Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Supplier: Parco Scientific Company
Description: Digital Count Down Timer
- Trainer Type: Training Kit / Modular Unit
-
Supplier: Airotronics
Description: The TGQB is a recycle timer with a selectable cycle length and adjustable "On" time as a percentage of the total cycle from 1% to 99%. Available relay ratings of 10 amps. Relay common is internally connected to the input voltage terminal to minimize terminal count. Adjustment
- Display Type: Non-indicating
- Functions: Recycle Timer / Percentage Timer
- Maximum Time Setting: 24 hours
- Minimum Time Setting: 0.1000 seconds
-
Supplier: Taylor Precision Products LP
Description: Features Recalls last timing event. 0.8" LCD readout. Counts up or counts down. Clip/magnet/stand positioning. Operates on 1 "AAA" battery (included).
-
-
Supplier: Taylor Precision Products LP
Description: Features Minute/second timing. 0.7" LCD readout. Counts up or counts down. Clip/magnet/stand positioning. Operates on 1 AAA battery (included).
-
Supplier: Red Lion Controls, Inc.
Description: 4" High Red LED Digits (adjustable intensity) 6 Digit Display for Bi-directional Timing 5 Digit Display for Cycle Counting Programmable Scaling and Decimal Points Count Speeds up to 500Hz User Defined Setpoint Output
- Character Height: 102 mm
- Display Type: Matrix
-
Supplier: Red Lion Controls, Inc.
Description: 2.25" High Red LED Digits (adjustable intensity) 6 Digit Display for Bi-directional Timing 5 Digit Display for Cycle Counting Programmable Scaling and Decimal Points Count Speeds up to 500Hz User defined Setpoint Output
- Character Height: 57.15 mm
- Display Type: Matrix
-
Supplier: Delta Electronics (Americas)
Description: CTA Timer/Counter/Tachom eter is able to receive external input signals and calculate the times of events, frequency and driving speed. CTA can be applied to batch counting, total counting, length measurement, position control, accurate timing, rotation speed and so on. CTA
- Display Type: LED
- Functions: Counter / Timer Combination
- Mounting: DIN Rail Mount, Panel / Flange Mount
- Number of Digits (or Characters): 6
-
Supplier: Taylor Precision Products LP
Description: Features Digital timer times up to four events simultaneously. Each timer counts up to 9 hours, 59 minutes and 59 seconds. Loud 100 decibel alarms with a distinctive ring for each timer. Visual alerts - individual lights flash when each timer reaches zero
-
Supplier: Taylor Precision Products LP
Description: Features Smooth glass surface with touch sensitive buttons. Large 1.5" high x 2.25" wide display. Times up to 19 hours, 59 minutes. 12 hour clock feature. Counts up or counts down. Memory function recalls last set timing event. Stand or hang with magnet. Operates on 1 LR44 battery
-
Supplier: JORC Industrial LLC
Description: The D-LUX is our digital timer and offers superior programming features ranging from 0.1 second to 99 hours in four different time cycle options. The time cycle indication demonstrates the time in a count down mode and a illuminated LED display window.The D-LUX is our digital
- Display Type: LED
- Maximum Time Setting: 99 hours
- Minimum Time Setting: 0.1000 seconds
- Mounting: DIN Rail Mount
-
Supplier: Traceable® Products
Description: Innovative countdown timer talks. It counts down, talks, times up, and tells time-of-day with Traceable® precision. Never again glance at your timer. During countdown, voice reporting frequency is every hour until 1 hour is reached, every 10 minutes until 10 minutes is reached,
- Digit Height: 0.5000 inches
- Display Type: LCD
- Field Selectable Time Ranges: Yes
- Functions: Elapsed Time Meter / Indicator, Other
-
Supplier: Traceable® Products
Description: Small timer- large display At the press of a button, timer displays countdown alarm time/stopwatch (count-up) time, and time-of-day (AM/PM and 24-hour format). Accuracy is 0.01%. High-decibel alarm sounds for 1 minute. Count down or up to 23 hours, 59 minutes, 59 seconds
- Digit Height: 0.3750 inches
- Display Type: LCD
- Field Selectable Time Ranges: Yes
- Functions: Elapsed Time Meter / Indicator
-
Supplier: Traceable® Products
Description: This compact unit is a timer, stopwatch, and clock. Timer can be programmed to count down from 23 hours, 59 minutes, 59 seconds with 1-second resolution. Accuracy is 0.01%. At zero, a 1-minute alarm sounds and thru-zero timing automatically begins counting up, displaying
- Audible or Visual Alarms: Yes
- Display Type: LCD
- Field Selectable Time Ranges: Yes
- Functions: Elapsed Time Meter / Indicator
-
Supplier: Traceable® Products
Description: Save time on repetitive tests with Traceable® Memory Timer Unique timer counts down with an alarm and remembers the setting. Program countdown times from 24 hours to 1 minute in increments of a minute. The bright, crisp, 1/3-inch-high LCD digits read in hours, minutes, and
- Audible or Visual Alarms: Yes
- Display Type: LCD
- Field Selectable Time Ranges: Yes
- Functions: Elapsed Time Meter / Indicator
-
Supplier: Airotronics
Description: The MC series Coin Counting Timers combine a Single Shot timing mode and coin counting capability with microprocessor technology for reliability and accuracy. Two 4-position binary dipswitches allow users to select the number of coins as well as the time period. The switches can
- Display Type: Non-indicating
- Field Selectable Time Ranges: Yes
- Functions: One Shot Timer, Counter / Timer Combination
- Maximum Time Setting: 0.1250 hours
-
Supplier: Specialty Product Technologies
Description: The CX200 is a microprocessor based timer/counter housed in a standard 15 terminal CYCL-FLEX® plug-in case. Time or count operation, time range, and standard or reverse start operation is selected by 7 miniature rocker switches located inside the unit housing.
- Digit Height: 0.5000 inches
- Display Type: LCD
- Functions: Other
- Maximum Time Setting: 199 hours
-
Supplier: Fargo Controls, Inc.
Description: . FEATURES: Self-powered Totalizing Counter & Timer Up/Down count input 8 digit LCD display, Backlight with external 5VDC High speed solid state, slow speed contact closure and high voltage inputs 10k Hz max. Count speed NEMA 4X / IP 65 display RoHS & CE Compliant
- Digit Height: 0.3540 inches
- Display Type: LCD
- Field Selectable Time Ranges: Yes
- Functions: Elapsed Time Meter / Indicator
-
Supplier: Marsh Bellofram Group of Companies
Description: Functions As Timer or Counter Five Time Ranges Six Single-Cycle and Eight Repeat-Cycle Timing Modes Sealed Faceplate Cycle Counter Count Input Scaling Data Retention Memory with EEPROM Circuitry. (653-8-2000, 653-8-2001 Models) Data Retention Memory with Lithium Battery (653-8-3000,
- Data Logger or Recorder: Yes
- Functions: Delay Cycle, Delay On Timer, Delay Off Timer, One Shot Timer, Interval Delay Timer, Preset
- Maximum Time Setting: 199 hours
- Minimum Time Setting: 1.00E-3 seconds
-
Supplier: OMRON Automation and Safety
Description: The H8GN is a 1/32 DIN timer and counter in one. It is simple to switch between the timer and counter functions. During operation it is also possible to switch the display to monitor the totalising count value in 8 digits. Many sophisticated functions come standard with H8GN. H
-
Supplier: Maxim Integrated
Description: counting again. If the watchdog timer exceeds the watchdog timeout period (1.6s typ), the active-low, push-pull watchdog output asserts for the watchdog pulse period (140ms min) to alert the system of the fault. The MAX6814 consumes only 4µA of supply current and is fully specified
- Features: Watchdog Timer (WDT)
- Operating Temperature: -40 to 85 C
- Package Type: SC-70
- Pin Count: 5
-
Supplier: Measurement Computing
Description: High-speed counter/timer device with 8 counter I/O, 4 PWM timer outputs, and 8 digital I/O. KEY HIGHLIGHTS The USB-CTR Series of USB counter devices provide high-speed counter/timer operations synchronized with digital I/O functions. Each device features high frequency and scan
- Application Software Included: Yes
- Bus Type: USB
- Connector Type: Other
- Counter Resolution: 64 bits
-
Supplier: Measurement Computing
Description: High-speed counter/timer device with 4 counter I/O, 4 PWM timer outputs, and 8 digital I/O. KEY HIGHLIGHTS The USB-CTR Series of USB counter devices provide high-speed counter/timer operations synchronized with digital I/O functions. Each device features high frequency and scan
- Application Software Included: Yes
- Bus Type: USB
- Connector Type: Other
- Counter Resolution: 64 bits
-
Supplier: Allied Electronics, Inc.
Description: Large Display Timers and Counter/Rate Meters offer versatile functionality in easy-to-read 2.25" and 4" red LED digits. Now you can monitor factory processes up to 180 feet away. There are basic counting or timing models available, or fully programmable models with set point
- Digit Height: 0.1575 inches
- Display Type: LED
- Functions: Elapsed Time Meter / Indicator
- Maximum Time Setting: 999999 hours
-
Supplier: Fargo Controls, Inc.
Description: This Fargo Controls Inc. is proud to announce its latest addition, the TC series. This series is a powerful 6-digit multifunction programmable preset Timer/Counter/Tachom eter with a communication interface. It has RS-232, RS-485, RS-422 Serial Communications and supports Modbus protocol
- Audible or Visual Alarms: Yes
- Digit Height: 0.3543 inches
- Direction: Bi-directional Counter
- Display Type: LCD
-
Supplier: Allied Electronics, Inc.
Description: Temperature 14-140°F (–10-60°C) Counting Direction: Adding Reset: Manual and Electrical Panel Cutout: 22 × 44 mm (0.870 × 1.772 In.)
- Display Type: LCD
- Functions: Elapsed Time Meter / Indicator
- Number of Digits (or Characters): 6
-
Supplier: Allied Electronics, Inc.
Description: Temperature 14-140°F (–10-60°C) Counting Direction: Adding Reset: Manual and Electrical Panel Cutout: 22 × 44 mm (0.870 × 1.772 In.)
- Digit Height: 0.3100 inches
- Display Type: LCD
- Functions: Elapsed Time Meter / Indicator
- Number of Digits (or Characters): 8
-
Supplier: Allied Electronics, Inc.
Description: Temperature 14-140°F (–10-60°C) Counting Direction: Adding Reset: Manual and Electrical Panel Cutout: 22 × 44 mm (0.870 × 1.772 In.)
- Digit Height: 0.3100 inches
- Display Type: LCD
- Functions: Elapsed Time Meter / Indicator
- Number of Digits (or Characters): 8
-
Supplier: Hoyt Electrical Instrument Works, Inc.
Description: SHAFT ROTATION monitors, frequently called ZERO SPEED or TACHOMETER relays operate when the pulses (usually generated by a proximity switch) received fall below a user selected set point. This situation is sometimes caused by something jamming the machine. The motor(s) draws excessive current thus
- Digit Height: 0.3543 inches
- Direction: Bi-directional Counter
- Display Type: LED
- Functions: Batch Counter, Count Totalizer, Counter / Timer Combination
-
Supplier: Trumeter Company, Inc.
Description: This versatile count up or count down predetermining counter/timer with prescaler has a wide range of innovative and attractive features. Designed with imagination and built to the highest standards it offers both counting and timing functions in one unit. Features Simple
- Digit Height: 0.2756 inches
- Display Type: LCD
- Number of Digits (or Characters): 6
- Number of Functions: Multi-function
-
Supplier: Measurement Computing
Description: High-speed counter/timer board with 8 counter I/O, 4 PWM timer outputs, and 8 digital I/O. KEY HIGHLIGHTS The USB-CTR Series of USB counter devices provide high-speed counter/timer operations synchronized with digital I/O functions. Each device features high frequency and scan
- Application Software Included: Yes
- Bus Type: USB
- Connector Type: Other
- Counter Resolution: 64 bits
-
Supplier: Measurement Computing
Description: High-speed counter/timer board with 4 counter I/O, 4 PWM timer outputs, and 8 digital I/O KEY HIGHLIGHTS The USB-CTR Series of USB counter devices provide high-speed counter/timer operations synchronized with digital I/O functions. Each device features high frequency and scan
- Application Software Included: Yes
- Bus Type: USB
- Connector Type: Other
- Counter Resolution: 64 bits
-
Supplier: Trumeter Company, Inc.
Description: . Models are available with front panel field programmable alerts. Not only does the display flash to get attention, but it displays a choice of 7 different .08”[2mm] maintenance icons. Models are available as a Preset Counter/Timer with a MOSFET output for the actuation of external alarms or
- Display Type: LED
- Number of Functions: Multi-function
- Programming Options: Keypad
- Signal Input Type: Voltage
-
Supplier: Embedded Data Systems
Description: 32-bit counter/32-bit timer. Counts and times switch closure inputs. TMEX file-record formatted data. Unique Network addresses. Triple buffered time/count in 32-bit format. Self-exciting switch closure input
- Counter Resolution: 32 bits
- Maximum Count Frequency: 0.0500 kHz
- Operating Temperature: -40 to 185 F
-
Supplier: Acromag, Inc.
Description: Ten 16-bit-TTL (482) Five 16-bit-TTL and two 16-bit-RS422 (483) Five 16-bit-RS422 counter/timer channels (484) 8 or 32MHz clock time base Several models with a variety of configurations provide up to ten counter/timer channels for counting events
- Bus Type: Other
- Counter Resolution: 16 bits
- Maximum Count Frequency: 32000 kHz
- Number of Counters: 10
-
Supplier: Microstar Laboratories, Inc.
Description: The MSXB 036 Counter/Timer Board is used for frequency counting, rotational speed (tachometer) measurement, and closed loop process control based on frequency criteria. Engine performance monitoring is a typical application. The Counter/Timer Board provides 16 digital input
Find Suppliers by Category Top
Featured Products Top
-
device is interrupted, the DS3234 seamlessly switches to the backup supply input, maintaining accurate timekeeping without missing a beat. With the integration of a crystal resonator, this RTC enhances long-term accuracy and simplifies manufacturing by reducing piece-part count (read more)
Browse IC Timers Datasheets for Shenzhen Shengyu Electronics Technology Limited -
-bit up/down counter with a count N ranging between 0 and 63 to correspond to 64 wiper-tap positions of a resistor chain consisting of 64 equal resistors. The LS7190 and LS7193 interfaces with quadrature clocks from incremental encoders. The LS (read more)
Browse Resistors Datasheets for Omni Pro Electronics, Inc.
Conduct Research Top
-
How to Make Your Measurement System More Flexible With Counter/Timers
Counter/timers (or counters) are an extremely useful feature of many National Instruments multifunction DAQ devices and NI CompactDAQ chassis. You can use counters for many different applications, such as event counting and reading or writing digital pulse trains. You can easily develop counter
-
Clock Design Using Low Power/Cost Techniques
Typical embedded control applications place demands such as low power consumption, small size, low cost and reduced component count onto the microcontroller. This application note implements a 24-hour digital clock, alarm and 99 minute 59 second count down timer, yet operates on two ?AA? batteries
-
Frequency Counter Using PIC16C5x
The PIC16C5X has one 8-bit timer (Timer0), which can be used with an 8-bit prescaler. The prescaler runs asynchronously, hence it can count a very high frequency. The minimum rise and fall times of the input frequency are specified to be 10 ns, so the fastest clock rate the TMR0 can count is 50 MHz
-
Software Handling for Capacitive Sensing
and Analog/Digital Selection limited configurability. Microchip's capacitive sensing * Oscillator Signal Paths Enabled solution offers the utmost in flexibility because the soft- * Enable Timers and Set Timer0 Prescalar ware routines to detect a button press can be completely * Enable Interrupts
More Information Top
-
http://focus.ti.com/lit/ds/symlink/lm3s9d92.pdf
When enabled, the timer counts down on each clock from the reload value to zero, reloads (wraps) to the value in the STRELOAD register on the next clock edge, then decrements on subsequent clocks.
-
http://focus.ti.com/lit/ds/symlink/lm3s9b92.pdf
When enabled, the timer counts down on each clock from the reload value to zero, reloads (wraps) to the value in the STRELOAD register on the next clock edge, then decrements on subsequent clocks.
-
Using the MCS-51 Microcontroller
Suppose the time delay to be created is X seconds, then the number of timer counts equivalent to the time delay can be computed by the following expression: .
-
http://focus.ti.com/lit/ds/symlink/lm3s811.pdf
When enabled, the timer counts down on each clock from the reload value to zero, reloads (wraps) to the value in the STRELOAD register on the next clock edge, then decrements on subsequent clocks.
-
http://www.intel.com/assets/pdf/datasheet/290562.pdf
TMRCNT— Timer Count Registers (IO) ...................................................................................
-
http://www.nxp.com/documents/user_manual/UM10398.pdf
At the end of the timer cycle where the match occurs, the timer count is reset.
-
http://www.nxp.com/documents/user_manual/JN-UG-3087.pdf
In this mode, the timer counts edges on an external clock signal, which must be provided on a DIO pin - see Section 7.2.1 for the relevant DIOs.
-
http://www.nxp.com/documents/user_manual/UM10736.pdf
When the high resolution timer count reaches 0, the following happens: – The PMU will turn on the on-chip voltage regulator.
-
http://www.nxp.com/documents/user_manual/UM10732.pdf
When the high-resolution timer count reaches 0, the following happens: .
-
http://www.nxp.com/documents/user_manual/UM10470.pdf
Once a clock is detected, the Wake-up Timer counts a fixed number of clocks (4,096), then sets the flag (OSCSTAT bit in the SCS register) that indicates that the main oscillator is ready for use.