-
Supplier: Accuris
Description: Engineering Specifications Procedure General Motors Divisional Identifiers for Non-Production Part Numbers
-
Supplier: SAE International
Description: General Motors has introduced a new front wheel drive seven speed dry dual clutch automatic transmission in 2014. The 250 Nm input torque rated gear box was designed and engineered for a global market in both front wheel drive and all-wheel drive configurations. The transmission has
-
Description: offices and hospitals. The standard is not in general intended for measurements in large auditoria such as concert halls. However, the operating conditions and operating cycles in Annex B can be used in such cases. The service equipment sound-pressure level is determined as the maximum
-
-
Supplier: CSA Group
Description: offices and hospitals. The standard is not in general intended for measurements in large auditoria such as concert halls. However, the operating conditions and operating cycles in Annex B can be used in such cases. The service equipment sound-pressure level is determined as the maximum
-
Supplier: SAE International
Description: This specification covers the tubing intended primarily for use as hydraulic brake lines on motor vehicles. It covers materials, manufacturing processes, and general properties required to meet the wide range of service encountered in automotive applications. To meet this need, it must
-
Supplier: SAE International
Description: This SAE Recommended Practice covers the tubing intended primarily for use as hydraulic brake lines on motor vehicles. It covers materials, manufacturing processes, and general properties required to meet the wide range of service encountered in automotive applications. To meet this
-
Supplier: Nidec Control Techniques
Description: system integration or the Commander SK - economical, easy-to-use general-purpose drive for standard applications such as fans, pumps and conveyors. These packaged drives are cost competitive, pre-engineered "AC In - AC Out" solutions with industry-standard filtered and
- Number of Axes / Motors: 1
- Maximum Output Voltage: 460 volts
- Rated Power: 36,999.99999999997 watts
- Continuous Output Current: 60 amps
-
Supplier: ASTM International
Description: system shall be used independently of the other. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and
-
Supplier: KSB AG
Description: valuable liquids in the chemical and petrochemical industry, in environmental engineering and the general industry. Overview of technical data Type of bearing Plain bearings Casing partition Radially split Drive Electric motor Drive frequency 50 Hz / 60 Hz Type of drive Electric
- Horsepower: 29.48484846786204 HP
- Maximum Discharge Flow: 13.208599999999999 to 792.516 GPM
- Maximum Discharge Pressure: 232.06032 psi
- Media Temperature: 284 F
-
Automation Controls Design and Installation Services - Data Network Design and Installation ServicesSupplier: Electro Standards Laboratories
Description: electromagnetic aircraft launch system, sensorless linear motor/motion control, power control and ocean energy harvesting systems. Innovative products developed for commercial and government. R&D Cutting-Edge Contract Engineering Services Electro Standards Laboratories (ESL)
- Industry: Aerospace, Consumer, General Industrial, Government, Marine, Military / Law Enforcement
- Services: Design, Model, R&D
- Capabilities: Embedded System Design, Industrial Communication Design, Project Management, System Integration
- Features: North America, Northeast US Only, United States Only
-
Supplier: SAE International
Description: software has been released under a General Public License and is freely available on the authors website. While the software has been developed primarily as a teaching tool, it is expected that future applications include general motor vehicle design, analysis, and performance
-
Supplier: KSB AG
Description: explosive, toxic, volatile or valuable liquids in the chemical and petrochemical industry, in environmental engineering and the general industry. Overview of technical data Type of bearing Plain bearings Casing partition Radially split Drive IEC standardized motor Drive
- Horsepower: 93.8154269431974 HP
- Maximum Discharge Flow: 4.402866666666667 to 1,320.8600000000001 GPM
- Maximum Discharge Pressure: 362.59425 psi
- Media Temperature: 662 F
-
Supplier: Boston Gear
Description: Overview Clutches and brakes are a prudent addition to constant speed motor/reducer drives and adjustable speed systems - and are the right choice when high inertia loads exist or frequent starts and stops exceed the capabilities of standard motors. Boston Gear's clutch and
- Torque Rating: 20 to 150 Ft-lbs
- Rotational Speed: 3,600 to 4,500 rpm
- Shaft: In-line
- Application: Industrial / General Purpose
-
Supplier: Conductix-Wampfler
Description: which impact system components Typical Applications: Machine frame in conveyor technique Frame with drive and control units in general engineering Conveyor systems Machine tools Constructions and quality characteristics: The vulcanization guarantees the highest cohesiveness between
- Type: Stud Plate Mount
- Features: Threaded Stud
- Application: Vibration Isolation
-
Supplier: OMEGA Engineering, Inc.
Description: date and time, channel number, scale marking, tag number, proper engineering units, chart speed, alarm value, and complete program list. The non-contact, ultrasonic pen-position transducer is more accurate than standard pen mechanisms. The wear-free, brushless DC servo-motor
- Analog Input Channels: 6 #
- Accuracy: 0.1 % FS
- Operating Temperature: 32 to 122 F
- Humidity Measurement Range: 20 to 80 %
-
Supplier: Goulds Water Technology, a xylem brand
Description: the field without disturbing the system piping arrangement. Motor Coupling: Two-piece shaft coupling allows for replacement of mechanical cartridge-type seal without removing motor. Coupling is precision balanced for vibration-free operation. Enhanced Impeller: The redesign of this
- Pump Type: Centrifugal Pumps, Turbine Pumps
- Features: Water Pumps
-
Supplier: Sunnen Products Company
Description: 13.8 in) Diameter Range (I.D.) optional: Up to 550 mm (21.654 in) Diameter Range (O.D.) standard: 60 – 400 mm (6.24 – 15.8 in) Diameter Range (O.D.) optional: 350 – 600 mm (13.8 – 23.6 in) Spindle Motor: 3 kW (4 Hp) FEATURES & BENEFITS A PLC control and digital display allow complete
- Power: 4.7 HP
- AC Voltage & Phase: 460 / 480 V 60 Hz, 50 Hz / International Power, Three-Phase
- Automation / Material Handling: Automatic / Indexing, PLC
- Applications / Material Abraded: Automotive, Metals / Metalworking
-
Supplier: International Thermal Systems LLC.
Description: The ProCon Industrial Parts Washer Conveyor Belt Systems are designed to satisfy the most difficult part cleaning applications, with 120 standard combinations. The combinations include wash, wash/rinse and wash/rinse and seal and are offered in a wide range of belt widths and part height
- Machine Type: Complete Machine / Turnkey System, Degreasers, Spray Washers
- Part Loading: Conveyor
- Source: Electric
- Machine Mounting: Floor / Skid
-
Supplier: International Thermal Systems LLC.
Description: The ProCon Industrial Parts Washer Conveyor Belt Systems are designed to satisfy the most difficult part cleaning applications, with 120 standard combinations. The combinations include wash, wash/rinse and wash/rinse and seal and are offered in a wide range of belt widths and part height
- Wash Tank Capacity: 145 to 267 gallons
- Internal Width: 6 to 30 inch
- Internal Depth / Height: 6 to 18 inch
- Part Capacity - Weight: 50 lbs
-
Supplier: ValueTronics International, Inc.
Description: Accuracy: 0.3%+0.3%F.S. General-Short Circuit Current: 30A; 300A Input Rating: 1Ø 100/200Vac ± 10% VLN, 47~63Hz; 1Ø 115/230Vac ± 10% VLN, 47~63Hz Dimension (H x W x D): 177 x 440 x 589 mm / 6.9 x 17.3 x 23.2 inch Weight: 30 kg / 66.13 lbs Safety & EMC: CE Chroma's 63200 series of programmable
- Load Bank Type: DC, Programmable
Find Suppliers by Category Top
Featured Products Top
-
safety solution. Let the tec.nicum Engineering Services group of Schmersal help you take that step into the world of machine safety with this one day course. Upon completion of this course, learners will be able to: List the 5 elements of the (read more)
Browse Instructional Seminars and Training Services Datasheets for Schmersal Inc. -
RIGOROUS QUALITY ASSURANCE Quality Assurance is in our blood and it’s what supports our testing capabilities. General Plastics has eight decades of experience performing quality assurance to the most exacting standards for our own products. We couple consistent performance (read more)
Browse Material Testing Services Datasheets for General Plastics Manufacturing Co. -
starts! At Tecnotion, customization ranges from adapted cables and optimized windings to completely tailor-made direct drive motors developed by a multidisciplinary engineering team. Because every application has its own boundaries. The motor should fit those boundaries - not the other way around. Have an application that doesn't quite fit a standard solution? Let's discuss it! (read more)
Browse Linear Motors Datasheets for Tecnotion -
range of training courses on numerous topics, including General Machine Safety, ISO13849, Safety Circuits and Wiring, and Understanding and Conducting Risk Assessments; with customer specific in-house training seminars; and webinars. Consulting With regard to technical (read more)
Browse Engineering Consulting Services Datasheets for Schmersal Inc. -
Backer Marathon is pleased to present our line of premium temperature sensors. We offer standard general purpose thermocouples, mineral insulated thermocouples, and RTDs. Backer Marathon has hundreds of different models in stock and offers quick turnaround, usually 48 hours or less (read more)
Browse Temperature Probes Datasheets for Backer Marathon, Inc. -
thermal transfer systems. Capabilities include complete engineering, manufacturing in house and field service for startups. Standard document package includes P&ID, General arrangement drawings, equipment and instrument data sheets, and installation and operation manual (IOM). (read more)
Browse Fluid Heat Transfer Systems Datasheets for Gaumer Process -
tailor to your needs and wishes. Quality Quality and durability are our top priorities. Each product is manufactured to the highest quality standards. Flexible Our diverse manufacturing and stock supplies allows us to produce (read more)
Browse Gas Springs Datasheets for Bansbach Easylift® -
rigid standards are used in Smith Bearing® products. ENGINEERING Extensive experience in our engineering department allows Smith Bearing® to work closely with endusers and OEMS (original equipment manufactures) in order to offer the best solution for their (read more)
Browse Aerospace Bearings Datasheets for Accurate Bushing Company, Inc. -
stairlifts. Fully customizable stairlift motors to suit all requirements While we have many standard geared motor solutions that are suitable for this application, we excel when it comes to designing bespoke gearboxes and motors for stairlifts. If you need something special (read more)
Browse DC Motors Datasheets for parvalux by maxon -
degradation. General Plastics’ FR-3700 flame-retardant foam shows what happens when workmanship, rigorous engineering, and exact formulation meet real-world safety requirements. This foam (read more)
Browse Protective Liners and Lining Systems Datasheets for General Plastics Manufacturing Co.
Conduct Research Top
-
Electric Motor Codes and Standards
Electric motors are often required to meet various industry standards and national codes in addition to specific application requirements. The more common of these standards and codes are explained in this Engineering Letter. Also included are some general motor dimensions and weights for reference
-
Motors and Drives: A Practical Technology Guide
manufacturing processes. The text has roots in the practical side of drive and motor use, with the "design engineering" side of technology, presented in commonly used terms. An attempt is made to help the reader "start from scratch," gathering and reviewing a collection of basic information - from basic
-
EETimes.com | Electronics Industry News for EEs & Engineering Managers
an already-powerful consortium of automotive and electronics companies. They will join General Motors, DaimlerChrysler, BMW, Motorola, Philips Semiconductors and Bosch Automotive Group in the FlexRay Consortium, bringing FlexRay to the verge of de facto industry standard. Deep-submicron flows need
-
The History of the Rotary Solenoid
realizing it was not for him. General Electric promptly hired him in Fort Wayne, where he became a designer and taught himself advanced mathematics. He moved on to find the Leland Electric Company, which made fractional horsepower electric motors. He sold his Leland stock after the war to focus on his
-
Derating For Real World Conditions
by. re-settable thermal controls. » Designers and manufacturers of battery packs. » Designers and manufacturers of small motors used. in various products. » Designers and manufacturers of lighting products. » Prototype Engineers charged with testing and selecting. thermal control devices. Derating for Real