AC Powered Submersible Pumps
from Princess Auto Limited
1/2 HP Deep Well Submersible Pump [See More]
- Power Source: 230 VAC; AC
- Pump Housing Material: Stainless Steel
- HP: 0.50
from Myers by Pentair
Myers submersible wastewater pumps are the right choice when difficult to pump fibrous or stringy solids are to be expected. They provides smooth, vibration-free operation over the entire performance curve. The submersible dry pit wastewater pumps are a heavy-duty non-clog series capable of passing... [See More]
- Power Source: 230V to 460V, Three Phase, 480V to 690V, Three Phase; AC
- Discharge Pressure: 115.3 to 392.1
- Liquid Flow: 280.0 to 7750.0
- Discharge Size: 3.000 to 12.000
from Sulzer Ltd.
For Construction and Mining Dewatering applications, where weight and portability is a key factor, Sulzer is able to supply a wide range of light weight robust products that meet the requirements of most dewatering applications. Benefits. Easy start – plug in without worrying about... [See More]
- Power Source: AC
- Type / Application: Dewatering Pump
- Discharge Size: 2.500 to 4.000
- Media: Ground Water, Liquids, Sludge, High Temperature Media
from STA-RITE by Pentair
Precision-engineered, high-quality, rugged stainless steel HS+ series pumps deliver efficient, dependable, performance even in rough, aggressive water. NUMBER OF STAGES: 7 to 24 (model dependent). VOLTAGE: Available in 115v, 230v 1- or 3-phase, or 460v 3-phase. NUMBER OF WIRES: 3 wires plus ground. [See More]
- Power Source: 115 VAC; AC
- Discharge Size: 1.250 to 1.500
- Liquid Flow: 5.0 to 20.0
- HP: 0.50 to 10.00
from Godwin, a xylem brand
The GST Sub-Prime pumps are a family of portable, electric, submersible pumps designed for trash-laden applications. Standard side discharge and semi-vortex cast iron impeller enable these units to handle solids up to 1 in (25mm) in diameter. The fully removable volute makes it quick and easy for... [See More]
- Power Source: 115 VAC; AC
- Type / Application: Centrifugal Pump; Trash Pump
- Pump Housing Material: Cast Iron; Stainless Steel (optional feature)
- Media: Abrasive, Ground Water
from Wilo AG
Submersible pump suitable for stationary, fully automatic operation. A pressure hose of appropriate length is connected for mobile use, while a pipe is connected to the pressure port for stationary applications. A residual current device for a trigger current of 30 mA that is to be provided onsite... [See More]
- Power Source: 50 Hz, 230V to 460V, Three Phase, 230 VAC; AC
- Discharge Pressure: 10.0
- Liquid Flow: 61.6
- Type / Application: Centrifugal Pump; Dewatering Pump; Utility Pump
from Bell & Gossett, a xylem brand
Multi-stage Vertical Turbine Pumps with bronze impellers and cast iron bowls. The line shaft turbine pumps have above-ground discharge with water-lubricated line shaft bearings. The column pipe coupling has bronze centering spiders with fluted-rubber line shaft bearings. The bowls are vitra-glass... [See More]
- Power Source: AC
- Discharge Pressure: ? to 346.0
- Liquid Flow: ? to 10000.0
- Pump Housing Material: Brass Bronze; Cast Iron
from KSB AG
Design. Floodable single-pump or dual-pump sewage lifting unit for automatic disposal of sewage and faeces below the flood level. Automatedwith LevelControl. Applications. Basement flats, bars, basement party rooms and saunas, cinemas and theatres, department stores and hospitals, hotels,... [See More]
- Power Source: AC
- HP: 15.81
- Liquid Flow: 616.4
- Pump Housing Material: Plastic; Polypropylene, Polyethylene
from Wacker Neuson SE
No matter how large or small the job, Wacker Neuson's submersible pumps offer the versatility and durability contractors needs for dewatering on the job sites. This comprehensive family of pumps offers big pumps features for a small pump investment. The heavy-duty line is capable of handling solids... [See More]
- Power Source: 115 VAC, 230V to 460V, Three Phase, 230 VAC; AC
- Discharge Pressure: 91.1 to 287.6
- Liquid Flow: 43.0 to 428.0
- Discharge Size: 0.750 to 4.000
from Crane Pumps & Systems
Barnes Solids Handling pump series are commonly found in applications involving sewage, effluent, wastewater processing and solids laden media. Available in both standard and explosion proof configurations. Barnes Solids Handling pumps are constructed of durable cast iron with oil-filled motors to... [See More]
- Power Source: 575 V, 115 VAC; AC
- Discharge Size: 3.000 to 8.000
- Liquid Flow: 4600.0
- HP: 0.75 to 150.00
from Xylem Applied Water Systems
110 Volt Pump. Designed to remove water from basements, garages, stairwells, utility rooms, and other utility applications. Available in non-automatic and automatic versions utilizing standard 110 V AC current. UL listed. Compact, efficient long-life motors. Totally submersible. Rust and corrosion... [See More]
- Power Source: 100V / 200V, Single Phase; AC
- Pump Housing Material: Plastic; Thermo Plastic
- Liquid Flow: 30.0
- Type / Application: Centrifugal Pump
from Griffin Pump & Equipment, Inc.
Griffin Pump and Equipment Inc. offers a complete line of electric submersible pumps. Whether it is clean water, gray water, or trash laden effluent. Griffin can provide the right pump for your application. Electric submersible pumps are available for flows as low as a few gallons per minute to... [See More]
- Power Source: 115 VAC, 230V to 460V, Three Phase, 230 VAC; AC
- Media: Effluent, Ground Water, Liquids, Liquids with Solids, Potable Water
from Halliburton
Halliburton Electric Submersible Pumps (ESPs) are engineered, manufactured and tested to give you long service life. Accessories are available to increase resistance to abrasion or corrosion, and extra high-torque shafts are available for all models. For the centrifugal ESPs, the number of stages... [See More]
- Power Source: AC
- Discharge Pressure: 5000.0
- Liquid Flow: 11.7 to 73.0
- HP: 94.00 to 125.00
from Industrial Flow Solutions
Fahrenheit ® High temperature, corrosion-resistant dewatering pump. High temperature up to 200 °F (93 °C). Cast 316 stainless steel (ASTM 48), no welds. FKM Elastomers (EPDM or Buna optional). Double mechanical seal design with separate lip seal. Seal Minder ® moisture detection... [See More]
- Power Source: 115 / 230 V 1ph-60 Hz; 208 / 230 / 460 / 575 V, 3ph-60 Hz; AC
- Discharge Size: 2.000 to 4.000
- Liquid Flow: 66.0 to 647.0
- HP: 0.50 to 10.00
from Princess Auto Limited
1/2 HP Stainless Steel Submersible Pump [See More]
- Power Source: 115 VAC; AC
- Discharge Size: 1.500
- Liquid Flow: 50.0
- HP: 0.50
from Sulzer Ltd.
Sulzer offers one of the most comprehensive ranges of submersible pumps type ABS available on the market for use within Domestic & Commercial properties, light weight dewatering pumps for mining and construction and a heavy duty range of wastewater pumps suitable for handling high concentrations... [See More]
- Power Source: AC
- Discharge Pressure: 64.6 to 226.1
- Liquid Flow: 52.0 to 480.0
- Discharge Size: 1.250 to 3.000
from STA-RITE by Pentair
Features submersible heavy duty 304 stainless steel construction that will outperform ordinary fabricated stainless steel pumps in aggressive water conditions. Perfect for municipal, multiple housing, commercial, water fountain, irrigation, mine de-watering, and farm use. Features. Heavy-Duty... [See More]
- Power Source: 115 VAC; AC
- Discharge Size: 3.000 to 4.000
- Liquid Flow: 70.0 to 300.0
- HP: 1.00 to 60.00
from Godwin, a xylem brand
The GSP Series Submersible pumps are available up to 2 hp (1.5 kW) and offers flow rates up to 140 US GPM (31.8 m ³/hr) and maximum heads to 70 ft (21.3 m). With a slimline top discharge design this pump works nicely for draining unwanted water from utility boxes, manholes, and other hard to... [See More]
- Power Source: 115 VAC; AC
- Discharge Pressure: 90.0 to 149.9
- Liquid Flow: 70.0 to 140.0
- HP: 0.50 to ?
from Wilo AG
Non-self-priming, highly efficient fully stainless-steel high-pressure multistage centrifugal pump with EC motor in vertical design with integrated high-efficiency drive and in-line connections. Application. Water supply and pressure boosting. Industrial circulation systems. Process water. Cooling... [See More]
- Power Source: 50/60 Hz, 230V to 460V, Three Phase; AC
- Discharge Pressure: 71.1 to 341.4
- Liquid Flow: 17.6 to 330.2
- Type / Application: Centrifugal Pump
from KSB AG
Design. Floodable single-pump or dual-pump sewage lifting unit for automatic disposal of domestic sewage and faeces below the flood level. Automated with LevelControl. Applications. Basement flats, bars, basement party rooms and saunas, cinemas and theatres, department stores and hospitals, hotels,... [See More]
- Power Source: AC
- HP: 2.01
- Liquid Flow: 158.5
- Pump Housing Material: Plastic; Polypropylene
from Industrial Flow Solutions
Corrosion-resistant dewatering pump. Cast 316 stainless steel (ASTM 48), no welds. Rated A or B for corrosive resistance. FKM Elastomers (EPDM or Buna Optional). Double mechanical seal design with separate lip seal. Seal Minder ® moisture detection system (optional). Built in thermal protection. [See More]
- Power Source: 115 / 230 V 1ph-60 Hz; 208 / 230 / 460 / 575 V, 3ph-60 Hz; AC
- Discharge Size: 2.000 to 6.000
- Liquid Flow: 66.0 to 760.0
- HP: 0.50 to 30.00
from Princess Auto Limited
1/4 HP Submersible Water Pump [See More]
- Power Source: 115 VAC; AC
- Discharge Size: 0.500
- Liquid Flow: 23.3
- HP: 0.25
from STA-RITE by Pentair
The S.T.E.P. Plus D Series 4" submersible pump series in 10, 20, 30 and 50 GPM models dominates with superior draw-down capability. Sold & proven in aerobic & filtered effluent service applications. Features. 1/2, 1 or 1-1/2 HP. Available in 115 Volt or 230 Volt, single-phase, 2-wire. [See More]
- Power Source: 115 VAC; AC
- Pump Housing Material: Stainless Steel
- Liquid Flow: 10.0 to 50.0
- Media: Effluent
from Wilo AG
Multistage submersible pump in sectional construction with VdS approval for vertical or horizontal installation for supplying sprinkler systems. Application. For pumping water without long-fibre and abrasive constituents for supplying sprinkler systems. Special features/product advantages. VdS... [See More]
- Power Source: 50 Hz, 230V to 460V, Three Phase; AC
- Type / Application: Centrifugal Pump
- Liquid Flow: 2641.7
- Media: Potable Water
from KSB AG
Fully floodable, vertical, close-coupled single-stage submersible motor pumps, IP 68, with or without level control, for a maximum immersion depth of 10 m. Applications: automatic drainage of sumps, pits, yards and basements subject to a flooding risk, lowering of surface water levels, drainage of... [See More]
- Power Source: 230 VAC; AC
- HP: 1.41
- Liquid Flow: 72.6
- Pump Housing Material: Plastic
from Industrial Flow Solutions
General sump dewatering pump. High flow up to 650 GPM. Cast iron construction. 304 stainless steel motor housing. Double mechanical seal design with separate lip seal. Seal Minder ® moisture detection system (optional). Built in thermal protection. Solids capability up to 3/8 ”. 2 pole... [See More]
- Power Source: 115 / 230 V 1ph-60 Hz; 208 / 230 / 460 / 575 V, 3ph-60 Hz; AC
- Discharge Size: 2.000 to 4.000
- Liquid Flow: 66.0 to 647.0
- HP: 0.50 to 10.00
from Princess Auto Limited
1/6 HP Submersible Multipurpose Pump [See More]
- Power Source: 115 VAC; AC
- Discharge Size: 1.000
- Liquid Flow: 20.0
- HP: 0.17
from STA-RITE by Pentair
STA-RITE brings commercial grade, dependable Sump Pumps, Sewage Pumps, and Effluent Pumps and associated products to an ever-changing market. Customers know that a one-size-fits-all approach just is not going to satisfy today ’s demanding consumer. STA-RITE ’s industry leading molding... [See More]
- Power Source: 115 VAC; AC
- Type / Application: Centrifugal Pump
- Pump Housing Material: Cast Iron
- Media: Effluent, Ground Water
from Wilo AG
Submersible sewage pump for continuous duty, made of grey cast iron for stationary and portable wet well installation and stationary dry well installation. Application. For pumping in continuous duty of: Wastewater. Sewage containing faeces. Sludges up to max. 8 % dry matter (depending on the... [See More]
- Power Source: 50 Hz, 230V to 460V, Three Phase; AC
- Discharge Pressure: 4.3 to 29.9
- Liquid Flow: 792.5
- Type / Application: Centrifugal Pump
from KSB AG
Design. Fully or partly submerged, multistage, close-coupled centrifugal pump (min. immersion depth 0.1 m), low-level inlet, suction strainer with a max. mesh size of 2.5 mm. Applications. Water supply, spray irrigation and irrigation systems, washing plants, rainwater harvesting systems, water... [See More]
- Power Source: 230V to 460V, Three Phase, 230 VAC; AC
- HP: 1.47
- Liquid Flow: 35.2
- Pump Housing Material: Stainless Steel
from Industrial Flow Solutions
Explosion proof, corrosion-resistant, 316 stainless steel dewatering pump. FM-approved explosion proof motor. Meets NFPA (70), NEC, OSHA requirements for Class I, Division 1, Group C & D hazardous locations (temp. code T4). Cast 316 stainless steel (ASTM 48) wet end, no welds. FKM Elastomers... [See More]
- Power Source: 208 / 230 / 460 / 575 V; AC
- Discharge Size: 2.000 to 5.000
- Liquid Flow: 158.0 to 264.0
- HP: 2.00 to 5.00
from Wilo AG
Submersible sewage pump for intermittent operation with grey cast iron hydraulics and stainless steel motor for stationary and portable wet well installation and stationary dry well installation. Application. For pumping in intermittent operation of: Waste water and sewage. Waste water containing... [See More]
- Power Source: 50 Hz, 230V to 460V, Three Phase, 230 VAC; AC
- Discharge Pressure: 38.4
- Liquid Flow: 396.3
- Type / Application: Centrifugal Pump
from KSB AG
Irrigation set for wells with a diameter of 4 inches, comprising a submersible borehole pump, type S 100D or UPA 100C, and control unit. Applications: general and domestic water supply, spray irrigation, general irrigation, artificial lowering of groundwater level, pressure boosting, fire... [See More]
- Power Source: 230 VAC; AC
- HP: 1.47
- Liquid Flow: 2.2 to 26.4
- Pump Housing Material: Chrome Nickel Steel
from Industrial Flow Solutions
Explosion proof, corrosive resistant, high head, dewatering pump. HIGH HEAD up to 112 ’. FM-approved explosion proof motor. Meets NFPA (70), NEC, OSHA requirements for Class I, Division 1, Group C & D hazardous locations (temp. code T4). Cast 316 stainless steel (ASTM 48) wet end, no... [See More]
- Power Source: 208 / 230 / 460 / 575 V; AC
- Discharge Size: 2.000
- Liquid Flow: 105.0 to 192.0
- HP: 2.00 to 5.00
from KSB AG
Design. Long-coupled, single-stage volute casing pump in back pull-out design. Applications. Drainage, irrigation and water supply systems, handling of condensate, cooling water, service water, etc. Overview of technical data. Type of bearing. Ball bearings. Casing partition. Radially split. Drive... [See More]
- Power Source: AC
- HP: 1.61
- Discharge Pressure: 145.0
- Pump Housing Material: Cast Iron (optional feature); Stainless Steel (optional feature); Cast Duplex Steel
from Industrial Flow Solutions
Explosion proof, dual-shredding solids handling pump. FM -APPROVED EXPLOSION-PROOF for use in Class I, Division 1, Groups C & D Hazardous Locations. Patented dual-shredding RAD-AX ® (Radial + Axial) technology designed to cut, shred, shear to expedite flow. Designed to prevent clogs in... [See More]
- Power Source: 208 / 230 / 460 / 575, 3ph- 60 Hz; AC
- Discharge Size: 3.000
- Liquid Flow: 190.0 to 410.0
- HP: 2.00 to 5.00
from KSB AG
Design. Ready-to-connect package single or dual pumping station with PE-LLD (polyethylene) collecting tank for underground installation. Equipped with one or two Amarex N submersible waste water pumps, also available with explosion protection. Collecting tank design to DIN 1986-100 and EN 752 / EN... [See More]
- Power Source: AC
- HP: 5.63
- Liquid Flow: 220.1
- Pump Housing Material: Plastic; Polyethylene
from Industrial Flow Solutions
Explosion proof, shredding/ cutting pump. FM-approved EXPLOSION-PROOF, pump designed to tear, break, rip solids. Meets NFPA (70), NEC, OSHA requirements for Class I, Division 1, Group C & D hazardous locations (temp. code T4). Tungsten carbide-tipped impeller. Max solids from 1.6 ” –... [See More]
- Power Source: 208 / 230 / 460 / 575, 3ph- 60 Hz; AC
- Discharge Size: 3.000 to 6.000
- Liquid Flow: 220.0 to 900.0
- HP: 2.00 to 20.00
from KSB AG
Design. Wet-installed, submersible motor pump with axial propeller in ECB design for installation in discharge tubes, single-stage, single-entry, explosion protection to ATEX II G2 T3. Applications. Irrigation and drainage pumping stations, stormwater pumping stations, handling of raw and clean... [See More]
- Power Source: 230V to 460V, Three Phase, 480V to 690V, Three Phase; AC
- HP: 938.15
- Liquid Flow: 111.0
- Pump Housing Material: Cast Iron
from Industrial Flow Solutions
Explosion-proof, corrosion-resistant 316 stainless steel shredding/cutting solids handling pump. FM -APPROVED EXPLOSION-PROOF for use in Class I, Division 1, Groups C & D Hazardous Locations. Wear-resistant shredding and cutting system designed to tear, break, rip solids. Max solids 1.6 ”... [See More]
- Power Source: 208 / 230 / 460 / 575, 3ph- 60 Hz; AC
- Discharge Size: 3.000 to 4.000
- Liquid Flow: 270.0 to 900.0
- HP: 2.00 to 20.00