Products & Services

See also: Categories | Featured Products | Technical Articles | More Information

Conduct Research Top

  • Silicon RF Power MOSFETS
    Silicon RF Power MOSFETS. Providing general guidelines for understanding the design and operation of the transistors, this book describes the physics, design considerations and RF performance of silicon power MOSFETs.
  • Soft-Start Controller For Switching Power Supplies
    driven by the power supply is capacitive, the problem is exaggerated due to the large transient currents required to charge the capacitive load. In extreme instances, the repeated high stress of start-up can result in catastrophic failures in the driver section, typically, the power MOSFET transistors
  • TO-3P/220/247/254/257/258/264 Aluminum Nitride Ceramic Thermal Pads For MOSFET Transistor IGBT Transistor Heat Sink
    contact. The pads are made of ceramic materials such as alumina ceramic and aluminum nitride, which help in providing enhanced thermal conductivity and excellent insulation performance. Typical applications include Power Devices, Integrated Circuit (IC) chip packaging heat conduction, MOSFET Transistor
  • What are MOSFETs? - Types and Features of High Voltage Super-Junction MOSFET
    In the previous section, the product positioning of Si-MOSFETs, IGBTs and SiC-MOSFETs, which in recent years have become the most important power transistors, was reviewed, and super-junction MOSFETs (hereafter "SJ-MOSFETs"), which are representative of the latest high-voltage Si MOSFETs, were
  • Considerations for Driving Power MOSFETs in High-Current, Switch Mode Regulators
    The low on-resistance and high current carrying capability of power MOSFETs make them preferred switching devices in SMPS power supply design. However, designing with these devices is not as straightforward as with their bipolar counterparts. Unlike bipolar transistors, power MOSFETs have
  • Determining MOSFET Driver Needs for Motor Drive Applications
    driver is normally in the form of a power transistor. This can be a bipolar transistor, MOSFET or an Insulated Gate Bipolar Transistor (IGBT). In some small Brushless DC motor or stepper motor applications, the MOSFET driver can be used to directly drive the motor. For this application note, though
  • Eliminating EMC By Replacing A MOSFET With A GaN Transistor
    It is not unusual for a design already in production to end up back with the engineering development team. In this case, the product is a 3-kW power conversion unit with a standard boost PFC that needed rework for it to comply with tighter EMI specifications. The manufacturing company involved
  • What are MOSFETs? - Super-junction MOSFET
    Features and Positioning of Power Transistors

More Information Top

Lock Indicates content that may require registration and/or purchase. Powered by IHS Goldfire