Electric / Resistance Furnaces (industrial)
from Isotech, Inc.
The Electra Series H &D furnace lines is a unique “piggy back ” design that provides a complete heat capability occupying minimal floor space. Two independent furnace chambers are provided. The top chamber is optimized for hardening operations while the lower chamber is optimized for... [See More]
- Heat Source: Electric / Resistance
- Configuration: Box (Muffle)
- Temperature Range: 649 to 1260
- Application: Industrial; Hardening, Draw Chambler
from Harper International Corporation
Harper ’s mesh belt conveyor furnaces and kilns are designed for the continuous processing of parts as well as advanced materials such as granular, powder, or particulate aggregates in high purity and specialty atmosphere environments at temperatures up to 2000 °C. Our experience with a... [See More]
- Heat Source: Combustion; Electric / Resistance; RF / Microwave / Dielectric
- Configuration: Belt; Continuous or Conveying
- Temperature Range: 2000
- Atmosphere: Controlled Atmospheres Including Flammables Gases, as Well as Multiple Atmospheres
from Inductotherm Group
The Acutrak ® Direct Electric Heat (DEH) System is an excellent furnace for aluminum melting. They are well suited for die casting operations, permanent mold casting and for foundries. Direct Electric Heat Technology provides faster, cleaner and more efficient melting of aluminum and other... [See More]
- Heat Source: Electric / Resistance
- Application: Foundry or Melting Furnace; Industrial
- Configuration: Top Loading
from Isotech, Inc.
Electra ’s Series Retort H &D is a modification and extension of the Series H &D furnace line to allow effective and economical use of inert protective atmospheres in the hardening chamber. The hardening chamber is fitted with a heavy gauge, corrugated alloy, gas-tight work chamber... [See More]
- Heat Source: Electric / Resistance
- Configuration: Box (Muffle)
- Temperature Range: 649 to 1149
- Atmosphere: Inert
from Harper International Corporation
At Harper, temperatures are not the only things rising to the challenge. Optimization of process parameters is critical prior to investment in thermal process equipment to ensure capability and quality requirements are achieved. Our rotary furnaces offer exceptional versatility, reliability, and... [See More]
- Heat Source: Electric / Resistance
- Height: 1550
- Temperature Range: 1200
- Width / Tube O.D.: 102
from Inductotherm Group
Lift-Swing Furnaces offer nonferrous and precious metal casters an easily installed, highly productive crucible melting system. When the charge in the first crucible is melted and ready to be poured, the induction coil assembly is raised, swung to the second crucible and lowered to start the new... [See More]
- Heat Source: Electric / Resistance
- Application: Foundry or Melting Furnace; Industrial
- Configuration: Top Loading
from Harper International Corporation
Harper ’s pusher furnaces and tunnel kilns are ideal for processes requiring precise control of temperature and atmosphere, for those with longer residence times that require exact control of the heat up rate of the product (temperature profile), and those with a lower gas/solid reaction. Our... [See More]
- Heat Source: Combustion; Electric / Resistance; RF / Microwave / Dielectric
- Atmosphere: Controlled Atmospheres Including Flammables Gases, as Well as Multiple Atmospheres
- Temperature Range: 2800
- Application: Drying; Firing / Sintering; Industrial; Calcination, Oxide Reduction, Carbonization, Solid-solid Reaction, Gas-solid Reaction, Purification, Metalizing, Debinding, Parts Processing
from Harper International Corporation
Every Harper rotary tube furnace is designed for the customer ’s unique specifications. We bring innovative solutions to designs for continuous processing of advanced materials such as granular, powder, or particulate aggregates in high purity and specialty atmosphere environments at... [See More]
- Heat Source: Combustion; Electric / Resistance; RF / Microwave / Dielectric
- Width / Tube O.D.: 76.2 to 1524
- Temperature Range: 3000
- Atmosphere: Air / Oxidizing; Controlled Atmospheres Including Flammables and Toxic Gases – Hydrogen, Nitrogen, Air, Oxygen, Ethylene, Methane, CO2, CO, Chlorine Gas
from Harper International Corporation
This revolutionary system concept facilitates high production rate in a single installation with the lowest cost of production and the greatest flexibility to alter material grain size and morphology. It features a pusher-style system with single muffle, externally heated by natural gas or electric... [See More]
- Heat Source: Combustion; Electric / Resistance
- Application: Industrial
- Temperature Range: 1100
from Harper International Corporation
Harper ’s patented vertical furnaces are our latest thermal processing innovation for a wide range of product feedstocks, particularly for materials requiring high temperature solid-solid and solid-gas reactions, such as carbides, nitrides, borides and refractory metal powders. This new system... [See More]
- Heat Source: Combustion; Electric / Resistance; RF / Microwave / Dielectric
- Application: Industrial
- Configuration: Continuous or Conveying
from L&L Special Furnace Co., Inc.
The JSC SERIES is an electric Bell/Shuttle Lift furnace with a bell type "top hat" alloy low dew point retort. The system normally includes one plug insulated base, one retort, one furnace, one separate insulated "parking" base, and an overhead hoist and shuttle system. The control system, alloy... [See More]
- Heat Source: Electric / Resistance
- Configuration: Bell/ Shuttle Lift Furnace
- Temperature Range: 1200
- Atmosphere: Air / Oxidizing (optional feature); Inert (optional feature); Reducing (optional feature); Salt Bath (optional feature)
from Despatch - ITW EAE
The Worlds Best Selling Metallization Furnace. Despatch CF Series metallization furnaces are designed for high throughput, ease of maintenance and consistent process repeatability ensuring consistently high yields and superior product quality. The infrared furnace has enhanced thermal process... [See More]
- Heat Source: Electric / Resistance
- Pressure Range: 60
- Temperature Range: ? to 1000
- Height: 1640
from Wisconsin Oven Corporation
What is a Drop Bottom Furnace?. The concept of a drop bottom is very simple, and its name is derived from the process. The product, often loaded in baskets or on a grid, is positioned under the oven and is attached to a lift mechanism. Theload is then lifted into the chamber and the doors, located... [See More]
- Heat Source: Combustion; Electric / Resistance; Indirect / Contact / Conduction (optional feature)
- Height: 1219
- Temperature Range: ? to 538
- Width / Tube O.D.: 1219
from Trent, Inc.
Maximum Temperature: 1850 °F / 1010 °C. Optional Elements to 2100 °F / 1149 °C. The TRENT Bell Furnace uses direct radiant heat to deliver a uniform blanket of heat to the workload. These furnaces are designed as a general purpose furnace used to heat large motors and transformers,... [See More]
- Heat Source: Electric / Resistance
- Height: 216
- Temperature Range: ? to 1010
- Width / Tube O.D.: 152
from L&L Kiln Mfg. Inc.
Handheld DynaTrol with Dynamic Zone Control, 4 preset programs, 6 user defined programs [See More]
- Heat Source: Electric / Resistance
- Height: 686
- Temperature Range: 250 to 1290
- Width / Tube O.D.: 895
from Isotech North America
The Isotech Low Temperature Fixed Point Furnace is designed specifically to realize and maintain the freeze plateau of Isotech Indium, Tin and Zinc Fixed Point Cells, for calibration of thermometers on the International Temperature Scale of 1990. The Low Temperature Furnace is a single-zone furnace. [See More]
- Heat Source: Electric / Resistance
- Height: 960
- Temperature Range: 50 to 500
- Width / Tube O.D.: 600
from L&L Special Furnace Co., Inc.
The B86 Bench furnace is an excellent general purpose bench mounted box furnace. The door is a simple horizontal single pivoted door with a clamping latch. Elements are located on the sides in two element plates. The furnace features a digital PID tuning control for automatic temperature control. It... [See More]
- Heat Source: Electric / Resistance
- Height: 203
- Temperature Range: 1100
- Width / Tube O.D.: 241
from Despatch - ITW EAE
Despatch RAF furnaces feature horizontal recirculating air flow to ensure exceptional temperature uniformity of ±5.6°C at 538°C. These high performance furnaces deliver temperatures up to 538°C (1000°F) and are great for such processes as annealing, aging, stress relieving and other process critical... [See More]
- Heat Source: Electric / Resistance
- Height: 508
- Temperature Range: 40 to 538
- Width / Tube O.D.: 457
from Wisconsin Oven Corporation
Heat treat ovens are very common in the heat treat industry and are commonly referred to as Companion Draw Furnaces or Draw Batch Furnace. Wisconsin Oven offers 40 standard SDB heat treat oven models. Ten (10) standard sizes. Four (4) temperature ranges. Standard maximum continuous temperature... [See More]
- Heat Source: Combustion; Electric / Resistance; Indirect / Contact / Conduction (optional feature); Natural Gas
- Vacuum / Pressure Range: Elevated or Positive Pressures (> 760 torr)
- Temperature Range: 427 to 760
- Height: 457 to 1524
from Trent, Inc.
The TRENT M2-DKR High Temperature Furnace heating elements are silicon carbide type resistors located beneath a ceramic hearth plate, which protects against scale and breakage. The door is vertical lift counterweighted to provide a tight seal with the brick-lined furnace front. It is designed to be... [See More]
- Heat Source: Electric / Resistance
- Height: 127
- Temperature Range: ? to 1371
- Width / Tube O.D.: 203
from L&L Kiln Mfg. Inc.
The Easy-Load Professional-Grade Front-Loading Kiln meets the needs of schools, studios and potters who need a well-built easy-to-load cone 10 kiln. The proven technology of the Dyna-Trol Program Control automates the firing process. The even element spacing and built in standard zone control ensure... [See More]
- Heat Source: Electric / Resistance
- Height: 914
- Temperature Range: 250 to 1290
- Width / Tube O.D.: 635
from Isotech North America
The Isotech Medium Temperature Furnace is designed specifically to realize and maintain the freeze plateau of Isotech Indium, Tin, Zinc and Aluminum Cells, for the calibration of thermometers on ITS-90. It can also be used with an insert, as an annealing facility of the highest order for SPRT's or... [See More]
- Heat Source: Electric / Resistance
- Height: 960
- Temperature Range: 50 to 700
- Width / Tube O.D.: 600
from L&L Special Furnace Co., Inc.
The GS1714 is an excellent product for use in many applications. The control is a remarkably powerful multi-program control, the four sides of elements makes for a very even heating, the door is very easy to operate and the chamber is a very useful size - all for a very low price. These are built in... [See More]
- Heat Source: Electric / Resistance
- Height: 305
- Temperature Range: 1287
- Width / Tube O.D.: 432
from Despatch - ITW EAE
Safire ™ Dual Chamber Firing Furnace with DriTech ™ Dryer. The tools you need for process perfection. The Safire ™ is built on the foundation of process separation, stability, high uptime and the ability to tailor thermal profiles around advanced materials and architectures. Safire... [See More]
- Heat Source: Electric / Resistance
- Pressure Range: 60
- Temperature Range: 1100
- Height: 2469
from Trent, Inc.
Maximum Temperature: 1850 °F / 1010 °C. Optional Elements to 2150 °F / 1177 °C. The TRENT H Series Box Furnaces are used for heat-treating ferrous and non-ferrous metals, firing ceramics, annealing glassware, processing chemicals and for general research purposes. TRENT Folded and... [See More]
- Heat Source: Electric / Resistance
- Height: 305
- Temperature Range: ? to 1010
- Width / Tube O.D.: 229
from L&L Kiln Mfg. Inc.
L&L Kiln Mfg., Inc. announces the development of a line of large industrial-grade Bell-Lift kilns designed for industrial ceramics and other industrial applications. The first model is 100 cubic feet (66" wide by 48" deep by 54" high). Larger and smaller models can be built. The kiln reaches 2350... [See More]
- Heat Source: Electric / Resistance
- Height: 1372
- Temperature Range: 250 to 1290
- Width / Tube O.D.: 1676
from L&L Special Furnace Co., Inc.
The CBH 124 box furnace is specifically designed for neutral hardening. In the basic model with inert atmosphere some decarburization will be experienced because "inert" atmosphere is not totally neutral with regards to most carbon steels. The higher the carbon level of the steel the less... [See More]
- Heat Source: Electric / Resistance
- Height: 470
- Temperature Range: 1230
- Width / Tube O.D.: 432
from Trent, Inc.
Maximum Temperature: 1900 °F / 1083 °C. The TRENT HM Muffle design box furnace is a small atmosphere furnace used for tool hardening, low-temperature brazing, bright annealing, general metal heat-treating and other processes requiring a controlled atmosphere up to 1900 °F. TRENT Folded... [See More]
- Heat Source: Electric / Resistance
- Height: 305
- Temperature Range: ? to 1010
- Width / Tube O.D.: 229
from L&L Special Furnace Co., Inc.
The CB Series box furnaces are specifically designed for carburizing atmosphere flow control systems. They have a normal maximum temperature of 1850 °F (1010 °C.) [See More]
- Heat Source: Electric / Resistance
- Height: 610
- Temperature Range: 1010
- Width / Tube O.D.: 610
from Trent, Inc.
Maximum Temperature in Air Atmosphere: 2750 °F / 1510 °C. In Reducing Atmosphere: 2500 °F / 1371 °C. TRENT's Silicon Carbide Rod Element Furnace is heavy duty throughout. The insulation is one layer of high temperature brick, backed by slab-type, lower temperature insulating layers. [See More]
- Heat Source: Electric / Resistance
- Height: 254
- Temperature Range: ? to 1510
- Width / Tube O.D.: 203
from L&L Special Furnace Co., Inc.
The QD 29 Dual Chamber Heat Treating furnace features a 2275 °F (1245 °C) high heat chamber for hardening and a 1250 °F (675 °C) recirculating oven for tempering. The over/under configuration saves floor space. The hardening furnace is mounted on top with the tempering oven... [See More]
- Heat Source: Electric / Resistance
- Height: 203
- Temperature Range: 675 to 1245
- Width / Tube O.D.: 305
from Trent, Inc.
Used for carbon determination in steel and other combustion analyses, this furnace has a refractory tube with a heating coil. The ends of the furnace are made of insulating brick held firm by steel casing. The outer casing is steel. The distance from the center of the furnace to the base is 10". [See More]
- Heat Source: Electric / Resistance
- Width / Tube O.D.: 31.75
- Temperature Range: ? to 1093
- Length: 305
from L&L Special Furnace Co., Inc.
The QDG 29 Dual Chamber Heat Treating furnace features a 2500 °F (1370 °C) high heat chamber for hardening and a 1875 °F (1025 °C) recirculating oven for preheating and tempering. The over/under configuration saves floor space. The hardening furnace is mounted on the bottom with... [See More]
- Heat Source: Electric / Resistance
- Height: 457
- Temperature Range: 1025 to 1370
- Width / Tube O.D.: 432
from Trent, Inc.
The TRENT HL Bench Style Furnace has heating elements on all four sides of the furnace chamber and a hearth plate made of silicon carbide. The overlapping, plug-type door provides fast action. [See More]
- Heat Source: Electric / Resistance
- Height: 133
- Temperature Range: ? to 1093
- Width / Tube O.D.: 210
from L&L Special Furnace Co., Inc.
The FB Series Electric Box Furnaces are a general purpose ceramic fiber lined electric box furnace. They achieve high precision by featuring highly accurate controls, mercury contactors for fast cycle times, two zone control (top and bottom), and even spacing of elements. They reach temperatures up... [See More]
- Heat Source: Electric / Resistance
- Height: 914
- Temperature Range: 1200
- Width / Tube O.D.: 914
from Trent, Inc.
Used for heat treating small quantities of material, ash determination, melting of white metal and for thermocouple calibration. TRENT Pit or Crucible furnaces have heating elements wound on a spiral form. The cover can be drilled for insertion of a thermometer or thermocouple. [See More]
- Heat Source: Electric / Resistance
- Width / Tube O.D.: 88.9
- Temperature Range: ? to 1093
- Length: 127
from L&L Special Furnace Co., Inc.
The FN Series Electric Box Furnaces feature extremely uniform temperature gradients over a wide temperature range, and atmosphere tight construction. Two uniformity ranges are offered: +/-10 °F (+/-5 °C) and +/-5 °F (+/-3 °C). Several important features are combined to achieve... [See More]
- Heat Source: Electric / Resistance
- Height: 610
- Temperature Range: 150 to 1200
- Width / Tube O.D.: 610
from Trent, Inc.
Maximum Temperature: 1000 °F / 538 °C. Used to melt lead and babbitt. TRENT Stationary Melting Pots - MB Series are fabricated from 1/2" thick steel or heavier using welded steel construction. TRENT Folded and Formed ® heating elements are mounted to the inner casing walls with grooved... [See More]
- Heat Source: Electric / Resistance
- Height: 171
- Temperature Range: ? to 538
- Width / Tube O.D.: 194
from L&L Special Furnace Co., Inc.
The FS Series Shuttle Envelope Kilns are primarily designed for the firing of ceramic ware. Each furnace system includes two fixed stationary bases and a moving kiln that "shuttles" between the two bases. The stationary bases provide a stable platform for loading delicate ceramics. The base is easy... [See More]
- Heat Source: Electric / Resistance
- Height: 1219
- Temperature Range: 1200
- Width / Tube O.D.: 762
from Trent, Inc.
Maximum Temperature: 1000 °F / 538 °C. Used to melt lead and babbitt. TRENT Stationary Melting Pots - MT Series are fabricated from 1/2" thick steel or heavier using welded steel construction. TRENT Folded and Formed ® heating elements are mounted to the inner casing walls with grooved... [See More]
- Heat Source: Electric / Resistance
- Height: 381
- Temperature Range: ? to 538
- Width / Tube O.D.: 381
from L&L Special Furnace Co., Inc.
The GF SERIES Electric Furnaces feature 2800 °F (1535 °C) operation. Silicon carbide elements are controlled with a phase angle fired SCR. The door features a deep plug for minimal heat loss around the door. Because this door must be opened horizontally the furnace can not be loaded and... [See More]
- Heat Source: Electric / Resistance
- Height: 457
- Temperature Range: 1535
- Width / Tube O.D.: 610
from Trent, Inc.
Maximum Temperature: 1850 °F / 1010 °C. The TRENT Pit Type Furnace is used for heat treating ferrous and non-ferrous metals, firing ceramics, annealing glassware, processing chemicals, etc. it has maximum temperature of 1850 °F with a 2150 °F intermittent rating on request. This... [See More]
- Heat Source: Electric / Resistance
- Width / Tube O.D.: 356
- Temperature Range: ? to 1010
- Length: 610
from L&L Special Furnace Co., Inc.
The GHE SERIES Ultra High Temperature Bottom Loading Elevator Furnaces feature lightweight ultra high temperature ceramic fiber insulation system for fast heat up and low BTU input requirements. The load is placed on an elevator that moves up into the bottom of the fixed furnace. Elements on all... [See More]
- Heat Source: Electric / Resistance
- Height: 305
- Temperature Range: 1700
- Width / Tube O.D.: 305
from Trent, Inc.
Maximum Temperature: 1700 °F / 927 °C. The TRENT Pot Furnaces are used in the metalworking industry for lead and case hardening, drawing, tempering, annealing, brazing, pre-heating and carbonizing. Vessels are available in three types: • Fabricated Steel - 900 °F. • Nickel... [See More]
- Heat Source: Electric / Resistance
- Height: 152
- Temperature Range: ? to 927
- Width / Tube O.D.: 127
from L&L Special Furnace Co., Inc.
The GHH SERIES Ultra High Temperature Front Loading Box Furnaces feature a unique lightweight ultra high temperature ceramic fiber insulation system for fast heat up and low BTU input requirements. The GHH series achieves 3100 °F (1700 °C) under continuous operation. The insulation system,... [See More]
- Heat Source: Electric / Resistance
- Height: 305
- Temperature Range: 1700
- Width / Tube O.D.: 305
from Trent, Inc.
PCT Series Maximum Temperature: 600 °F / 316 °C. LRT Series Maximum Temperature: 800 °F / 427 °C. TRENT Solder and Tinning Troughs answer the demand for heavy-duty equipment capable of precision control. These troughs all employ the same basic design regardless of their size or type... [See More]
- Heat Source: Electric / Resistance
- Height: 50.8
- Temperature Range: ? to 316
- Width / Tube O.D.: 305
from L&L Special Furnace Co., Inc.
The GL SERIES Electric Silicon Carbide Element Bench Mounted Furnaces feature true continuous 2500 °F (1370 °C) operation. This is ideally suited for applications where temperatures between 2000 °F (1095 °C) and 2500 °F need to be reached under normal operating conditions... [See More]
- Heat Source: Electric / Resistance
- Height: 203
- Temperature Range: 1370
- Width / Tube O.D.: 279
from Trent, Inc.
Maximum Temperature: 1400 °F / 760 °C. The TRENT Vertical Retort Furnace has the same design as the PF Series Pot Type furnace except that a high alloy gas retort is substituted for the salt pot. It is used primarily in the metalworking industry for sintering, brazing, annealing, etc. [See More]
- Heat Source: Electric / Resistance
- Height: 457
- Temperature Range: ? to 760
- Width / Tube O.D.: 457
from L&L Special Furnace Co., Inc.
The GLF SERIES Electric Silicon Carbide Element Floor Standing Furnaces feature continuous 2500 °F (1370 °C) operation. This is ideally suited for applications where temperatures between 2000 °F (1095 °C) and 2500 °F need to be reached under normal operating conditions... [See More]
- Heat Source: Electric / Resistance
- Height: 457
- Temperature Range: 1370
- Width / Tube O.D.: 610
from Trent, Inc.
Maximum Temperature: 1700 °F / 927 °C. The TRENT Trough Furnaces have the same basic design as the PF Series Pot Type furnaces. A one-piece manually operated cover is standard equipment and the cover is mounted on rollers for easy opening and closing. The cover is filled with brick and... [See More]
- Heat Source: Electric / Resistance
- Height: 330
- Temperature Range: ? to 927
- Width / Tube O.D.: 330
from L&L Special Furnace Co., Inc.
The HB Bench furnaces are good general purpose bench mounted box furnaces. The door is an easy to operate spring loaded vertical plug door. Elements are located on the sides. They feature a digital PID tuning control for automatic temperature control. They reach 2200 °F (1200 °C) with the... [See More]
- Heat Source: Electric / Resistance
- Height: 203
- Temperature Range: 1200
- Width / Tube O.D.: 305
from Trent, Inc.
Maximum Temperature: 2000 °F / 1093 °C. The TRENT Vertical Retort Furnace has the same design as the PF Series Pot Type furnace except that a high alloy gas retort is substituted for the salt pot. It is used primarily in the metal working industry for sintering, brazing, annealing, etc.. [See More]
- Heat Source: Electric / Resistance
- Width / Tube O.D.: 203
- Temperature Range: ? to 1093
- Length: 229
from L&L Special Furnace Co., Inc.
The QD Series Dual Chamber Heat Treating furnaces feature a 2350 °F (1285 °C) high heat chamber for hardening and a 1250 °F (675 °C) recirculating oven for tempering. The over/under configuration saves floor space. The hardening furnace is mounted on top with the tempering oven... [See More]
- Heat Source: Electric / Resistance
- Height: 533
- Temperature Range: 675 to 1285
- Width / Tube O.D.: 635
from Trent, Inc.
Maximum Temperature: 1000 °F / 538 °C. Used to melt aluminum and zinc. TRENT Aluminum and Zinc Melting Furnaces are specially designed for these hard-to-handle metals. The pots are fabricated from 1-1/4" thick steel using welded steel construction. TRENT Folded and Formed ® heating... [See More]
- Heat Source: Electric / Resistance
- Height: 813
- Temperature Range: ? to 760
- Width / Tube O.D.: 610
from L&L Special Furnace Co., Inc.
The QDS Series Dual Chamber Heat Treating furnaces feature a 2350 °F (1285 °C) high heat chamber for hardening and a 1250 °F (675 °C) recirculating oven for tempering. The over/under configuration saves floor space. The hardening furnace is mounted on top with the tempering oven... [See More]
- Heat Source: Electric / Resistance
- Height: 305
- Temperature Range: 675 to 1285
- Width / Tube O.D.: 330
from L&L Special Furnace Co., Inc.
The QT Series quench tanks are used for the uniform quenching of hot steels. They may be used with water, light weight polymer, or oil. They are not designed for use with brine. Water or polymer must have rust inhibitors (or else tank must be stainless steel.) Special versions are available for very... [See More]
- Heat Source: Electric / Resistance
- Height: 305
- Temperature Range: 50 to 60
- Width / Tube O.D.: 610
from L&L Special Furnace Co., Inc.
The TB SERIES Bench Mounted Electric Tube Furnaces feature even heating around the perimeter of the tube, ceramic fiber insulation, and split tube construction for easy changing of the tubes. A variety of tubes may be used or supplied by L&L depending on the application. The sizes listed in the... [See More]
- Heat Source: Electric / Resistance
- Width / Tube O.D.: 381
- Temperature Range: 1150
- Length: 305
from L&L Special Furnace Co., Inc.
The TBU SERIES Bench Mounted Electric Three Zone Tube Furnaces utilize three separate heating zones to achieve +/-5 °F (+/-2.7 °C) or better within the center zone over a wide temperature range. The two end zones compensate for end heat losses. They are ideally suited for laboratory and... [See More]
- Heat Source: Electric / Resistance
- Width / Tube O.D.: 2083
- Temperature Range: 1150
- Length: 1829
from L&L Special Furnace Co., Inc.
The XLB furnaces achieve high precision by featuring highly accurate digital PID controls, mercury contactors for fast cycle times, two zone control (top and bottom), and very even spacing of elements. They reach 2350 °F (1285 °C) with the standard iron-aluminum-chrome elements or 2100... [See More]
- Heat Source: Electric / Resistance
- Height: 12
- Temperature Range: 1285
- Width / Tube O.D.: 330
from L&L Special Furnace Co., Inc.
The XLC SERIES Atmosphere Retort Furnaces represent an advanced design which emphasizes process quality and control as well as operator safety. The control system, alloy retort and flow system are completely integrated as one unified system. Any application requiring 100% hydrogen or a mix of... [See More]
- Heat Source: Electric / Resistance
- Height: 457
- Temperature Range: 1200
- Width / Tube O.D.: 457
from L&L Special Furnace Co., Inc.
The XLE Series are highly uniform and controllable electric box furnaces widely adaptable to many applications. In the heat treating field these include hardening, neutral hardening, solution heat treating, stress relieving, annealing, aging, precipitation hardening, and tempering. In the ceramic... [See More]
- Heat Source: Electric / Resistance
- Height: 686
- Temperature Range: 1288
- Width / Tube O.D.: 635
from L&L Special Furnace Co., Inc.
The XLG furnaces are multi-purpose gas fired box furnaces. They are highly uniform in temperature and feature accurate digital controls and multiple medium or high velocity Eclipse "Thermjet" proportionally controlled burners with an independent combustion blower. The XLG furnaces can be rated as... [See More]
- Heat Source: Electric / Resistance
- Height: 610
- Temperature Range: 1315
- Width / Tube O.D.: 914