-the-art product unique to the belt conveyor market that precisely measures belt tension on conveyor systems. Standard pulleys do not have any tension indicators. The TruTension ™ Pulley, however,... [See More]
- Application: Conveyor; Packaging; Printer / Copier
- Roll Diameter: 2 to 10
- Length/Width: 6 to 36
from RegalRexnord
18-B4031 Fl Trg Idler-Pos Tp Chk 18-B4052 Remove Bkts [See More]
- Application: Conveyor
- Length/Width: 21
- Type: Idler Roller
- Roll Diameter: 4
from ITOH Denki USA, Inc.
Designed for continuous and intermittent duty. Easy installation into existing conveyor lines. Not suited for repeated locking. Easy control of forward, reverse and stop.. [See More]
- Application: Conveyor
- Length/Width: 7.87 to 12.99
- Type: Motorized Roller
- Roll Diameter: 2.24
from Ashland Conveyor Products
3/4 " O.D. x 20 gauge plain steel roller with 1/4 " round steel spring retained shaft and light oil bearings [See More]
- Application: Conveyor
- Length/Width: 11
- Type: Idler Roller
from Belt Technologies, Inc.
Available as a standalone product or as part of a conveyor system, Belt Technologies ’ TruTrack ™ Pulley precisely automates belt tracking by using a segmented roller design that moves with virtually no friction along the shaft between two edge guides, improving the lifespan of the belt. [See More]
- Application: Conveyor; Packaging; Printer / Copier
- Length/Width: 6 to 18
from RegalRexnord
18-B4040 B+ 4x21 Stl Roll Factory Sealed w/1.5 Drop Brkt [See More]
- Application: Conveyor
- Length/Width: 21
- Type: Idler Roller
- Roll Diameter: 4
from ITOH Denki USA, Inc.
For applications requiring extended stall periods. Special high impedance motor draws low current under any load condition. [See More]
- Application: Conveyor
- Length/Width: 7.87 to 12.99
- Type: Motorized Roller
- Roll Diameter: 2.24
from Ashland Conveyor Products
3/4 " O.D. x 20 gauge plain steel roller with 1/4 " round steel spring retained shaft and light oil bearings [See More]
- Application: Conveyor
- Length/Width: 12
- Type: Idler Roller
from RegalRexnord
18-B4051 Factory Sealed Return Training Idler Act Shoe [See More]
- Application: Conveyor
- Length/Width: 21
- Type: Idler Roller
- Roll Diameter: 4
from ITOH Denki USA, Inc.
Designed for intermittent duty. 150% more torque than PM570AS. Motor is protected from thermal overload. Duty cycle of 50%.. [See More]
- Application: Conveyor
- Length/Width: 7.87 to 12.2
- Type: Motorized Roller
- Roll Diameter: 2.24
from Ashland Conveyor Products
3/4 " O.D. x 20 gauge plain steel roller with 1/4 " round steel spring retained shaft and light oil bearings [See More]
- Application: Conveyor
- Length/Width: 13
- Type: Idler Roller
from RegalRexnord
18-B4052 Factory Sealed Return Training Idler Pos Arm [See More]
- Application: Conveyor
- Length/Width: 21
- Type: Idler Roller
- Roll Diameter: 4
from ITOH Denki USA, Inc.
Designed for heavy load transfer. Easy installation into existing conveyor lines. Easy control of forward, reverse, stop. Not suited for repeated locking. [See More]
- Application: Conveyor
- Length/Width: 7.87 to 12.99
- Type: Motorized Roller
- Roll Diameter: 2.38
from Ashland Conveyor Products
3/4 " O.D. x 20 gauge plain steel roller with 1/4 " round steel spring retained shaft and light oil bearings [See More]
- Application: Conveyor
- Length/Width: 14
- Type: Idler Roller
from RegalRexnord
18-B4200 B+ Regreasable Troughing Idler [See More]
- Application: Conveyor
- Length/Width: 7
- Type: Idler Roller
- Roll Diameter: 4
from ITOH Denki USA, Inc.
Designed for heavy load transfer. For applications requiring extended stall periods. Special high impedance motor draws low current under any condition. [See More]
- Application: Conveyor
- Length/Width: 7.87 to 12.99
- Type: Motorized Roller
- Roll Diameter: 2.38
from Ashland Conveyor Products
3/4 " O.D. x 20 gauge plain steel roller with 1/4 " round steel spring retained shaft and light oil bearings [See More]
- Application: Conveyor
- Length/Width: 15
- Type: Idler Roller
from RegalRexnord
18-B4212 Troughing Training Idler-Pos Type [See More]
- Application: Conveyor
- Length/Width: 7
- Type: Idler Roller
- Roll Diameter: 4
from ITOH Denki USA, Inc.
Designed for heavy load transfer. Motor is protected from thermal overload. 150% more torque than PM605AS. 50% duty cycle. Maximum run time of 20 min. [See More]
- Application: Conveyor
- Length/Width: 7.87 to 11.81
- Type: Motorized Roller
- Roll Diameter: 2.38
from Ashland Conveyor Products
3/4 " O.D. x 20 gauge plain steel roller with 1/4 " round steel spring retained shaft and light oil bearings [See More]
- Application: Conveyor
- Length/Width: 16
- Type: Idler Roller
from RegalRexnord
18-B4300 B+ Regreasable Troughing Idler [See More]
- Application: Conveyor
- Length/Width: 7
- Type: Idler Roller
- Roll Diameter: 4
from ITOH Denki USA, Inc.
Powerful driving for small belt conveyors. Heavy load transfer for roller conveyors. Manufactured to IP55 standards for dust proof operation. Internal thermal overload protection. Designed for continuous and intermittent operation. Operation without oil bath. Eliminates risk of oil leakage. [See More]
- Application: Conveyor
- Length/Width: 7.87 to 12.99
- Type: Motorized Roller
- Roll Diameter: 2.38
from Ashland Conveyor Products
3/4 " O.D. x 20 gauge plain steel roller with 1/4 " round steel spring retained shaft and light oil bearings [See More]
- Application: Conveyor
- Length/Width: 17
- Type: Idler Roller
from RegalRexnord
18-B4312 Troughing Training Idler-Pos Type [See More]
- Application: Conveyor
- Length/Width: 7
- Type: Idler Roller
- Roll Diameter: 4
from ITOH Denki USA, Inc.
Strong motor torque. Long motor life. Variable speed (25-100%). Class E insulation. Dynamic brake. Highly durable gear and structure. LED signal for self diagnosis of failure. Supplied with No. CB-002 Driver card that has built in overload protection. Driver card CB-016S4 available. [See More]
- Application: Conveyor
- Length/Width: 9.57 to 15.91
- Type: Motorized Roller
- Roll Diameter: 1.91
from Ashland Conveyor Products
3/4 " O.D. x 20 gauge plain steel roller with 1/4 " round steel spring retained shaft and light oil bearings [See More]
- Application: Conveyor
- Length/Width: 18
- Type: Idler Roller
from RegalRexnord
18-B5043 B+ 5x21 RuB Disc Roll w/1.5 Drop Brkt [See More]
- Application: Conveyor
- Length/Width: 21
- Type: Idler Roller
- Roll Diameter: 5
from ITOH Denki USA, Inc.
Features: • Improved Torque. • 7/16in hexagonal shafts. • Spring-loaded shaft (non-cable side). • 300mm [11.81in] motor cable. • Dustproof design (IP54). • Straight, seamless tube. • Zinc plated, carbon steel tube. • Utilizes CB-030 driver card. [See More]
- Application: Conveyor
- Length/Width: 12.68 to 13.58
- Type: Motorized Roller
- Roll Diameter: 1.91
from Ashland Conveyor Products
3/4 " O.D. x 20 gauge plain steel roller with 1/4 " round steel spring retained shaft and light oil bearings [See More]
- Application: Conveyor
- Length/Width: 19
- Type: Idler Roller
from RegalRexnord
Idl*20 A/S Stl Eq Factory Sealed B+ [See More]
- Application: Conveyor
- Length/Width: 7
- Type: Idler Roller
- Roll Diameter: 5
from ITOH Denki USA, Inc.
Features: • 150% more higher torque then PM486FS. • Incline conveyor applications. • Belt application. • DC brushless motor is adopted for long life. • 7/16 hex (threaded) shaft. • The motor is protected from overheating. • Utilizes CB-016S4 or CB-016S7 driver... [See More]
- Application: Conveyor
- Length/Width: 12.68 to 17.01
- Type: Motorized Roller
- Roll Diameter: 1.91
from Ashland Conveyor Products
3/4 " O.D. x 20 gauge plain steel roller with 1/4 " round steel spring retained shaft and light oil bearings [See More]
- Application: Conveyor
- Length/Width: 20
- Type: Idler Roller
from RegalRexnord
18-B5310 Troughing Training Idler-act Sh Chk 18-B5312 411-20009 Shoe [See More]
- Application: Conveyor
- Length/Width: 7
- Type: Idler Roller
- Roll Diameter: 5
from ITOH Denki USA, Inc.
Inner rotor design. DC brushless motor is adopted for long life. 7/16" Hex Shaft. The motor is protected from overheating. Includes CB-002N Driver Card and A-071-G (Flat on top) or A-081-G (point on top) fitting. See driver card page for the many types of other cards available including ZPA (zero... [See More]
- Application: Conveyor
- Length/Width: 12.01 to 15.43
- Type: Motorized Roller
- Roll Diameter: 1.91
from Ashland Conveyor Products
3/4 " O.D. x 20 gauge plain steel roller with 1/4 " round steel spring retained shaft and light oil bearings [See More]
- Application: Conveyor
- Length/Width: 21
- Type: Idler Roller
from RegalRexnord
18-C5020 5x21 Roll Regreasable w/4.25 Rise Bracket [See More]
- Application: Conveyor
- Length/Width: 21
- Type: Idler Roller
- Roll Diameter: 5
from ITOH Denki USA, Inc.
Features: PM486/500XE series Power Moller are latest generation of internal driver card rollers. Simple and compact (Integral motor driver card). Brushless dc motor with ensured long life. Highly durable metallic gears. Simplified wiring (no external driver card wiring). Built-in thermal overload... [See More]
- Application: Conveyor
- Length/Width: 13.15 to 15.16
- Type: Motorized Roller
- Roll Diameter: 4.86E-5
from Ashland Conveyor Products
3/4 " O.D. x 20 gauge plain steel roller with 1/4 " round steel spring retained shaft and light oil bearings [See More]
- Application: Conveyor
- Length/Width: 22
- Type: Idler Roller
from RegalRexnord
18-C5040 5x21 Roll Regreasable w/4.50 Drop Bracket [See More]
- Application: Conveyor
- Length/Width: 21
- Type: Idler Roller
- Roll Diameter: 5
from ITOH Denki USA, Inc.
Brushless design for high level drive systems. Variable speed. Silent operation. High torque. Perfect for clean lines. Includes No. CB-016S2 Driver Card. Driver card CB-016S4 also available. [See More]
- Application: Conveyor
- Length/Width: 9.92 to 16.34
- Type: Motorized Roller
- Roll Diameter: 2.24
from Ashland Conveyor Products
.84 " O.D. x .107 PVC with 1/4 " round steel spring retained shaft and commercial light oil bearings [See More]
- Application: Conveyor
- Length/Width: 4
- Type: Idler Roller
from RegalRexnord
18-C5052 Return Training Idler [See More]
- Application: Conveyor
- Length/Width: 21
- Type: Idler Roller
- Roll Diameter: 5
from ITOH Denki USA, Inc.
Designed for heavy load transfer. Brushless design for high level drive systems. Variable speed. Silent operation. High torque. Includes No. CB-016S2 Driver Card. Driver card CB-016S4 also available. [See More]
- Application: Conveyor
- Length/Width: 9.92 to 16.34
- Type: Motorized Roller
- Roll Diameter: 2.38
from Ashland Conveyor Products
1-3/8 " O.D. x 16 gauge galvanized steel roller with 5/16 " hex steel spring retained shaft and light oil bearings. [See More]
- Application: Conveyor
- Length/Width: 7
- Type: Idler Roller
from RegalRexnord
18-C5202 Factory Sealed Troughing Impact Idler [See More]
- Application: Conveyor
- Length/Width: 7
- Type: Idler Roller
- Roll Diameter: 5
from ITOH Denki USA, Inc.
DC brushless motor. 11/16 hex (threaded) shaft. Heavy duty pallet handling. Low profile requirement of pallet handling. Including CB-016S4 driver card. [See More]
- Application: Conveyor
- Length/Width: 15.24 to 16.14
- Type: Motorized Roller
- Roll Diameter: 2.5
from Ashland Conveyor Products
1-3/8 " O.D. x 16 gauge galvanized steel roller with 5/16 " hex steel spring retained shaft and light oil bearings. [See More]
- Application: Conveyor
- Length/Width: 8
- Type: Idler Roller
from RegalRexnord
18-C5210 Troughing Training Idler-act Sh Chk 18-C5212 411-20009 Shoe [See More]
- Application: Conveyor
- Length/Width: 7
- Type: Idler Roller
- Roll Diameter: 5
from ITOH Denki USA, Inc.
Features: DC brushless motor. 11/16 hex (threaded) shaft. Improved torque for heavy duty pallet handling. Low profile requirement of pallet handling. 1000mm (39.37 ″) power cable standard. Utilizes CBM-103FN Driver Card. [See More]
- Application: Conveyor
- Length/Width: 14.17 to 15.75
- Type: Motorized Roller
- Roll Diameter: 6.35E-5
from Ashland Conveyor Products
1-3/8 " O.D. x 16 gauge galvanized steel roller with 5/16 " hex steel spring retained shaft and light oil bearings. [See More]
- Application: Conveyor
- Length/Width: 9
- Type: Idler Roller
from RegalRexnord
18-C5302 Troughing Impact Idler [See More]
- Application: Conveyor
- Length/Width: 7
- Type: Idler Roller
- Roll Diameter: 5
from ITOH Denki USA, Inc.
Features: F- RAT specifications. Drop in Installation into existing MDR frames. Three Motors –Spine (belts), Lifting/Dropping Mechanism, Transfer Rollers. Controlled with Itoh Denki ’s IB 4 zone cards. Minimum Package Size: 300mm (11.81 ”) x 300mm (11.81 ”). Minimum Height:... [See More]
- Application: Conveyor
- Length/Width: 1.18
- Type: Motorized Roller
- Roll Diameter: 5.00E-5
from Ashland Conveyor Products
1-3/8 " O.D. x 16 gauge galvanized steel roller with 5/16 " hex steel spring retained shaft and light oil bearings. [See More]
- Application: Conveyor
- Length/Width: 10
- Type: Idler Roller
from RegalRexnord
18-C5400 Factory Sealed Troughing Idler [See More]
- Application: Conveyor
- Length/Width: 7
- Type: Idler Roller
- Roll Diameter: 5
from Ashland Conveyor Products
1-3/8 " O.D. x 16 gauge galvanized steel roller with 5/16 " hex steel spring retained shaft and light oil bearings. [See More]
- Application: Conveyor
- Length/Width: 11
- Type: Idler Roller
from RegalRexnord
Idl 45 Trough Imp Eq Factory Sealed [See More]
- Application: Conveyor
- Length/Width: 7
- Type: Idler Roller
- Roll Diameter: 5
from Ashland Conveyor Products
1-3/8 " O.D. x 16 gauge galvanized steel roller with 5/16 " hex steel spring retained shaft and light oil bearings. [See More]
- Application: Conveyor
- Length/Width: 12
- Type: Idler Roller
from RegalRexnord
18-C6042 6x21 Spiral Rubber Regreasable w/4.50 Drop Bracket [See More]
- Application: Conveyor
- Length/Width: 21
- Type: Idler Roller
- Roll Diameter: 5.5
from Ashland Conveyor Products
1-3/8 " O.D. x 16 gauge galvanized steel roller with 5/16 " hex steel spring retained shaft and light oil bearings. [See More]
- Application: Conveyor
- Length/Width: 13
- Type: Idler Roller
from RegalRexnord
20--gB5202 B+ R/g Troughing Impact Idler [See More]
- Application: Conveyor
- Length/Width: 9
- Type: Idler Roller
- Roll Diameter: 5
from Ashland Conveyor Products
1-3/8 " O.D. x 16 gauge galvanized steel roller with 5/16 " hex steel spring retained shaft and light oil bearings. [See More]
- Application: Conveyor
- Length/Width: 14
- Type: Idler Roller
from RegalRexnord
24-f5022 Flat Impact w/ma2115 Pillow Blocks [See More]
- Application: Conveyor
- Length/Width: 27
- Type: Idler Roller
- Roll Diameter: 5