Digital Front Panel Specialty Process Controllers
from DigiKey
Process Controller 24VDC Panel Mount [See More]
- Interface: Digital Front Panel
- Control Signal: Solid State (2)
- Form Factor: Chassis
- Standards and Compliance: RoHS
from MSA Safety
The SENTRY io Controller offers a robust, easy to use platform for nearly any application and skill level. Modern touchscreen HMI supports intuitive setup, operation, and troubleshooting workflows. Guided setup and auto-recognition of MSA and General Monitors® flame and gas detectors through HART... [See More]
- Interface: Digital Front Panel
- Form Factor: Chassis
- Controller Type: Fire and Gas Detection Controller; Environmental
- Inputs: 22
from Kaeser Compressors, Inc.
Integrated Intelligence. Sigma Control 2 ™ coordinates compressed air generation and consumption. With its intelligent control, this advanced controller prevents inefficient energy usage, especially in part load operation. Sigma Control 2 is based on advanced industrial computing technology to... [See More]
- Interface: Digital Front Panel; Computer Programmable; Network
- Form Factor: Chassis
- Controller Type: Specialty Controllers and Measurement Devices
- Inputs: 6
from Thermon, Inc
Process heating, including electrical heat trace systems, has advanced significantly in recent years. Having the tools to monitor individual heat trace circuit performance to the point of predicting (and perhaps preventing) challenges facing critical process lines and instrumentation is here, and... [See More]
- Interface: Digital Front Panel
- Form Factor: Chassis
- Controller Type: Process heating, including electrical heat trace systems; UPC; Temperature
from Agilent Technologies - Vacuum Products
The Agilent 4UHV Ion Pump Controller enables you to power, control, and monitor up to four ion pumps simultaneously and independently. The 4UHV starts and controls ion pumps of any type (diode, noble diode, StarCell, triode) and size (from 2 to 2,500 L/s). A large four-line LCD display allows... [See More]
- Interface: Digital Front Panel; Network (optional feature)
- Form Factor: Rack; Stand-Alone
- Controller Type: Pressure reading; Pump
- Control Outputs: 4
from ABB Measurement & Analytics
The plug and play UviTec Controller provides a simplified version of the UviTec Controller Pro. Featuring a character LCD display, hierarchical menu system and correlation software. A single sensor or multiple sensors and peripheral accessory devices can easily be controlled and configured from one... [See More]
- Interface: Digital Front Panel; Computer Programmable
- Form Factor: Chassis
- Controller Type: All UviTec sensors
- Inputs: 4
from Environics, Inc.
The Environics ® Series 2020 Continuous Emissions Monitoring Calibration System (CEMCS) automatically generates precise gas standards for rapid multi-point and multi-scale calibration of Continuous Emissions Monitors (CEM's). The Series 2020 precisely dilutes high concentration Protocol-1 or... [See More]
- Interface: Digital Front Panel; Computer Programmable (optional feature); Network (optional feature)
- Form Factor: Rack (optional feature); Stand-Alone (optional feature)
- Controller Type: Continuous Emissions Monitor; Mix / Blending
- Type: Serial / Digital Input
from DigiKey
CONTROL PROC RELAY OUT 90-270V [See More]
- Interface: Digital Front Panel
- Control Signal: Switched Output; Relay
- Form Factor: Chassis
from Thermon, Inc
Genesis Duo is Thermon ’s industry leading IIoT enabled heat trace temperature controller and high temperature limiter. The Duo provides control and monitoring capabilities for one or two heat tracing circuits with input from up to two intrinsically safe RTDs per circuit. The unit can be... [See More]
- Interface: Digital Front Panel; Network
- Form Factor: Chassis
- Controller Type: Heat Tracing; UPC; Temperature
- Standards and Compliance: ETL, IEC, IECEx, Ex, UKCA, CE
from Agilent Technologies - Vacuum Products
The Agilent IPCMini is a modern 1/4-rack ion pump controller with 3.5" touch screen display. The IPCMini can operate pumps up to 500 L/s pumps with 40W of power. With less than 10 ms of I/O response time and 1 nA of current resolution, it is suitable when a quick trigger and an accurate pressure... [See More]
- Interface: Digital Front Panel; Network (optional feature)
- Form Factor: Rack; Stand-Alone
- Controller Type: Pressure reading; Pump
- Control Outputs: 1
from ABB Measurement & Analytics
Full control and monitoring of multiple sensors can be achieved with the plug and play UviTec Controller Pro. Featuring a 12.1 ” colour LCD touch screen graphic interface, the controller offers superior functionality and configurability while maintaining ease of use and navigation. The... [See More]
- Interface: Digital Front Panel; Computer Programmable
- Form Factor: Chassis
- Controller Type: All UviTec sensors
- Type: Current Loop (Transmitter) Excitation (optional feature); Serial / Digital Input (optional feature); Modbus RTU (RS485), and Modbus TCP
from DigiKey
CN8501TC-F1-C4 [See More]
- Interface: Digital Front Panel
- Control Signal: Analog
- Form Factor: DIN
- Communication / Port Type: RS-485
from Thermon, Inc
The TraceNet TCM18 is an extension of Thermon's proven control and monitoring systems. The TCM18 offers design simplicity and versatility while offering the lowest total costs of ownership. Thermon's mission is "To enhance our customers 'process operations by providing innovative and reliable... [See More]
- Interface: Digital Front Panel
- Form Factor: Chassis
- Controller Type: Heat Tracing; UPC; Temperature
from DigiKey
Power Controller 100 ~ 240VAC Chassis Mount [See More]
- Interface: Digital Front Panel
- Control Signal: Solid State (2)
- Form Factor: Chassis Mount
- Communication / Port Type: RS-485 (CompoWay/F)
from Thermon, Inc
The TraceNet TCM2 is a microprocessor based temperature control and monitoring module developed specifically for heat tracing applications. The unit provides control and monitoring capabilities via digital information display for one or two heat tracing circuits with input from up to two RTDs per... [See More]
- Interface: Digital Front Panel; Network
- Form Factor: Chassis
- Controller Type: Heat Tracing; UPC; Temperature
from Dukane
The heart of any ultrasonic plastics assembly system, Dukane's Dynamic Process Controllers are the industry's most sophisticated and comprehensive process controllers. Available in various power levels and frequencies, our four distinct DPCs are engineered to meet every level of control required for... [See More]
- Interface: Digital Front Panel
- Form Factor: Chassis (optional feature); Stand-Alone (optional feature)
- Controller Type: Ultrasonic Assembly Controller
- Inputs: 1
from Saint Clair Systems, Inc.
Upgrade without the upcharge! Our MP3000 Series Viscosity Controller offers an entirely new standard of versatility and economy in a compact PLC/ Touch Screen package.Save set up time with simple, easy to understand menusUser friendly intuitive touchscreen interfaceSeparate PLC with two (2) 4-20... [See More]
- Interface: Digital Front Panel
- Features: PLC
- Controller Type: Viscosity Controller
from Froude, Inc.
Our popular Texcel V4 Controller is specifically designed to provide accurate, reliable and cost-effective control of hydraulic and eddy current dynamometers and engines. The controllers are simple to install, configure and calibrate, and provide displays of speed and torque in selected units of... [See More]
- Interface: Switches; Digital Front Panel
- Form Factor: Rack
from Conviron
With its modest palette of features and capabilities, the CMP6010 is easy to learn yet powerful and robust in its ability to accurately control. Designed for simplicity and ease of use, the CMP6010 allows you to control temperature, humidity and light. And given its compact, integrated design and... [See More]
- Interface: Digital Front Panel
- Form Factor: Chassis
- Controller Type: Light Controller; Humidity; Temperature
- Inputs: 3
from Johnson Controls / FRICK / YORK PROCESS SYSTEMS
At Frick ® by Johnson Controls, we make it easier to retrofit your current industrial refrigeration controller with the Quantum ™ HD Field Retrofit Kit. Put the most powerful type of high definition control right at your fingertips and extend the life of your existing equipment with the... [See More]
- Interface: Digital Front Panel; Web
from Dynalco
The AF900PC Air/Fuel Ratio Controller uses an advanced microprocessor controller to precisely maintain the air/fuel ratio of naturally aspirated and turbocharged carbureted gaseous fueled engines without the use of pneumatic converters. Heated O2 sensor ensure that the engine ’s air/fuel ratio... [See More]
- Interface: Digital Front Panel
- Form Factor: Chassis
- Controller Type: Air/Fuel Ratio Controller
- Type: Fieldbus / Network Input; Modbus
from Gefran
Single-loop microprocessor controller, 96 x 96 (1/4 DIN) format, appropriate for processes with high variation speed. Thanks to its extended functions and configurable hardware and software, it provides high applicative flexibility in systems that control and monitor pressure, force, temperature,... [See More]
- Interface: Digital Front Panel; Network
- Form Factor: DIN
- Controller Type: Ratio Controller; UPC; Pressure
- Inputs: 4
from Fluidwell bv
The F133 is a unique product as it is especially designed for a controlled delivery of undefined quantities. It offers all the functionality known from gas stations to fill-up your car. The unit incorporates special functions withtime delays to start a pump first, control a valve, showing leading... [See More]
- Interface: Digital Front Panel; Computer Programmable (optional feature)
- Form Factor: Chassis; Stand-Alone; Field Mount
- Controller Type: Delivery Controller/Dispenser; Batch
- Inputs: 2
from ALMiG USA Corporation
Features: Very easy toperate. Microprocessor control unit ALMIG AIR CONTROL f. Soft start through frequency transformer. Avoidance of current peaks during start-up. All electric connections tagged (name plates) for easy maintenance. Customer passwords for best system security against misuse. Display... [See More]
- Interface: Digital Front Panel
- Form Factor: Chassis
- Controller Type: Compressor Controller; Pressure
- Type: Serial / Digital Input
from Weber Screwdriving Systems, Inc.
Current control or torque/rotational angle sensor. The process controller C30S was developed to solve complex screwdriving applications. A wide range of open interfaces (including digital, Profibus, ProfiNet, Ethernet IP) allow the choice of 31 programs and individually configurable screwdriving... [See More]
- Interface: Digital Front Panel; Computer Programmable; Network
- Form Factor: Stand-Alone
- Controller Type: Screwdriving Process Control; UPC
- Inputs: 8
from Flygt, a Xylem brand
Speed control devices improve pump reliability and efficiency. [See More]
- Interface: Digital Front Panel
- Features: Multi-Function
- Controller Type: Speed Controller
from Cambridge Viscosity by PAC
Featuring menu-driven electronics, the VISCOpro 2000 is the ideal solution for single-channel control needs, offering 13 measurement ranges and memory control for up to 40 fluid settings. The VISCOpro 2000 displays viscosity, temperature, and temperature-compensated viscosity (TCV) parameters, along... [See More]
- Interface: Digital Front Panel
- Form Factor: Chassis
- Controller Type: Viscosity Controller; Laboratory
- Inputs: 1
from Nordson EFD
The multi-functional V100 controller provides safe, easy operation of the P-Jet CT and P-Dot CT jet valves and greater control over dispensing outcomes. By providing control of dispensing parameters, the V100 makes it possible to optimize valve performance. Two precision pressure regulators and a... [See More]
- Interface: Digital Front Panel
- Form Factor: Rack
- Controller Type: Valve Controller
- Type: DC Voltage Inputs
from Techcon
Cost Effective and Productivity-focused Multi-Purpose Digital Controller. The TS500R Multi-Purpose Digital Controller is the first of its type in the industry and is capable of controlling all Techcon valves including: Pneumatic Valves, Spray Valves, Rotary Auger Valves and Rotary Auger Valves with... [See More]
- Interface: Digital Front Panel
- Form Factor: Rack
- Controller Type: Dispensing
- Type: Programmable
from Iwaki America and Walchem, IWAKI America Inc
The WBL400 Boiler Controllers and WCM400 Condensate Monitors represent the latest in technological and innovative advancements from Walchem. All of the standard features you ’d expect in conventional boiler controllers/condensate monitors are included, plus optional simple-to-use information... [See More]
- Interface: Digital Front Panel
- Form Factor: Chassis
- Controller Type: Boiler Controllers; Boiler
- Inputs: 3
from Cambridge Technology, Inc.
The SM1000 Scan Control module from General. Scanning Solutions (a Cambridge Technology. business) is the next generation in galvo-steered. laser control system integration. Supported Lasers. IPG YLP Series Fiber Laser. SPI G3 Series Fiber Laser. CO2 (with tickle pulses). YAG (with first pulse... [See More]
- Interface: Digital Front Panel; Network
- Form Factor: Stand-Alone
- Controller Type: For Galvanometer-Steered Laser Systems
- Inputs: 4
from Hach
The economical PRO-D3 Transmitter is easy to use with its menu-guided user interface. The NEMA 4X enclosure can be panel, wall, pipe, or integral sensor mounted. The interface is identical to GLI's 33-series analyzers. Versatile 2, 3, or 4-wire hookup capability. Isolated 4-20 mA output. The... [See More]
- Interface: Digital Front Panel
- Form Factor: Chassis; Wall, Pipe
- Controller Type: Dissolved Oxygen; Laboratory
- Inputs: 2
from Shimadzu Scientific Instruments, Inc.
Offering a wide array of functions and superb performance, the Servo Controller 4830 drastically enhances the accuracy of endurance and dynamic testing of materials and specimens. Utilizing advanced features and incorporating full digital control, the 4830 achieves world-class basic performance... [See More]
- Interface: Switches; Digital Front Panel
- Form Factor: Stand-Alone
- Controller Type: Testing Machine Controller
- Inputs: 1
from Linde North America, Inc.
The Linde Series 206-D Controller is a versatile automatic shutdown controller for any gas handling system. The standard controller unit offers warning and warning with shutdown, indication for all of its inputs, and a touch screen interface for visual indication of alarms. Almost every aspect of... [See More]
- Interface: Digital Front Panel
- Control Signal: Switched Output
- Controller Type: Automatic Shutdown Controller
from F.B. Leopold, a Xylem brand
The Leopold ® FilterWorx ® Automatic Control System is a complete filter control package consisting of all instrumentation and control equipment for the automatic monitoring and control of municipal water filtration systems. FilterWorx ACS delivers the efficiencies and economies so necessary... [See More]
- Interface: Switches; Digital Front Panel; Computer Programmable
- Form Factor: Stand-Alone
- Controller Type: Filter Control; Flow
- Features: Rate Indication/ Control
from OMEGA Engineering, Inc.
The CN6221 Series is an FM approved limit controller that can be configured either as a high limit or as a low limit controller. The CN6221 features universal input, Optional 2 alarm outputs, Optional retransmission output, a timer to count the total time the setpoint is exceeded, and a register to... [See More]
- Interface: Digital Front Panel
- Form Factor: DIN
- Controller Type: Limit Controller
- Type: DC Voltage Inputs; Current Loop (Transmitter) Excitation
from Bijur Delimon International
Application. The SMAC Controller is a multi-purpose programmable controller used with industrial lubrication systems. Controller settings are saved whenever power is interrupted. Up to four operating modes can be selected which allows the controller to be used with various lubrication system... [See More]
- Interface: Digital Front Panel
- Form Factor: Chassis
- Controller Type: Lubrication; Flow
- Type: DC Voltage Inputs; Frequency Inputs
from Vogtlin Massflow USA
The new electronic red-y smart pressure controllers combine the reliable technology our of thermal mass flow controllers with electronic pressure control.The devices automatically control a predefined process pressure and at the same time measure and/or limit the flow rate.On-the-fly switching... [See More]
- Interface: Switches; Digital Front Panel; Computer Programmable; Network
- Form Factor: Stand-Alone; Control Valve Integrated
- Controller Type: Pressure + Flow Controller; Flow; Mix / Blending; Pressure; Vacuum
- Inputs: 1
from Penncat Corporation
New Technology InteliGen is a comprehensive controller for both single and multiple gen-sets operating in standby or parallel modes. Compact construction is optimized for these. purposes; various HW modifications allow the customer to select the optimum type for a particular application. Built-in... [See More]
- Interface: Digital Front Panel
- Form Factor: Chassis
- Controller Type: Generator Controller
- Type: Serial / Digital Input
from Saint Clair Systems, Inc.
The Norcross VISC1000 Viscosity Control System can monitor and control from 1 to 3 stations and features a touch screen interface that displays process parameters and trend data for each station. Displaying set-point, actual viscosity, alarms, and automatic/manual mode for each station, it provides... [See More]
- Interface: Digital Front Panel
- Features: Multi-Function; Datalogger
- Controller Type: Viscosity Controller
from Froude, Inc.
THE LAST CONTROLLER YOU WILL EVER NEED FOR YOUR GAS TURBINE TEST BED. For over a decade, Froude's Texcel VX100 series has been a critical component of the gas turbine engine test bed. The time-tested combination of our controller, water valve, and water brake dynamometer provides a performance level... [See More]
- Interface: Switches; Digital Front Panel
from Conviron
The CMP6050 is the most advanced control system developed by Conviron. Configured to your chamber specifications from the factory, the CMP6050 offers a wide array of set-up, control, and alarm features to fine tune the configuration to your specific requirements. The scalability of the CMP6050... [See More]
- Interface: Digital Front Panel; Computer Programmable; Network
- Form Factor: Chassis
- Controller Type: Light and CO2 Controller; Humidity; Temperature
- Communication / Port Type: Ethernet
from Gefran
Microprocessor controller for three-step motorized valves, 48x48 (1/16DIN). Manufactured using SMT, the instrument provides a complete operator interface, protected by a Lexan membrane that ensures level IP65 faceplate protection. It has 4 keys, two green LED displays, each with 4 digits, 4 red... [See More]
- Interface: Digital Front Panel; Network
- Form Factor: DIN
- Controller Type: Valve Controller; UPC
- Type: DC Voltage Inputs; Current Loop (Transmitter) Excitation; Resistive/ Potentiometer Inputs
from Fluidwell bv
The F124 ratio controller has been designed to ensure that two flows are kept at the same ratio even if flows are changing. The Fluidwell ratio controller will show a strong influence of maintaining a good and constant quality of products and saves money on the blending components. The F124 is a key... [See More]
- Interface: Digital Front Panel; Computer Programmable (optional feature)
- Form Factor: Chassis; Stand-Alone; Field Mount
- Controller Type: Ratio Controller; Flow; Mix / Blending
- Inputs: 4
from ALMiG USA Corporation
Features: State of the art microprocessor operated. Very simple operator control. Parameter entry is protected by a code. Self-test of the compressor before every start-up for. Continuous monitoring of all parameters relevant to operation. Star-delta contactors, control voltage transformer,... [See More]
- Interface: Digital Front Panel
- Form Factor: Chassis
- Controller Type: Compressor Controller; Pressure
- Features: Multi-Function; Rate Indication/ Control
from Nordson EFD
ValveMate ™ dispense valve controllers put push-button adjustment of valve open time where it needs to be — at the valve. State-of-the-art features and capabilities maximize automated assembly machine efficiency and convenience. ValveMate Controllers provide the primary control of... [See More]
- Interface: Digital Front Panel
- Form Factor: Chassis; Stand-Alone
- Controller Type: Valve Controller
from Techcon
The TS570R is a Smart auger valve controller capable of controlling all Techcon TS5000 series and TS7000 series auger valves. With a universal power supply, it is a fully 'plug and play' system and can be used immediately, anywhere in the world. The TS570R Smart auger valve controller features an... [See More]
- Interface: Digital Front Panel
- Form Factor: Stand-Alone
- Controller Type: Dispensing
- Type: Programmable
from Iwaki America and Walchem, IWAKI America Inc
Walchem ’s WIND WebMaster ® sets a new standard for Industrial Water Treatment Controllers. The WIND WebMaster ® has a flexible multi-input/output platform, a wide range of analytical sensor measurement capabilities, and an extensive assortment of integrated communications and data... [See More]
- Interface: Digital Front Panel
- Form Factor: Chassis
- Controller Type: Industrial Water Controller
- Inputs: 8
from F.B. Leopold, a Xylem brand
The Leopold ® Valve PAC ® Electronic Valve Positioner/Controller is a single-loop controller specifically designed to provide automatic rate-of-flow control of various flows in a water treatment plant, but can be used on a wide range of process control applications. It can be panel-mounted... [See More]
- Interface: Switches; Digital Front Panel
- Form Factor: Chassis; Stand-Alone
- Controller Type: Filter Control; Flow
- Features: Rate Indication/ Control
from OMEGA Engineering, Inc.
The PHUCN600 Series multi-parameter controller is a microprocessor-based controller capable of measuring one of the following parameters, pH, ORP, or conductivity. When shipped from the factory, the PHUCN600 Series is not set to measure any one parameter.When the PHUCN600 Series is powered up for... [See More]
- Interface: Digital Front Panel
- Form Factor: Chassis (optional feature); DIN (optional feature); Pipe Mount
- Controller Type: Conductivity Controller; pH / ORP
- Inputs: 3
from Bijur Delimon International
Application. The SMC Controller is available in various timer and divider valve cycle count-based models, with adjustable on and off ranges to control electric motor-driven lubrication systems. The controller has the ability to detect abnormal operating situations. The unit has a lapsed time... [See More]
- Interface: Digital Front Panel
- Form Factor: Chassis
- Controller Type: Lubrication; Flow
- Type: DC Voltage Inputs; Switch / Relay Input
from Vogtlin Massflow USA
The new electronic red-y smart pressure controllers combine the reliable technology our of thermal mass flow controllers with electronic pressure control.The devices automatically control a predefined process pressure and at the same time measure and/or limit the flow rate.On-the-fly switching... [See More]
- Interface: Switches; Digital Front Panel; Computer Programmable; Network
- Form Factor: Stand-Alone; Control Valve Integrated
- Controller Type: Pressure + Flow Controller; Flow; Mix / Blending; Pressure; Vacuum
- Inputs: 1
from Penncat Corporation
InteliLiteNT models are the new integrated controllers for gen-sets operating in single standby mode. Based on the field proven InteliLite architecture, the new controllers fulfill every requirement needed for AMF and MRS applications – including modem and Internet control, user configuration... [See More]
- Interface: Digital Front Panel
- Form Factor: Chassis
- Controller Type: Generator Controller
- Communication / Port Type: USB and RS232
from Saint Clair Systems, Inc.
The ViscSense® Viscosity Control system features an intuitive touch screen controller and employs a compact acoustic wave sensor that can be installedin-line within a process, regardless of orientation, to continuously monitor viscosity and temperature. Unaffected by flow or vibration, this... [See More]
- Interface: Digital Front Panel
- Controller Type: Viscosity Controller
from ALMiG USA Corporation
Features: Very easy to operate. Microprocessor control unit ALMIG AIR CONTROL 2. Soft start through frequency transformer. Avoidance of current peaks during start-up. All electric connections tagged (name plates) for easy maintenance. Programming of all parameters through with the build in touchpad. [See More]
- Interface: Digital Front Panel
- Form Factor: Chassis
- Controller Type: Compressor Controller; Pressure
- Features: Multi-Function; Rate Indication/ Control
from Nordson EFD
Nordson EFD ValveMate ™ spray valve controllers allow the use of Low Volume Low Pressure air to the nozzle to achieve exceptional spray pattern definition. These controllers feature an adjustable 0-30 psi (0-2 bar) nozzle air pressure regulator that helps to provide high transfer efficiency... [See More]
- Interface: Switches; Digital Front Panel
- Form Factor: Chassis; Stand-Alone
- Controller Type: Valve Controller
from Techcon
The TS580R is a Smart PC Pump controller capable of controlling the Techcon TS8100 series PC Pump. With a universal power supply, it is a fully 'plug and play' system and can be used immediately, anywhere in the world. The TS580R Smart PC Pump controller features an intuitive touch screen interface... [See More]
- Interface: Digital Front Panel
- Form Factor: Stand-Alone
- Controller Type: Dispensing
- Type: Programmable
from F.B. Leopold, a Xylem brand
The Leopold ® AFC 5000 ® Filter Control System is designed to automatically control and monitor water and wastewater filter operation and backwash sequence. It is a totally integrated system that consists of the control console, programmable controller hardware, and software. The AFC 5000... [See More]
- Interface: Switches; Digital Front Panel; Computer Programmable
- Form Factor: Stand-Alone
- Controller Type: Filter Control; Flow
- Features: Rate Indication/ Control
from OMEGA Engineering, Inc.
bull;. Now with. Embedded Internet (EI Option CNi16D Series). •. First Full Series of Instruments with. Programmable Color Displays. •. User Friendly, Simple to Configure. •. High Quality! 5-Year Warranty Std. •. Free Software, Active X Controls. •. Selectable Full Autotune... [See More]
- Interface: Digital Front Panel; Network
- Form Factor: DIN
- Controller Type: Strain Controller; Environmental; HVAC; Temperature
- Type: DC Voltage Inputs; Current Loop (Transmitter) Excitation
from Bijur Delimon International
Application. The SMDC Mobile Controller is a multi-purpose programmable controller used with on-board mobile lubrication systems. The unit is energized by the vehicle or machine ’s ignition switch. Controller settings are saved whenever power is interrupted. Up to four operating modes can be... [See More]
- Interface: Digital Front Panel
- Form Factor: Chassis
- Controller Type: Lubrication; Flow
- Type: DC Voltage Inputs; Frequency Inputs
from Vogtlin Massflow USA
The new electronic red-y smart pressure controllers combine the reliable technology our of thermal mass flow controllers with electronic pressure control.The devices automatically control a predefined process pressure and at the same time measure and/or limit the flow rate.On-the-fly switching... [See More]
- Interface: Switches; Digital Front Panel; Computer Programmable; Network
- Form Factor: Stand-Alone; Control Valve Integrated
- Controller Type: Pressure + Flow Controller; Flow; Mix / Blending; Pressure; Vacuum
- Inputs: 1
from Saint Clair Systems, Inc.
PLC Based Controller for 1-2 stationsManual or Automatic ControlHigh, low, level alarm indicationAdjustable control valuesConverted value readout including: Zahn, Ford & Shell Cup, cPs, cSt, SSU etc. - Manual or Automatic Control- High, low, level alarm indication- Adjustable control values-... [See More]
- Interface: Digital Front Panel
- Controller Type: Viscosity Controller
from ALMiG USA Corporation
Features: Very simple operator control. Parameter entry is protected by a code. Self-test of the compressor before every start-up for. Continuous monitoring of all parameters relevant to operation. 7 channels for the switch-on/switch-off time for compressors. 7 channels for the pressure reduction. [See More]
- Interface: Digital Front Panel
- Form Factor: Chassis
- Controller Type: Compressor Controller; Pressure
- Features: Multi-Function; Datalogger; Is a Chart Recorder; Rate Indication/ Control; Totalizing (Length or Roll Diameter) Indication/ Control
from Techcon
The TS560R is a Smart spray valve controller capable of controlling all Techcon TS5520 series and TS5540 series spray valves. With a universal power supply, it is a fully 'plug and play' system and can be used immediately, anywhere in the world. The TS560R Smart spray valve controller features an... [See More]
- Interface: Digital Front Panel
- Form Factor: Stand-Alone
- Controller Type: Dispensing
- Type: Programmable
from F.B. Leopold, a Xylem brand
The Leopold ® SFC 2000 ® Supervisory Filter Control System is designed to continuously monitor and automatically control filter operation and backwash sequencing in water and wastewater treatment plants. The SFC 2000 brings PC-based control, operator interface, and data acquisition to the... [See More]
- Interface: Switches; Digital Front Panel; Computer Programmable
- Form Factor: Stand-Alone
- Controller Type: Filter Control; Flow
- Features: Rate Indication/ Control; PC-Based
from OMEGA Engineering, Inc.
bull;. First Full Series of Instruments with. Programmable Color Displays (Std.). •. User Friendly, Simple to Configure. •. High Quality! 5-Year Warranty. •. Free Software, Active X Controls. •. Selectable Full Autotune PID Control. •. High Accuracy: ±0.5 °C (0.9... [See More]
- Interface: Digital Front Panel; Network; Web
- Form Factor: DIN
- Controller Type: Strain Controller; Environmental; HVAC; Temperature
- Type: DC Voltage Inputs; Current Loop (Transmitter) Excitation
from Bijur Delimon International
Application. The SS4500 Controller is designed to operate, control and monitor all types of lubrication systems. The unit is programmed by the customer in the controller's set-up mode. The unit prompts several questions about the system and the customer tailors the SS4500's operating mode by... [See More]
- Interface: Digital Front Panel
- Form Factor: Chassis
- Controller Type: Lubrication; Flow
- Type: DC Voltage Inputs; Frequency Inputs
from Vogtlin Massflow USA
The new electronic red-y smart pressure controllers combine the reliable technology our of thermal mass flow controllers with electronic pressure control.The devices automatically control a predefined process pressure and at the same time measure and/or limit the flow rate.On-the-fly switching... [See More]
- Interface: Switches; Digital Front Panel; Computer Programmable; Network
- Form Factor: Stand-Alone; Control Valve Integrated
- Controller Type: Pressure + Flow Controller; Flow; Mix / Blending; Pressure; Vacuum
- Inputs: 1