Spline Shaft Linear Bearing Rails
from KHK USA, Inc.
SV and SVI series are made according to the automotive involute spline standard; Involute spline shafts and bushings are thermal refined to have good abrasion-resistance. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable,... [See More]
- Guide / Rail Shape: Spline Shaft
from Stock Drive Products & Sterling Instrument - SDP/SI
There are two types of splines: internal and external. A spline is a series of teeth on a drive shaft that meshes with grooves in a (mating) gear. The surfaces of the spline and the gear allow for smooth transfer of force along a straight line and can generate higher torque due to the uniform... [See More]
- Guide / Rail Shape: Spline Shaft
- Guide Length: 7.87
- Material: Steel; Carbon Steel
from Stock Drive Products & Sterling Instrument - SDP/SI
There are two types of splines: internal and external. A spline is a series of teeth on a drive shaft that meshes with grooves in a (mating) gear. The surfaces of the spline and the gear allow for smooth transfer of force along a straight line and can generate higher torque due to the uniform... [See More]
- Guide / Rail Shape: Spline Shaft
- Guide Length: 12
- Material: Steel; Carbon Steel
from Arrow Gear Company
Splines are another type of parallel axis component manufactured by Arrow Gear. While gears can be configured in a) both external, or b) one external and one internal, splines are always used in a combination of one external and one internal. Both splined members have the same number of teeth with... [See More]
- Guide / Rail Shape: Spline Shaft
- Material: Stainless Steel; Steel
from Grob, Inc.
Grob Standard Spline Shafting has been designed to maximize torsional strength and contact area. Grob spline shafts are made with even number of teeth and are parallel over two or more teeth. When your project requires mating parts, look no further. [See More]
- Guide / Rail Shape: Spline Shaft
- Additional Material Specifications: Unhardened; Chipless Cold-Rolled
- Material: Aluminum (optional feature); Stainless Steel (optional feature); Steel; 1117 Mild Steel
- Guide Width / Diameter: 0.2630 to 0.2650
from ATLANTA Drive Systems, Inc.
Our shafts, sleeves and hubs are low-priced joining elements designed for application in the mechanical engineering sector, the automotive industry (power take-off shafts) etc. Apart from profles milled from solid stock featuring solid shaft ends, we also supply from stock full-length drawn or... [See More]
- Guide / Rail Shape: Spline Shaft
- Additional Material Specifications: Unhardened
- Material: Steel
- Guide Width / Diameter: 1.18