PIN Fiber Optic Receivers
from Newport MKS
The 2107-FS-M Adjustable Gain and Bandwidth Balanced Optical Receiver is a free space, 300 to 1070 nm photoreceiver with higher-gain and lower-bandwidth than our popular Model 20X1 laboratory photoreceivers. Ideal for FM spectroscopy, absorption spectroscopy, or ellipsometry, this Silicon adjustable... [See More]
- Receiver Type: PIN Photodiode
- Bandwidth: 0.1500 to 10
- Rise Time: 80
from Newport MKS
The 2051-FS Adjustable Silicon Optical Receiver is based on our popular Model 2001 photoreceivers. This higher speed free space optical input model features low-noise 300 to 1050 nm Silicon detectors, variable-gain transimpedance amplifiers, and two adjustable filters. The DC ÷30 setting... [See More]
- Receiver Type: PIN Photodiode
- Bandwidth: 0.1500 to 10
- Rise Time: 80
- Operating Temperature: 50 to 95
from Newport MKS
The 2007 Nirvana Auto-Balanced Optical Receiver can cut the effects of laser noise by 50 dB, making even very small signals easy to see. The 2007 has a 400 to 1070 nm wavelength range. In spectroscopy, ellipsometry, or heterodyne-detection experiments, these receivers can yield shot-noise-limited... [See More]
- Receiver Type: PIN Photodiode
- Bandwidth: 0.0 to 0.1250
- Rise Time: 3000
from Newport MKS
The 1807-FC Silicon Balanced Fiber-Optic Receiver is ideal for coherent heterodyne-detection applications including Doppler LIDAR, and optical coherence tomography. This FC connectorized, 320 to 1000 nm, DC to 80-MHz balanced receiver can make the difference when you need to see a small signal. Just... [See More]
- Receiver Type: PIN Photodiode
- Bandwidth: 0.0 to 80
- Rise Time: 3
from Newport MKS
The 818-BB-31 High Speed Photodetector consists of a free-space 1000 to 1600 nm biased InGaAs detector with a 0.10 mm active diameter and a <175 ps rise time. The detector utilizes an FC input connector for use with fiber optic signals. It includes a built-in bias supply consisting of two... [See More]
- Receiver Type: PIN Photodiode
- Bandwidth: 0.0 to 2000
- Rise Time: 0.1750
from Newport MKS
The F-PD-22-H-DIL Fiber-Optic Linear Balanced Photoreceiver with a configurable bandwidth up to 22 GHz is hermetically sealed for component qualification standards. In a 14-pin mini-DIL package, F-PD-22-DIL intigrates a dual balanced PIN photodiode (PD) array on a single chip and a linear... [See More]
- Receiver Type: PIN Photodiode
- Bandwidth: 20000
from Newport MKS
The 818-BB-35F High Speed Biased Fiber-Optic Detector features a 1 meter long FC connectorized singlemode fiber coupled to a 1000 to 1650 nm InGaAs detector with a 0.032 mm active diameter and a <25 ps rise time. It includes a built-in bias supply consisting of two standard 3 V lithium cells (6V... [See More]
- Receiver Type: PIN Photodiode
- Bandwidth: 0.0 to 15000
- Rise Time: 0.0250
from Newport MKS
The 818-BB-45F High Speed Battery Biased Fiber-Optic Detector features a 1 meter long FC connectorized singlemode fiber coupled to a 500 to 890 nm GaAs high speed photodetector with a <30 ps rise time. It includes a built-in bias supply consisting of one standard 3 V lithium cell (3V total bias)... [See More]
- Receiver Type: PIN Photodiode
- Bandwidth: 0.0 to 12500
- Rise Time: 0.0300
from Newport MKS
The 818-BB-51F High Speed Battery Biased Fiber-Optic Detector features an extended InGaAs photodiode with a 40 um active diameter and a <28 ps rise time coupled to a Corning singlemode SMF-28e fiber with an FC/UPC connector. With the wavelength range of 830-2150 nm, it allows monitoring Thulium... [See More]
- Receiver Type: PIN Photodiode
- Bandwidth: 0.0 to 10000
- Rise Time: 0.0280
from Newport MKS
The 1444 NIR Fiber-Optic Detector is for those applications requiring fast time resolution with a guaranteed 18.5 ps rise time. This InGaAs photodetector provides clean, fast impulse responses with minimal ringing over a 500 to 1630 nm wavelength range, making it ideal for time-domain applications... [See More]
- Receiver Type: PIN Photodiode
- Operating Temperature: 50 to 95
- Bandwidth: 0.0 to 20000
from Newport MKS
The F-PD-30-1064 is a highly linear, 30 GHz bandwidth InGaAs PIN photodetector that is optimized for 1064 nm operational wavelength; it is ideal for the use in O/E front-ends requiring wide band frequency response. The coplanar waveguide photodiode design optimizes speed and sensitivity for the 1030... [See More]
- Receiver Type: PIN Photodiode
- Operating Temperature: 14 to 140
- Bandwidth: 28000 to 30000
from Newport MKS
The 2001-FC-M Silicon Fiber-Optic Receiver features low-noise detectors, variable-gain trans impedance amplifiers, and two adjustable filters. It offers a wavelength range of 300 to 1050 nm and FC/PC connector optical input. The DC ÷30 setting prevents your signal from going off-scale due to DC... [See More]
- Receiver Type: PIN Photodiode
- Bandwidth: 0.0 to 0.2000
- Rise Time: 2000
from Newport MKS
The 1801-FC Silicon Fiber-Optic Receiver is a FC connectorized, 320 to 1000 nm photoreceiver offering a well-balanced combination of gain, bandwidth, and low noise over the DC to 125 MHz frequency range. Because of its high transimpedance gain and low noise-equivalent power (NEP), it offers the best... [See More]
- Receiver Type: PIN Photodiode
- Bandwidth: 0.0 to 125
- Rise Time: 3
from Newport MKS
The 1601FC-AC Silicon Fiber-Optic Receiver is used for experiments requiring up to 1 GHz bandwidths and 400 ps rise times. This FC/PC connectorized photoreceiver offers a well-balanced combination of gain, bandwidth, and very low noise. The Silicon detector wavelength range is 320 to 1000 nm. For... [See More]
- Receiver Type: PIN Photodiode
- Bandwidth: 0.0300 to 1000
- Rise Time: 0.4000
from Newport MKS
The 1811-FC InGaAs Fiber-Optic Receiver is a FC connectorized, 900 to 1700 nm photoreceiver offering a well-balanced combination of gain, bandwidth, and low noise over the DC to 125 MHz frequency range. Because of its high transimpedance gain and low noise-equivalent power (NEP), it offers the best... [See More]
- Receiver Type: PIN Photodiode
- Bandwidth: 0.0 to 125
- Rise Time: 3
from Newport MKS
The 1611FC-AC InGaAs Fiber-Optic Receiver is used for experiments requiring up to 850 MHz bandwidths and 400 ps rise times. This FC/PC connectorized photoreceiver offers a well-balanced combination of gain, bandwidth, and very low noise. The InGaAs detector wavelength range is 900 to 1700 nm. For... [See More]
- Receiver Type: PIN Photodiode
- Bandwidth: 0.0300 to 850
- Rise Time: 0.4000
from Newport MKS
The F-PD-30-A-H-FCA Linear Fiber-Optic Photoreceiver is designed for analog applications. This compact photo receiver contains a surface coupled coplanar waveguide PIN photodiode and a linear transimpedance amplifier within a hermetically sealed 14-pin butterfly package. With an integrated variable... [See More]
- Receiver Type: PIN Photodiode
- Bandwidth: 35000
from Newport MKS
The 1544-B DC-Coupled NIR Fiber-Optic Receiver is ideal for applications that require high sensitivity, high speed, and clean responses. It offers clean responses and 32-ps rise times making it well-suited for time-domain characterization of 10-Gbit/s components. Its high gain and well-behaved... [See More]
- Receiver Type: PIN Photodiode
- Bandwidth: 0.0 to 12000
- Rise Time: 0.0320
from Newport MKS
The 1544-A Near-IR Fiber-Optic Receiver is ideal for applications that require high sensitivity, high speed, and clean responses. It offers clean responses and 32-ps rise times making it well-suited for time-domain characterization of 10-Gbit/s components. Its high gain and well-behaved frequency... [See More]
- Receiver Type: PIN Photodiode
- Bandwidth: 0.0100 to 12000
- Rise Time: 0.0320
from Newport MKS
The 1801-FS Silicon Optical Receiver is a free space, 320 to 1000 nm photoreceiver offering a well-balanced combination of gain, bandwidth, and low noise over the DC to 125 MHz frequency range. Because of its high transimpedance gain and low noise-equivalent power (NEP), it offers the best in... [See More]
- Receiver Type: PIN Photodiode
- Bandwidth: 0.0 to 125
- Rise Time: 3
- Operating Temperature: 50 to 95
from Newport MKS
The 1601FS-AC Silicon Optical Receiver is used for experiments requiring up to 1 GHz bandwidths and 400 ps rise times. This free space photoreceiver offers a well-balanced combination of gain, bandwidth and very low noise. The wavelength range is 320 to 1000 nm. For mounting it has an 8-32 mounting... [See More]
- Receiver Type: PIN Photodiode
- Bandwidth: 0.0300 to 1000
- Rise Time: 0.4000
- Operating Temperature: 50 to 95
from Newport MKS
The 818-BB-35 High Speed InGaAs Detector consists of a free-space 830 to 1650 nm Battery Biased InGaAs photodetector with a 0.032 mm active diameter and a <25 ps rise time. It includes a built-in bias supply consisting of two standard 3 V lithium cells (6V total bias) and a 50 ohm BNC connector... [See More]
- Receiver Type: PIN Photodiode
- Bandwidth: 0.0 to 15000
- Rise Time: 0.0250
from Newport MKS
The 818-BB-27 High Speed UV Enhanced Silicon Optical Detector consists of a silicon detector with an enhanced ultraviolet response, making it well suited for the fourth harmonic Nd:YAG, YLF or Glass Lasers and Excimer Lasers. Additionally, its large 2.55 mm active diameter and 3 ns rise time make it... [See More]
- Receiver Type: PIN Photodiode
- Bandwidth: 0.0 to 118
- Rise Time: 3
from Newport MKS
The 818-BB-21 High Speed Silicon Optical Detector consists of a free-space 320 to 1000 nm Battery Biased Silicon detector with a 0.40 mm active diameter and a <300 ps rise time. It includes a built-in bias supply consisting of three standard 3 V lithium cells (9 V total bias) and a 50 ohm BNC... [See More]
- Receiver Type: PIN Photodiode
- Bandwidth: 0.0 to 1200
- Rise Time: 0.3000
from Microwave Photonic Systems, Inc.
The MP-5000RX is a RF/Fiber Optic Receiver designed for antenna remoting and ultra-broadband RF transmission applications using singlemode fiber optic cable. The receiver utilizes a high-speed, low distortion PIN photodiode detector that provides Optical to RF conversion out to 12 GHz. The unit... [See More]
- Receiver Type: PIN Photodiode
- Connector Type: FC (optional feature); SC (optional feature)
- Cable Type: Single mode
- Responsivity: 0.7500
from Broadcom Inc.
The Versatile Link series is a complete family of fiber optic link components for applications requiring a low cost solution. The HFBR-0500Z series includes transmitters, receivers, connectors and cable specified for easy design. This series of components is ideal for solving problems with voltage... [See More]
- Receiver Type: PIN Photodiode
- Amplifier Type: Transimpedance
- Photodiode Semiconductor: Silicon
- Cable Type: Multimode
from OSI Optoelectronics
The Airpak Series Receivers are full function, high performance digital fiber optic modules. They provide an extremely cost effective interface between standard ECL and PECL logic families and an optical fiber transmission system. The innovative application of high-quality surface mount technology... [See More]
- Receiver Type: PIN Photodiode
- Connector Type: FC (optional feature)
- Photodiode Semiconductor: Indium Gallium Arsenic
- Data Rate: 52 to 622
from Semtech Corp.
Semtech's complete line of PIN and APD Receive Optical Sub-Assemblies (ROSAs) products spans 850 nanometer (nm) to 1550 nm including limiting, linear and automatic gain control (AGC) functionality. Gennum PIN ROSAs operate at +3.3V ±10% and from -40 °C to +85 °C, with highly accurate... [See More]
- Receiver Type: PIN Photodiode
- Data Rate: 11300
- Photodiode Semiconductor: Indium Gallium Arsenic
- Sensitivity: -27 to -15
from Microwave Photonic Systems, Inc.
The MP-6000RX is a RF/Fiber Optic Receiver designed for antenna remoting and ultra-broadband RF transmission applications using singlemode fiber optic cable.The receiver utilizes a high-speed, low distortion PIN photodiode detector that provides Optical to RF conversion out to 18 GHz. The unit... [See More]
- Receiver Type: PIN Photodiode
- Connector Type: FC (optional feature); SC (optional feature)
- Cable Type: Single mode
- Responsivity: 0.7500
from Broadcom Inc.
The HFBR-0508Z Series consists of a fiber-optic transmitter and receiver operating at a 650 nm wavelength (red). The HFBR-1528Z transmitter is an LED in a low cost plastic housing designed to efficiently couple power into 200 μm diameter HCS and 1 mm diameter POF. The HFBR-2528Z receiver... [See More]
- Receiver Type: PIN Photodiode
- Amplifier Type: Transimpedance
- Photodiode Semiconductor: Silicon
- Cable Type: Multimode
from OSI Optoelectronics
OSI Laser Diode, Inc. (LDI) PINAMPs provide a low cost, high performance miniature optical receiver module which integrates a high speed, high responsivity, low leakage current InGaAs photodiode with a GaAs transimpedance amplifier. The transimpedance amplifier incorporates automatic gain control... [See More]
- Receiver Type: PIN Photodiode
- Cable Type: Multimode
- Photodiode Semiconductor: Indium Gallium Arsenic
- Data Rate: 4 to 622
from Microwave Photonic Systems, Inc.
The MP-2320RX is a comprehensive family of RF/Fiber Optic Receivers that are designed to provide optical-to-electrical (O/E) conversion of broadband RF signals over a frequency range of 1.0 MHz to 3.0 GHz. The receiver family is comprised of four model variants that operate over a unique frequency... [See More]
- Receiver Type: PIN Photodiode
- Bandwidth: 3000
- Connector Type: FC (optional feature); SC (optional feature)
- Signal Output:: Radio Frequency
from Broadcom Inc.
All HFBR-X5X5XZ series transmitters and receivers are housed in a low-cost, dual-in-line package that is made of high strength, heat resistant, chemically resistant and UL 94 V-O (UL file # E121562) flame retardant plastic. The transmitters are easily identified by the light grey colored connector... [See More]
- Receiver Type: PIN Photodiode
- Cable Type: Multimode
- Photodiode Semiconductor: Silicon
- Connector Type: ST
from OSI Optoelectronics
OSI Laser Diode, Inc. ‘s (LDI) PINFET provides an excellent solution for optical receiver systems that require both high sensitivity and wide dynamic range. Applications include telecommunication line-terminating equipment or repeaters and optical sensor systems. The receiver package offers... [See More]
- Receiver Type: PIN Photodiode
- Amplifier Type: Transimpedance
- Photodiode Semiconductor: Indium Gallium Arsenic
- Cable Type: Single Mode / Multimode
from Microwave Photonic Systems, Inc.
The MP-2350RX is a comprehensive family of RF/Fiber Optic Receivers that are designed to provide optical-to-electrical (O/E) conversion of broadband RF signals over a frequency range of 1.0 MHz to 3.5 GHz. The receiver family is comprised of four model variants that operate over a unique frequency... [See More]
- Receiver Type: PIN Photodiode
- Connector Type: FC; SC
- Cable Type: Single mode
- Responsivity: 0.8500 to 0.9000
from Broadcom Inc.
All HFBR-X5X5XZ series transmitters and receivers are housed in a low-cost, dual-in-line package that is made of high strength, heat resistant, chemically resistant and UL 94 V-O (UL file # E121562) flame retardant plastic. The transmitters are easily identified by the light grey colored connector... [See More]
- Receiver Type: PIN Photodiode
- Data Rate: 80
- Cable Type: Single mode
- Signal Output:: Transistor-Transistor Logic
from Broadcom Inc.
HFBR-2505AFZ is metal housing optical receiver suitable for optical communication in industrial and harsh environment. It meets SERCOS application that allows data transmission from DC to 10MBd. The metal housing provides robust design that prevents optical port breakage in the harsh environment... [See More]
- Receiver Type: PIN Photodiode
- Connector Type: SMA
- Cable Type: Single mode
- Data Rate: 80
from Broadcom Inc.
HFBR-2515BFZ is metal housing optical receiver suitable for opticalcommunication in industrial and harsh environment. It meets PROFIBUSapplication that allows data transmission from DC to 10MBd. The metalhousing provides robust design that prevents optical port breakage inthe harsh environment with... [See More]
- Receiver Type: PIN Photodiode
- Cable Type: Multimode
- Photodiode Semiconductor: Silicon
- Connector Type: ST
from Broadcom Inc.
Avago ’s 125 MBd Robust Versatile Link Receiver series offers a cost-effective fiber optic solution for transmission of 125 MBd data over 100 m. Our 125 MBd Robust Versatile Link Receiver consists of an LED transmitter, HFBR-2527ETZ, and a PIN/preamp receiver, HFBR-2526ETZ. These can be used... [See More]
- Receiver Type: PIN Photodiode
- Amplifier Type: Transimpedance
- Photodiode Semiconductor: Silicon
- Data Rate: 125
from Broadcom Inc.
The 125 MBd Versatile Link (HFBR-0507Z Series) is the mostcost-effective fiber-optic solution for transmission of 125 MBd dataover 100 meters. The data link consists of a 650 nm LED transmitter,HFBR-15X7Z, and a PIN/preamp receiver, HFBR-25X6Z. These can be usedwith low-cost plastic or silica fiber. [See More]
- Receiver Type: PIN Photodiode
- Cable Type: Multimode
- Photodiode Semiconductor: Silicon
- Data Rate: 1000
from Broadcom Inc.
The HFBR-0300Z Series is designed to provide the most cost-effective 1300 nm fiber optic links for a wide variety of data communication applications from low-speed distance extenders up to SONET OC-3 signal rates. Pinouts identical to Avago HFBR-0400Z Series allow designers to easily upgrade their... [See More]
- Receiver Type: PIN Photodiode
- Amplifier Type: Transimpedance
- Photodiode Semiconductor: InGaAsP
- Cable Type: Single Mode / Multimode
from Broadcom Inc.
The RoHS-compliant transmitters and receivers are housed in a low-cost, dual-in-line package that is made of high strength, heat resistant, chemically resistant and UL 94V-O (UL file # E121562) flame retardant plastic. Both the transmitter and receiver are coated. with a layer of conductive alloy... [See More]
- Receiver Type: PIN Photodiode
- Cable Type: Multimode
- Photodiode Semiconductor: Silicon
- Connector Type: SMA
from Broadcom Inc.
HFBR-2506AFZ is metal housing optical receiver for SERCOSapplication that allows data rates of 2,4,8 and 16 MBd. The metalhousing provides robust design that prevent optical port breakage inthe harsh environment with excellence ESD performance. The optical datais transferred between numerical... [See More]
- Receiver Type: PIN Photodiode
- Cable Type: Multimode
- Photodiode Semiconductor: Silicon
- Connector Type: SMA
from Broadcom Inc.
All HFBR-X5X5XZ series transmitters and receivers are housed in a low-cost, dual-in-line package that is made of high strength, heat resistant, chemically resistant and UL 94 V-O (UL file # E121562) flame retardant plastic. The transmitters are easily identified by the light grey colored connector... [See More]
- Receiver Type: PIN Photodiode
- Cable Type: Multimode
- Photodiode Semiconductor: Silicon
- Connector Type: SMA
from Broadcom Inc.
HFBR-2505CFZ is metal housing optical receiver suitable for opticalcommunication in industrial and harsh environment. It meets INTERBUS-Sapplication that allows data transmission from DC to 2MBd. The metalhousing provides robust design that prevents optical port breakage inthe harsh environment with... [See More]
- Receiver Type: PIN Photodiode
- Cable Type: Multimode
- Photodiode Semiconductor: Silicon
- Connector Type: SMA
from Broadcom Inc.
MOST (Media Oriented Systems Transport) transmitters and receivers in clear mold package are high-end POF (Plastic Optical Fiber) components for in-car entertainment and information systems. The MOST multimedia fiber optic link is optimized for automotive applications and is EMI-proof. The... [See More]
- Receiver Type: PIN Photodiode
- Data Rate: 25
- Cable Type: Multimode
- Signal Output:: Transistor-Transistor Logic
from Broadcom Inc.
Avago ’s RPIC-10410 ROSA is a 4x10Gb/s, 1310nm CWDM receive optical subassembly, containing an optical de-multiplexer, to separate the four incoming CWDM wavelengths, four high reliability, high performance PIN photodiodes, and a quad transimpedance amplifier (TIA). The ROSA includes four... [See More]
- Receiver Type: PIN Photodiode
- Data Rate: 10312
- Connector Type: LC
from Broadcom Inc.
The Versatile Link series is a complete family of fiber optic link components for applications requiring a low cost solution. The HFBR-0500Z series includes transmitters, receivers, connectors and cable specified for easy design. This series of components is ideal for solving problems with voltage... [See More]
- Receiver Type: PIN Photodiode
- Amplifier Type: Transimpedance
- Photodiode Semiconductor: Silicon
- Cable Type: Multimode
from Broadcom Inc.
The AFBR-2419MZ fiber optic receiver is designed to operate with the Avago Technologies HFBR-14xxZ/-1712TZ fiber optic transmitters and multimode glass fiber cable. Consistent coupling into the receiver is assured by the optical system with lens. The receiver output is a digital CMOS/TTL signal. The... [See More]
- Receiver Type: PIN Photodiode
- Connector Type: ST
- Cable Type: Multimode
- Signal Output:: Transistor-Transistor Logic; Complementary Metal Oxide Semiconductor
from Broadcom Inc.
The AFBR-2419Z fiber optic receiver is designed to operate with the Avago Technologies HFBR-14xxZ/-1712TZ fiber optic transmitters and multimode glass fiber cable. Consistent coupling into the receiver is assured by the optical system with lens. The receiver output is a digital CMOS/TTL signal. The... [See More]
- Receiver Type: PIN Photodiode
- Connector Type: ST
- Cable Type: Multimode
- Signal Output:: Transistor-Transistor Logic; Complementary Metal Oxide Semiconductor
from Broadcom Inc.
The AFBR-2310Z is a compact, high performance, cost effective receiver for multi GHz analog communication over single mode optical fiber. The receiver incorporates a wide bandwidth, low dark current InGaAs/InP PIN photodiode packaged inside a TO-header, together with a high performance E-pHEMT RF... [See More]
- Receiver Type: PIN Photodiode
- Cable Type: Single mode
- Photodiode Semiconductor: Indium Gallium Arsenic
- Connector Type: FC
from Broadcom Inc.
The AFBR-776BxxxZ Twelve-Channel, Pluggable, Parallel-Fiber-Optics Transmitter and AFBR-786BxxxZ Twelve-Channel, Pluggable, Parallel-Fiber-Optics Receiver are high performance fiber optics modules for short-range parallel multi-lane data communication and interconnect applications. The modules... [See More]
- Receiver Type: PIN Photodiode
- Data Rate: 6250
- Cable Type: Multimode
- Rise Time: 0.0800
from Broadcom Inc.
The AFBR-2644Z receiver consists of an IC with an integrated photodiode to produce a logic compatible output. The 30 ° Tilted Package provides assistance with cable routing by reducing cable/connector strain relief for systems that require cables to be bent upwards/downwards to route between... [See More]
- Receiver Type: PIN Photodiode
- Dynamic Range: 630 to 685
- Rise Time: 5
- Signal Output:: Transistor-Transistor Logic
from Broadcom Inc.
The Avago ALM-2203 is a miniature highly-integrated LNA-filter RFIC module. The module is designed to enable Satellite Digital Audio Radio Service (SDARS) signal to coexist with cellular, WiFi, Bluetooth and GPS signals commonly present in modern automobiles. The module integrates three low-noise... [See More]
- Receiver Type: PIN Photodiode
- Signal Output:: Transistor-Transistor Logic
- Rise Time: 10
- Packaging Type: Versatile Link Horizontal Package
from Broadcom Inc.
The Avago AFBR-2541CZ is a DC-5MBd Versatile Link POF receiver device in 30 °-tilted package, designed to operate with any type of signal from DC up to 5 MBd at link distances up to 50 meters using 1mm 0.5NA POF or 500 meters using 220 µm 0.37NA PCS. The receiver device consists of an IC... [See More]
- Receiver Type: PIN Photodiode
- Signal Output:: Transistor-Transistor Logic
- Rise Time: 10
- Packaging Type: Versatile Link Tilted (30°) Package
from Broadcom Inc.
The AFBR-2418Z fiber optic receiver is designed to operate with the Avago Technologies HFBR-14xxZ fiber optic transmitters and multimode glass fiber cable. The receiver output is a digital CMOS/TTL signal. The AFBR-2418Z receiver contains an IC with integrated photodiode to convert the incoming... [See More]
- Receiver Type: PIN Photodiode
- Connector Type: ST
- Cable Type: Multimode
- Rise Time: 5