Threaded Fitting Thermistor Temperature Probes
from Fluid Components Intl. (FCI)
FCI provides temperature elements mounted in thermowells for direct installation into piping and ducting on commercial and military aircraft, spacecraft, vehicles and marine applications. These elements are available as Resistance Temperature Detector (RTD) that provides a linear change in... [See More]
- Process Connection: Threaded (NPT) Fitting; Other (Special)
- Probe Configuration: Penetration (Needle) Probe; Flexible Probe
- Sensed Temperature: -50 to 800
- Sensitive Length: 0.1600 to 4
from Fluid Components Intl. (FCI)
FCI provides temperature transmitters mounted in thermowells with integral or remote solid state electronics housed in protective hermetically or environmentally sealed enclosures for direct installation into piping and ducting on commercial and military aircraft, spacecraft, vehicles and marine... [See More]
- Process Connection: Threaded (NPT) Fitting; Other (Special)
- Probe Configuration: Straight Probe
- Sensed Temperature: -40 to 212
- Sensitive Length: 0.1600 to 4
from OMEGA Engineering, Inc.
This Thermistor Sensor Includes Two Thermistor Elements That When Used With a Resistor Set Will Provide Linearized Resistance Output Over a Specific Temperature Range [See More]
- Process Connection: Threaded (NPT) Fitting
- Diameter or Width Range: 0.1250
- Probe Configuration: Straight Probe
- Sensitive Length: 4.5
from PMC Engineering LLC
NPT2 1/8 ” NPT Air Temperature sensor is designed to withstand the most demanding of environments. They are available in either a brass or stainless steel body with an innovative heat insulating PEEK ISOTIP ™. The high temperature non-metallic tip helps prevent heat soak from the... [See More]
- Process Connection: Threaded (NPT) Fitting
- Probe Configuration: Air Probe
- Sensed Temperature: -20 to 300
- Diameter or Width Range: 0.2400
from Smith Systems, Inc.
Smith Systems, Inc. Thermo-Tran High Reliability Temperature sensor are available in a variety of configurations. Temperature Sensor Technologies Used: · Thermo-Fuse Probes. · Thermostat Probes. · Thermistor Sensor Probes. · Thermocouple Probes. · RTD Probes. Our... [See More]
- Process Connection: Threaded (NPT) Fitting
- Diameter or Width Range: 0.7500
- Probe Configuration: Straight Probe; Penetration (Needle) Probe (optional feature)
- Sensitive Length: 1.81 to 2.25
from OMEGA Engineering, Inc.
This sensor is designed for applications where the sensor needs to be immersed into a process and mounted using a 1/8NPT mounting thread. The sensor is protected by a 300 series stainless steel sheath, and has PFA or PVC insulated extension wires. [See More]
- Process Connection: Threaded (NPT) Fitting
- Probe Configuration: Straight Probe
- Sensed Temperature: ? to 212
- Diameter or Width Range: 0.1250 to 0.1562
from PMC Engineering LLC
NTC2 Series sensors are designed to measure the temperature of all types of air and gas in demanding motorsport and automotive applications. Air Temperature Sensor NTC2 PT1000 Series. PEEK ISOTIP. Range -20 °F to +300 °F. PT1000 or NTC Thermistor. IP67. Miniature Size [See More]
- Process Connection: Threaded (NPT) Fitting
- Probe Configuration: Air Probe
- Sensed Temperature: -20 to 300
- Diameter or Width Range: 0.1800 to 0.2400
from OMEGA Engineering, Inc.
These sensors are designed to be conveniently mounted directly into ports with 1/8NPT or 1/4NPT threads. The housings are machined from 300 Series Stainless Steel, contain a stainless steel strain relief spring, and stainless steel braided cables for use in rugged applications. [See More]
- Process Connection: Threaded (NPT) Fitting
- Probe Configuration: Straight Probe
- Sensed Temperature: ? to 302
- Diameter or Width Range: 0.2500
from PMC Engineering LLC
NPT1 Series of sensors are designed to measure the temperatures of all types of liquid in demanding motorsport and automotive applications. The sensing element can be either a PT1000 or an NTC Thermistor. Typical Applications Include: Coolant - Brakes - Water - Fuel - Oil. Liquid Temperature Sensor... [See More]
- Process Connection: Threaded (NPT) Fitting
- Probe Configuration: Straight Probe
- Sensed Temperature: -20 to 300
- Diameter or Width Range: 0.3100
from OMEGA Engineering, Inc.
Tubular Thermistor Sensor [See More]
- Process Connection: Threaded (NPT) Fitting
- Probe Configuration: Straight Probe
- Sensed Temperature: ? to 212
- Diameter or Width Range: 0.1250
from PMC Engineering LLC
NTC1 Series of fluid temperature sensors are designed to withstand the most demanding of environments. They are available in a wide selection of materials, sensing elements ( PT1000 or NTC) and a range of metric threads (See separately the NPT1 for a 1/8" NPT threaded version). Fluid Temperature... [See More]
- Process Connection: Threaded (NPT) Fitting
- Probe Configuration: Straight Probe
- Sensed Temperature: -20 to 300
- Diameter or Width Range: 0.1300 to 0.3100