Rate Indication / Control Specialty Process Controllers
from Environics, Inc.
The Environics ® Series 4040 is a computerized gas dilution system that automatically generates precise gas standards for rapid multi-point calibration of analyzers.The gas mixes can be used in generating precise gas calibration standards, creating gaseous atmospheres or producing gas mixes for... [See More]
- Features: Multi-Function; Rate Indication/ Control
- Form Factor: Rack (optional feature); Stand-Alone (optional feature)
- Controller Type: Computerized Gas Dilution; Mix / Blending
- Interface: Computer Programmable; Network (optional feature)
from Kaeser Compressors, Inc.
Integrated Intelligence. Sigma Control 2 ™ coordinates compressed air generation and consumption. With its intelligent control, this advanced controller prevents inefficient energy usage, especially in part load operation. Sigma Control 2 is based on advanced industrial computing technology to... [See More]
- Features: Datalogger; Rate Indication/ Control
- Form Factor: Chassis
- Controller Type: Specialty Controllers and Measurement Devices
- Interface: Digital Front Panel; Computer Programmable; Network
from ALMiG USA Corporation
Features: Very easy toperate. Microprocessor control unit ALMIG AIR CONTROL f. Soft start through frequency transformer. Avoidance of current peaks during start-up. All electric connections tagged (name plates) for easy maintenance. Customer passwords for best system security against misuse. Display... [See More]
- Features: Multi-Function; Rate Indication/ Control
- Form Factor: Chassis
- Controller Type: Compressor Controller; Pressure
- Interface: Digital Front Panel
from Acro Associates, Inc.
Acro's Acrosense ™ Fluid Control Platform offers engineers the ability to quickly design, prototype and integrate fluid components used for developing medical device and bioprocessing systems. Our patent-pending technology consists of several preconfigured boards that enable basic to... [See More]
- Features: Multi-Function; Rate Indication/ Control; PC-Based
- Form Factor: Board
- Controller Type: Valve Controller; Flow; Laboratory
- Interface: Network
from Fluidwell bv
The F124 ratio controller has been designed to ensure that two flows are kept at the same ratio even if flows are changing. The Fluidwell ratio controller will show a strong influence of maintaining a good and constant quality of products and saves money on the blending components. The F124 is a key... [See More]
- Features: Rate Indication/ Control
- Form Factor: Chassis; Stand-Alone; Field Mount
- Controller Type: Ratio Controller; Flow; Mix / Blending
- Interface: Digital Front Panel; Computer Programmable (optional feature)
from Vogtlin Massflow USA
The new electronic red-y smart pressure controllers combine the reliable technology our of thermal mass flow controllers with electronic pressure control.The devices automatically control a predefined process pressure and at the same time measure and/or limit the flow rate.On-the-fly switching... [See More]
- Features: Datalogger; Rate Indication/ Control; Totalizing (Length or Roll Diameter) Indication/ Control
- Form Factor: Stand-Alone; Control Valve Integrated
- Controller Type: Pressure + Flow Controller; Flow; Mix / Blending; Pressure; Vacuum
- Interface: Switches; Digital Front Panel; Computer Programmable; Network
from Iwaki America and Walchem, IWAKI America Inc
The WBL400 Boiler Controllers and WCM400 Condensate Monitors represent the latest in technological and innovative advancements from Walchem. All of the standard features you ’d expect in conventional boiler controllers/condensate monitors are included, plus optional simple-to-use information... [See More]
- Features: Multi-Function; Rate Indication/ Control
- Form Factor: Chassis
- Controller Type: Boiler Controllers; Boiler
- Interface: Digital Front Panel
from DME Company
Compact and self contained. Provides Digital Display Readout of Cavity Pressure. Provides Amplified Output of Scaled Cavity Pressure Signal when setup correctly with Pin Dia. ( 0-5Vdc Output = 0 to 20,000 PSI ). User Selectable Analog Amplified Output: Default 0-5Vdc, user dip switch selectable... [See More]
- Features: Is a Chart Recorder (optional feature); Rate Indication/ Control
- Form Factor: Stand-Alone
- Controller Type: Hydraulic Controller; Pressure
- Interface: Switches; Digital Front Panel (optional feature)
from Time Mark Corporation
The Model 441 Multi-Stage Alternator is designed to control the operating sequence of multi-stage motor/pumping systems. It can also be used to maintain the desired level of pressure-on air compressor systems. Four motor select DIP switches located on the front panel allow the alternator to control... [See More]
- Features: Rate Indication/ Control
- Inputs: 4
- Controller Type: Controls Operating Sequence; Flow
- Type: DC Voltage Inputs
from OMEGA Engineering, Inc.
The CN6221 Series is an FM approved limit controller that can be configured either as a high limit or as a low limit controller. The CN6221 features universal input, Optional 2 alarm outputs, Optional retransmission output, a timer to count the total time the setpoint is exceeded, and a register to... [See More]
- Features: Rate Indication/ Control
- Form Factor: DIN
- Controller Type: Limit Controller
- Interface: Digital Front Panel
from Johnson Controls / FRICK / YORK PROCESS SYSTEMS
Our Quantum ™ HD controller is the most advanced industrial refrigeration controller on the market. You can access any control, calibration or value using the HD touch screen control from the powerful Quantum ™ HD. Get the peace of mind you want from the leading brand in performance... [See More]
- Features: Rate Indication/ Control
- Type: DC Voltage Inputs; Current Loop (Transmitter) Excitation; ICTD Sensor
- Interface: Network
- Control Signal: Analog Voltage Output; Current Loop Output
from Bijur Delimon International
Application. The SMAC Controller is a multi-purpose programmable controller used with industrial lubrication systems. Controller settings are saved whenever power is interrupted. Up to four operating modes can be selected which allows the controller to be used with various lubrication system... [See More]
- Features: Rate Indication/ Control
- Form Factor: Chassis
- Controller Type: Lubrication; Flow
- Interface: Digital Front Panel
from F.B. Leopold, a Xylem brand
The Leopold ® FilterWorx ® Automatic Control System is a complete filter control package consisting of all instrumentation and control equipment for the automatic monitoring and control of municipal water filtration systems. FilterWorx ACS delivers the efficiencies and economies so necessary... [See More]
- Features: Rate Indication/ Control
- Form Factor: Stand-Alone
- Controller Type: Filter Control; Flow
- Interface: Switches; Digital Front Panel; Computer Programmable
from Cambridge Viscosity by PAC
Featuring menu-driven electronics, the VISCOpro 2000 is the ideal solution for single-channel control needs, offering 13 measurement ranges and memory control for up to 40 fluid settings. The VISCOpro 2000 displays viscosity, temperature, and temperature-compensated viscosity (TCV) parameters, along... [See More]
- Features: Rate Indication/ Control
- Form Factor: Chassis
- Controller Type: Viscosity Controller; Laboratory
- Interface: Digital Front Panel
from ALMiG USA Corporation
Features: State of the art microprocessor operated. Very simple operator control. Parameter entry is protected by a code. Self-test of the compressor before every start-up for. Continuous monitoring of all parameters relevant to operation. Star-delta contactors, control voltage transformer,... [See More]
- Features: Multi-Function; Rate Indication/ Control
- Form Factor: Chassis
- Controller Type: Compressor Controller; Pressure
- Interface: Digital Front Panel
from Vogtlin Massflow USA
The new electronic red-y smart pressure controllers combine the reliable technology our of thermal mass flow controllers with electronic pressure control.The devices automatically control a predefined process pressure and at the same time measure and/or limit the flow rate.On-the-fly switching... [See More]
- Features: Datalogger; Rate Indication/ Control; Totalizing (Length or Roll Diameter) Indication/ Control
- Form Factor: Stand-Alone; Control Valve Integrated
- Controller Type: Pressure + Flow Controller; Flow; Mix / Blending; Pressure; Vacuum
- Interface: Switches; Digital Front Panel; Computer Programmable; Network
from DME Company
DME Single Zone Timers (TCM-03-024D) are highly accurate, solid state timers that feature resolution to 1/100 of second, far exceeding the industry standard of 1/10 of a second. Versatile for virtually any type of operation that requires a timer, including single-zone valve gate systems, core pulls,... [See More]
- Features: Rate Indication/ Control
- Form Factor: Stand-Alone
- Controller Type: Timing Control
- Interface: Switches; Digital Front Panel (optional feature)
from Time Mark Corporation
The Model 442 Multi-Stage Alternator is designed to control the operating sequence of multi-stage motor/pumping systems. It can also be used to maintain the desired level of pressure-on air compressor systems. Four motor select DIP switches located on the front panel allow the alternator to control... [See More]
- Features: Rate Indication/ Control
- Inputs: 4
- Controller Type: Controls Operating Sequence; Flow
- Type: DC Voltage Inputs
from OMEGA Engineering, Inc.
The PHUCN600 Series multi-parameter controller is a microprocessor-based controller capable of measuring one of the following parameters, pH, ORP, or conductivity. When shipped from the factory, the PHUCN600 Series is not set to measure any one parameter.When the PHUCN600 Series is powered up for... [See More]
- Features: Is a Chart Recorder; Rate Indication/ Control
- Form Factor: Chassis (optional feature); DIN (optional feature); Pipe Mount
- Controller Type: Conductivity Controller; pH / ORP
- Interface: Digital Front Panel
from Johnson Controls / FRICK / YORK PROCESS SYSTEMS
The Frick ® Quantum ™ HD Unity System Controller from Johnson Controls incorporates the most current industrial refrigeration control best practices with proven technology for a reliable, easy-to-use central control system perfect for cold storage and similar processes. Easily navigate... [See More]
- Features: Rate Indication/ Control
- Interface: Network
- Form Factor: Stand-Alone
- Type: DC Voltage Inputs; Current Loop (Transmitter) Excitation; ICTD Sensor
from Bijur Delimon International
Application. The SMC Controller is available in various timer and divider valve cycle count-based models, with adjustable on and off ranges to control electric motor-driven lubrication systems. The controller has the ability to detect abnormal operating situations. The unit has a lapsed time... [See More]
- Features: Rate Indication/ Control
- Form Factor: Chassis
- Controller Type: Lubrication; Flow
- Interface: Digital Front Panel
from F.B. Leopold, a Xylem brand
The Leopold ® Valve PAC ® Electronic Valve Positioner/Controller is a single-loop controller specifically designed to provide automatic rate-of-flow control of various flows in a water treatment plant, but can be used on a wide range of process control applications. It can be panel-mounted... [See More]
- Features: Rate Indication/ Control
- Form Factor: Chassis; Stand-Alone
- Controller Type: Filter Control; Flow
- Interface: Switches; Digital Front Panel
from ALMiG USA Corporation
Features: Very easy to operate. Microprocessor control unit ALMIG AIR CONTROL 2. Soft start through frequency transformer. Avoidance of current peaks during start-up. All electric connections tagged (name plates) for easy maintenance. Programming of all parameters through with the build in touchpad. [See More]
- Features: Multi-Function; Rate Indication/ Control
- Form Factor: Chassis
- Controller Type: Compressor Controller; Pressure
- Interface: Digital Front Panel
from Vogtlin Massflow USA
The new electronic red-y smart pressure controllers combine the reliable technology our of thermal mass flow controllers with electronic pressure control.The devices automatically control a predefined process pressure and at the same time measure and/or limit the flow rate.On-the-fly switching... [See More]
- Features: Datalogger; Rate Indication/ Control; Totalizing (Length or Roll Diameter) Indication/ Control
- Form Factor: Stand-Alone; Control Valve Integrated
- Controller Type: Pressure + Flow Controller; Flow; Mix / Blending; Pressure; Vacuum
- Interface: Switches; Digital Front Panel; Computer Programmable; Network
from DME Company
Hydraulic (oil) valve gate controls provide reliable, accurate and effective control. Solid-state timers and relays have a life rating of 10 million cycles. User-friendly auto-reset function. Individual test buttons for each zone provide precise time control to .01 second. Compact design takes up... [See More]
- Features: Rate Indication/ Control
- Form Factor: Stand-Alone
- Controller Type: Flow; Pressure
- Interface: Switches; Digital Front Panel (optional feature)
from OMEGA Engineering, Inc.
bull;. Now with. Embedded Internet (EI Option CNi16D Series). •. First Full Series of Instruments with. Programmable Color Displays. •. User Friendly, Simple to Configure. •. High Quality! 5-Year Warranty Std. •. Free Software, Active X Controls. •. Selectable Full Autotune... [See More]
- Features: Multi-Function; Rate Indication/ Control
- Form Factor: DIN
- Controller Type: Strain Controller; Environmental; HVAC; Temperature
- Interface: Digital Front Panel; Network
from Bijur Delimon International
Application. The SMDC Mobile Controller is a multi-purpose programmable controller used with on-board mobile lubrication systems. The unit is energized by the vehicle or machine ’s ignition switch. Controller settings are saved whenever power is interrupted. Up to four operating modes can be... [See More]
- Features: Rate Indication/ Control
- Form Factor: Chassis
- Controller Type: Lubrication; Flow
- Interface: Digital Front Panel
from F.B. Leopold, a Xylem brand
The Leopold ® AFC 5000 ® Filter Control System is designed to automatically control and monitor water and wastewater filter operation and backwash sequence. It is a totally integrated system that consists of the control console, programmable controller hardware, and software. The AFC 5000... [See More]
- Features: Rate Indication/ Control
- Form Factor: Stand-Alone
- Controller Type: Filter Control; Flow
- Interface: Switches; Digital Front Panel; Computer Programmable
from ALMiG USA Corporation
Features: Very simple operator control. Parameter entry is protected by a code. Self-test of the compressor before every start-up for. Continuous monitoring of all parameters relevant to operation. 7 channels for the switch-on/switch-off time for compressors. 7 channels for the pressure reduction. [See More]
- Features: Multi-Function; Datalogger; Is a Chart Recorder; Rate Indication/ Control; Totalizing (Length or Roll Diameter) Indication/ Control
- Form Factor: Chassis
- Controller Type: Compressor Controller; Pressure
- Interface: Digital Front Panel
from Vogtlin Massflow USA
The new electronic red-y smart pressure controllers combine the reliable technology our of thermal mass flow controllers with electronic pressure control.The devices automatically control a predefined process pressure and at the same time measure and/or limit the flow rate.On-the-fly switching... [See More]
- Features: Datalogger; Rate Indication/ Control; Totalizing (Length or Roll Diameter) Indication/ Control
- Form Factor: Stand-Alone; Control Valve Integrated
- Controller Type: Pressure + Flow Controller; Flow; Mix / Blending; Pressure; Vacuum
- Interface: Switches; Digital Front Panel; Computer Programmable; Network
from OMEGA Engineering, Inc.
bull;. First Full Series of Instruments with. Programmable Color Displays (Std.). •. User Friendly, Simple to Configure. •. High Quality! 5-Year Warranty. •. Free Software, Active X Controls. •. Selectable Full Autotune PID Control. •. High Accuracy: ±0.5 °C (0.9... [See More]
- Features: Rate Indication/ Control
- Form Factor: DIN
- Controller Type: Strain Controller; Environmental; HVAC; Temperature
- Interface: Digital Front Panel; Network; Web
from Bijur Delimon International
Application. The SS4500 Controller is designed to operate, control and monitor all types of lubrication systems. The unit is programmed by the customer in the controller's set-up mode. The unit prompts several questions about the system and the customer tailors the SS4500's operating mode by... [See More]
- Features: Rate Indication/ Control
- Form Factor: Chassis
- Controller Type: Lubrication; Flow
- Interface: Digital Front Panel
from F.B. Leopold, a Xylem brand
The Leopold ® SFC 2000 ® Supervisory Filter Control System is designed to continuously monitor and automatically control filter operation and backwash sequencing in water and wastewater treatment plants. The SFC 2000 brings PC-based control, operator interface, and data acquisition to the... [See More]
- Features: Rate Indication/ Control; PC-Based
- Form Factor: Stand-Alone
- Controller Type: Filter Control; Flow
- Interface: Switches; Digital Front Panel; Computer Programmable