Specialty / Other Wire Rope and Mechanical Cable
from Certex UK
Excellent Resistance to Rotation giving over three times more lifting height than a conventional 18 x 7 class rope. Flexibility is optimised by the unique strand and rope construction. Langs Lay construction combines excellent wear characteristics with efficient spooling on the drum. Standard: EN... [See More]
- Strength: 17444
- End Fittings: None (Bare Cable)
- Diameter: 0.3937
- Material: Steel; Galvanized; High Carbon Steel
from Certex UK
Designed for tough working environments it excels where damage is an issue. The oval geometry of the strands allows for optimised distribution of pressure on drum and sheaves, resulting in reduced wear and abrasion. Standard: EN 12385-4. ISO 4309 Rope Category No: All Diameters RCN.06 [See More]
- Strength: 26751
- Strands: 8
- Diameter: 0.4724
- End Fittings: None (Bare Cable)
from Certex UK
Excellent Resistance to Rotation giving over three times more lifting height than a conventional 18 x 7 class rope. Flexibility is optimised by the unique strand and rope construction. Langs Lay construction combines excellent wear characteristics with efficient spooling on the drum. RopeTex Ropes... [See More]
- Diameter: 0.3937
- Material: Steel; Galvanized; High Carbon Steel
- End Fittings: None (Bare Cable)
- Application: Power and Public Utility
from Certex UK
Low Elongation - giving significantly lower stretch than conventional strand. The requirement to prestress the strand is virtually eliminated due to the excellent Modulus Value of the Rope more than 30% higher than Conventional Strand. Exceptional Breaking Force - Incorporating strand compaction... [See More]
- Strength: 21536
- Strands: 1
- Diameter: 0.3937
- End Fittings: None (Bare Cable)
from Certex UK
Typical applications: Wire rope for rigging, stays and controls. Design: Right- or left-handed. [See More]
- Strength: 184
- Strands: 1
- Diameter: 0.0394
- End Fittings: None (Bare Cable)
from Certex UK
Typical applications: Cranes, hoist blocks, lifts, wire rope slings. [See More]
- Strength: 10835
- Strands: 6
- Diameter: 0.3937
- End Fittings: None (Bare Cable)
from Certex UK
Steel wire rope 6x19 WSC in stainless steel is a good choice for basic lifting applications in environments where corrosion resistance is important. It is equipped with a Wire Strand Core (WSC) which gives the rope a good strength and a reasonable balance between fatigue and wear resistance. Can be... [See More]
- Strength: 12769
- Strands: 6
- Diameter: 0.3937
- End Fittings: None (Bare Cable)
from Certex UK
ROPETEX S19 is a stainless steel wire rope. It's very corrosion resistant and durable, well suited for marine applications. The S19 rope has very little stretch which makes is excellent for standing rigging, stays, controls and architectural balustrades and green walls. ROPETEX S19 can be provided... [See More]
- Strength: 187
- Strands: 1
- Diameter: 0.0394
- End Fittings: None (Bare Cable)
from Certex UK
Steel wire rope ROPETEX S33 in stainless steel is a good choice for basic lifting applications in environments where corrosion resistance is important. ROPETEX S33 is equipped with a Wire Strand Core (WSC) which gives the rope a good strength and a reasonable balance between fatigue and wear... [See More]
- Strength: 12769
- Strands: 6
- Diameter: 0.3937
- End Fittings: None (Bare Cable)
from Certex UK
ROPETEX S49 in stainless steel is a wire rope often used as stay rope, st ående rigning, hanging signs, and fencing rope. Due to it's high quality stainless steel material grade it has an excellent corrosion resistance. It's most used in small diameters up to 12 mm. ROPETEX S49 is equipped with... [See More]
- Strength: 137
- Strands: 6
- Diameter: 0.0394
- End Fittings: None (Bare Cable)
from Certex UK
Ropetex S65 is a stainless steel rope, the most commonly used range is from 8 to 38 mm. It can be used for cranes, hoists, slings and a wide range of various other applications. Ropetex S65 is equipped with an Independent Wire Rope Core (IWRC) which gives it a high breaking strength and... [See More]
- Strength: 12589
- Strands: 6
- Diameter: 0.3937
- End Fittings: None (Bare Cable)
from Certex UK
Also available in Warrington construction (6 &6/6/1). Excellent stretch characteristics [See More]
- Strength: 11128
- Strands: 6
- Diameter: 0.3937
- End Fittings: None (Bare Cable)
from Certex UK
Higher strength. Lower stretch. Uniform diameter. Good diameter retention. Improved fatigue performance. Tolerance more than 10 mm: 0% - +5%. Tolerance less than 10 mm: 0% - +6% [See More]
- Strength: 13151
- Strands: 8
- Diameter: 0.3937
- End Fittings: None (Bare Cable)
from Certex UK
Very Low Rotation. Superior bending fatigue life when compared with conventional low rotation ropes. Excellent resistance to crushing and abrasion particuarly on multi layer drums resulting from the compacted strands. Reduced elongation results from increased steel content and the Dyform process. [See More]
- Strength: 20412
- End Fittings: None (Bare Cable)
- Diameter: 0.3937
- Material: Steel; Galvanized; High Carbon Steel
from Certex UK
Very Low Rotation. Superior bending fatigue life when compared with conventional low rotation ropes. Excellent resistance to crushing and abrasion particuarly on multi layer drums resulting from the compacted strands. Reduced elongation results from increased steel content and the Dyform process. [See More]
- Strength: 20412
- End Fittings: None (Bare Cable)
- Diameter: 0.3937
- Material: Steel; Galvanized; High Carbon Steel
from Certex UK
Superior bending fatigue life when compared with conventional six strand crane ropes. Excellent resistance to crushing and abrasion particularlyon multi-layer coiling resulting from the Dyform strands. Reduced elongation results from increased steel content and the Dyform process. Optional plastic... [See More]
- Strength: 18613
- Strands: 6
- Diameter: 0.3937
- End Fittings: None (Bare Cable)
from Certex UK
Superior bending fatigue life when compared with conventional six strand crane ropes. Excellent resistance to crushing and abrasion particuarly on multi layer coiling resulting from the Dyform strands. Reduced elongation results from increased steel content and the Dyform process. Plastic... [See More]
- Strength: 18613
- Strands: 6
- Diameter: 0.3937
- End Fittings: None (Bare Cable)
from Certex UK
Superior bending fatigue life when compared with other conventional eight strand ropes. Excellent resistance to crushing and abrasion particularly on multi layer coiling resulting from the Dyform strands. Reduced elongation results from increased steel content and the Dyform process. Optional... [See More]
- Strength: 19827
- Strands: 8
- Diameter: 0.3937
- End Fittings: None (Bare Cable)
from Certex UK
Dyform Bristar 8 is a high performance compacted single layer constructed rope which incorporates an engineered extruded plastic profile between the 8 outer strands and the rope core for cranes and industrial applications including mobile, crawler and tower cranes. Standard: EN 12385-4. ISO 4309... [See More]
- Strength: 119369
- Strands: 8
- Diameter: 0.9449
- End Fittings: None (Bare Cable)
from Pivot Point, Inc.
Bulk aircraft cable cut to length or on spools is available from stock in galvanized steel or stainless steel, bare or coated. Construction is 7 x 7 aircraft quality for strength and flexibility. Save yourself the hassle of making assemblies in house and ask us for a quote on complete Steel Lanyard... [See More]
- Strength: 1700
- End Fittings: None (Bare Cable)
from Loos & Co., Inc.
Zinc die cast fittings perform just as well as traditional fittings in most applications. They hold cable breaking strength when properly designed and manufactured. Intricate designs and threads allow for better performance than many more expensive machined parts. By eliminating secondary operations... [See More]
- Diameter: 0.1560
- End Fittings: Ball
- Type: Wire Rope or Cable with Attached Fittings
- Material: Galvanized; Zinc Alloy, Zamak 5
from Pivot Point, Inc.
Nylon Lanyards ™ keep pins, fasteners and other components where they belong! This low cost tether is an alternative to steel cable lanyards or stainless steel cable lanyards and offers light-duty retention and loss prevention. The U-Lock style of Nylon Lanyards ™ offers one end with a... [See More]
- Strength: 35
- Length: 10
- Diameter: 0.0930
- End Fittings: None (Bare Cable)
from Pivot Point, Inc.
Nylon Lanyards ™ keep pins, fasteners and other components where they belong! This low cost tether is an alternative to steel cable lanyards or stainless steel cable lanyards and offers light-duty retention and loss prevention. The U-Lock style of Nylon Lanyards ™ offers one end with a... [See More]
- Strength: 35
- Material: ST801 Zytel Nylon
- End Fittings: None (Bare Cable)
from Pivot Point, Inc.
Pivot Point manufactures high-quality Steel Cable Lanyards and Stainless Steel Cable Lanyards. Lanyard Assemblies are offered in 3/64" to 1/8" cable diameter for light duty retention. These lanyards are made from durable aircraft cable and are typically attached to pins and other fasteners to... [See More]
- Strength: 215
- End Fittings: None (Bare Cable)
from Pivot Point, Inc.
Pivot Point manufactures high-quality Steel Cable Lanyards and Stainless Steel Cable Lanyards. Lanyard Assemblies are offered in 3/64" to 1/8" cable diameter for light duty retention. These lanyards are made from durable aircraft cable and are typically attached to pins and other fasteners to... [See More]
- Strength: 215
- End Fittings: None (Bare Cable)
from Pivot Point, Inc.
Pivot Point manufactures high-quality Steel Cable Lanyards and Stainless Steel Cable Lanyards. Lanyard Assemblies are offered in 3/64" to 1/8" cable diameter for light duty retention. These lanyards are made from durable aircraft cable and are typically attached to pins and other fasteners to... [See More]
- Strength: 215
- End Fittings: None (Bare Cable)