Thermal Evaporators
from Samsco Corporation
Energy is the single largest component of operating costs in many wastewater treatment systems, and particularly is this so with distillation, where it generally accounts for 50-70% of total operating costs. The Samsco EnviroStill MVR Evaporator uses metal plate heat exchange technology, which... [See More]
- Type: Plate; Thermal; Vacuum; Mechanical Vapor Recompression
- Operating Temp: 48.89 to 79.44
- Application: Distillation; Waste Water Treatment
- Evaporation Rate: 50
from BUCHI Corporation
A multitude of possibilities in a minimum of space. Small drying oven with metal housing and robust platform, a transparent sample container, suited for removing residual solvent up to a maximum temperature of 300 °C. Visual monitoring of the sample chamber, graphic display with manual and... [See More]
- Type: Thermal
- Application: Research & Development
from Glas-Col, LLC
Low cost solution for the concentration of 96 well extractions and reactions. Each SS Needle delivers an equal flow of nitrogen or other gas. Gently speeds evaporation of excess liquid. Heats to 100 °C for even faster drying times. Digital temperature control. Fine needle valve controls the... [See More]
- Type: Thermal
- Equipment Size: 12.5" w x13" d x 9.75" h
- Application: Research & Development
- Power Source: Nitrogen Gas
from Bronkhorst USA
General. The CEM-System (Controlled Evaporation and Mixing) is an innovative Liquid Delivery System (LDS) that can be applied for atmospheric or vacuum processes. The vapour generation system consists of a liquid flow controller, an MFC for carrier gas and a temperature controlled mixing and... [See More]
- Type: Thermal
- System Capacity: 0.0 to 0.0200
- Application: CoatingEtching; Research & Development; Semiconductor Manufacturing; Anaesthetics
- Operating Temp: 20 to 200
from ENCON Evaporators
Evaporation Rate is based on tap water and auto-fill operation. [See More]
- Type: Thermal
- Evaporation Rate: 2
- Application: Distillation (optional feature); Waste Water Treatment
- Tank Capacity: 55
from Quorum Technologies
K975X. The K975X is a compact, bench-mounted, multiple application thermal evaporator for vacuum deposition of thin layers of carbon and metals. It is ideal for a wide range of techniques, including the production of carbon support films and replicas for TEM and carbon/metal thin film applications. [See More]
- Type: Thermal
- Application: Thin Film
from Samsco Corporation
The SWE-II uses a system design that provides consistent operation, minimal cleanout, high efficiency and ease of maintenance. [See More]
- Type: Thermal
- Evaporation Rate: 10
- Application: Distillation (optional feature); Waste Water Treatment
- Tank Capacity: 111
from BUCHI Corporation
The drying, distillation and sublimation of small quantities of substances. The ball tube oven is optimally suited for the fractioned distillation of small amounts of solvents up to 35ml and to a maximum temperature of 300 °C. Visual monitoring of the sample chamber, graphic display with manual... [See More]
- Type: Thermal
- Application: Research & Development
from Glas-Col, LLC
Specifics about all heated evaporators: All are very cost efficient nitrogen analytical evaporators. They also off a small footprint. Manifolds are interchangeable. Digital temperature control of insert heater also heats and controls the evaporating gas inlet. Manifolds deliver a controlled gas flow... [See More]
- Type: Thermal
- Power Source: Nitrogen Gas
- Application: Research & Development
- Operation: Laboratory
from Bronkhorst USA
Based on the CEM-technology, Bronkhorst designed a new series of Vapor Delivery Modules. These compact sub-systems incorporate the components of the CEM-System and more! Besides gas and liquid flow controllers and the temperature controlled evaporator, the VDM-Series feature integrated power supply... [See More]
- Type: Thermal
- System Capacity: 0.0 to 1.2
- Application: Chemical; CoatingEtching; Research & Development; Semiconductor Manufacturing; Solar Industries, Gas Chromatographs and Mass Spectrometers, Anesthetic Delivery, Humidification of Fuel Cells
- Operating Temp: 5 to 200
from ENCON Evaporators
When activated, the heating element contactors will close and provide power to the heating elements located inside the evaporator tank. The hot water vapor created inside the evaporator tank is drawn through the mist eliminator, up the stack, and is exhausted outside the building. [See More]
- Type: Thermal
- Operating Temp: ? to 232
- Application: Distillation (optional feature); Waste Water Treatment
- Evaporation Rate: 8
from Samsco Corporation
The Samsco WasteSaver ™ is a dual-effect, vacuum distillation evaporator that uses low-pressure steam to evaporate wastewater under vacuum at very low temperature. The steam is then condensed and returned for reuse as clean, distilled water. By evaporating under vacuum, the system can return... [See More]
- Type: Thermal
- Operating Temp: 32.22 to 43.33
- Application: Waste Water Treatment
- Evaporation Rate: 100
from Glas-Col, LLC
Only the insert is heated on these systems. This promotes heat exchange and speeds evaporation. [See More]
- Type: Thermal
- Power Source: Nitrogen Gas
- Application: Research & Development
- Operation: Laboratory
from ENCON Evaporators
When activated, the burner(s) will fire into the cylindrical combustion chamber of the heat exchanger. The hot gases travel past the vertical tubes inside the heat exchanger until they reach the insulated chimney outside the evaporator tank. [See More]
- Type: Thermal
- Operating Temp: ? to 232
- Application: Distillation (optional feature); Waste Water Treatment
- Evaporation Rate: 10