Surface Mount Technology (SMT) RF Power Dividers and RF Power Combiners
from Skyworks Solutions, Inc.
Please note: SKY16406-381LF is being discontinued and is not recommended for new designs. The SKY16406-381LF is a 50 Ohm, in-phase combiner/splitter tuned for the 2.2 – 2.8 GHz band. The monolithic circuitry is 100% passive and offers low loss, high isolation and exceptional phase/amplitude. [See More]
- Package Type / Form Factor: Surface Mount; DFN, 6-pin
- 0º Power Divider Division:: 2-Way
- Category: Passive
- Frequency: 2200.00 to 2800.00
from Marki Microwave LLC
The MPD-0R402FCSP2 is a small footprint MMIC 2-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package. The MPD-0R402FCSP2 uses a mix of lumped element and distributed circuits to significantly reduce the footprint while maintaining isolation at low... [See More]
- Package Type / Form Factor: Surface Mount; surface-mount
- Frequency: 400.00 to 2500.00
from Knowles Precision Devices
Ideal for applications where small size and broadband performance are critical for success. While resistive dividers work very well from DC to mm wavelength frequencies the isolation of a resistive divider is only equal to the nominal power splitting of the device (ie. 6 dB on a two way splitter). [See More]
- Package Type / Form Factor: Surface Mount
- Frequency: 40000.00
- Category: Passive
- Insertion Loss: 0.50
from Crane Aerospace & Electronics
Package Type | Surface Mount. Environmental Screening | Catalogue, Mil-screened [See More]
- Package Type / Form Factor: Surface Mount; Surface Mount
from Richardson RFPD
Richardson RFPD, an Arrow Company, is a specialized electronic component distributor providing design engineers with deep technical expertise and localized global design support for the latest new products from the world's leading suppliers of RF, Wireless, Energy and Power Technologies. [See More]
- Package Type / Form Factor: Surface Mount; Surface Mount
- Frequency: 5.00 to 1000.00
- 0º Power Divider Division:: 2-Way
- Insertion Loss: 0.80
from Marki Microwave LLC
The MPD-0R402SCSP2 is a small footprint MMIC 2-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package. The MPD-0R402SCSP2 uses a mix of lumped element and distributed circuits to significantly reduce the footprint while maintaining isolation at low... [See More]
- Package Type / Form Factor: Surface Mount; surface-mount
- Frequency: 400.00 to 2500.00
from Richardson RFPD
MACOM ’s MAPD-011020 is a 2 way 0 º power divider in a low cost, surface mount package. Ideally suited for high volume broadband CATV applications. [See More]
- Package Type / Form Factor: Surface Mount; Surface Mount
- Frequency: 5.00 to 1200.00
- 0º Power Divider Division:: 2-Way
- Insertion Loss: 0.90
from Marki Microwave LLC
The MPD2-00001PSM is a small footprint MMIC 2-Way Wilkinson power divider/power splitter featuring high isolation in our compact DFN package. The MPD2-00001PSM uses a mix of lumped element and distributed circuits to significantly reduce the footprint while maintaining isolation at low frequencies. [See More]
- Package Type / Form Factor: Surface Mount; surface-mount
- Frequency: 400.00 to 4000.00
from Marki Microwave LLC
The MPD4-0R404CSP2 is a small footprint MMIC 4-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package. The MPD4-0R404CSP2 uses a mix of lumped element and distributed circuits to significantly reduce the footprint while maintaining isolation at low... [See More]
- Package Type / Form Factor: Surface Mount; surface-mount
- Frequency: 400.00 to 4000.00
from Marki Microwave LLC
The MPD4-0R504CSP2 is a small footprint MMIC 4-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package. The MPD4-0R504CSP2 uses a mix of lumped element and distributed circuits to significantly reduce the footprint while maintaining isolation at low... [See More]
- Package Type / Form Factor: Surface Mount; surface-mount
- Frequency: 500.00 to 4500.00
from Marki Microwave LLC
The MPBR-0122CSP3 is a small footprint MMIC 1-22 GHz 2-Way high isolation power divider/power splitter featuring high 31 dB isolation and low 2 dB insertion loss in our compact CSP3 chip scale package. It is much smaller than a printed PCB Power Divider/Combiner. It can be used as an equal... [See More]
- Package Type / Form Factor: Surface Mount; surface-mount
- Frequency: 1000.00 to 22000.00
from Marki Microwave LLC
The MPD-0108FCSP2 is a small footprint MMIC 2-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package. The MPD-0108FCSP2 uses a mix of lumped element and distributed circuits to significantly reduce the footprint while maintaining isolation at low... [See More]
- Package Type / Form Factor: Surface Mount; surface-mount
- Frequency: 1000.00 to 8000.00
from Marki Microwave LLC
The MPD-0108SCSP2 is a small footprint MMIC 2-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package. The MPD-0108SCSP2 uses a mix of lumped element and distributed circuits to significantly reduce the footprint while maintaining isolation at low... [See More]
- Package Type / Form Factor: Surface Mount; surface-mount
- Frequency: 1000.00 to 8000.00
from Marki Microwave LLC
The MPD4-0108CSP2 is a small footprint MMIC 4-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package. The MPD4-0108CSP2 uses a mix of lumped element and distributed circuits to significantly reduce the footprint while maintaining isolation at low... [See More]
- Package Type / Form Factor: Surface Mount; surface-mount
- Frequency: 1000.00 to 8000.00
from Marki Microwave LLC
The MPD-1260FCSP2 is a small footprint MMIC 2-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package. The MPD-1260FCSP2 uses a mix of lumped element and distributed circuits to significantly reduce the footprint while maintaining isolation at low... [See More]
- Package Type / Form Factor: Surface Mount; surface-mount
- Frequency: 12000.00 to 60000.00
from Marki Microwave LLC
The MPD-1260SCSP2 is a small footprint MMIC 2-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package. The MPD-1260SCSP2 uses a mix of lumped element and distributed circuits to significantly reduce the footprint while maintaining isolation at low... [See More]
- Package Type / Form Factor: Surface Mount; surface-mount
- Frequency: 12000.00 to 60000.00
from Marki Microwave LLC
The MPD4-1260CSP2 is a small footprint MMIC 12-60 GHz 4-Way power divider/power splitter featuring high 29 dB isolation and low 1.1 dB insertion loss in our compact CSP2 chip scale package. It is much smaller than a printed PCB Wilkinson Power Divider/Combiner. It can be used as an equal... [See More]
- Package Type / Form Factor: Surface Mount; surface-mount
- Frequency: 12000.00 to 60000.00
from Marki Microwave LLC
The MPD-0222FCSP2 is a small footprint MMIC 2-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package. The MPD-0222FCSP2 uses a mix of lumped element and distributed circuits to significantly reduce the footprint while maintaining isolation at low... [See More]
- Package Type / Form Factor: Surface Mount; surface-mount
- Frequency: 2000.00 to 22000.00
from Marki Microwave LLC
The MPD-0222SCSP2 is a small footprint MMIC 2-22 GHz 2-Way power divider/power splitter featuring high 22 dB isolation and low 0.7 dB insertion loss in our compact 2.5 mm CSP2 chip scale package. It is much smaller than a printed PCB Wilkinson Power Divider/Combiner. It can be used as an equal... [See More]
- Package Type / Form Factor: Surface Mount; surface-mount
- Frequency: 2000.00 to 22000.00
from Marki Microwave LLC
The MPD4-0218CSP3 is a small footprint MMIC 2-18 GHz 4-Way power divider/power splitter featuring high 29 dB isolation and low 0.8 dB excess insertion loss in our compact CSP3 chip scale package. It is much smaller than a printed PCB Wilkinson Power Divider/Combiner. It can be used as an equal... [See More]
- Package Type / Form Factor: Surface Mount; surface-mount
- Frequency: 2000.00 to 18000.00
from Marki Microwave LLC
The MPD-0422FCSP2 is a small footprint MMIC 2-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package. The MPD-0422FCSP2 uses a mix of lumped element and distributed circuits to significantly reduce the footprint while maintaining isolation at low... [See More]
- Package Type / Form Factor: Surface Mount; surface-mount
- Frequency: 4000.00 to 22000.00
from Marki Microwave LLC
The MPD-0422SCSP2 is a small footprint MMIC 2-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package. The MPD-0422SCSP2 uses a mix of lumped element and distributed circuits to significantly reduce the footprint while maintaining isolation at low... [See More]
- Package Type / Form Factor: Surface Mount; surface-mount
- Frequency: 4000.00 to 22000.00
from Marki Microwave LLC
The MPD4-0422CSP2 is a small footprint MMIC 4-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package. The MPD4-0422CSP2 uses a mix of lumped element and distributed circuits to significantly reduce the footprint while maintaining isolation at low... [See More]
- Package Type / Form Factor: Surface Mount; surface-mount
- Frequency: 4000.00 to 22000.00
from Marki Microwave LLC
The MPBR-0022CSP3 is a small footprint MMIC DC-22 GHz 2-Way high isolation power divider/power splitter featuring high 35 dB isolation and 4.6 dB insertion loss in our compact CSP3 chip scale package. It is much smaller than a printed PCB Power Divider/Combiner. It can be used as an equal... [See More]
- Package Type / Form Factor: Surface Mount; surface-mount
- Frequency: 0.00 to 22000.00
from Marki Microwave LLC
MPD-0226SM is a MMIC 2-way Wilkinson power divider. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. Tight fabrication tolerances result in less unit to unit variation than traditional power divider technologies,... [See More]
- Package Type / Form Factor: Surface Mount; surface-mount
- Frequency: 2000.00 to 26500.00
from Anaren, Inc.
Welcome to our Xinger ®-brand Doherty Combiner product line. Xinger ®-brand Doherty combiners offer significant size advantages compared to printed Doherty combiners, with equivalent or better performance. They are surface-mountable, ideal for high power handling, and offer excellent... [See More]
- Package Type / Form Factor: Surface Mount
- Insertion Loss: 0.15
- Frequency: 728.00 to 768.00
- Power: 200.00
from Emhiser Research, Inc.
Reliability. All units are designed and constructed to meet or exceed specifications after exposure to any or all of the following MIL-STD-202 tests which are applicable. [See More]
- Package Type / Form Factor: Surface Mount
- Divider / Combiner Type: 180º Hybrid
- Category: Passive
- Frequency: 0.30 to 300.00
from Menlo Microsystems, Inc.
The MM101 is an 8-Channel Low-Voltage Serial to High-Voltage Parallel Converter with Push-Pull Outputs and an Internal Charge Pump Converter. The device is designed for MEMS applications where high voltage generation and driving capability are desired in a high integration form factor. The internal... [See More]
- Package Type / Form Factor: Surface Mount
from Pulsar Microwave Corporation
RoHS compliant, Custom frequency bands &optimized specifications available [See More]
- Package Type / Form Factor: Surface Mount
- Divider / Combiner Type: 0º
- Category: Passive
- 0º Power Divider Division:: 2-Way
from Merrimac Industries, Inc.
The Multi-Mix PICO ® PDD-Z series provides an in-phase, binary power divider with low insertion loss in a small outline. Accurate phase and amplitude balance make them ideal for applications involving IQ networks, power amplifiers, signal distribution and processing. PDD-Z power dividers are... [See More]
- Package Type / Form Factor: Surface Mount
- Frequency: 2000.00 to 4000.00
- Divider / Combiner Type: 0º
- Insertion Loss: 0.45
from Anaren, Inc.
Welcome to our Xinger ®-brand Power Dividers product line. Anaren is pleased to bring you its Xinger ®-brand power divider family for 50 and 75ohms. These low-profile, sub-miniature Wilkinson power dividers offer an easy-to-use, surface-mount package that is ideal for high-volume... [See More]
- Package Type / Form Factor: Surface Mount
- Insertion Loss: 0.70
- Frequency: 400.00 to 900.00
- Power: 2.00
from Emhiser Research, Inc.
Features. Fully Hermetic Package. Surface Mount. Excellent Balance [See More]
- Package Type / Form Factor: Surface Mount
- Divider / Combiner Type: 0º
- Category: Passive
- 0º Power Divider Division:: 2-Way
from Emhiser Research, Inc.
Features. Small Footprint (0.12 in ²). <0.3 dB Midband Loss [See More]
- Package Type / Form Factor: Surface Mount
- Divider / Combiner Type: 0º
- Category: Passive
- 0º Power Divider Division:: 2-Way
from Emhiser Research, Inc.
Features. >Cellular Bands. Small Footprint (0.1 in ²). <1 dB Midband Loss. >18 dB Midband Isolation [See More]
- Package Type / Form Factor: Surface Mount
- Divider / Combiner Type: 180°
- Category: Passive
- 0º Power Divider Division:: 2-Way
from Emhiser Research, Inc.
Features. <0.25 dB Amplitude Balance. 1 ° Phase Balance Typical. Surface Mount. Low Cost [See More]
- Package Type / Form Factor: Surface Mount
- Divider / Combiner Type: 90º Hybrid
- Category: Passive
- Frequency: 580.00 to 680.00
from Emhiser Research, Inc.
Features. <0.25 dB Amplitude Balance. 1 ° Phase Balance Typical. Small Footprint (0.1 in ²). Low Cost [See More]
- Package Type / Form Factor: Surface Mount
- Divider / Combiner Type: 90º Hybrid
- Category: Passive
- Frequency: 243.00 to 270.00
from Emhiser Research, Inc.
Reliability. All units are designed and constructed to meet or exceed. specifications after exposure to any or all of the following MIL-STD-. 202 tests which are applicable. [See More]
- Package Type / Form Factor: Surface Mount
- Divider / Combiner Type: 90º Hybrid
- Category: Passive
- Frequency: 59.00 to 69.00