Single Mode Fiber Optic Receivers
from Microwave Photonic Systems, Inc.
The MP-5000RX is a RF/Fiber Optic Receiver designed for antenna remoting and ultra-broadband RF transmission applications using singlemode fiber optic cable. The receiver utilizes a high-speed, low distortion PIN photodiode detector that provides Optical to RF conversion out to 12 GHz. The unit... [See More]
- Cable Type: Single mode
- Connector Type: FC (optional feature); SC (optional feature)
- Receiver Type: PIN Photodiode
- Responsivity: 0.7500
from L-com, Inc.
The L-com FOCV-12GSDI-SRXM is a 12G/6G SDI Converter receiver module. It has a small applicance-like design and can be used standalone with existing cabling. The L-com FOCV-12GSDI-SRXM 12G/6G SDI Converter receiver supports a 10km transmission distance over single mode fiber. The FOCV-12GSDI-SRXM... [See More]
- Cable Type: Single mode
from Ultra Energy
Digital Data Links. Point-to-Point Contact Closure. The FOT-CC and FOR-CC Fiber Optic Transmitter/Receiver can be used to transmit contact closure data over long distances. DIN Rail mount housings enable easy mounting on industry standard hardware. The FOT-CC Transmitter provides a closed contact... [See More]
- Cable Type: Single mode; Multimode
- Operating Temperature: -40 to 185
- Connector Type: ST
from Broadcom Inc.
The Avago TO293Bxxx is an hermetically sealed TO can device with integral photo diode for optical output monitoring using a 1310nm single mode edge-emitting laser diode chip family for use in uncooled applications up to 2.7Gb/sec. It supports CWDM wavelengths from 1270 to 1450nm. The laser is... [See More]
- Cable Type: Single mode
- Packaging Type: TO-56
- Data Rate: 2500 to 10000
- Operating Temperature: -40 to 185
from Microwave Photonic Systems, Inc.
The MP-6000RX is a RF/Fiber Optic Receiver designed for antenna remoting and ultra-broadband RF transmission applications using singlemode fiber optic cable.The receiver utilizes a high-speed, low distortion PIN photodiode detector that provides Optical to RF conversion out to 18 GHz. The unit... [See More]
- Cable Type: Single mode
- Connector Type: FC (optional feature); SC (optional feature)
- Receiver Type: PIN Photodiode
- Responsivity: 0.7500
from Broadcom Inc.
All HFBR-X5X5XZ series transmitters and receivers are housed in a low-cost, dual-in-line package that is made of high strength, heat resistant, chemically resistant and UL 94 V-O (UL file # E121562) flame retardant plastic. The transmitters are easily identified by the light grey colored connector... [See More]
- Cable Type: Single mode
- Data Rate: 80
- Receiver Type: PIN Photodiode
- Signal Output:: Transistor-Transistor Logic
from Microwave Photonic Systems, Inc.
The MP-2350RX is a comprehensive family of RF/Fiber Optic Receivers that are designed to provide optical-to-electrical (O/E) conversion of broadband RF signals over a frequency range of 1.0 MHz to 3.5 GHz. The receiver family is comprised of four model variants that operate over a unique frequency... [See More]
- Cable Type: Single mode
- Connector Type: FC; SC
- Receiver Type: PIN Photodiode
- Responsivity: 0.8500 to 0.9000
from Broadcom Inc.
Avago ’s BT-2442 is a 10G E-PON OLT Tridirectional OSA module with SC receptacle. This module contains a 1577nm EML laser, a 1490nm DFB LD, and a burst mode APD-TIA divided by WDM filters with single mode fiber. It is suitable for high performance 10G E-PON OLT applications. [See More]
- Cable Type: Single mode
- Connector Type: LC; SC
- Receiver Type: Avalanche Photodiode
- Data Rate: 10700
from Broadcom Inc.
HFBR-2505AFZ is metal housing optical receiver suitable for optical communication in industrial and harsh environment. It meets SERCOS application that allows data transmission from DC to 10MBd. The metal housing provides robust design that prevents optical port breakage in the harsh environment... [See More]
- Cable Type: Single mode
- Connector Type: SMA
- Receiver Type: PIN Photodiode
- Data Rate: 80