Passive RF Power Dividers and RF Power Combiners
from Knowles Precision Devices
Ideal for applications where small size and broadband performance are critical for success. While resistive dividers work very well from DC to mm wavelength frequencies the isolation of a resistive divider is only equal to the nominal power splitting of the device (ie. 6 dB on a two way splitter). [See More]
- Category: Passive
- Frequency: 40000.00
- Package Type / Form Factor: Surface Mount
- Insertion Loss: 0.50
from Skyworks Solutions, Inc.
Active Splitter [See More]
- Category: Passive
from Werbel Microwave LLC
16 Count, L Band 1:4 Passive Splitters, DC Blocked, 4U Rack Mount. Rack mount assemblies and enclosures are built to order. Typical lead time is 2-4 weeks. Customized assemblies are available. Please contact us with your specific requirements. Longer lead times may apply. [See More]
- Category: Passive
- Package Type / Form Factor: Rack mount unit
from Skyworks Solutions, Inc.
Five-way active power splitter [See More]
- Category: Passive
- 0º Power Divider Division:: 5-Way
from Skyworks Solutions, Inc.
Please note: SKY16406-381LF is being discontinued and is not recommended for new designs. The SKY16406-381LF is a 50 Ohm, in-phase combiner/splitter tuned for the 2.2 – 2.8 GHz band. The monolithic circuitry is 100% passive and offers low loss, high isolation and exceptional phase/amplitude. [See More]
- Category: Passive
- Package Type / Form Factor: Surface Mount; DFN, 6-pin
- 0º Power Divider Division:: 2-Way
- Frequency: 2200.00 to 2800.00
from MACOM
MACOM ’s power combiners and dividers are used in aerospace and defense, wireless, and wireline communications applications. These devices can also be used for broadband CATV applications. They are available in a variety of connectorized and surface mount packages. Available in subsets... [See More]
- Category: Passive
- 0º Power Divider Division:: 2-Way (optional feature); 3-Way (optional feature); 4-Way (optional feature); 8-Way (optional feature)
- Divider / Combiner Type: 0º (optional feature); 90º Hybrid (optional feature); 180º Hybrid (optional feature)
- Package Type / Form Factor: Flatpack
from Emhiser Research, Inc.
Reliability. All units are designed and constructed to meet or exceed specifications after exposure to any or all of the following MIL-STD-202 tests which are applicable. [See More]
- Category: Passive
- Package Type / Form Factor: Surface Mount
- Divider / Combiner Type: 180º Hybrid
- Frequency: 0.30 to 300.00
from Temwell Corporation / Temstron Co., Ltd.
Bandpass splitter, available in stock, delivery in 72 hours [See More]
- Category: Passive
- 0º Power Divider Division:: 2-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Connectorized
from Picosecond Pulse Labs, Inc.
Features. DC to >25GHz bandwidth. 12dB (4x) Insertion Loss. Excellent Return Loss. Accurate Amplitude and Phase Tracking. Applications. Data and Telecom Systems. Laboratory T &M. RF and Microwave. The Picosecond Advantage: A power divider design with excellent transient response, repeatable... [See More]
- Category: Passive
- Package Type / Form Factor: Connectorized
- 0º Power Divider Division:: 4-Way
- Connectors: SMA
from Comtelco Industries, Inc.
2-PORT COUPLER STACKER 150-250MHz FEMALE "N" TERMINATIONS [See More]
- Category: Passive
- 0º Power Divider Division:: 2-Way
- Divider / Combiner Type: 0º; Wide Band Coupler/Stacker
- Package Type / Form Factor: Connectorized
from JFW Industries, Inc.
Characteristics of Resistive Power Divider/Combiner. Resistive power dividers/combiners function all the way down to DC. Resistive Power dividers/combiners can be used to combine several signals or split a single signal. Due to their symmetric design, the isolation of a resistive divider/combiner is... [See More]
- Category: Passive
- Package Type / Form Factor: Connectorized
- 0º Power Divider Division:: 4-Way
- Connectors: SMA; Type N
from Spectrum Microwave
Designed to Meet MIL-E-5400 Class 3, SMA Female Connectors per MIL-PRF-39012, High Isolation Wilkinson Circuit Design [See More]
- Category: Passive
- 0º Power Divider Division:: 2-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Connectorized
from Pulsar Microwave Corporation
RoHS compliant, Custom frequency bands &optimized specifications available [See More]
- Category: Passive
- 0º Power Divider Division:: 12-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Connectorized
from Emhiser Research, Inc.
Features. >3 Decade Bandwidth. >40 dB Midband Isolation. <0.5 dB Midband Loss [See More]
- Category: Passive
- Package Type / Form Factor: Plugin
- Divider / Combiner Type: 180º Hybrid
- Frequency: 0.30 to 300.00
from Temwell Corporation / Temstron Co., Ltd.
Low pass splitter, available in stock, delivery in 72 hours [See More]
- Category: Passive
- 0º Power Divider Division:: 2-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Connectorized
from Picosecond Pulse Labs, Inc.
Features. 10 dB Pick-off. 50 ps Risetime. DC to 8 GHz Bandwidth. Applications. Laboratory T &M. RF and Microwave Systems. Description: Our Model 5340-10dB Pick-Off Tee is a broadband, resistive power divider tee with a 10 dB pick-off. The output of the pick-off port is a small replica of the... [See More]
- Category: Passive
- Package Type / Form Factor: Connectorized
- 0º Power Divider Division:: 2-Way
- Connectors: SMA
from Comtelco Industries, Inc.
2-PORT COUPLER STACKER 1100-2100MHz FEMALE "TNC" TERMINATIONS [See More]
- Category: Passive
- 0º Power Divider Division:: 2-Way
- Divider / Combiner Type: 0º; Wide Band Coupler/Stacker
- Package Type / Form Factor: Connectorized
from JFW Industries, Inc.
Characteristics of Resistive Power Divider/Combiner. Resistive power dividers/combiners function all the way down to DC. Resistive Power dividers/combiners can be used to combine several signals or split a single signal. Due to their symmetric design, the isolation of a resistive divider/combiner is... [See More]
- Category: Passive
- Package Type / Form Factor: Connectorized
- 0º Power Divider Division:: 2-Way
- Connectors: BNC; SMA; TNC; Type N
from Spectrum Microwave
Designed to Meet MIL-E-5400 Class 3, SMA Female Connectors per MIL-PRF-39012, High Isolation Wilkinson Circuit Design [See More]
- Category: Passive
- 0º Power Divider Division:: 3-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Connectorized
from Emhiser Research, Inc.
Applications. These Dividers where designed for cell site applications where Tele-Tech ’s proprietary processes guarantee low loss, high isolation, and uniform part-to-part performance. In addition Tele-Tech ’s plating process insures years of high performance under the worst... [See More]
- Category: Passive
- 0º Power Divider Division:: 12-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Connectorized
from Temwell Corporation / Temstron Co., Ltd.
Low pass splitter, available in stock, delivery in 72 hours [See More]
- Category: Passive
- 0º Power Divider Division:: 2-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Connectorized
from Picosecond Pulse Labs, Inc.
Features. DC to 20 GHz. 20 ps riseime. Excellent Symmetry. Splits Signals. Applications. Telecom and Data Systems. Laboratory T &M. RF and Microwave Systems. The Picosecond Advantage: The Model 5336 6 dB Power Splitter is a very broadband resistive tee that has also been used as a 100 Ohm... [See More]
- Category: Passive
- Package Type / Form Factor: Connectorized
- 0º Power Divider Division:: 2-Way
- Connectors: SMA
from Comtelco Industries, Inc.
2-PORT COUPLER STACKER 1500-3000MHz FEMALE "N" TERMINATIONS [See More]
- Category: Passive
- 0º Power Divider Division:: 2-Way
- Divider / Combiner Type: 0º; Wide Band Coupler/Stacker
- Package Type / Form Factor: Connectorized
from JFW Industries, Inc.
Characteristics of Resistive Power Divider/Combiner. Resistive power dividers/combiners function all the way down to DC. Resistive Power dividers/combiners can be used to combine several signals or split a single signal. Due to their symmetric design, the isolation of a resistive divider/combiner is... [See More]
- Category: Passive
- Package Type / Form Factor: Connectorized
- 0º Power Divider Division:: 2-Way
- Connectors: SMA
from Spectrum Microwave
Designed to Meet MIL-E-5400 Class 3, SMA Female Connectors per MIL-PRF-39012, High Isolation Wilkinson Circuit Design [See More]
- Category: Passive
- 0º Power Divider Division:: 4-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Connectorized
from Emhiser Research, Inc.
Features. SMA Connectors. <0.2 dB Midband Loss. Excellent Balance [See More]
- Category: Passive
- 0º Power Divider Division:: 2-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Connectorized
from Temwell Corporation / Temstron Co., Ltd.
Low pass splitter, available in stock, delivery in 72 hours [See More]
- Category: Passive
- 0º Power Divider Division:: 2-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Connectorized
from Picosecond Pulse Labs, Inc.
Features. DC to 40 GHz. 10 ps Risetime. 14 dB Pick-off. Applications. 40 Gb/s Data & Telecom. Systems. High Speed Pulse T &M. RF and Microwave. The Picosecond Advantage: Our Model 5361 Pick-Off Tee is a high speed resistive tee with excellent transient response in a compact package. This... [See More]
- Category: Passive
- Package Type / Form Factor: Connectorized
- 0º Power Divider Division:: 2-Way
- Connectors: 2.4mm (optional feature); 2.92mm (optional feature)
from Comtelco Industries, Inc.
2-PORT COUPLER STACKER 400-512MHz FEMALE "N" TERMINATIONS [See More]
- Category: Passive
- 0º Power Divider Division:: 2-Way
- Divider / Combiner Type: 0º; Wide Band Coupler/Stacker
- Package Type / Form Factor: Connectorized
from JFW Industries, Inc.
Characteristics of Resistive Power Divider/Combiner. Resistive power dividers/combiners function all the way down to DC. Resistive Power dividers/combiners can be used to combine several signals or split a single signal. Due to their symmetric design, the isolation of a resistive divider/combiner is... [See More]
- Category: Passive
- Package Type / Form Factor: Connectorized
- 0º Power Divider Division:: 4-Way
- Connectors: Type F; Type N
from Spectrum Microwave
Designed to Meet MIL-E-5400 Class 3, SMA Female Connectors per MIL-PRF-39012, High Isolation Wilkinson Circuit Design [See More]
- Category: Passive
- 0º Power Divider Division:: 8-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Connectorized
from Emhiser Research, Inc.
Applications. These Dividers where designed for cell site applications where Tele-Tech ’s proprietary processes guarantee low loss, high isolation, and uniform part-to-part performance. In addition Tele-Tech ’s plating process insures years of high performance under the worst... [See More]
- Category: Passive
- 0º Power Divider Division:: 2-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Connectorized
from Temwell Corporation / Temstron Co., Ltd.
Low pass splitter, available in stock, delivery in 72 hours [See More]
- Category: Passive
- 0º Power Divider Division:: 4-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Connectorized
from Picosecond Pulse Labs, Inc.
Features. DC to >25 GHz. <17 ps Risetime. 5x and 10x Pick-Off Ratios. Low Insertion Loss. Applications. Telecom Systems. Laboratory T &M. Microwave and RF. The Picosecond Advantage: Excellent transient response, repeatability, and temperature stability.Description: This Pick-off Tee is an... [See More]
- Category: Passive
- Package Type / Form Factor: Connectorized
- 0º Power Divider Division:: 2-Way
- Connectors: SMA
from Comtelco Industries, Inc.
2-PORT COUPLER STACKER 800-970MHz FEMALE "N" TERMINATIONS [See More]
- Category: Passive
- 0º Power Divider Division:: 2-Way
- Divider / Combiner Type: 0º; Wide Band Coupler/Stacker
- Package Type / Form Factor: Connectorized
from JFW Industries, Inc.
Characteristics of Resistive Power Divider/Combiner. Resistive power dividers/combiners function all the way down to DC. Resistive Power dividers/combiners can be used to combine several signals or split a single signal. Due to their symmetric design, the isolation of a resistive divider/combiner is... [See More]
- Category: Passive
- Package Type / Form Factor: Connectorized
- 0º Power Divider Division:: 2-Way
- Connectors: BNC; TNC; Type F; Type N
from Emhiser Research, Inc.
Features. Fully Hermetic Package. WJ H2 Equivalent. <0.25 dB Midband Loss. Excellent Balance [See More]
- Category: Passive
- 0º Power Divider Division:: 2-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Connectorized
from Temwell Corporation / Temstron Co., Ltd.
Low pass splitter, available in stock, delivery in 72 hours [See More]
- Category: Passive
- 0º Power Divider Division:: 4-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Connectorized
from Picosecond Pulse Labs, Inc.
Features. DC to 18 GHz. Highly Symmetric. Combines or Splits Signals. All Ports Matched to 50 Ω. Applications. Telecom and Data Systems. Laboratory T &M. RF and Microwave Systems. The Picosecond Advantage: The Model 5331 6 dB Power Divider is a very broadband, resistive tee with a 17 ps... [See More]
- Category: Passive
- Package Type / Form Factor: Connectorized
- 0º Power Divider Division:: 2-Way
- Connectors: SMA
from Comtelco Industries, Inc.
4-PORT OR QUAD COUPLER STACKER, 800-970MHz FEMALE "N" TERMINATIONS [See More]
- Category: Passive
- 0º Power Divider Division:: 4-Way
- Divider / Combiner Type: 0º; Wide Band Coupler/Stacker
- Package Type / Form Factor: Connectorized
from JFW Industries, Inc.
Model 75PD-188 is a 75 Ohm resistive 11-Way power divider/combiner. It is available with 75 Ohm F female RF connectors. It operates DC-2150 MHz and is rated for 1 Watt of RF input power. This 11-Way divider/combiner is constructed in a star configuration with 12 ports total. It has the functionality... [See More]
- Category: Passive
- 0º Power Divider Division:: 11-way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Connectorized
from Emhiser Research, Inc.
Reliability. All units are designed and constructed to meet or exceed specifications after exposure to any or all of the following MIL-STD-202 tests which are applicable. [See More]
- Category: Passive
- 0º Power Divider Division:: 2-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Flatpack
from Temwell Corporation / Temstron Co., Ltd.
Temwell extends service to all kinds of RF & Microwave components design and manufacture. Temstron is authorized to provide RF solutions in the field of Wireless Communications to steadily supply several markets such as Aerospace, Military, Medicals, etc. [See More]
- Category: Passive
- 0º Power Divider Division:: 3-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Connectorized
from Picosecond Pulse Labs, Inc.
Features. DC to 25 GHz. Excellent Return Loss. Accurate Amplitude and Phase. Tracking. Highly Symmetric. Combines or Splits Signals. Applications. Data and Telecom Systems. Laboratory T &M. RF and Microwave. The Picosecond Advantage: A power divider design with excellent transient response,... [See More]
- Category: Passive
- Package Type / Form Factor: Connectorized
- 0º Power Divider Division:: 2-Way
- Connectors: SMA
from JFW Industries, Inc.
Power divider/combiner assemblies are typically used with custom RF test equipment. If you have a specific application for a power divider/combiner assembly, please send us a block diagram of your requirement. JFW does not change NRE's for new power divider combiner assembly models. We pride... [See More]
- Category: Passive
- Package Type / Form Factor: Connectorized
- 0º Power Divider Division:: 12-Way
- Connectors: SMA; Type N
from Emhiser Research, Inc.
Features. High Performance. >30 dB Midband Isolation. Small Footprint [See More]
- Category: Passive
- 0º Power Divider Division:: 2-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Plugin
from Picosecond Pulse Labs, Inc.
Features. Combines or Divides Signals. 8 ps Risetime. >40 GHz Bandwidth. 2.92 or 2.4 mm Connectors. Applications. 40 G Telecom systems. Test and Measurement. RF and Microwave. TDR using the 4015C Pulse Generator. The Picosecond Advantage: Our Model 5350 is a small, high performance power divider... [See More]
- Category: Passive
- Package Type / Form Factor: Connectorized
- 0º Power Divider Division:: 2-Way
- Connectors: 2.4mm (optional feature); 2.92mm (optional feature)
from JFW Industries, Inc.
Model 50PD-836 N is a 50 Ohm reactive 2-Way power divider/combiner that operates 400-6000 MHz. It uses a reactive Wilkinson splitter design which is ideal when the application is to fan-in or fan-out RF signals with minimum loss. It is only available with N female coaxial RF connectors. It has one... [See More]
- Category: Passive
- 0º Power Divider Division:: 2-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Connectorized
from Emhiser Research, Inc.
Features. Fully Hermetic Package. WJ H2C Equivalent. <0.25 dB Midband Loss. Excellent Balance [See More]
- Category: Passive
- 0º Power Divider Division:: 2-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Plugin
from Picosecond Pulse Labs, Inc.
Features. Excellent Through-line Impedance Match. Minimizes Signal Reflections. DC to 26GHz. 5x (14dB) Pickoff. Applications. Pick-off of Clock Recovery Signals. Pick-off of Trigger Signals. High Integrity Signal Pick-off. The Picosecond Advantage: Maximum broadband performance with minimum signal... [See More]
- Category: Passive
- Package Type / Form Factor: Connectorized
- 0º Power Divider Division:: 2-Way
- Connectors: SMA
from JFW Industries, Inc.
Model 50PD-837 N is a 50 Ohm reactive 4-Way power divider/combiner that operates 400-6000 MHz. It uses a reactive Wilkinson splitter design which is ideal when the application is to fan-in or fan-out RF signals with minimum loss. It is only available with N female coaxial RF connectors. It has one... [See More]
- Category: Passive
- 0º Power Divider Division:: 4-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Connectorized
from Emhiser Research, Inc.
Features. Fully Hermetic Package. Surface Mount. Excellent Balance [See More]
- Category: Passive
- 0º Power Divider Division:: 2-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Surface Mount
from JFW Industries, Inc.
Model 50PD-838 N is a 50 Ohm reactive 8-Way power divider/combiner that operates 400-6000 MHz. It uses a reactive Wilkinson splitter design which is ideal when the application is to fan-in or fan-out RF signals with minimum loss. It is only available with N female coaxial RF connectors. It has one... [See More]
- Category: Passive
- 0º Power Divider Division:: 8-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Connectorized
from Emhiser Research, Inc.
Features. Small Footprint (0.12 in ²). <0.3 dB Midband Loss [See More]
- Category: Passive
- 0º Power Divider Division:: 2-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Surface Mount
from JFW Industries, Inc.
Model 50PD-846 SMA is a 50 Ohm reactive 2-Way power divider/combiner that operates 350-6000 MHz. It uses a reactive Wilkinson splitter design which is ideal when the application is to fan-in or fan-out RF signals with minimum loss. It is only available with SMA female coaxial RF connectors. It has... [See More]
- Category: Passive
- 0º Power Divider Division:: 2-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Connectorized
from Emhiser Research, Inc.
Features. >Cellular Bands. Small Footprint (0.1 in ²). <1 dB Midband Loss. >18 dB Midband Isolation [See More]
- Category: Passive
- 0º Power Divider Division:: 2-Way
- Divider / Combiner Type: 180°
- Package Type / Form Factor: Surface Mount
from JFW Industries, Inc.
Model 50PD-847 SMA is a 50 Ohm reactive 4-Way power divider/combiner that operates 350-6000 MHz. It uses a reactive Wilkinson splitter design which is ideal when the application is to fan-in or fan-out RF signals with minimum loss. It is only available with SMA female coaxial RF connectors. It has... [See More]
- Category: Passive
- 0º Power Divider Division:: 4-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Connectorized
from Emhiser Research, Inc.
Features. <0.25 dB Amplitude Balance. 1 ° Phase Balance Typical. Surface Mount. Low Cost [See More]
- Category: Passive
- Package Type / Form Factor: Surface Mount
- Divider / Combiner Type: 90º Hybrid
- Frequency: 580.00 to 680.00
from JFW Industries, Inc.
Model 50PD-848 SMA is a 50 Ohm reactive 8-Way power divider/combiner that operates 350-6000 MHz. It uses a reactive Wilkinson splitter design which is ideal when the application is to fan-in or fan-out RF signals with minimum loss. It is only available with SMA female coaxial RF connectors. It has... [See More]
- Category: Passive
- 0º Power Divider Division:: 8-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Connectorized
from Emhiser Research, Inc.
Reliability. All units are designed and constructed to meet or exceed. specifications after exposure to any or all of the following MIL-STD-. 202 tests which are applicable. [See More]
- Category: Passive
- Package Type / Form Factor: Flatpack
- Divider / Combiner Type: 90º Hybrid
- Frequency: 59.00 to 69.00
from JFW Industries, Inc.
50C-053-XX is a 10dB resistive coupler. It couples in both directions. This model operates from DC to 3100 MHz and is rated for up to 5 Watts input power. RF path descriptions: IN/OUT to IN/OUT: insertion loss. IN/OUT to COUPLED PORT: coupled value. COUPLED PORT to IN/OUT: coupled value [See More]
- Category: Passive
- 0º Power Divider Division:: 2-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Connectorized
from Emhiser Research, Inc.
Features. <0.5 dB Amplitude Unbalance. Standard Relay Header. Low Cost [See More]
- Category: Passive
- Package Type / Form Factor: Flatpack
- Divider / Combiner Type: 90º Hybrid
- Frequency: 55.00 to 85.00
from Emhiser Research, Inc.
Features. <0.25 dB Amplitude Balance. 1 ° Phase Balance Typical. Small Footprint (0.1 in ²). Low Cost [See More]
- Category: Passive
- Package Type / Form Factor: Surface Mount
- Divider / Combiner Type: 90º Hybrid
- Frequency: 243.00 to 270.00
from Emhiser Research, Inc.
Reliability. All units are designed and constructed to meet or exceed. specifications after exposure to any or all of the following MIL-STD-. 202 tests which are applicable. [See More]
- Category: Passive
- Package Type / Form Factor: Surface Mount
- Divider / Combiner Type: 90º Hybrid
- Frequency: 59.00 to 69.00
from Emhiser Research, Inc.
Reliability. All units are designed and constructed to meet or exceed specifications after exposure to any or all of the following MIL-STD-202 tests which are applicable. [See More]
- Category: Passive
- 0º Power Divider Division:: 3-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Flatpack
from Emhiser Research, Inc.
Features. .8 dB Typical Midband Insertion Loss. 25 dB Typical Midband Isolation. 1.4:1 Typical Input VSWR [See More]
- Category: Passive
- 0º Power Divider Division:: 3-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Flatpack
from Emhiser Research, Inc.
Features. Low Cost. Reliable. Standard Relay Header [See More]
- Category: Passive
- 0º Power Divider Division:: 4-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Plugin
from Emhiser Research, Inc.
Reliability. All units are designed and constructed to meet or exceed specifications after exposure to any or all of the following MIL-STD-202 tests which are applicable. [See More]
- Category: Passive
- 0º Power Divider Division:: 8-Way
- Divider / Combiner Type: 0º
- Package Type / Form Factor: Plugin