4-Way RF Power Dividers and RF Power Combiners
from kTB Solutions
kTB Solutions supplies 4-way power dividers/combiners at frequencies from DC to 40GHz, and the power is up to 500W. Our 4-way power dividers/combiners are widely used in many areas. [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 0.00 to 1000.00
- Connectors: SMA; SMA
- Insertion Loss: 12.80
from 5o.com
Frequency Range 70 to 3800MHz. Built to the rigorous standards required for commercial implementations, military and space. Boasts a performance trio of low insertion loss, high isolation, and robust power handling. Custom design is available upon request. [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 136000.00 to 174000.00
- Connectors: SMA; Type N; N, SMA
- Insertion Loss: 0.80
from Werbel Microwave LLC
D-3182 is a legacy product. It has been replaced by WM3PD-2-18-S. It will be supported as long as needed. WM3PD-2-18-S is a wideband 3-way in-line power splitter covering a continuous bandwidth of 2 to 18 GHz in a compact enclosure measuring 2.25 x 1.00 x 0.38 inches. The device is RoHS compliant. A... [See More]
- 0º Power Divider Division:: 3-Way; 4-Way
- Frequency: 18000.00
- Package Type / Form Factor: Connectorized Module
from Knowles Precision Devices
(3 dB per split) incorporating our low loss, high permittivity dielectric materials to provide small size and temperature stability. The devices integrate thin film precision resistors and are offered for both solder surface mount (SMT) and chip and wire hybrid (WB) assembly applications. [See More]
- 0º Power Divider Division:: 4-Way
- Divider / Combiner Type: 0º
- Category: Passive
- Package Type / Form Factor: Surface Mount
from KRYTAR, Inc.
KRYTAR MLDD 4-way power dividers lend themselves to emerging wireless ultra-broadband designs and many test and measurement applications. KRYTAR has used its proprietary design to produce a wide assortment of matched-line directional dividers (MLDD) with ultra-high performance over a broadband... [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 4.00
- Frequency: 500.00 to 18000.00
- Isolation: 16.00
from Win Source Electronics
Alternative Parts (Cross-Reference): Cross. Manufacturer: Mini-Circuits. Category: RF and Wireless RF Power Dividers/Splitters. Package: Bulk. Product Status: Active. Insertion Loss: 0.6dB. Frequency: 0 Hz ~ 8.4 GHz. Specifications: Isolation (Typ) 6.4dB, 10 ° Imbalance (Max). Size / Dimension:... [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 0.60
- Frequency: 0.00
from Richardson RFPD
Richardson RFPD, an Arrow Company, is a specialized electronic component distributor providing design engineers with deep technical expertise and localized global design support for the latest new products from the world's leading suppliers of RF, Wireless, Energy and Power Technologies. [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 50.00 to 1100.00
- Package Type / Form Factor: PQFN
from DigiKey
2.92 MM, 4-WAY POWER DIVIDER, 25 [See More]
- 0º Power Divider Division:: 4-Way
- Isolation: 15.00
- Package Type / Form Factor: Module
from 5o.com
Up 20GHz. Built to the rigorous standards required for commercial implementations, military and space. Boasts a performance trio of low insertion loss, high isolation, and robust power handling. Custom design is available upon request. [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 350000.00 to 520000.00
- Connectors: Type N; N
- Operating Temperature: -30 to 75
from Werbel Microwave LLC
D-4182. Power Divider, 4-way, 2-18GHz, SMA Female [See More]
- 0º Power Divider Division:: 4-Way
- Connectors: SMA
- Package Type / Form Factor: Connectorized Module
- Frequency: 2000.00 to 18000.00
from KRYTAR, Inc.
KRYTAR MLDD 4-way power dividers lend themselves to emerging wireless ultra-broadband designs and many test and measurement applications. KRYTAR has used its proprietary design to produce a wide assortment of matched-line directional dividers (MLDD) with ultra-high performance over a broadband... [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 4.30
- Frequency: 500.00 to 26500.00
- Isolation: 16.00
from Richardson RFPD
Richardson RFPD, an Arrow Company, is a specialized electronic component distributor providing design engineers with deep technical expertise and localized global design support for the latest new products from the world's leading suppliers of RF, Wireless, Energy and Power Technologies. [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 50.00 to 1100.00
- Package Type / Form Factor: PQFN
from DigiKey
RF Power Divider 6GHz ~ 40GHz Isolation (Min) 13dB Module [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 2.60
- Package Type / Form Factor: Module
- Isolation: 13.00
from 5o.com
Up 20GHz. Built to the rigorous standards required for commercial implementations, military and space. Boasts a performance trio of low insertion loss, high isolation, and robust power handling. Custom design is available upon request. [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 9.50
- Frequency: 136000.00 to 174000.00
from Werbel Microwave LLC
D-4184. Power Divider, 4-way, 4-18GHz, SMA Female [See More]
- 0º Power Divider Division:: 4-Way
- Connectors: SMA
- Package Type / Form Factor: Connectorized Module
- Frequency: 4000.00 to 18000.00
from KRYTAR, Inc.
KRYTAR MLDD 4-way power dividers lend themselves to emerging wireless ultra-broadband designs and many test and measurement applications. KRYTAR has used its proprietary design to produce a wide assortment of matched-line directional dividers (MLDD) with ultra-high performance over a broadband... [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 3.00
- Frequency: 1000.00 to 18000.00
- Isolation: 16.00
from Richardson RFPD
These four-way in-phase power dividers combine excellent strip transmission line design techniques with small size and light weight and still achieve superb performance over wide multi-octave frequency ranges as well as over single octave bandwidths. These units may be used in reverse to combine... [See More]
- 0º Power Divider Division:: 4-Way
- Connectors: SMA
- Package Type / Form Factor: Connectorized; Connectorized - SMA Female
- Frequency: 2000.00
from DigiKey
RF Power Divider 1GHz ~ 2GHz Isolation (Min) 20dB, 1.35 VSWR (Max), 6 ° Imbalance (Max) Module, SMA Connectors [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 0.50
- Package Type / Form Factor: Module, SMA Connectors
- Isolation: 20.00
from 5o.com
Up 20GHz. Built to the rigorous standards required for commercial implementations, military and space. Boasts a performance trio of low insertion loss, high isolation, and robust power handling. Custom design is available upon request. [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 100000.00 to 200000.00
- Connectors: Type N; N
- Insertion Loss: 7.50
from Werbel Microwave LLC
D-4185 is a legacy product. It has been replaced by WM4PD-0.5-18-S. It will be supported as long as it is needed. WM4PD-0.5-18-S is a wideband 4-way in-line power splitter covering 500 MHz to 18 GHz with excellent return loss, low insertion loss, and high isolation performance. The device covers... [See More]
- 0º Power Divider Division:: 4-Way
- Connectors: SMA; UHF
- Package Type / Form Factor: Connectorized Module
- Frequency: 500.00 to 18000.00
from KRYTAR, Inc.
KRYTAR MLDD 4-way power dividers lend themselves to emerging wireless ultra-broadband designs and many test and measurement applications. KRYTAR has used its proprietary design to produce a wide assortment of matched-line directional dividers (MLDD) with ultra-high performance over a broadband... [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 3.30
- Frequency: 1000.00 to 26500.00
- Isolation: 16.00
from Richardson RFPD
Richardson RFPD, an Arrow Company, is a specialized electronic component distributor providing design engineers with deep technical expertise and localized global design support for the latest new products from the world's leading suppliers of RF, Wireless, Energy and Power Technologies. [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 700.00 to 6000.00
- Package Type / Form Factor: Connectorized; Connectorized
- Insertion Loss: 1.10
from DigiKey
RF Power Divider 10MHz ~ 500MHz Isolation (Min) 25dB, 1.5 VSWR (Max), 5 ° Imbalance (Max) FP-5 [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 0.85
- Package Type / Form Factor: FP-5
- Isolation: 25.00
from Werbel Microwave LLC
WM3PD-2-18-S is a wideband 3-way in-line power splitter covering a continuous bandwidth of 2 to 18 GHz in a compact enclosure measuring 2.25 x 1.00 x 0.38 inches. The device is RoHS compliant. A proven product in regular production since 2016. This is a “true ” three-way split; not an... [See More]
- 0º Power Divider Division:: 3-Way; 4-Way
- Frequency: 18000.00
- Package Type / Form Factor: Connectorized Module
from KRYTAR, Inc.
KRYTAR MLDD 4-way power dividers lend themselves to emerging wireless ultra-broadband designs and many test and measurement applications. KRYTAR has used its proprietary design to produce a wide assortment of matched-line directional dividers (MLDD) with ultra-high performance over a broadband... [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 6.50
- Frequency: 1000.00 to 40000.00
- Isolation: 11.00
from DigiKey
RF Power Divider 200kHz ~ 300MHz Isolation (Min) 25dB, 2 VSWR (Max), 6 ° Imbalance (Max) FP-5 [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 1.00
- Package Type / Form Factor: FP-5
- Isolation: 25.00
from Werbel Microwave LLC
WM4PD-0.4-4-B is a 4-way power splitter covering the continuous bandwidth of 400 MHz to 4 GHz (replacing previous model that operated from 700MHz). It has low insertion loss and excellent VSWR performance. The device is RoHS compliant. Our unique design approach allows for broadband response using... [See More]
- 0º Power Divider Division:: 4-Way
- Connectors: BNC
- Package Type / Form Factor: Connectorized Module
- Frequency: 400.00 to 4000.00
from KRYTAR, Inc.
KRYTAR MLDD 4-way power dividers lend themselves to emerging wireless ultra-broadband designs and many test and measurement applications. KRYTAR has used its proprietary design to produce a wide assortment of matched-line directional dividers (MLDD) with ultra-high performance over a broadband... [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 6.50
- Frequency: 1000.00 to 40000.00
- Isolation: 11.00
from DigiKey
RF Power Divider 25MHz ~ 1GHz Isolation (Min) 20dB, 1.4 VSWR (Max), 6 ° Imbalance (Max) FP-5 [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 1.00
- Package Type / Form Factor: FP-5
- Isolation: 20.00
from Werbel Microwave LLC
WM4PD-0.5-18-S is a wideband 4-way in-line power splitter covering 500 MHz to 18 GHz with excellent return loss, low insertion loss, and high isolation performance. The device covers several military radios letter octave bands in one product, delivering much value to the program. The device is RoHS... [See More]
- 0º Power Divider Division:: 4-Way
- Connectors: SMA; UHF
- Package Type / Form Factor: Connectorized Module
- Frequency: 500.00 to 18000.00
from KRYTAR, Inc.
KRYTAR MLDD 4-way power dividers lend themselves to emerging wireless ultra-broadband designs and many test and measurement applications. KRYTAR has used its proprietary design to produce a wide assortment of matched-line directional dividers (MLDD) with ultra-high performance over a broadband... [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 2.00
- Frequency: 2000.00 to 18000.00
- Isolation: 16.00
from DigiKey
6-18GHZ 4-WAY SMD WILKINSON POWE [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 1.00
- Package Type / Form Factor: SMD
- Isolation: 14.00
from Werbel Microwave LLC
Model WM4PD-0.5-26-S from Werbel Microwave is a wideband 4-way in-line power splitter covering of 500 MHz to 26.5 GHz with excellent return loss, low insertion loss, and high isolation performance. The product is a new offering of the 26.5GHz series offered by Werbel Microwave. Precision assembled,... [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 500.00 to 26500.00
- Package Type / Form Factor: Connectorized Module
from KRYTAR, Inc.
KRYTAR MLDD 4-way power dividers lend themselves to emerging wireless ultra-broadband designs and many test and measurement applications. KRYTAR has used its proprietary design to produce a wide assortment of matched-line directional dividers (MLDD) with ultra-high performance over a broadband... [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 2.30
- Frequency: 2000.00 to 26500.00
- Isolation: 16.00
from DigiKey
11.2GHZ 4-WAY WILKINSON POWER DI [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 0.60
- Package Type / Form Factor: 5-SMD, No Lead
- Isolation: 12.00
from Werbel Microwave LLC
WM4PD-0.5-6-S is a wideband 4-way in-line power splitter covering of 0.5 to 6 GHz with excellent return loss, low insertion loss, and high isolation performance. It is a very versatile product that covers the upper UHF band, cellular and PCS testing measurement applications as well as L, S, and the... [See More]
- 0º Power Divider Division:: 4-Way
- Connectors: UHF
- Package Type / Form Factor: Connectorized Module
- Frequency: 6000.00
from KRYTAR, Inc.
KRYTAR MLDD 4-way power dividers lend themselves to emerging wireless ultra-broadband designs and many test and measurement applications. KRYTAR has used its proprietary design to produce a wide assortment of matched-line directional dividers (MLDD) with ultra-high performance over a broadband... [See More]
- 0º Power Divider Division:: 4-Way
- Isolation: 13.00
- Frequency: 3000.00 to 40000.00
from DigiKey
5.6GHZ 4-WAY WILKINSON POWER DIV [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 0.70
- Package Type / Form Factor: 5-SMD, No Lead
- Isolation: 12.00
from Werbel Microwave LLC
WM4PD-0.5-6-S1 is a 4-way power splitter covering the continuous bandwidth of 500 MHz to 6 GHz in an enclosure measuring 3.48 x 3.48 x 0.55 inches. The configuration is unique in that the input and output are on the same side, which allows for front panel mounting in rack systems, and internally... [See More]
- 0º Power Divider Division:: 4-Way
- Connectors: SMA; UHF
- Package Type / Form Factor: Connectorized Module
- Frequency: 500.00 to 6000.00
from KRYTAR, Inc.
KRYTAR MLDD 4-way power dividers lend themselves to emerging wireless ultra-broadband designs and many test and measurement applications. KRYTAR has used its proprietary design to produce a wide assortment of matched-line directional dividers (MLDD) with ultra-high performance over a broadband... [See More]
- 0º Power Divider Division:: 4-Way
- Isolation: 13.00
- Frequency: 3000.00 to 40000.00
from DigiKey
4 WAYS PWR SPLTR, 2.4 - 2.5 GHZ [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 0.10
- Package Type / Form Factor: Module
from Werbel Microwave LLC
WM4PD-0.6-7.4-S1 is a 4-way power splitter covering a continuous bandwidth of 600 MHz to 7.4 GHz in an enclosure measuring 3.48 x 3.23 x 0.55 inches. The configuration is unique in that the input and output are on the same side, which allows for front panel mounting in rack systems, and internally... [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 600.00 to 7125.00
- Package Type / Form Factor: Connectorized Module
from KRYTAR, Inc.
KRYTAR MLDD 4-way power dividers lend themselves to emerging wireless ultra-broadband designs and many test and measurement applications including emerging mmWave and 6G markets. KRYTAR has used its proprietary design to produce a wide assortment of matched-line directional dividers (MLDD) with... [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 2.40
- Frequency: 7000.00 to 24000.00
- Isolation: 16.00
from DigiKey
4 WAYS PWRSPLTR, 0.1 - 200 MHZ [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 0.70
- Package Type / Form Factor: 8-DIP Module
- Isolation: 20.00
from Werbel Microwave LLC
4-way 1-26.5GHz Made in the USA. [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 1000.00 to 26500.00
- Package Type / Form Factor: Connectorized Module
from KRYTAR, Inc.
KRYTAR MLDD 4-way power dividers lend themselves to emerging wireless ultra-broadband designs and many test and measurement applications including emerging mmWave and 6G markets. KRYTAR has used its proprietary design to produce a wide assortment of matched-line directional dividers (MLDD) with... [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 1.90
- Frequency: 7125.00 to 15350.00
- Isolation: 18.00
from DigiKey
4 WAYS C&W PS, 1 - 650 MHZ, 50 [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 1.40
- Package Type / Form Factor: 8-SMD, No Lead
- Isolation: 21.00
from Werbel Microwave LLC
4-way 18-26.5GHz Made in the USA. [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 18000.00 to 26500.00
- Package Type / Form Factor: Connectorized Module
from DigiKey
4 WAYS PWRSPLTR, 720 - 1125 MHZ [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 0.70
- Package Type / Form Factor: 12-VQFN Exposed Pad
- Isolation: 15.00
from Werbel Microwave LLC
The WM4PD-18-40-K from Werbel Microwave is a 4-way power divider operating across 18 to 40 GHz, featuring 2.92 mm female connectors and a 50-ohm impedance. It provides a minimum return loss of 12.7 dB (1.6:1 VSWR) at all ports, with insertion loss above the theoretical 6 dB split ranging from 1.5 to... [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 40000.00
- Package Type / Form Factor: Connectorized Module
from DigiKey
4 WAYS DC PPS, 380-4600 MHZ, 50 [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 1.30
- Package Type / Form Factor: Module, SMA Connectors
- Isolation: 16.00
from Werbel Microwave LLC
WM4PD-2-18-S is a wideband 4-way in-line power splitter covering the continuous bandwidth of 2 to 18 GHz in an aluminum enclosure measuring 4.00 x 2.50 x 0.38 inches. This covers several of the octave letter bands used by the military including S, C, X and Ku bands. The device is RoHS compliant,... [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 18000.00
- Package Type / Form Factor: Connectorized Module
from DigiKey
4 WAYS DC PASS PS, 380-4600 MHZ [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 1.30
- Package Type / Form Factor: Module, SMA Connectors
- Isolation: 16.00
from Werbel Microwave LLC
Werbel Microwave WM4PD-2-18.5-S is a 4-way zero-degrees ultra-wideband splitter and combiner supporting a wide range of applications. Low insertion loss, good power handling 30W as a splitter. Connectors are stainless steel for durability. Our own unique design maximizes bandwidth in a small size. [See More]
- 0º Power Divider Division:: 4-Way
- Package Type / Form Factor: Connectorized Module
from DigiKey
4 WAYS PWRSPLTR, 5-500 MHZ, 50 [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 0.90
- Package Type / Form Factor: Module
- Isolation: 20.00
from Werbel Microwave LLC
Model WM4PD-2-26.5-S from Werbel Microwave is a wideband 4-way in-line power splitter covering of 2 to 26.5 GHz with excellent return loss, low insertion loss, and high isolation performance. Our own design of the new 26.5GHz series, precision-assembled and tested in the USA. Isolation 19dB typical. [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 26500.00
- Package Type / Form Factor: Connectorized Module
from DigiKey
4 WAYS PWRSPLTR, 5-500 MHZ, 50 [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 0.90
- Package Type / Form Factor: Module
- Isolation: 20.00
from Werbel Microwave LLC
WM4PD-4-18-S is a 4-way in-line power splitter covering the continuous bandwidth of 4 to 18 GHz in a compact enclosure measuring 1.98 x 1.46 x 0.38 inches. The device is RoHS compliant. There exist two through mounting holes for top-down bolting to a chassis. The SMA female connectors are stainless... [See More]
- 0º Power Divider Division:: 4-Way
- Connectors: SMA
- Package Type / Form Factor: Connectorized Module
- Frequency: 18000.00
from DigiKey
4 WAYS DC PASS PS, 2000-26500MHZ [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 2.20
- Package Type / Form Factor: Module, SMA Connectors
- Isolation: 18.00
from Werbel Microwave LLC
4-way 6-26.5GHz Made in the USA. [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 6000.00 to 26500.00
- Package Type / Form Factor: Connectorized Module
from DigiKey
4 WAYS STRIPLINE DC PPS [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 1.10
- Package Type / Form Factor: Module, SMA Connectors
- Isolation: 18.00
from DigiKey
4 WAY PWRSPLTR 1.85 MM CONNECTOR [See More]
- 0º Power Divider Division:: 4-Way
- Insertion Loss: 2.70
- Package Type / Form Factor: Module
- Isolation: 16.00
from R.A. Miller Industries, Inc.
The AV-585 antenna is a diplexer/splitter providing (2) VOR/ LOC and (2) GS outputs from one VOR/LOC/GC antenna. It is a direct replacement for the CI 1125. [See More]
- 0º Power Divider Division:: 4-Way
- Package Type / Form Factor: Connectorized
- Divider / Combiner Type: 0º
- Connectors: BNC
from Temwell Corporation / Temstron Co., Ltd.
Low pass splitter, available in stock, delivery in 72 hours [See More]
- 0º Power Divider Division:: 4-Way
- Divider / Combiner Type: 0º
- Category: Passive
- Package Type / Form Factor: Connectorized
from Rohde & Schwarz USA, Inc.
Optimized HF and VHF/UHF modules for best possible receiving conditions. To create ideal receiving conditions, two multicoupler modules have been developed for the R &S ®ASDU02. The HF module covers the 10 kHz to 30 MHz band, the VHF/UHF module covers the 20 MHz to 3 GHz band. 1-to-4... [See More]
- 0º Power Divider Division:: 4-Way
- Divider / Combiner Type: 0º
- Category: Active
- Package Type / Form Factor: Rack mount unit
from JFW Industries, Inc.
Characteristics of Resistive Power Divider/Combiner. Resistive power dividers/combiners function all the way down to DC. Resistive Power dividers/combiners can be used to combine several signals or split a single signal. Due to their symmetric design, the isolation of a resistive divider/combiner is... [See More]
- 0º Power Divider Division:: 4-Way
- Package Type / Form Factor: Connectorized
- Category: Passive
- Connectors: SMA; Type N
from Pulsar Microwave Corporation
RoHS compliant, Custom frequency bands &optimized specifications available [See More]
- 0º Power Divider Division:: 4-Way
- Divider / Combiner Type: 0º
- Category: Passive
- Frequency: 100.00 to 700.00
from Fairview Microwave Inc.
Fairview Microwave is a leading provider of high-quality RF and microwave components including adapters, connectors, attenuators, coaxial cables, terminations, and much more. Specializing in immediate product needs, we offer same-day shipping on thousands of in-stock items with no minimum purchasing... [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 2000.00 to 6000.00
- Divider / Combiner Type: 0º
from Emhiser Research, Inc.
Applications. These Dividers where designed for cell site applications where Tele-Tech ’s proprietary processes guarantee low loss, high isolation, and uniform part-to-part performance. In addition Tele-Tech ’s plating process insures years of high performance under the worst... [See More]
- 0º Power Divider Division:: 4-Way
- Divider / Combiner Type: 0º
- Category: Passive
- Package Type / Form Factor: Connectorized
from Comtelco Industries, Inc.
4-PORT OR QUAD COUPLER STACKER, 800-970MHz FEMALE "N" TERMINATIONS [See More]
- 0º Power Divider Division:: 4-Way
- Divider / Combiner Type: 0º; Wide Band Coupler/Stacker
- Category: Passive
- Package Type / Form Factor: Connectorized
from Spectrum Microwave
Designed to Meet MIL-E-5400 Class 3, SMA Female Connectors per MIL-PRF-39012, High Isolation Wilkinson Circuit Design [See More]
- 0º Power Divider Division:: 4-Way
- Divider / Combiner Type: 0º
- Category: Passive
- Package Type / Form Factor: Connectorized
from ZTS Technologies Co., Ltd
4 Way Signal Splitter Distribution System is a rack-mounted 1U, contains several units of 4-Way power dividers, input and output ports are on the same panel. [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 500.00 to 6000.00
- Connectors: SMA
- Insertion Loss: 2.00
from Picosecond Pulse Labs, Inc.
Features. DC to >25GHz bandwidth. 12dB (4x) Insertion Loss. Excellent Return Loss. Accurate Amplitude and Phase Tracking. Applications. Data and Telecom Systems. Laboratory T &M. RF and Microwave. The Picosecond Advantage: A power divider design with excellent transient response, repeatable... [See More]
- 0º Power Divider Division:: 4-Way
- Package Type / Form Factor: Connectorized
- Category: Passive
- Connectors: SMA
from Temwell Corporation / Temstron Co., Ltd.
Low pass splitter, available in stock, delivery in 72 hours [See More]
- 0º Power Divider Division:: 4-Way
- Divider / Combiner Type: 0º
- Category: Passive
- Package Type / Form Factor: Connectorized
from JFW Industries, Inc.
Characteristics of Resistive Power Divider/Combiner. Resistive power dividers/combiners function all the way down to DC. Resistive Power dividers/combiners can be used to combine several signals or split a single signal. Due to their symmetric design, the isolation of a resistive divider/combiner is... [See More]
- 0º Power Divider Division:: 4-Way
- Package Type / Form Factor: Connectorized
- Category: Passive
- Connectors: BNC; SMA; TNC; Type N
from Fairview Microwave Inc.
Fairview Microwave is a leading provider of high-quality RF and microwave components including adapters, connectors, attenuators, coaxial cables, terminations, and much more. Specializing in immediate product needs, we offer same-day shipping on thousands of in-stock items with no minimum purchasing... [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 20.00 to 1000.00
- Divider / Combiner Type: 0º
from Emhiser Research, Inc.
Reliability. All units are designed and constructed to meet or exceed specifications after exposure to any or all of the following MIL-STD-202 tests which are applicable. [See More]
- 0º Power Divider Division:: 4-Way
- Divider / Combiner Type: 0º
- Category: Passive
- Frequency: 0.30 to 600.00
from ZTS Technologies Co., Ltd
ZTS offers 50 Ohms 4 Way Power dividers/combiners that ultra wide band, wide band/narrow band, Wilkinson type, part of our models are displayed below, please contact us for more models or custom design if you cannot find what you need here. Application. Test & Measurement. Military... [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 300.00 to 18000.00
- Connectors: SMA
- Insertion Loss: 6.00
from Temwell Corporation / Temstron Co., Ltd.
Temwell extends service to all kinds of RF & Microwave components design and manufacture. Temstron is authorized to provide RF solutions in the field of Wireless Communications to steadily supply several markets such as Aerospace, Military, Medicals, etc. [See More]
- 0º Power Divider Division:: 4-Way
- Divider / Combiner Type: 0º
- Category: Passive
- Package Type / Form Factor: Connectorized
from JFW Industries, Inc.
Characteristics of Resistive Power Divider/Combiner. Resistive power dividers/combiners function all the way down to DC. Resistive Power dividers/combiners can be used to combine several signals or split a single signal. Due to their symmetric design, the isolation of a resistive divider/combiner is... [See More]
- 0º Power Divider Division:: 4-Way
- Package Type / Form Factor: Connectorized
- Category: Passive
- Connectors: SMA
from Fairview Microwave Inc.
Fairview Microwave is a leading provider of high-quality RF and microwave components including adapters, connectors, attenuators, coaxial cables, terminations, and much more. Specializing in immediate product needs, we offer same-day shipping on thousands of in-stock items with no minimum purchasing... [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 80.00 to 1000.00
- Divider / Combiner Type: 0º
from Emhiser Research, Inc.
Features. Low Cost. Reliable. Standard Relay Header [See More]
- 0º Power Divider Division:: 4-Way
- Divider / Combiner Type: 0º
- Category: Passive
- Package Type / Form Factor: Plugin
from ZTS Technologies Co., Ltd
ZTS offers 50 Ohms 4 Way Power dividers/combiners that ultra wide band, wide band/narrow band, Wilkinson type, part of our models are displayed below, please contact us for more models or custom design if you cannot find what you need here. Application. Test & Measurement. Military... [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 500.00 to 18000.00
- Connectors: SMA
- Insertion Loss: 4.00
from JFW Industries, Inc.
Characteristics of Resistive Power Divider/Combiner. Resistive power dividers/combiners function all the way down to DC. Resistive Power dividers/combiners can be used to combine several signals or split a single signal. Due to their symmetric design, the isolation of a resistive divider/combiner is... [See More]
- 0º Power Divider Division:: 4-Way
- Package Type / Form Factor: Connectorized
- Category: Passive
- Connectors: Type F; Type N
from Fairview Microwave Inc.
Fairview Microwave is a leading provider of high-quality RF and microwave components including adapters, connectors, attenuators, coaxial cables, terminations, and much more. Specializing in immediate product needs, we offer same-day shipping on thousands of in-stock items with no minimum purchasing... [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 800.00 to 2500.00
- Divider / Combiner Type: 0º
from Emhiser Research, Inc.
Features. Low Cost. Surface Mount. <0.25 dB Midband Loss. Excellent Balance [See More]
- 0º Power Divider Division:: 4-Way
- Divider / Combiner Type: 0º
- Category: Passive
- Package Type / Form Factor: Surface Mount
from ZTS Technologies Co., Ltd
ZTS offers 50 Ohms 4 Way Power dividers/combiners that ultra wide band, wide band/narrow band, Wilkinson type, part of our models are displayed below, please contact us for more models or custom design if you cannot find what you need here. Application. Test & Measurement. Military... [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 500.00 to 6000.00
- Connectors: SMA
- Insertion Loss: 2.00
from JFW Industries, Inc.
Characteristics of Resistive Power Divider/Combiner. Resistive power dividers/combiners function all the way down to DC. Resistive Power dividers/combiners can be used to combine several signals or split a single signal. Due to their symmetric design, the isolation of a resistive divider/combiner is... [See More]
- 0º Power Divider Division:: 4-Way
- Package Type / Form Factor: Connectorized
- Category: Passive
- Connectors: BNC; Type N
from Fairview Microwave Inc.
Fairview Microwave is a leading provider of high-quality RF and microwave components including adapters, connectors, attenuators, coaxial cables, terminations, and much more. Specializing in immediate product needs, we offer same-day shipping on thousands of in-stock items with no minimum purchasing... [See More]
- 0º Power Divider Division:: 4-Way
- Connectors: SMA
- Divider / Combiner Type: 0º
- Frequency: 1000.00 to 6000.00
from Emhiser Research, Inc.
Features. Fully Hermetic Package. Surface Mount. Excellent Balance [See More]
- 0º Power Divider Division:: 4-Way
- Divider / Combiner Type: 0º
- Category: Passive
- Package Type / Form Factor: Surface Mount
from ZTS Technologies Co., Ltd
ZTS offers 50 Ohms 4 Way Power dividers/combiners that ultra wide band, wide band/narrow band, Wilkinson type, part of our models are displayed below, please contact us for more models or custom design if you cannot find what you need here. Application. Test & Measurement. Military... [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 1000.00 to 18000.00
- Connectors: SMA
- Insertion Loss: 2.50
from JFW Industries, Inc.
Power divider/combiner assemblies are typically used with custom RF test equipment. If you have a specific application for a power divider/combiner assembly, please send us a block diagram of your requirement. JFW does not change NRE's for new power divider combiner assembly models. We pride... [See More]
- 0º Power Divider Division:: 4-Way
- Package Type / Form Factor: Connectorized
- Category: Passive
- Connectors: Type N
from Fairview Microwave Inc.
Fairview Microwave is a leading provider of high-quality RF and microwave components including adapters, connectors, attenuators, coaxial cables, terminations, and much more. Specializing in immediate product needs, we offer same-day shipping on thousands of in-stock items with no minimum purchasing... [See More]
- 0º Power Divider Division:: 4-Way
- Connectors: SMA
- Divider / Combiner Type: 0º
- Frequency: 2000.00 to 6000.00
from ZTS Technologies Co., Ltd
ZTS offers 50 Ohms 4 Way Power dividers/combiners that ultra wide band, wide band/narrow band, Wilkinson type, part of our models are displayed below, please contact us for more models or custom design if you cannot find what you need here. Application. Test & Measurement. Military... [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 18000.00 to 26500.00
- Connectors: SMA
- Insertion Loss: 1.50
from JFW Industries, Inc.
Model 50PD-837 N is a 50 Ohm reactive 4-Way power divider/combiner that operates 400-6000 MHz. It uses a reactive Wilkinson splitter design which is ideal when the application is to fan-in or fan-out RF signals with minimum loss. It is only available with N female coaxial RF connectors. It has one... [See More]
- 0º Power Divider Division:: 4-Way
- Divider / Combiner Type: 0º
- Category: Passive
- Package Type / Form Factor: Connectorized
from Fairview Microwave Inc.
Fairview Microwave is a leading provider of high-quality RF and microwave components including adapters, connectors, attenuators, coaxial cables, terminations, and much more. Specializing in immediate product needs, we offer same-day shipping on thousands of in-stock items with no minimum purchasing... [See More]
- 0º Power Divider Division:: 4-Way
- Connectors: SMA
- Divider / Combiner Type: 0º
- Frequency: 20.00 to 1000.00
from ZTS Technologies Co., Ltd
ZTS offers 50 Ohms 4 Way Power dividers/combiners that ultra wide band, wide band/narrow band, Wilkinson type, part of our models are displayed below, please contact us for more models or custom design if you cannot find what you need here. Application. Test & Measurement. Military... [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 2000.00 to 18000.00
- Connectors: SMA
- Insertion Loss: 1.20
from JFW Industries, Inc.
Model 50PD-847 SMA is a 50 Ohm reactive 4-Way power divider/combiner that operates 350-6000 MHz. It uses a reactive Wilkinson splitter design which is ideal when the application is to fan-in or fan-out RF signals with minimum loss. It is only available with SMA female coaxial RF connectors. It has... [See More]
- 0º Power Divider Division:: 4-Way
- Divider / Combiner Type: 0º
- Category: Passive
- Package Type / Form Factor: Connectorized
from Fairview Microwave Inc.
Fairview Microwave is a leading provider of high-quality RF and microwave components including adapters, connectors, attenuators, coaxial cables, terminations, and much more. Specializing in immediate product needs, we offer same-day shipping on thousands of in-stock items with no minimum purchasing... [See More]
- 0º Power Divider Division:: 4-Way
- Connectors: SMA
- Divider / Combiner Type: 0º
- Frequency: 80.00 to 1000.00
from ZTS Technologies Co., Ltd
ZTS offers 50 Ohms 4 Way Power dividers/combiners that ultra wide band, wide band/narrow band, Wilkinson type, part of our models are displayed below, please contact us for more models or custom design if you cannot find what you need here. Application. Test & Measurement. Military... [See More]
- 0º Power Divider Division:: 4-Way
- Frequency: 6000.00 to 18000.00
- Connectors: SMA
- Insertion Loss: 1.30
from Fairview Microwave Inc.
Fairview Microwave is a leading provider of high-quality RF and microwave components including adapters, connectors, attenuators, coaxial cables, terminations, and much more. Specializing in immediate product needs, we offer same-day shipping on thousands of in-stock items with no minimum purchasing... [See More]
- 0º Power Divider Division:: 4-Way
- Connectors: SMA
- Divider / Combiner Type: 0º
- Frequency: 800.00 to 4200.00
from Fairview Microwave Inc.
RF power divider part number FMDV1069 is only one product of a wide selection of coax splitter components we supply. This Fairview Microwave power divider / splitter design is a 4 way with 2.92mm connectors. Our 4 way RF power divider is rated for a minimum frequency of 18 GHz and a maximum... [See More]
- 0º Power Divider Division:: 4-Way
- Connectors: 2.92mm
- Divider / Combiner Type: 0º
- Frequency: 18000.00 to 40000.00
from Fairview Microwave Inc.
RF power divider part number FMDV1068 is only one product of a wide selection of coax splitter components we supply. This Fairview Microwave power divider / splitter design is a 4 way with 2.92mm connectors. Our 4 way RF power divider is rated for a minimum frequency of 6 GHz and a maximum frequency... [See More]
- 0º Power Divider Division:: 4-Way
- Connectors: 2.92mm
- Divider / Combiner Type: 0º
- Frequency: 6000.00 to 40000.00
from Fairview Microwave Inc.
RF power divider part number SMP8756 is only one product of a wide selection of coax splitter components we supply. This Fairview Microwave power divider / splitter design is a 4 way with N connectors. Our 4 way RF power divider is rated for a minimum frequency of 698 MHz and a maximum frequency of... [See More]
- 0º Power Divider Division:: 4-Way
- Connectors: Type N
- Divider / Combiner Type: 0º
- Frequency: 698.00 to 2700.00
from Fairview Microwave Inc.
RF power divider part number SMP8755 is only one product of a wide selection of coax splitter components we supply. This Fairview Microwave power divider / splitter design is a 4 way with N connectors. Our 4 way RF power divider is rated for a minimum frequency of 800 MHz and a maximum frequency of... [See More]
- 0º Power Divider Division:: 4-Way
- Connectors: Type N
- Divider / Combiner Type: 0º
- Frequency: 800.00 to 2500.00
from Fairview Microwave Inc.
RF power divider part number MP8758-4 is only one product of a wide selection of coax splitter components we supply. This Fairview Microwave power divider / splitter design is a 4 way with N connectors. Our 4 way RF power divider is rated for a minimum frequency of 800 MHz and a maximum frequency of... [See More]
- 0º Power Divider Division:: 4-Way
- Connectors: Type N
- Divider / Combiner Type: 0º
- Frequency: 800.00 to 2500.00
from Fairview Microwave Inc.
RF power divider part number FMDV1051 is only one product of a wide selection of coax splitter components we supply. This Fairview Microwave power divider / splitter design is a 4 way with N connectors. Our 4 way RF power divider is rated for a minimum frequency of 1 GHz and a maximum frequency of 4... [See More]
- 0º Power Divider Division:: 4-Way
- Connectors: Type N
- Divider / Combiner Type: 0º
- Frequency: 1000.00 to 4000.00
from Fairview Microwave Inc.
RF power divider part number FMDV1050 is only one product of a wide selection of coax splitter components we supply. This Fairview Microwave power divider / splitter design is a 4 way with N connectors. Our 4 way RF power divider is rated for a minimum frequency of 375 MHz and a maximum frequency of... [See More]
- 0º Power Divider Division:: 4-Way
- Connectors: Type N
- Divider / Combiner Type: 0º
- Frequency: 375.00 to 6000.00
from Fairview Microwave Inc.
RF power divider part number FMDV1036A is only one product of a wide selection of coax splitter components we supply. This Fairview Microwave power divider / splitter design is a 4 way with N connectors. Our 4 way RF power divider is rated for a minimum frequency of 698 MHz and a maximum frequency... [See More]
- 0º Power Divider Division:: 4-Way
- Connectors: Type N
- Divider / Combiner Type: 0º
- Frequency: 698.00 to 2700.00
from Fairview Microwave Inc.
RF power divider part number MP8413-4 is only one product of a wide selection of coax splitter components we supply. This Fairview Microwave power divider / splitter design is a 4 way with SMA connectors. Our 4 way RF power divider is rated for a minimum frequency of 1 GHz and a maximum frequency of... [See More]
- 0º Power Divider Division:: 4-Way
- Connectors: SMA
- Divider / Combiner Type: 0º
- Frequency: 1000.00 to 2000.00
from Fairview Microwave Inc.
RF power divider part number MP0218-4 is only one product of a wide selection of coax splitter components we supply. This Fairview Microwave power divider / splitter design is a 4 way with SMA connectors. Our 4 way RF power divider is rated for a minimum frequency of 2 GHz and a maximum frequency of... [See More]
- 0º Power Divider Division:: 4-Way
- Connectors: SMA
- Divider / Combiner Type: 0º
- Frequency: 2000.00 to 18000.00
from Fairview Microwave Inc.
RF power divider part number MP8426-4 is only one product of a wide selection of coax splitter components we supply. This Fairview Microwave power divider / splitter design is a 4 way with SMA connectors. Our 4 way RF power divider is rated for a minimum frequency of 2 GHz and a maximum frequency of... [See More]
- 0º Power Divider Division:: 4-Way
- Connectors: SMA
- Divider / Combiner Type: 0º
- Frequency: 2000.00 to 4000.00