Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Supplier: Joyce/Dayton Corp.
Description: Joyce ductile iron pillow blocks include self-aligning replaceable bearings that are pre-lubricated with lithium grease. They include steel retainers, and nitrile rubber seals with steel guards. Pillow block supports are suitable for shaft supports and bearing
- Base to Bore Center Distance: 1.06 to 1.44 inch
- Bearing: Bearing Steel (52100)
- Bearing / Housing Features: Self-aligning Bearing
- Bearing Type: Ball Bearing
-
Supplier: Timken Company (The)
Description: roller bearing with improved geometry and raceway finish for maximum load capacity and service life. Timken manufactures pillow blocks in two main styles: SAF and SDAF. The larger SDAF block is suggested for extreme heavy duty applications. Size range: 1.37795 in. to 11.811 in.,
- Bearing / Housing Features: Split Housing
- Bearing Type: Spherical Roller Bearing
- Housing: Cast Iron
- Nominal Shaft / Bore Size: 1.38 to 39.37 inch
-
Supplier: National Precision Bearing, Inc.
Description: , MechPT™ line of pillow-block bearings meet these rigorous requirements. The MechPT™ bearings come in stainless steel and composite coated configurations that are easy to clean, corrosion resistant and come with an FDA approved food grade grease. MechPT™ creates power transmission
- Bearing Type: Plain Bearing
- Housing: Cast Iron, Plastic / Polymer, Stainless Steel
- Relubricatable / Grease Fitting: Yes
-
-
Supplier: Reid Supply
Description: Mounted bearings and housings with rolling bearings support a rotating shaft, which can be bolted on a machine frame or any other substurcture. There is no need to precisely machine a bearing housing in a surrounding casing. This makes these solutions cost-efficient and easy to use, while
- Bearing Type: Ball Bearing
- Center to Center Mounting Hole Distance: 4.25 inch
- Housing: Other
- Maximum Load: 4390 lbs
-
Supplier: Reid Supply
Description: Mounted bearings and housings with rolling bearings support a rotating shaft, which can be bolted on a machine frame or any other substurcture. There is no need to precisely machine a bearing housing in a surrounding casing. This makes these solutions cost-efficient and easy to use, while
- Bearing Type: Ball Bearing
- Center to Center Mounting Hole Distance: 4.69 inch
- Housing: Other
- Maximum Load: 5740 lbs
-
Supplier: Reid Supply
Description: Mounted bearings and housings with rolling bearings support a rotating shaft, which can be bolted on a machine frame or any other substurcture. There is no need to precisely machine a bearing housing in a surrounding casing. This makes these solutions cost-efficient and easy to use, while
- Bearing Type: Ball Bearing
- Center to Center Mounting Hole Distance: 3.47 inch
- Housing: Other
- Maximum Load: 2860 lbs
-
Supplier: Reid Supply
Description: Mounted bearings and housings with rolling bearings support a rotating shaft, which can be bolted on a machine frame or any other substurcture. There is no need to precisely machine a bearing housing in a surrounding casing. This makes these solutions cost-efficient and easy to use, while
- Bearing Type: Ball Bearing
- Center to Center Mounting Hole Distance: 5 inch
- Housing: Plastic / Polymer, Other
- Nominal Shaft / Bore Size: 1.44 inch
-
Supplier: SKF/North America
Description: SAF and SAW split pillow (plummer) block housings are popular SKF bearing housings with inch dimensions, developed to be the first choice for design, quality and economy. SAF and SAW housings enable the incorporated bearings to achieve maximum service life with less need for
- Bearing / Housing Features: Plummer Block, Split Housing
- Bearing Type: Ball Bearing, Spherical Roller Bearing, Other
- Housing: Cast Iron, Other
- Nominal Shaft / Bore Size: 1.19 to 10.5 inch
-
Supplier: NSK Americas
Description: outside diameter and extended inner ring mounted in a pillow block or flanged housing. The spherical fit accommodates initial misalignment. A variety of locking methods are available for close-fit shaft mounting as well as a complete range of sealing options for varying
- Bearing: Bearing Steel (52100), Bronze, Sintered, Stainless Steel
- Bearing / Housing Features: Plummer Block
- Bearing Type: Plain Bearing, Ball Bearing, Cylindrical Roller Bearing, Needle Roller Bearing, Tapered Roller Bearing
- Housing: Cast Iron, Other
-
Supplier: igus® inc.
Description: Special properties Save time during assembly and disassembly of shafts, no more threading Low profile and lightweight High rigidity and fatigue strength Spherical ball material is iglide® J for low moisture absorption Ideal for outdoor use Dimensional series E according to DIN ISO 12240
- Bearing: Other
- Bearing / Housing Features: Self-aligning Bearing, Split Bearing
- Bearing Type: Plain Bearing
- Center to Center Mounting Hole Distance: 1.46 to 2.52 inch
-
Supplier: NationSkander California Corporation
Description: FYH Pillow Block Bearing, Low shaft heights with set screws Wide Inner Ring, Cylindrical bore with eccentric locking collar, Bearing is 55mm Inner Diameter. Item: NAPK211 Bearing Type: Pillow Block with eccentric locking Bolt Size: M16 Basic Load (Cr): 43.4 KN
-
Supplier: igus® inc.
Description: with retaining rings according to DIN 472 Mounting bolts DIN 912-8.8, lock washer DIN 7980 Recommended tolerance for the shaft: h6-h10
- Bearing Housing: Pillow Block
- Bearing Length: 2.44 to 6.93 inch
- Bearing Type: Plain / Journal
- Bearing Width: 1.38 to 4.25 inch
-
Supplier: Dover Flexo Electronics, Inc.
Description: Low maintenance design - lifetime lubricated Corrosion-resistant stainless steel and aluminum construction Load ratings from 100 - 5000 lbs.(450 - 22250N) Available in two frame sizes Entire length of top plate is clear for pillow block installation only along center line Use with live
- Application: Web Control
- Category of Device: Sensor / Transducer
- Force / Load Rating: 100 to 5000 lbs
- Force Measured: Tension
-
Supplier: NationSkander California Corporation
Description: FYH Pillow Block Bearing, Low shaft heights with set screws Wide Inner Ring, Cylindrical bore with eccentric locking collar, Bearing is 45mm Inner Diameter. Item: NAPK209 Bearing Type: Pillow Block with eccentric locking Bolt Size: 1/2" Basic Load (Cr): 34.1 KN
-
Supplier: WD Bearing Group
Description: Pillow blocks, the most commonly used type of mounted units, are housings which have a bearing fitted into them. They are designed to provide shaft support where the mounting surface is parallel to the shaft axis. Typically manufactured from cast iron or cast steel, the
-
Supplier: Triangle Manufacturing Company
Description: Pillow block mounted bearings are attached on a line parallel to the rotating shaft’s axis. Used to provide load support for that axis, pillow block mountings hold a variety of sizes for sintered iron, bronze or nylon self-aligning bearings, as well as any other
- Base to Bore Center Distance: 0.5620 inch
- Bearing: Bronze, Sintered
- Bearing / Housing Features: Self-aligning Bearing
- Bearing Type: Plain Bearing
-
Supplier: igus® inc.
Description: Special Features Tandem design Enclosed anodized aluminum housing, long design 2 JUM-02 liners made of iglide® J Recommended tolerance for the shaft: h6-h10
- Bearing Type: Linear Bearing
- Bore: 0.4724 to 1.97 inch
- Outside Diameter / Length: 0.4724 to 1.97 inch
- Overall Width / Height: 2.36 to 5.71 inch
-
Supplier: SKF/North America
Description: Cast iron flange units are designed to support shafts through walls, bulkheads and other flat surfaces. The medium duty flange housings accommodate a larger bearing for a given shaft size, resulting in a greater load carrying capacity. Both series are supplied with a grease fitting for
- Bearing: Steel
- Bearing Mounting Configuration: 4-Bolt
- Bearing Type: Ball Bearing
- Housing: Cast Iron
-
Description: Specifies design characteristics (classification, dimensions, materials, designation) for pillow blocks for the size ranges 9 to 28 and 35 to 71, as well as design characteristics for shafts. Is applicable to pillow blocks used mainly in electrical and turbo
-
Supplier: Givens Engineering Inc.
Description: The STD-BB ("Bearing Block") series of mounted bearings leverage the benefits of both pillow blocks and slewing bearings. Each bearing block features an integral shaft which is supported by a pair of sealed roller bearings. Each roller bearing is pressed into a
- Bearing Type: Cylindrical Roller Bearing
- Center to Center Mounting Hole Distance: 3.38 inch
- Housing: Aluminum
-
Supplier: Emerson Bearing Co.
Description: Standard Duty, high shaft height with set screw lock. Available with: Set screw or eccentric locking collar. Corrosion resistant housing and bearing options include Cast iron, Stainless Steel, Thermoplastic, and Nickel plating. B-type seals or L3 triple lip seals available for extra sealing
- Base to Bore Center Distance: 1.94 inch
- Center to Center Mounting Hole Distance: 5.44 inch
- Nominal Shaft / Bore Size: 1.57 inch
- Shaft Securing Method: Setscrew
-
Supplier: Bunting Bearings, LLC
Description: engineers: Self-Alignment A special casting technique which locks the bearing inside the aluminum housing, yet allows sufficient freedom of movement to enable the bearing to position itself to line up with greatly varying shaft directions. This self-aligning feature saves by eliminating
- Base to Bore Center Distance: 0.3750 to 1.88 inch
- Bearing: Bronze, Sintered
- Bearing Type: Plain Bearing
- Center to Center Mounting Hole Distance: 1.12 to 5.5 inch
-
Supplier: Lee Controls, LLC
Description: leader in linear roller bearing technology! For standard linear movement or severe shaft deflection movement, use self-aligning LEE LINEAR Single Pillow Blocks.
- Bearing Features and Options: Adjustable Preload, Lubrication Port, Recirculating Bearings, Self Aligning, Wipers / Seals, Other
- Bearing Housing: Pillow Block
- Bearing Length: 1.5 inch
- Bearing Width: 2 inch
-
Supplier: Nook Industries, Inc.
Description: EXCEL™ Linear Bearings provide high efficiency and smooth operation in a variety of linear guidance applications. EXCEL™ Flange-Mount Pillow Blocks offer an installation alternative to standard foot-mount pillow blocks when the mounting surface is perpendicular to the
- Bearing Features and Options: Lubrication Port, Self Aligning, Wipers / Seals
- Bearing Housing: Pillow Block
- Bearing Length: 4 inch
- Bearing Type: Bushing, Ball
-
Supplier: RegalRexnord
Description: 5.91" Mounted Spherical Roller Bearing, Cast Iron 4-Bolt Split Pillow Block, Direct Shaft Mounted, Triple-Ring Metal Labyrinth Seal
- Base to Bore Center Distance: 7.5 inch
- Bearing / Housing Features: Split Housing
- Bearing Type: Spherical Roller Bearing
- Center to Center Mounting Hole Distance: 4.62 inch
-
Supplier: Quality Bearings & Components
Description: Frelon® Lined PILLOW BLOCKS-OPEN TYPE – INCH • Self-Aligning • Anodized Aluminum Body 6061-T6 • Frelon® Lined Aluminum Bearing • Self-Lubricating NOTE: For parallel shaft applications, use Compensated Series
- Bearing Features and Options: Self Aligning
- Bearing Housing: Pillow Block
- Bearing Length: 6 inch
- Bearing Type: Linear Motion Guide
-
Supplier: Changzhou Mouette Machinery Co., Ltd.
Description: 2-Bolt Flange Mounting Bearing Eccentric Locking Collar with Wide Inner Ring Product Description: 2-Bolt Flange Mounting Bearings are designed to help provide support for shafts that run perpendicular to the bearing mounting surface. Main Features: Standard duty unit, eccentric
- Bearing: Stainless Steel
- Bearing Type: Ball Bearing
- Center to Center Mounting Hole Distance: 7.24 inch
- Housing: Stainless Steel
-
Supplier: KG International FZCO
Description: Plummer Block Housings help to form Bearing units, with Self-aligning Ball Bearings and Spherical Roller Bearings. They permit flexibility in the choice of bearing, location on Shaft and lubrication. Made on modular princeiple using Cast Iron HT 200 JIS 5501, KG Housings are available
- Base to Bore Center Distance: 1.38 to 3.25 inch
- Bearing Type: Ball Bearing, Spherical Roller Bearing
- Center to Center Mounting Hole Distance: 3.75 to 8.5 inch
- Nominal Shaft / Bore Size: 0.5000 to 3 inch
-
Supplier: CSA Group
Description: Specifies design characteristics (classification, dimensions, materials, designation) for pillow blocks for the size ranges 9 to 28 and 35 to 71, as well as design characteristics for shafts. Is applicable to pillow blocks used mainly in electrical and turbo
-
Supplier: Nook Industries, Inc.
Description: Single shaft unsupported with two pillow blocks.
- Axis Configuration: X Axis Only
- Bearing Type: Metal Bushing
- Carriage Load: 2752 lbs
- Drive Specifications: None
-
Supplier: JTEKT North America, Inc.
Description: discrete bearing but also compatibility with peripheral parts is needed. JTEKT provides services of each product in total as a general manufacturer of the bearing, drive shaft and oil seal.
- Bearing: Bearing Steel (52100), Stainless Steel
- Bearing / Housing Features: Plummer Block
- Bearing Type: Plain Bearing
- Housing: Cast Iron, Pressed Steel, Stainless Steel
-
Supplier: Montalvo Corporation
Description: today. Dead Shaft-Idler Load Cells are available in 3 mounting configurations: Standard Mount, Flange Mount, or Split Pillow Block Mount. Features Industry Leading Resolution Multiple Mounting Options Maximum Repeatability Stainless Steel
- Application: Web Control
- Category of Device: Sensor / Transducer
- Force / Load Rating: 25 to 500 lbs
- Force Measured: Tension
-
Supplier: J. W. Winco, Inc.
Description: are typically used to support a rotating shaft or tube as part of a conveyor contruction.
-
Supplier: Leister USA
Description: Designed for construction site conditions Handy, robust and light Digital display of elongation, peak force, tear force, test speed and position With optional data recording on a memory card Optionally for geotextiles
- Data Storage: Yes
- Display Type: Digital Readouts
- Local Interface: Digital Front Panel
- Shaft Applications: "Live" Shaft Applications
-
Supplier: NB Corporation of America
Description: load plates to set the desired clearance level between ball and shaft components. Together, these unique features provide TOPBALL linear pillow block bearings with many key benefits, including: Longer travel life Likewise, higher load capacities also translate to longer travel
- Bearing Housing: Flanged, None / Open, Rectangular, Pillow Block
- Bearing Length: 0.5630 to 6.93 inch
- Bearing Type: Bushing, Ball
- Bearing Width: 0.3740 to 6 inch
Find Suppliers by Category Top
Featured Products Top
-
BBXBLK-UCP... Series, are made of cast iron housings, solid base dual seal type pillow blocks. They are designed to fit shafts ranging from1/2" to 3-1/2" in diameter. The height from the bottom of the unit to the shaft centerline ranges (read more)
Browse Pillow Block Bearings Datasheets for Quality Bearings & Components -
Precision Engineered for Versatility Eccentric Locking for Pinpoint Accuracy: Ensure precise shaft positioning with our eccentric locking mechanism. Durable Stainless Steel Construction: Crafted from robust 440C and 420 (read more)
Browse Pillow Block Bearings Datasheets for Changzhou Mouette Machinery Co., Ltd. -
Series) Code: UC200 (Light) & UC300 (Heavy) Tailored to your environment: UC200 for small-scale, UC300 for heavy-duty. 120° angle design ensures a secure and stable shaft connection. Widely employed in textile and ceramic machinery and various (read more)
Browse Pillow Block Bearings Datasheets for Splendor Industrial Bearing Co., Ltd. -
External spherical ball bearings can be divided into three categories according to the method of cooperation with the shaft: First, with the top wire outer spherical ball bearing its code for: UC200 series (light series), UC300 series (heavy series), and deformation products UB (SB) 200 (read more)
Browse Pillow Block Bearings Datasheets for Splendor Industrial Bearing Co., Ltd. -
production faster. SDP/SI offers a wide range of miniature to small bearings available off-the-shelf. Miniature pillow block mounted ball bearings are lightweight, corrosion resistant, and double shielded. Perfect for (read more)
Browse Pillow Block Bearings Datasheets for Stock Drive Products & Sterling Instrument - SDP/SI -
. Miniature sized profile guides aren’t capable of moving 1000 lb+ loads for any extended length of time, and a large diameter shaft and pillow block combination isn’t needed for moving a 10 lb medical sample. Once that is determined, the more specific details of the (read more)
Browse Linear Slides and Linear Stages Datasheets for NB Corporation of America -
Quality Bearings & Components (QBC) is a stocking distributor of the world's leading bearings and linear motion products manufactureres. Standard catalog items offered include pillow blocks, 4-bolt flange mounting blocks, 2-bolt flange mounting blocks, and the paired ball bearing inserts (read more)
Browse Insert Bearings Datasheets for Quality Bearings & Components
Conduct Research Top
-
New Spins on Bearing Technology (.pdf)
Nook Industries provides a complete selection of inch and metric Ball Screws, Roller Screws, Acme Screws, Lead Screws, End Bearing Supports, Precision Locknuts, Worm Gear Screw Jacks, Electric Actuators, HRC 60 Linear Shafting, Linear Bearings and Pillow Blocks to the Linear Motion Industry
More Information Top
-
CR4 - Thread: Need to Match 2.375-Inch Diameter Shaft to Split Base Type Pillow Block Mounting
Pathfinder Tags: bearing pillow block shaft split base pillow block .
-
http://dspace.mit.edu/bitstream/handle/1721.1/37543/33430506-MIT.pdf?sequence=2
A flexible coupling was used to connect the dynamometer shaft to the pillow block shaft .
-
http://dspace.mit.edu/bitstream/handle/1721.1/41028/43354026-MIT.pdf?sequence=2
holes on the sliding blocks did not line up with the holes on the pillow block shaft supports, so an .
-
Large scale steam valve test: Performance testing of large butterfly valves and full scale high flowrate steam testing
The only significant deviation from the nearly symmetrical disc shape is the shaft pillow blocks , which are relatively well faired, with 45' slopes on both the upstream and downstream sides.
-
http://dspace.mit.edu/bitstream/handle/1721.1/36520/32600587-MIT.pdf?sequence=2
Arm shaft Pillow block base Arm motor shaft Arm motor block Arm motor plate Arm channel .
-
Thorium utilization program. Quarterly progress report for the period ending May 31, 1977
Preliminary Investigations of carbon-graphite bearings have continued for their use in a pitman shaft pillow block as a direct replacement of the present bronze bearing and thrust washer.
-
SLSF loop handling system. Volume IV. Analysis verifications and supporting appendices. [LMFBR]
… Block Anchor Rod Load Cell Cover Plate Input Shaft Collar Collar Gasket Sprocket Pullet Pin - Chain Sprocket Pad Shaft Bracket Collar Pad Sprocket Shaft Shaft Spacer Spacer Retainer Retainer Mounting Plate Gear Pillow Block Pillow Block Sprocket Gear Shaft Pillow Block Sprocket .
-
Wavelength Scaling and Square/Stripe and Grain Mobility Transitions in
Vertically Oscillated Granular Layers
ACCELEROMETER DOUBLE LINEAR BEARING PILLOW BLOCK TUBULAR SHAFT .