Aluminum Industrial Heaters
from Backer Hotwatt Inc.
Applications. Battery Warmers, Cabinets, Defrost Applications, Heated Food Tables, lncubators, Laboratory Equipment, Ceiling Panels, and Wall Panels. Features. The Hotwatt Foil Heater is a self contained one-piece assembly. A resistant element is laminated between two layers of aluminum foil. The... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Specialty Industrial Heaters; Insulated wire element inside an aluminum foil covering.
- Maximum Operating Temperature: 300
from Thermon, Inc
Unit Heater Ruffneck ™ AH Series Advanced Horizontal Unit Heaters are designed for rugged industrial applications and can be used with a variety of heat transfer fluids such as steam, circulating hot water, and glycol heating systems or in liquid cooling applications, including flash stream... [See More]
- Sleeve (Sheath) Material: Aluminum; Steel
- Fuel / Energy Source: Water/Steam
from Tempco Electric Heater Corporation
As a standard, Cast-In Band Heaters are manufactured in aluminum alloys because this material provides very good thermal conductive properties. For applications requiring higher operating temperatures and/or higher watt densities, bronze or brass alloys can be used. [See More]
- Sleeve (Sheath) Material: Aluminum; Brass; Bronze
- Fuel / Energy Source: Electric
- Heater Type: Band Heater; Cast-In Heater
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
from WATTCO
Designed for use in hazardous areas with explosion-resistant cast aluminum terminal enclosure and redundant over temperature protection. Sized to fit the duct. Heavy wall, large diameter finned tubular elements, individually removable for servicing. Tubular and finned designs can provide outlet air... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Duct Heater; Explosion-proof Heater
- Maximum Operating Temperature: 1200
from STEGO
Small enclosure heaters as the RC 016 are used to evenly distribute heat within compact enclosures thereby protecting electronic components from harmful condensation. Used as a convection heater, the RC 016 heats up the immediate ambient air. When used as a contact heater, a surface connection with... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; EnclosureHeater
- Maximum Operating Temperature: -49 to 158
from Backer Hotwatt Inc.
Features. This Maximum Flow Air Heater design is encased within a 2-3 ⁄8 " O.D. tube with a cross frame heating element for minimum resistance to air flow. It has a practical operating range of up to 200CFM with temperatures to up 600 ºF (315 ºC). For easier mounting. Hotwatt can... [See More]
- Sleeve (Sheath) Material: Aluminum; Stainless Steel (optional feature)
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; HeatTorch
- Heating Capacity: 0.38 to 2.00
from Thermon, Inc
The HT hopper heating module is a rugged, self-contained high performance heater designed for reliable operation on surfaces prone to vibration. Designed to provide heat outputs up to 4,650 watts per square meter (3 watts per square inch) depending on the application, the HT module distributes heat... [See More]
- Sleeve (Sheath) Material: Aluminum; Steel
- Fuel / Energy Source: Electric
- Heater Type: Specialty Industrial Heaters; Hopper Heating Module
- Maximum Operating Temperature: -40 to 800
from Tempco Electric Heater Corporation
Tempco offers three standard Circulation Heater designs that are compact lightweight unit used for heating gases or liquids. The material being heated is pumped through the coiled seamless 316 SS tubing which has been cast into an aluminum body that acts as the heat exchanger. A... [See More]
- Sleeve (Sheath) Material: Aluminum; Brass
- Fuel / Energy Source: Electric
- Heater Type: Cast-In Heater; Circulation Heater
- Watt Density: 35 to 45
from WATTCO
Finned strip heaters, often considered component heaters, are an electric heating element that maximizes heat intensity and transfer effectively in an area. Steel fin strip heaters are an excellent industrial heating product that can be easily controlled by using a heating control panel, mechanical... [See More]
- Sleeve (Sheath) Material: Aluminum; Iron; Stainless Steel; Steel
- Fuel / Energy Source: Electric
- Heater Type: Strip
- Maximum Operating Temperature: 1200
from STEGO
Compact convection heater of temperature class T5 (212 °F / 100 °C max.) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment. Technical Data. [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; EnclosureHeater; Explosion-proof Heater; RoomSpace
- Maximum Operating Temperature: -76 to 185
from Tempco Electric Heater Corporation
The challenging operating parameters these Cast-In Heaters are required for are primarily due to the presence of excessive contamination, high watt densities and high temperature as well as unusual physical and dimensional requirements. Cast-In Heaters are less susceptible to contamination... [See More]
- Sleeve (Sheath) Material: Aluminum; Bronze Alloy
- Fuel / Energy Source: Electric
- Heater Type: Cast-In Heater
- AC Voltage Required: 240 to 460
from WATTCO
Strip heaters, often known as component heaters, are a simple way of using surface area to transfer heat effectively. Steel strip heaters are an excellent industrial heating product and can be easily controlled by using a temperature controller such as a mechanical thermostat or a cost effective... [See More]
- Sleeve (Sheath) Material: Aluminum; Iron; Stainless Steel; Steel
- Fuel / Energy Source: Electric
- Heater Type: Strip
- Maximum Operating Temperature: 1200
from STEGO
Compact convection heater of temperature class T4 (275 °F / 135 °C max.) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment. Temperature class. [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; EnclosureHeater; Explosion-proof Heater; RoomSpace
- Maximum Operating Temperature: -76 to 122
from Tempco Electric Heater Corporation
Tempco Cast-In Aluminum Platen Heaters are a logical choice to satisfy these critical application parameters, as the aluminum alloy has excellent thermal conductivity and a highly reliable, computer designed heating element which provides good contamination resistance. Optional cooling tubes can be... [See More]
- Sleeve (Sheath) Material: Aluminum; Bronze
- Fuel / Energy Source: Electric
- Heater Type: Cast-In Heater
- Maximum Operating Temperature: 700 to 1350
from STEGO
The compact high performance fan heater DCR 030 prevents formation of condensation and frost and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The fan heater is available with an integrated electronic thermostat or integrated electronic... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; EnclosureHeater
- Heating Capacity: 0.20
from Tempco Electric Heater Corporation
We are at the forefront of the industry, addressing the challenges of stringent operating parameters and high quality requirements faced by original equipment manufacturers specializing in the semiconductor, wave solder and reflow surface mount processes. By employing state-of-the-art technologies... [See More]
- Sleeve (Sheath) Material: Aluminum; Brass; Bronze
- Fuel / Energy Source: Electric
- Heater Type: Cast-In Heater; Water Heaters
from STEGO
The compact high performance fan heater DCR 130 prevents formation of condensation and frost and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The fan heater is available with an integrated electronic thermostat or electronic hygrostat. [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; EnclosureHeater
- Heating Capacity: 0.20
from Tempco Electric Heater Corporation
Tempco's thermo-platens are made from aluminum, bronze and brass alloys. These materials provide excellent thermal conductivity for rapid heat transfer with uniform temperature gradients. To further enhance heat profiles, the formation and the location of the tubular heaters within the casting are... [See More]
- Sleeve (Sheath) Material: Aluminum; Brass (optional feature); Bronze
- Fuel / Energy Source: Electric
- Heater Type: Cast-In Heater
- Maximum Operating Temperature: 700 to 1350
from STEGO
The RCE 016 small heaters have been designed to prevent condensation and to ensure a minimum operating temperature in small enclosures. Technical Data. Operating voltage. see table below. Heating element. PTC resistor - temperature limiting. Heater body. aluminum, anodized. Insulation. PTFE /... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; Cartridge Heater; EnclosureHeater
- Maximum Operating Temperature: 329
from Tempco Electric Heater Corporation
Transfer pipes used in large-scale extrusion lines are difficult to heat because of their irregular geometry. They are not machined cylinders so proper contact and heat transfer are difficult to achieve. Consequently, a special Cast-In Heater must be engineered for each pipe to accommodate its... [See More]
- Sleeve (Sheath) Material: Aluminum; Brass (optional feature); Bronze
- Fuel / Energy Source: Electric
- Heater Type: Cast-In Heater
- Maximum Operating Temperature: 700 to 1350
from STEGO
Clip fixing and pressure clamp for quick mounting. Dynamic heating up through PTC technology. Wide voltage range. Additional approvals. Compact heater with PTC heating elements for heating enclosures with electrical or electronic components. The heater prevents too low temperatures and thus... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; EnclosureHeater
- Heating Capacity: 0.06 to 0.15
from Tempco Electric Heater Corporation
They are constructed using a 6063 aluminum finned body and a welded flange. The lightweight outer finned structure in contact with the heated media provides a low watt density surface in shorter immersion lengths for heating sensitive organic fluids that are susceptible to coking and carbonization. [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Immersion Heater
- Maximum Operating Temperature: 700
from STEGO
Clip fixing for quick mounting. Dynamic heating up through PTC technology. Wide voltage range. Additional approvals. Compact heater with PTC heating elements for heating enclosures with electrical or electronic components. The heater prevents too low temperatures and thus condensation harming the... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; EnclosureHeater
- Heating Capacity: 0.01 to 0.05
from Tempco Electric Heater Corporation
L-shaped Cast-In Heaters are designed for square/rectangular applications. For mounting purposed, heaters can be designed with 45 ° flanged ear extensions that are bolted and drawn together, or can be made with through holes machined into the casting body to bolt directly onto the barrel itself. [See More]
- Sleeve (Sheath) Material: Aluminum; Brass; Bronze
- Fuel / Energy Source: Electric
- Heater Type: Cast-In Heater
- Phase: Three Phase AC Voltage
from STEGO
The compact high-performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The heater may only be operated together with a fan, but is also available without axial fan (for... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; EnclosureHeater
- Heating Capacity: 0.50
from Tempco Electric Heater Corporation
Stainless steel tubing for liquid cooling is placed in the additional channels of the aluminum track next to the tubular heater in the Heat and Cool designs. The overall low mass construction and high thermal conductivity of the aluminum provides extremely uniform surface temperatures and rapid... [See More]
- Sleeve (Sheath) Material: Aluminum; Stainless Steel
- Fuel / Energy Source: Electric
- Heater Type: Band Heater
- Maximum Operating Temperature: 650
from STEGO
The compact high-performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The heater may only be operated together with a fan, but is also available without axial fan (for... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; EnclosureHeater; ForcedAir
- Heating Capacity: 0.50
from Tempco Electric Heater Corporation
Ruggedly constructed .315 diameter heating elements are the heat source for Maxistrip heaters, providing excellent life. Specially designed aluminum track houses the tubular heating element, providing an excellent heat sink for rapid heat transfer and good temperature uniformity. The surface contact... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Strip
- Maximum Operating Temperature: 650
from STEGO
The compact HVL 031 high-performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures. For large OEM use, this fan heater can also be provided without the fan, in which case the OEM/customer must provide a fan which meets the... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; EnclosureHeater
- Maximum Operating Temperature: -49 to 158
from STEGO
Clip fixing and pressure clamp for quick mounting. Low surface temperature. Earthed plastic casing. Wide voltage range. Integrated thermostat. Safe and stable performance under stressful conditions. Shock and vibration proof. Compact heater with PTC heating elements for heating enclosures. The... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; EnclosureHeater
- Heating Capacity: 0.05 to 0.15
from Trent, Inc.
Used for oil preheating, oil baths, wax and other heat transfer fluids. TRENT FO Series Fintube Heaters are designed to give years of trouble-free service when the tubes are completely covered with fluid, used on correct voltage and kept free of carbonization. TRENT FO Series Fintube Heater casings... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Maximum Operating Temperature: 550
from Durex Industries
Durex Cast In Platen heaters are manufactured from aluminum or bronze alloys, the cast in platens consists of a tubular heating element that is designed and formed to provide maximum efficiency and temperature uniformity on the working surface of the casting. The cast in platen heaters can also be... [See More]
- Sleeve (Sheath) Material: Aluminum; Alloy
- Fuel / Energy Source: Electric
- Heater Type: Cast-In Heater
- Maximum Operating Temperature: 752
from TPI Corporation
SLIM CONTOURED TYPE. WHITE COLOR. 24 INCH. 6 INCH. ETL (CANADA AND US) APPROVAL. HIGH ALTITUDE AREA APPLICATION. 120 V VOLTAGE RATING. WALL MOUNTING. 3.1 AMPERE CURRENT RATING. 375 W POWER RATING. BUILT-IN THERMOSTAT CONTROL TYPE. 1275 BTU/HR HEATING CAPACITY. ALUMINUM FINNED ALUMINUM HEATING... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; RoomSpace
- Heating Capacity: 0.38
from Solaronics, Inc.
Solaronics Compact Tube Heater is the world's most versatile gas infrared heater. Installs quickly, just hang and connect. Saves up to 75% in energy costs. All-Weather gas infrared heater use Outdoors or Indoors. Fits standard 2' x 4' ceiling panel grids. Applications. Restaurant Patios. Car Washes. [See More]
- Sleeve (Sheath) Material: Aluminum; Stainless Steel
- Fuel / Energy Source: Natural Gas / Propane
- Heater Type: Radiant Heater; Radiant Reflective Process Heater; RoomSpace
- Heating Capacity: 8.21 to 8.79
from DBK USA, Inc.
Self-regulating heating element in an aluminium profile in flat design. Features: Easy installation through the external profile lugs (e.g. screwing, riveting, etc.) Optimum heat conduction through the profile. Available in different power ranges [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Cartridge Heater
- Maximum Operating Temperature: 464
from OMEGA Engineering, Inc.
Efficient Heat Transfer is provided by high quality nickel chromium resistor wire wound on a select mica strip and enclosed in a die-formed aluminum coated steel sheath. Long-Term Durability is assured by non-hygroscopic mica insulation. Uniform Fit to ±1/16". Type A Extra Flexible Stranded... [See More]
- Sleeve (Sheath) Material: Aluminum; Steel
- Fuel / Energy Source: Electric
- Heater Type: Band Heater
- Maximum Operating Temperature: 900
from Pfannenberg
Our FLH Series of Heaters are available as a radiant heater or as a forced air heater for larger wattages. These heaters are designed to protect electronics from low temperatures and moisture caused by high humidity or rapid temperature changes. Available in 68 models. Housing: Anodized aluminum. [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; EnclosureHeater; ForcedAir
- Maximum Operating Temperature: 158 to 185
from Aitken Products, Inc.
Aitken unit heaters offer flexible heat for supplemental or primary heating of warehouses, factories or public buildings, stores, stockrooms, or exposed areas or additions. Prolonged Element Life. Aitken electric unit heaters are easy to install and service. All our units feature prolonged element... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; ForcedAir; RoomSpace
- Heating Capacity: 5.00
from Chromalox
120V-480V. Maximum 600W. Anodized Aluminum. 6" & 12" Lengths Available. 0, 1, or 2 sets of Heat Sinks. Ambient Thermostats. Adjustable Thermostat Optional on 120V & 240V. CSA Certified; Class I, Div. 1 &2, Groups B, C, D. Advantages. Allows for heat to be provided in areas otherwise... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: EnclosureHeater; Explosion-proof Heater
- Heating Capacity: 0.60
from Durex Industries
The standard cast-in pedestal heater manufactured by Durex for semicondcutor processing is designed to provide a quick solution for wafer processing applications. These cast-in heaters are designed specifically for 200mm and 300mm wafers. The standard design eliminates the need for costly tooling... [See More]
- Sleeve (Sheath) Material: Aluminum; Alloy
- Fuel / Energy Source: Electric
- Heater Type: Cartridge Heater; Specialty Industrial Heaters; Pedestal Heater
- Maximum Operating Temperature: 752
from TPI Corporation
SLIM CONTOURED TYPE. IVORY COLOR. 24 INCH. 6 INCH. ETL (CANADA AND US) APPROVAL. COMMERCIAL APPLICATION. 120 V VOLTAGE RATING. WALL MOUNTING. 3.1 AMPERE CURRENT RATING. 375 W POWER RATING. BUILT-IN THERMOSTAT CONTROL TYPE. 1275 BTU/HR HEATING CAPACITY. ALUMINUM FINNED BANKER BRONZE WITH STAINLESS... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; RoomSpace
- Heating Capacity: 0.38
from Solaronics, Inc.
Solaronics Gas-Fired High-Intensity Infrared Heaters provide instant heat on demand reaching temperature in less than a minute. Save up to 75% in energy costs. Excellent for space and spot heating in commercial and industrial buildings. Two-stage models available. Applications. Loading Docks. [See More]
- Sleeve (Sheath) Material: Aluminum; Stainless Steel
- Fuel / Energy Source: Natural Gas / Propane
- Heater Type: Radiant Heater; Radiant Flat Panel Heater; RoomSpace
- Heating Capacity: 8.79 to 58.62
from DBK USA, Inc.
Self-regulating heating element of round shape with aluminium casing. The PAR-series consists of an aluminium tube, the PSA-series. Respectively, of an aluminium cup. Features: Compact heating element. Simple mounting. Optimum heat transfer through the aluminium casing. Various performance ranges... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Cartridge Heater
- Maximum Operating Temperature: 464
from OMEGA Engineering, Inc.
FEATURES. Efficient Heat Transfer is provided by high quality nickel chromium resistor wire wound on a selected mica strip and enclosed in a die-formed aluminum coated steel sheath. Long-Term Durability is assured by non-hygroscopic mica insulation. Uniform Fit to ± 1/16" because of low... [See More]
- Sleeve (Sheath) Material: Aluminum; Steel
- Fuel / Energy Source: Electric
- Heater Type: Band Heater
- Maximum Operating Temperature: 900
from Pfannenberg
Our FLH-TF Series of Fan Heaters with Thermostat follow a traditional design proven to provide heat to enclosures. These heaters are designed to protect electronics from low temperatures and moisture caused by high humidity or rapid temperature changes. Available in 4 models. Housing: Aluminum... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; EnclosureHeater; ForcedAir
- Maximum Operating Temperature: 167
from Aitken Products, Inc.
Aitken Features: Nearly indestructible, made of heavy gauge, polished aluminum with impact-resistant heating elements. Designed for overhead installations but can be used in many positions. Easy installation, mounting brackets are provided for hanging units. Clean, no combustion byproducts, no... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; Radiant Heater; Radiant Reflective Process Heater; RoomSpace
- Heating Capacity: 13.50
from TPI Corporation
SLIM CONTOURED TYPE. 22 GAUGE STEEL MATERIAL. POWDER COATED FINISH. IVORY COLOR. 24 INCH. 6 INCH. 1 PHASE(S). UL APPROVAL. 120 V VOLTAGE RATING. WALL MOUNTING. 375 W POWER RATING. BUILT IN THERMOSTAT CONTROL TYPE. 1275 BTU/HR HEATING CAPACITY. ALUMINUM FINNED TUBULAR STAINLESS STEEL HEATING ELEMENT. [See More]
- Sleeve (Sheath) Material: Aluminum; Stainless Steel
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; RoomSpace
- Heating Capacity: 0.38
from Solaronics, Inc.
Solaronics Suntube IV GQ Standard-Duty Gas-Fired Infrared Radiant Tube Heaters are proven single-stage heaters in the Global Quality Series. Save up to 75% in energy costs. Aluminized steel heat exchangers resist corrosion. Models available with gas inputs from 40,000 to 200,000 BTU/hour. [See More]
- Sleeve (Sheath) Material: Aluminum; Stainless Steel (optional feature)
- Fuel / Energy Source: Natural Gas / Propane
- Heater Type: Radiant Heater; Radiant Reflective Process Heater; RoomSpace
- Heating Capacity: 11.72 to 58.62
from DBK USA, Inc.
Self-regulating heating element of rectangular shape with aluminium casing. Features: Compact heating element. Simple mounting. High thermal efficiency. Various performance ranges available [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Cartridge Heater
- Maximum Operating Temperature: 464
from OMEGA Engineering, Inc.
•. Compact Fan Heater for Increased Heat Output. •. Built-In Overheat Protection. •. DIN Rail Mountable. •. Maintains Minimum Operating Temperatures in Enclosures. •. Helps to Prevent Failure of Electronic Components Caused by Condensation and Corrosion [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; EnclosureHeater
- Maximum Operating Temperature: 167
from Pfannenberg
Our PRH-M Mini Radiant Heaters are available in 3 models ranging from 10 W – 30 W. These small heaters are ideal for small outdoor enclosures, preventing condensate formation. Housing: Black anodized aluminum. FEATURES. Easy Mounting Options. Unit can be connected to a standard DIN rail... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; EnclosureHeater; Radiant Heater
- Maximum Operating Temperature: 95 to 140
from Aitken Products, Inc.
Aitken Features: Nearly indestructible, made of heavy gauge, polished aluminum with impact-resistant heating elements. Designed for overhead installations but can be used in many positions. Easy installation, mounting brackets are provided for hanging units. Clean, no combustion byproducts, no... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; Radiant Heater; Radiant Reflective Process Heater; RoomSpace
- Heating Capacity: 2.00
from TPI Corporation
ARCHITECTURAL TYPE. 12 GAUGE HEAVY DUTY EXTRUDED ALUMINUM MATERIAL. POWDER COATED FINISH. WHITE COLOR. 24 INCH. 8-1/2 INCH. ETL (CANADA AND US) APPROVAL. 120 V VOLTAGE RATING. WALL MOUNTING. 3.1 AMPERE CURRENT RATING. 375 W POWER RATING. THERMOSTAT CONTROL TYPE. 1275 BTU/HR HEATING CAPACITY. [See More]
- Sleeve (Sheath) Material: Aluminum; Stainless Steel
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; RoomSpace
- Heating Capacity: 0.38
from Solaronics, Inc.
Solaronics Suntube IV Versamount Heavy Duty Gas-Fired Infrared Radiant Tube Heaters are proven single-stage heaters. Save up to 75% in energy costs. 12 gauge black steel heat exchangers provide heat transfer efficiency, long system life and are twice the thickness of industry norm. Applications. [See More]
- Sleeve (Sheath) Material: Aluminum; Stainless Steel (optional feature)
- Fuel / Energy Source: Natural Gas / Propane
- Heater Type: Radiant Heater; Radiant Reflective Process Heater; RoomSpace
- Heating Capacity: 11.72 to 58.62
from DBK USA, Inc.
Technical Features. Output ranges: 30W – 100/300W. Voltage range: 12-24V AC/DC , 110-240V AC/DC. Special voltages possible on request. CSA upon enquiry. Special features. Thermal separation of the ceramic heater from the external profile (patented). Limited external profile temperature. [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; EnclosureHeater
- Maximum Operating Temperature: 158 to 212
from OMEGA Engineering, Inc.
This compact heater is designed for many different applications including electrical and electronic enclosures, display panels, access and parking control systems and personnel booths. [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; EnclosureHeater
- Heating Capacity: 0.10 to 0.40
from Aitken Products, Inc.
Aitken Features: Nearly indestructible, made of heavy gauge, polished aluminum with impact-resistant heating elements. Designed for overhead installations but can be used in many positions. Easy installation, mounting brackets are provided for hanging units. Clean, no combustion byproducts, no... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; Radiant Heater; Radiant Reflective Process Heater; RoomSpace
- Heating Capacity: 6.00
from TPI Corporation
ARCHITECTURAL TYPE. 12 GAUGE HEAVY DUTY EXTRUDED ALUMINUM MATERIAL. POWDER COATED FINISH. WHITE COLOR. 28 INCH. 8-1/2 INCH. ETL (CANADA AND US) APPROVAL. 120 V VOLTAGE RATING. WALL MOUNTING. 4.2 AMPERE CURRENT RATING. 500 W POWER RATING. THERMOSTAT CONTROL TYPE. 1706 BTU/HR HEATING CAPACITY. [See More]
- Sleeve (Sheath) Material: Aluminum; Stainless Steel
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; RoomSpace
- Heating Capacity: 0.50
from Solaronics, Inc.
Solaronics True Dual Stainless Steel Two-Stage Gas Infrared Radiant Tube Heaters provide precise air to gas ratios at both the high- and low-heat stages for optimum efficiency. Save up to 75% in energy costs. 304L stainless steel heat exchangers resist wet, humid and corrosive environments. [See More]
- Sleeve (Sheath) Material: Aluminum; Stainless Steel
- Fuel / Energy Source: Natural Gas / Propane
- Heater Type: Radiant Heater; Radiant Reflective Process Heater; RoomSpace
- Phase: Single Phase AC Voltage
from DBK USA, Inc.
Technical features. Output ranges: 30W – 100/300W. Voltage range: 12-24V AC/DC , 110-240V AC/DC. Special voltages possible on request. CSA upon enquiry. Special features. Rugged aluminium extrusion profile. Compact design with high power density. Self-regulating ceramic heater. Safety by... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; EnclosureHeater
- Maximum Operating Temperature: 266 to 401
from Aitken Products, Inc.
Aitken Features: All stainless steel clips, no ceramics to break. Large 0.425 Diameter Elements, affected less by air movements, plus higher sheath temperature results in more radiant efficiency. Components on all Aitken heaters are made in the USA. All replacement parts available for shipping... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; Radiant Heater; Radiant Reflective Process Heater; RoomSpace
- Heating Capacity: 13.50
from TPI Corporation
ARCHITECTURAL TYPE. 12 GAUGE HEAVY DUTY EXTRUDED ALUMINUM MATERIAL. POWDER COATED FINISH. BROWN COLOR. 28 INCH. 8-1/2 INCH. ETL (CANADA AND US) APPROVAL. COMMERCIAL APPLICATION. 120 V VOLTAGE RATING. WALL MOUNTING. 4.2 AMPERE CURRENT RATING. 500 W POWER RATING. THERMOSTAT CONTROL TYPE. 1706 BTU/HR... [See More]
- Sleeve (Sheath) Material: Aluminum; Stainless Steel
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; RoomSpace
- Heating Capacity: 0.50
from Solaronics, Inc.
Solaronics True Dual Aluminized Two-Stage Gas-Fired Infrared Radiant Tube Heaters provide precise air to gas ratios at both the high- and low-heat stages for optimum efficiency. Save up to 75% in energy costs. Aluminized steel heat exchangers resist corrosion. Applications. Maintenance Facilities. [See More]
- Sleeve (Sheath) Material: Aluminum; Stainless Steel (optional feature); Steel (optional feature)
- Fuel / Energy Source: Natural Gas / Propane
- Heater Type: Radiant Heater; Radiant Reflective Process Heater; RoomSpace
- Heating Capacity: 19.05 to 58.62
from DBK USA, Inc.
Technical features. Output ranges: 30W – 100/300W. Voltage range: 12-24V AC/DC , 110-240V AC/DC. Special voltages available on request. For example: 12 - 24 V or 400 V. Special features. Flat design. Large contact surface. With touch protection. Maximum achievable power results from a direct... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; EnclosureHeater
- Maximum Operating Temperature: 392
from Aitken Products, Inc.
Aitken Features: All stainless steel clips, no ceramics to break. Large 0.425 Diameter Elements, affected less by air movements, plus higher sheath temperature results in more radiant efficiency. Components on all Aitken heaters are made in the USA. All replacement parts available for shipping... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; Radiant Heater; Radiant Reflective Process Heater; RoomSpace
- Heating Capacity: 4.50
from TPI Corporation
SLIM CONTOURED, HEAVY DUTY TYPE. 12 GAUGE HEAVY DUTY EXTRUDED ALUMINUM MATERIAL. POWDER COATED FINISH. WHITE COLOR. 28 INCH. 8-1/2 INCH. ETL (CANADA AND US) APPROVAL. HIGH ALTITUDE AREA APPLICATION. 120 V VOLTAGE RATING. WALL MOUNTING. 3.3 AMPERE CURRENT RATING. 400 W POWER RATING. THERMOSTAT... [See More]
- Sleeve (Sheath) Material: Aluminum; Copper
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; RoomSpace
- Heating Capacity: 0.40
from Aitken Products, Inc.
Aitken Features: All stainless steel clips, no ceramics to break. Large 0.425 Diameter Elements, affected less by air movements, plus higher sheath temperature results in more radiant efficiency. Components on all Aitken heaters are made in the USA. All replacement parts available for shipping... [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; Radiant Heater; Radiant Reflective Process Heater; RoomSpace
- Heating Capacity: 6.00
from TPI Corporation
SLIM CONTOURED, HEAVY DUTY TYPE. 12 GAUGE HEAVY DUTY EXTRUDED ALUMINUM MATERIAL. POWDER COATED FINISH. BROWN COLOR. 28 INCH. 8-1/2 INCH. ETL (CANADA AND US) APPROVAL. COMMERCIAL, HIGH ALTITUDE AREA APPLICATION. 120 V VOLTAGE RATING. WALL MOUNTING. 3.3 AMPERE CURRENT RATING. 400 W POWER RATING. [See More]
- Sleeve (Sheath) Material: Aluminum; Copper
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; RoomSpace
- Heating Capacity: 0.40
from TPI Corporation
ARCHITECTURAL TYPE. 12 GAUGE HEAVY DUTY EXTRUDED ALUMINUM MATERIAL. POWDER COATED FINISH. WHITE COLOR. 72 INCH. 8-1/2 INCH. ETL (CANADA AND US) APPROVAL. 208 V VOLTAGE RATING. WALL MOUNTING. 7.2 AMPERE CURRENT RATING. 1500 W POWER RATING. THERMOSTAT CONTROL TYPE. 5100 BTU/HR HEATING CAPACITY. [See More]
- Sleeve (Sheath) Material: Aluminum; Stainless Steel
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; RoomSpace
- Heating Capacity: 1.50
from TPI Corporation
SLIM CONTOURED TYPE. IVORY COLOR. 24 INCH. 6 INCH. ETL (CANADA AND US) APPROVAL. 208/240 V VOLTAGE RATING. WALL MOUNTING. 1.4 AMPERE AT 208 V, 1.6 AMPERE AT 240 V CURRENT RATING. 281 W AT 208 V, 375 W AT 240 V POWER RATING. BUILT-IN THERMOSTAT CONTROL TYPE. 955 BTU/HR AT 208 V, 1275 BTU/HR AT 240 V... [See More]
- Sleeve (Sheath) Material: Aluminum; Stainless Steel
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; RoomSpace
- Heating Capacity: 0.28 to 0.38
from TPI Corporation
STEEL MATERIAL. EPOXY POWDER COATED FINISH. 20 INCH. 4 INCH. ETL (CANADA AND US) APPROVAL. CONSTRUCTION SHED, PUMP HOUSE, RELAY STATION, UTILITY ROOM APPLICATION. 120 V VOLTAGE RATING. 4.2 AMPERE CURRENT RATING. 500 W POWER RATING. AUTOMATIC THERMOSTAT CONTROL TYPE. 1706 BTU/HR HEATING CAPACITY. [See More]
- Sleeve (Sheath) Material: Aluminum
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; RoomSpace
- Heating Capacity: 0.50
from TPI Corporation
11 GAUGE PERFORATED STEEL MATERIAL. EPOXY POWDER COATED PAINTED FINISH. TEXTURED IVORY COLOR. 18 INCH. 1 PHASE(S). ETL (CANADA AND US) APPROVAL. 120 V VOLTAGE RATING. WALL MOUNTING. 4.167 AMPERE CURRENT RATING. 500 W POWER RATING. 40 TO 110 DEG F BUILT-IN 1-POLE TEMPER PROOF THERMOSTAT CONTROL TYPE. [See More]
- Sleeve (Sheath) Material: Aluminum; Stainless Steel
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; RoomSpace
- Heating Capacity: 0.50
from TPI Corporation
16 GAUGE STEEL MATERIAL. EPOXY POWDER COATED FINISH. GRAY COLOR. 9 INCH. 18 INCH. 3 PHASE(S). ETL (CANADA AND US) APPROVAL. 480 V VOLTAGE RATING. WALL MOUNTING. 4.3 AMPERE CURRENT RATING. 3600 W POWER RATING. 12286 BTU/HR HEATING CAPACITY. FINNED ALUMINUM STAINLESS STEEL HEATING ELEMENT. CABINET... [See More]
- Sleeve (Sheath) Material: Aluminum; Stainless Steel
- Fuel / Energy Source: Electric
- Heater Type: Air Heater; RoomSpace
- Heating Capacity: 3.60