Conrad / Deep Groove Thin-section Bearings
from Pacific International Bearing, Inc.
Deep groove ball bearing. Thin [See More]
- Type: Conrad / Deep Groove
- Bore: 2.0000
- Design Units: Metric
- Outside Diameter: 2.5000
from RS Components, Ltd.
Thin section deep groove ball bearing 10 [See More]
- Type: Conrad / Deep Groove
- Bore: 0.3937
- Design Units: Metric
- Outside Diameter: 0.7480
from Pacific International Bearing, Inc.
Deep groove ball bearing. Thin [See More]
- Type: Conrad / Deep Groove
- Bore: 3.0000
- Design Units: Metric
- Outside Diameter: 3.5000
from RS Components, Ltd.
Thin section deep groove ball bearing 10 [See More]
- Type: Conrad / Deep Groove
- Bore: 0.3937
- Design Units: Metric
- Outside Diameter: 0.7480
from Pacific International Bearing, Inc.
Deep groove ball bearing. Thin [See More]
- Type: Conrad / Deep Groove
- Bore: 3.5000
- Design Units: Metric
- Outside Diameter: 4.0000
from RS Components, Ltd.
Thin section deep groove ball bearing 15 [See More]
- Type: Conrad / Deep Groove
- Bore: 0.5906
- Design Units: Metric
- Outside Diameter: 0.9449
from Pacific International Bearing, Inc.
Deep groove ball bearing. Thin [See More]
- Type: Conrad / Deep Groove
- Bore: 4.0000
- Design Units: Metric
- Outside Diameter: 4.5000
from RS Components, Ltd.
Thin section deep groove ball bearing 55 [See More]
- Type: Conrad / Deep Groove
- Bore: 2.1654
- Design Units: Metric
- Outside Diameter: 2.8346
from Pacific International Bearing, Inc.
Deep groove ball bearing. Thin [See More]
- Type: Conrad / Deep Groove
- Bore: 4.7500
- Design Units: Metric
- Outside Diameter: 5.2500
from RS Components, Ltd.
Thin section deep groove ball bearing 65 [See More]
- Type: Conrad / Deep Groove
- Bore: 2.5591
- Design Units: Metric
- Outside Diameter: 3.3465
from Pacific International Bearing, Inc.
Deep groove ball bearing. Thin [See More]
- Type: Conrad / Deep Groove
- Bore: 5.0000
- Design Units: Metric
- Outside Diameter: 5.5000
from RS Components, Ltd.
Thin section deep groove ball bearing 10 [See More]
- Type: Conrad / Deep Groove
- Bore: 0.3937
- Design Units: Metric
- Outside Diameter: 0.8661
from Pacific International Bearing, Inc.
Deep groove ball bearing. Thin [See More]
- Type: Conrad / Deep Groove
- Bore: 0.9843
- Design Units: Metric
- Outside Diameter: 1.3750
from RS Components, Ltd.
Thin section deep groove ball bearing 12 [See More]
- Type: Conrad / Deep Groove
- Bore: 0.4724
- Design Units: Metric
- Outside Diameter: 0.9449
from Pacific International Bearing, Inc.
Deep groove ball bearing. Thin [See More]
- Type: Conrad / Deep Groove
- Bore: 3.5039
- Design Units: Metric
- Outside Diameter: 4.1250
from RS Components, Ltd.
Thin section deep groove ball bearing 25 [See More]
- Type: Conrad / Deep Groove
- Bore: 0.9843
- Design Units: Metric
- Outside Diameter: 1.6535
from Pacific International Bearing, Inc.
Deep groove ball bearing. Thin [See More]
- Type: Conrad / Deep Groove
- Bore: 8.0000
- Design Units: Metric
- Outside Diameter: 8.7500
from Pacific International Bearing, Inc.
Deep groove ball bearing. Thin [See More]
- Type: Conrad / Deep Groove
- Bore: 10.0000
- Design Units: Metric
- Outside Diameter: 11.0000
from Pacific International Bearing, Inc.
Deep groove ball bearing. Thin [See More]
- Type: Conrad / Deep Groove
- Bore: 11.0000
- Design Units: Metric
- Outside Diameter: 12.0000
from Pacific International Bearing, Inc.
Deep groove ball bearing. Thin [See More]
- Type: Conrad / Deep Groove
- Bore: 9.0000
- Design Units: Metric
- Outside Diameter: 10.5000
from Pacific International Bearing, Inc.
Deep groove ball bearing. Thin [See More]
- Type: Conrad / Deep Groove
- Bore: 11.0000
- Design Units: Metric
- Outside Diameter: 12.5000
from Pacific International Bearing, Inc.
Deep groove ball bearing. Thin [See More]
- Type: Conrad / Deep Groove
- Bore: 6.5000
- Design Units: Metric
- Outside Diameter: 8.5000
from Pacific International Bearing, Inc.
Deep groove ball bearing. Thin [See More]
- Type: Conrad / Deep Groove
- Bore: 9.0000
- Design Units: Metric
- Outside Diameter: 11.0000
from Pacific International Bearing, Inc.
Deep groove ball bearing. Thin [See More]
- Type: Conrad / Deep Groove
- Bore: 10.0000
- Design Units: Metric
- Outside Diameter: 12.0000
from Pacific International Bearing, Inc.
Deep groove ball bearing. Thin [See More]
- Type: Conrad / Deep Groove
- Bore: 18.0000
- Design Units: Metric
- Outside Diameter: 20.0000
from Pacific International Bearing, Inc.
Deep groove ball bearing. Thin [See More]
- Type: Conrad / Deep Groove
- Bore: 25.0000
- Design Units: Metric
- Outside Diameter: 27.0000
from Pacific International Bearing, Inc.
Deep groove ball bearing. Thin [See More]
- Type: Conrad / Deep Groove
- Bore: 4.5000
- Design Units: Metric
- Outside Diameter: 5.2500
from Pacific International Bearing, Inc.
Deep groove ball bearing. Thin [See More]
- Type: Conrad / Deep Groove
- Bore: 6.0000
- Design Units: Metric
- Outside Diameter: 6.7500
from Pacific International Bearing, Inc.
Deep groove ball bearing. Thin [See More]
- Type: Conrad / Deep Groove
- Bore: 6.5000
- Design Units: Metric
- Outside Diameter: 7.2500
from Pacific International Bearing, Inc.
Deep groove ball bearing. Thin [See More]
- Type: Conrad / Deep Groove
- Bore: 7.0000
- Design Units: Metric
- Outside Diameter: 7.7500
from Pacific International Bearing, Inc.
Deep groove ball bearing. Thin [See More]
- Type: Conrad / Deep Groove
- Bore: 7.5000
- Design Units: Metric
- Outside Diameter: 8.2500
from Pacific International Bearing, Inc.
Deep groove ball bearing. Thin [See More]
- Type: Conrad / Deep Groove
- Bore: 11.0000
- Design Units: Metric
- Outside Diameter: 11.7500
from Pacific International Bearing, Inc.
EZO Brand / 10mm X 15mm X 3mm / Single Row Radial / Deep Groove Ball Ball Bearing / Two Contact Rubber Seals [See More]
- Type: Conrad / Deep Groove
- Bore: 0.3937
- Design Units: Metric
- Outside Diameter: 0.5906
from Emerson Bearing Co.
Thin Section bearings are optimal where the major design constraints are space, weight and load. They are available with metal shields (ZZ) or rubber seals (2RS). The available bore dimension range from 10mm to 200mm. [See More]
- Type: Conrad / Deep Groove
- Outside Diameter: 1.2598
- Bore: 0.5906
- Static Radial: 641
from National Precision Bearing, Inc.
The C-Type, radial contact ball bearing is designed with deep ball grooves to withstand high loads. Although this bearing is used primarily in applications with radial loads, it can withstand moderate axial loads, reversing axial loads, and moment loads. Please contact Silverthin for radial bearing... [See More]
- Type: Conrad / Deep Groove
- Bore: 2.0000 to 6.5000
- Design Units: Inch
- Outside Diameter: 2.5000 to 7.0000
from KAYDON Bearings
REALI-SLIM MM ™ Metric Thin Section bearings are the key to compact, light weight designs. They are ideal for machine tools, robots, SME equipment, medical, radar, satellite and communications equipment...anywhere that design simplicity, miniaturization, and reduced manufacturing costs are the... [See More]
- Type: Conrad / Deep Groove
- Bore: 0.9843
- Design Units: Metric
- Outside Diameter: 1.6142
from EZO SPB-USA, LLC
larger image [See More]
- Type: Conrad / Deep Groove
- Bore: 0.3750
- Design Units: Metric
- Outside Diameter: 0.6250
from Thin Section Bearings Of America
Ball Quantity: 27. Ball Diameter: 1/8. Pitch: 2.250 [See More]
- Type: Conrad / Deep Groove
- Bore: 2.0000
- Design Units: Inch
- Outside Diameter: 2.5000
from SilverThin Bearing Group of Mechatronics Inc.
Industry Part Number Interchange. Standard Bearings from 1-inch bore to 35-inch bore, with Specials upon request. Application Engineering Services available [See More]
- Type: Conrad / Deep Groove
- Bore: 2.0000
- Design Units: Inch
- Outside Diameter: 2.5000
from Schatz Bearing Corp.
Schatz manufactures a broad line of aircraft ball bearings used in aircraft control, aircraft accessory, and aircraft gearbox applications. Many of our aircraft bearings are manufactured and approved to the applicable SAE and U.S. Government military standards, controlled by AS7949 (formerly... [See More]
- Type: Conrad / Deep Groove
- Bore: 0.6250
- Design Units: Inch
- Outside Diameter: 1.0625
from RBC Bearings
This C-Type series sealed thin section ball bearing is made from 52100 steel, has two seals made of molded rubber, and utilizes a snap-over cage design made of brass or composite material. This bearing is designed for applications with primarily radial loads, and is manufactured to ABEC 1F precision... [See More]
- Type: Conrad / Deep Groove
- Bore: 4.0000
- Design Units: Inch
- Outside Diameter: 4.7500
from Quality Bearings & Components
Thin Section | Conrad Style. BALL BEARINGS – INCH. • 52100 Chrome Steel. • Conrad Radial Contact. • Snap-Over Cage. • ABEC 1. NOTE: Large sizes available upon request. Stainless Steel available upon special request. Minimum buy quantites may apply. [See More]
- Type: Conrad / Deep Groove
- Bore: 2.0000
- Design Units: Inch
- Outside Diameter: 2.5000
from National Precision Bearing, Inc.
The C-Type, radial contact ball bearing is designed with deep ball grooves to withstand high loads. Although this bearing is used primarily in applications with radial loads, it can withstand moderate axial loads, reversing axial loads, and moment loads. Please contact Silverthin for radial bearing... [See More]
- Type: Conrad / Deep Groove
- Bore: 2.0000 to 6.5000
- Design Units: Inch
- Outside Diameter: 2.6250 to 7.1250
from KAYDON Bearings
Here's a low profile, large bore bearing that's destined to change your thinking about robotics, inspection equipment, satellites, cameras and similar applications where precise positioning and lightweight designs are critical. At just 2.5mm wide, ULTRA-SLIM ® bearings are available for an array... [See More]
- Type: Conrad / Deep Groove
- Bore: 1.3780
- Design Units: Metric
- Outside Diameter: 1.6142
from EZO SPB-USA, LLC
Extra Thin Shield Metric ER Series Bearings Bearings also available with single shield or seal : suffix ZS or TS. [See More]
- Type: Conrad / Deep Groove
- Bore: 0.3750
- Design Units: Metric
- Outside Diameter: 0.6250
from Schatz Bearing Corp.
Schatz manufactures a broad line of aircraft ball bearings used in aircraft control, aircraft accessory, and aircraft gearbox applications. Many of our aircraft bearings are manufactured and approved to the applicable SAE and U.S. Government military standards, controlled by AS7949 (formerly... [See More]
- Type: Conrad / Deep Groove
- Bore: 0.6250
- Design Units: Inch
- Outside Diameter: 1.0625
from National Precision Bearing, Inc.
The C-Type, radial contact ball bearing is designed with deep ball grooves to withstand high loads. Although this bearing is used primarily in applications with radial loads, it can withstand moderate axial loads, reversing axial loads, and moment loads. Please contact Silverthin for radial bearing... [See More]
- Type: Conrad / Deep Groove
- Bore: 4.0000 to 12.0000
- Design Units: Inch
- Outside Diameter: 4.7500 to 12.7500
from KAYDON Bearings
The REALI-SLIM ® sealed thin section bearings product line consists of five series. They are available with integral seals, pre-lubricated with grease from the factory, and available for quick delivery. The standard sealing element material is nitrile rubber (other materials can be used) and the... [See More]
- Type: Conrad / Deep Groove
- Bore: 2.0000
- Design Units: Inch
- Outside Diameter: 2.5000
from EZO SPB-USA, LLC
Flanged Open Extra Thin Metric Bearings All bearings are available in 52100 Chrome Steel or 440 Stainless Steel. [See More]
- Type: Conrad / Deep Groove
- Bore: 0.3937
- Design Units: Metric
- Outside Diameter: 0.7480
from National Precision Bearing, Inc.
In applications with axial loads in one direction the A-Type, angular contact ball bearing should be used. This bearing also works well in radial or combined radial-thrust applications. The A-Type bearing should never be used alone to support moment loads or reversing axial loading. Two A-Type... [See More]
- Type: Conrad / Deep Groove
- Bore: 2.0000 to 12.0000
- Design Units: Inch
- Outside Diameter: 2.5000 to 12.5000
from KAYDON Bearings
KAYDON stainless steel bearings are used. where high precision and corrosion resistance. are required. In today's manufacturing environment, bearings are. often required: to operate in close proximity to corrosive chemicals. to operate with lubricants which do not protect against corrosion. to be... [See More]
- Type: Conrad / Deep Groove
- Bore: 2.0000
- Design Units: Inch
- Outside Diameter: 2.5000
from EZO SPB-USA, LLC
Flanged Shielded Extra Thin Metric Bearings All bearings are available in 52100 Chrome Steel or 440 Stainless Steel. Bearings also available with single shield or seal : suffix Z, RS, RU. [See More]
- Type: Conrad / Deep Groove
- Bore: 0.3937
- Design Units: Metric
- Outside Diameter: 0.7480
from National Precision Bearing, Inc.
The C-Type, radial contact ball bearing is designed with deep ball grooves to withstand high loads. Although this bearing is used primarily in applications with radial loads, it can withstand moderate axial loads, reversing axial loads, and moment loads. Please contact Silverthin for radial bearing... [See More]
- Type: Conrad / Deep Groove
- Bore: 2.0000 to 12.0000
- Design Units: Inch
- Outside Diameter: 2.5000 to 12.5000
from EZO SPB-USA, LLC
All bearings are available in 52100 Chrome Steel or 440 Stainless Steel. [See More]
- Type: Conrad / Deep Groove
- Bore: 0.3937
- Design Units: Metric
- Outside Diameter: 0.7480
from National Precision Bearing, Inc.
In applications with axial loads in one direction the A-Type, angular contact ball bearing should be used. This bearing also works well in radial or combined radial-thrust applications. The A-Type bearing should never be used alone to support moment loads or reversing axial loading. Two A-Type... [See More]
- Type: Conrad / Deep Groove
- Bore: 1.0000 to 1.7500
- Design Units: Inch
- Outside Diameter: 1.3750 to 2.1250
from EZO SPB-USA, LLC
All bearings are available in 52100 Chrome Steel or 440 Stainless Steel. Bearings also available with single shield or seal : suffix Z, RS, RU. [See More]
- Type: Conrad / Deep Groove
- Bore: 0.3937
- Design Units: Metric
- Outside Diameter: 0.7480
from National Precision Bearing, Inc.
The C-Type, radial contact ball bearing is designed with deep ball grooves to withstand high loads. Although this bearing is used primarily in applications with radial loads, it can withstand moderate axial loads, reversing axial loads, and moment loads. Please contact Silverthin for radial bearing... [See More]
- Type: Conrad / Deep Groove
- Bore: 1.0000 to 1.7500
- Design Units: Inch
- Outside Diameter: 1.3750 to 2.1250
from National Precision Bearing, Inc.
In applications with axial loads in one direction the A-Type, angular contact ball bearing should be used. This bearing also works well in radial or combined radial-thrust applications. The A-Type bearing should never be used alone to support moment loads or reversing axial loading. Two A-Type... [See More]
- Type: Conrad / Deep Groove
- Bore: 2.0000 to 20.0000
- Design Units: Inch
- Outside Diameter: 2.6250 to 20.6250
from National Precision Bearing, Inc.
The C-Type, radial contact ball bearing is designed with deep ball grooves to withstand high loads. Although this bearing is used primarily in applications with radial loads, it can withstand moderate axial loads, reversing axial loads, and moment loads. Please contact Silverthin for radial bearing... [See More]
- Type: Conrad / Deep Groove
- Bore: 2.0000 to 20.0000
- Design Units: Inch
- Outside Diameter: 2.6250 to 20.6250
from National Precision Bearing, Inc.
In applications with axial loads in one direction the A-Type, angular contact ball bearing should be used. This bearing also works well in radial or combined radial-thrust applications. The A-Type bearing should never be used alone to support moment loads or reversing axial loading. Two A-Type... [See More]
- Type: Conrad / Deep Groove
- Bore: 4.0000 to 30.0000
- Design Units: Inch
- Outside Diameter: 4.7500 to 30.7500
from National Precision Bearing, Inc.
The C-Type, radial contact ball bearing is designed with deep ball grooves to withstand high loads. Although this bearing is used primarily in applications with radial loads, it can withstand moderate axial loads, reversing axial loads, and moment loads. Please contact Silverthin for radial bearing... [See More]
- Type: Conrad / Deep Groove
- Bore: 4.0000 to 30.0000
- Design Units: Inch
- Outside Diameter: 4.7500 to 30.7500
from National Precision Bearing, Inc.
In applications with axial loads in one direction the A-Type, angular contact ball bearing should be used. This bearing also works well in radial or combined radial-thrust applications. The A-Type bearing should never be used alone to support moment loads or reversing axial loading. Two A-Type... [See More]
- Type: Conrad / Deep Groove
- Bore: 4.0000 to 30.0000
- Design Units: Inch
- Outside Diameter: 5.0000 to 31.0000
from National Precision Bearing, Inc.
The C-Type, radial contact ball bearing is designed with deep ball grooves to withstand high loads. Although this bearing is used primarily in applications with radial loads, it can withstand moderate axial loads, reversing axial loads, and moment loads. Please contact Silverthin for radial bearing... [See More]
- Type: Conrad / Deep Groove
- Bore: 4.0000 to 30.0000
- Design Units: Inch
- Outside Diameter: 5.0000 to 31.0000
from National Precision Bearing, Inc.
In applications with axial loads in one direction the A-Type, angular contact ball bearing should be used. This bearing also works well in radial or combined radial-thrust applications. The A-Type bearing should never be used alone to support moment loads or reversing axial loading. Two A-Type... [See More]
- Type: Conrad / Deep Groove
- Bore: 4.0000 to 35.0000
- Design Units: Inch
- Outside Diameter: 5.5000 to 36.5000
from National Precision Bearing, Inc.
The C-Type, radial contact ball bearing is designed with deep ball grooves to withstand high loads. Although this bearing is used primarily in applications with radial loads, it can withstand moderate axial loads, reversing axial loads, and moment loads. Please contact Silverthin for radial bearing... [See More]
- Type: Conrad / Deep Groove
- Bore: 4.0000 to 35.0000
- Design Units: Inch
- Outside Diameter: 5.5000 to 36.5000
from National Precision Bearing, Inc.
In applications with axial loads in one direction the A-Type, angular contact ball bearing should be used. This bearing also works well in radial or combined radial-thrust applications. The A-Type bearing should never be used alone to support moment loads or reversing axial loading. Two A-Type... [See More]
- Type: Conrad / Deep Groove
- Bore: 4.0000 to 35.0000
- Design Units: Inch
- Outside Diameter: 6.0000 to 37.0000
from National Precision Bearing, Inc.
The C-Type, radial contact ball bearing is designed with deep ball grooves to withstand high loads. Although this bearing is used primarily in applications with radial loads, it can withstand moderate axial loads, reversing axial loads, and moment loads. Please contact Silverthin for radial bearing... [See More]
- Type: Conrad / Deep Groove
- Bore: 4.0000 to 35.0000
- Design Units: Inch
- Outside Diameter: 6.0000 to 37.0000