Disc Pneumatic Brakes
from Hilliard Corporation (The)
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc... [See More]
- Configuration: Disc
- Engagement: Friction
- Pneumatic Pressure: 66
- Operation: Spring Return / Disengage
from Branham, W.C. Inc.
Single and Double Acting Caliper Disc Brakes Dynamic Torque (inch/lb) 288 lbf per 100 psi x Braking Radius 8.0 sq. in. Total Friction Pad Area < 16 Disc Diameter Range, in. [See More]
- Configuration: Disc
- Bore Diameter: 1.62
- Pneumatic Pressure: 200
- Length: 0.16 to 0.50
from Hilliard Corporation (The)
The A400 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The 400 requires a minimum disc... [See More]
- Configuration: Disc
- Engagement: Friction
- Pneumatic Pressure: 67
- Operation: Spring Return / Disengage
from Branham, W.C. Inc.
Unlimited Disc Series. We've Redesigned the Popular 200 Series to Fit on Disc Diameters of 16 inches and Larger. Fits on Flat Linear Plates Too. Dynamic Torque (inch/lb) 288 lbf per 100 psi x Braking Radius Single Live Side, Floating Mount Use With Unlimited Disc Diameter 8.0 sq. in. Total Friction... [See More]
- Configuration: Disc
- Bore Diameter: 1.62
- Pneumatic Pressure: 200
- Length: 0.16 to 0.75
from Hilliard Corporation (The)
The Hilliard A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a... [See More]
- Configuration: Disc
- Engagement: Friction
- Pneumatic Pressure: 66 to 80
- Operation: Spring Return / Disengage
from Branham, W.C. Inc.
Single and Double Acting Caliper Disc Brakes Dynamic Torque (inch/lb) 70 lbf per 100 psi x Braking Radius 2.0 sq. in. Total Friction Pad Area Unlimited Disc Diameter Range [See More]
- Configuration: Disc
- Bore Diameter: 1.12
- Pneumatic Pressure: 200
- Length: 0.16 to 0.50
from Hilliard Corporation (The)
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc... [See More]
- Configuration: Disc
- Engagement: Friction
- Pneumatic Pressure: 90
- Operation: Spring Actuation / Engage
from Branham, W.C. Inc.
Single and Double Acting Pneumatic Caliper Disc Brakes Dynamic Torque (inch/lb) 144 lbf per 100 psi x Braking Radius 4.0 sq. in. Total Friction Pad Area Unlimited Disc Diameter Range [See More]
- Configuration: Disc
- Bore Diameter: 1.62
- Pneumatic Pressure: 200
- Length: 0.16 to 0.50
from Hilliard Corporation (The)
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc... [See More]
- Configuration: Disc
- Engagement: Friction
- Pneumatic Pressure: 95
- Operation: Spring Actuation / Engage
from Branham, W.C. Inc.
Single and Double Acting Caliper Disc Brakes Dynamic Torque (inch/lb) 352.5 lbf per 100 psi x Braking Radius 9.14 sq. in. Total Friction Pad Area > 12 Disc Diameter Range, in. [See More]
- Configuration: Disc
- Bore Diameter: 2.5
- Pneumatic Pressure: 200
- Length: 0.25 to 1.12
from Hilliard Corporation (The)
The A400 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The 400 requires a minimum disc... [See More]
- Configuration: Disc
- Engagement: Friction
- Pneumatic Pressure: 110
- Operation: Spring Actuation / Engage
from Branham, W.C. Inc.
Double Acting, Spring Retractable Pistons Dynamic Torque (inch/lb) 693 lbf per 100 psi x Braking Radius 19.24 sq. in. Total Friction Pad Area > 14 inch Disc Diameter Range 1500 PSI (103 Bar) Maximum Pressure [See More]
- Configuration: Disc
- Bore Diameter: 3.5
- Pneumatic Pressure: 200
- Length: 0.25 to 1.12
from Hilliard Corporation (The)
The A400 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The 400 requires a minimum disc... [See More]
- Configuration: Disc
- Engagement: Friction
- Pneumatic Pressure: 106
- Operation: Spring Actuation / Engage
from Branham, W.C. Inc.
Double Acting Caliper Disc Brake With Quick Change PadsDynamic Torque (inch/lb): 693 lbf per 100 psi x Braking Radius 21.96 sq. in. Total Friction Area 12 - 18-inch Disc Diameter Range [See More]
- Configuration: Disc
- Bore Diameter: 3.5
- Pneumatic Pressure: 200
- Length: 0.50 to 0.75
from Branham, W.C. Inc.
Used for Emergency Stop & Holding Applications. 85 PSI (5.9 Bar) Release Pressure. Dual Belleville Disc Spring Stacks | 929 lb. (4132 N) Tangential Force at zero friction pad wear | 6626 in. lbs. F. using 16-inch disc diameter at maximum tangential force | 2065 lb. clamping force | Up to 16-inch... [See More]
- Configuration: Disc
- Length: 0.16 to 0.75
from Branham, W.C. Inc.
Unlimited Disc Series. Used for Emergency Stop & Holding Applications. 85 PSI (5.9 Bar) Release Pressure. Dual Belleville Disc Spring Stacks | 929 lb. (4132 N) Tangential Force at zero friction pad wear | 13,129 in. lbs. F. using 30-inch disc diameter at maximum tangential force | 2065 lb. clamping... [See More]
- Configuration: Disc
- Length: 0.16 to 1.12
from Branham, W.C. Inc.
Extended Pad Unlimited Disc Series. Used for Emergency Stop & Holding Applications. 85 PSI (5.9 Bar) Release Pressure. Dual Belleville Disc Spring Stacks | 929 lb. (4132 N) Tangential Force at zero friction pad wear | 13,129 in. lbs. F. using 30-inch disc diameter at maximum tangential force | 2065... [See More]
- Configuration: Disc
- Length: 0.16 to 1.12
from Branham, W.C. Inc.
Used for Emergency Stop & Holding Applications. 85 PSI (5.9 Bar) Release Pressure. Single Belleville Disc Spring Stack | 216 lb. (960 N) Tangential Force at zero friction pad wear | 3350 in. lbs. F. using 30-inch disc diameter at maximum tangential force | 480 lb. clamping force | Unlimited disc... [See More]
- Configuration: Disc
- Length: 0.16 to 0.50
from Branham, W.C. Inc.
Used for Emergency Stop & Holding Applications. 100 PSI (6.9 Bar) Release Pressure. Dual Belleville Disc Spring Stacks | 1859 lb. (8269 N) Tangential Force at zero friction pad wear | 35,568 in. lbs. F. using 40-inch disc diameter at maximum tangential force | 4130 lb. clamping force | From 12 inch... [See More]
- Configuration: Disc
- Length: 0.16 to 1.12
from Branham, W.C. Inc.
Extended Pad Unlimited Disc Series. Used for Emergency Stop & Holding Applications. 100 PSI (6.9 Bar) Release Pressure. Dual Belleville Disc Spring Stacks | 1859 lb. Tangential Force at zero friction pad wear | 35,568 in. lbs. F. using 40 inch disc diameter at maximum tangential force | 4130 lb. [See More]
- Configuration: Disc
- Length: 0.19 to 1.12
from Branham, W.C. Inc.
Used for Emergency Stop & Holding Applications. 85 PSI (5.9 Bar) Release Pressure. Single Belleville Disc Spring Stack | 465 lb. (2068 N) Tangential Force at zero friction pad wear | 6570 in. lbs. F. using 30 inch disc diameter at maximum tangential force | 1033 lb. clamping force | Unlimited disc... [See More]
- Configuration: Disc
- Length: 0.16 to 0.50
from Branham, W.C. Inc.
Used for Emergency Stop & Holding Applications. 75 PSI (5.2 Bar) Release Pressure. Aluminum Construction | Dual Belleville Disc Spring Stacks | Quick Change Pad Feature | Fits on Brake Discs Diameters from 20 inches to Unlimited Diameter | Non-Asbestos Friction Material | Spring Stacks in Parallel |... [See More]
- Configuration: Disc
- Length: 0.50 to 1.12
from Branham, W.C. Inc.
Used for Emergency Stop & Holding Applications. 85 PSI (5.9 Bar) Release Pressure. Aluminum Construction | Dual Belleville Disc Spring Stacks | Quick Change Pad Feature | Fits on Brake Discs Diameters from 20 inches to Unlimited Diameter | Non-Asbestos Friction Material | Spring Stacks in Parallel |... [See More]
- Configuration: Disc
- Length: 0.50 to 1.12
from Mach III Clutch, Inc.
Operation. Industrial friction brake engages with air pressure, release springs disengage friction brake when air is exhausted. Torque is linear in response to air pressure applied. Mounting. Flange bolts to machine frame or other fixture, shaft inserts into bore and is fixed with set screws and... [See More]
- Configuration: Disc
- Pneumatic Pressure: 80
- Torque: 22.25
- Engagement: Friction
from WPT Power Corporation
WPT Power ’s Caliper Brakes are specifically designed to meet a wide range global applications. Advanced technical design improvements increase the reliability and makes maintenance easier. Best suited for oil & gas, marine, forestry and offshore industries and has an expanded potential in... [See More]
- Configuration: Disc
- Pneumatic Pressure: 100
- Torque: 15308 to 26869
- Maximum Speed: 716 to 1146
from Montalvo Corporation
Montalvo's M-Caliper brakes offer excellent torque and sensitivity characteristics for light to medium-duty applications where high thermal capacity is not a concern (applications include tension control, emergency stop, and position control). M-Calipers feature optional friction discs for easy... [See More]
- Configuration: Disc
- Pneumatic Pressure: 75
- Torque: 15.83 to 615
- Maximum Speed: 2920 to 3735
from Dellner Brakes AB
PRESSURE APPLIED, SPRING RELEASED DISC BRAKE. Dellner Brakes model SKD 100 disc brake is a direct acting, hydraulic pressure applied, spring released unit. The braking force achieved is directly proportional to the applied pressure. The brake consists of two symmetrical halves between which the... [See More]
- Configuration: Disc
- Operation: Spring Return / Disengage
- Engagement: Friction
- Shaft: Parallel
from Tolomatic
Disc material - SAE 1010-1020 CRS, no fasteners included [See More]
- Configuration: Disc
- Shaft: Right Angle
- Engagement: Friction
- Diameter: 6.31
from Givens Engineering Inc.
STD-B pneumatic brakes are lightweight floating calipers designed for use on fixed discs. Our brakes have been optimized for static loads and low speed applications. Our brakes are ideally suited to preventing an axis of a fixture, manipulator or lift assist from rotating. Our pneumatic brakes... [See More]
- Configuration: Disc
- Pneumatic Pressure: 120
- Torque: 490
- Engagement: Friction
from Eaton Hydraulics Group
DBB. Eaton Airflex DBB disc-style brakes are the ideal solution for cyclic applications —bottling equipment, power shovels, shears and power presses —where heat dissipation is critical. Spring-applied and air- or hydraulically-released, these brakes feature long-wearing, self-lubricating... [See More]
- Configuration: Disc
- Engagement: Friction
- Torque: 211312
- Operation: Spring Actuation / Engage
from Dover Flexo Electronics, Inc.
The 110 Series Dual Disk Brake, named for its eleven-inch diameter disks, offers high performance in a torque range from 19 lb-inches up to 6,210 lb-inches. As an integral part of a high-performance unwind package, the 110 series brake allows you to deliver the appropriate torque level needed for a... [See More]
- Configuration: Disc
- Engagement: Friction
- Torque: 1.58 to 518
- Shaft: In-line
from Mach III Clutch, Inc.
Operation. Spring set friction brake is engaged by spring pressure at a fixed torque and releases with the application of designated air pressure. Mounting. Spring set brake mounts between a c-face motor and gear reducer. Not suitable for belt or chain drive (pulley or sprocket output) applications. [See More]
- Configuration: Disc
- Pneumatic Pressure: 80
- Torque: 23.83
- Engagement: Friction
from WPT Power Corporation
The WPT Low Inertia Spring Set Brake is a spring-applied pneumatic-release design for high energy, high cycle applications requiring end-shaft mounting. Our Low Inertia Spring Set Brake is time tested and used extensively throughout the Steel, Metal Forming, Oil & Gas and Marine Industries. [See More]
- Configuration: Disc
- Pneumatic Pressure: 90
- Torque: 328
- Maximum Speed: 5280
from Montalvo Corporation
The CD100 brake, the smallest in the CD-Series, is capable of a very wide torque range. It can produce as much as 68 Nm (600 in-lb) of torque and consistently hold as little as 0.05 Nm (0.44 in-lb). It is often chosen by press owners and operators to meet the demands of running unsupported films on... [See More]
- Configuration: Disc
- Pneumatic Pressure: 75
- Torque: 50
- Maximum Speed: 7000
from Dellner Brakes AB
PRESSURE APPLIED, SPRING RELEASED DISC BRAKES. Dellner Brakes model SKD disc brakes are direct acting, hydraulic or air pressure applied, spring released units. The braking force achieved is directly proportional to the applied pressure. The brakes consist of two symmetrical halves that accommodate... [See More]
- Configuration: Disc
- Operation: Spring Return / Disengage
- Engagement: Friction
- Shaft: Parallel
from Tolomatic
Pneumatic, Double Acting [See More]
- Configuration: Disc
- Pneumatic Pressure: 100
- Torque: 17.83
- Engagement: Friction
from Eaton Hydraulics Group
DBBS. When precise balance of rotating components is a must —even at higher operating speeds —trust the reliable performance of Eaton Airflex DBBS disc style brakes. These spring-applied and air- or hydraulically-released brakes are engineered to dissipate heat and are ideal for... [See More]
- Configuration: Disc
- Engagement: Friction
- Torque: 464833
- Operation: Spring Actuation / Engage
from Dover Flexo Electronics, Inc.
The 130 Series Dual Disk Brake, named for its thirteen-inch diameter disks, offers high performance in a torque range from 23 lb-inches up to 9,840 lb-inches. As an integral part of a high-performance unwind package, the 130 series brake allows you to deliver the appropriate torque level needed for... [See More]
- Configuration: Disc
- Engagement: Friction
- Torque: 1.92 to 820
- Shaft: In-line
from Mach III Clutch, Inc.
Operation. Friction brake engages with air pressure and is designed for continuous slip. Brake is spring released when air is exhausted. Torque is linear in response to air pressure applied. Mounting. Flange bolts to machine frame or other fixture, shaft inserts into bore and is fixed with set... [See More]
- Configuration: Disc
- Pneumatic Pressure: 80
- Torque: 12.33
- Engagement: Friction
from WPT Power Corporation
The WPT Power Set Clutches and Brakes are the newest addition to the WPT family of products. The Power Set line utilizes a simplistic pneumatic-piston pin-drive design. Offered in both pneumatically applied and spring-applied pneumatically-released configurations, this series of clutches and brakes... [See More]
- Configuration: Disc
- Mounting: Flange
from Montalvo Corporation
Montalvo CS-Series Brakes are a cost-effective choice in light-duty tension control applications. The CS Brake mounts in minutes in most applications. Just slide the assembly onto your keyed shaft, secure it with the torque pin and setscrews, and you are ready to apply air and run. CS Series single... [See More]
- Configuration: Disc
- Pneumatic Pressure: 75
- Torque: 25 to 50
- Engagement: Friction
from Dellner Brakes AB
PRESSURE APPLIED, SPRING RELEASED DISC BRAKE. Dellner Brakes model SKD 4x100 disc brake is a direct acting, hydraulic pressure applied, spring released unit. The braking force achieved is directly proportional to the applied pressure. The brake consists of two symmetrical halves, produced of steel,... [See More]
- Configuration: Disc
- Operation: Spring Return / Disengage
- Engagement: Friction
- Shaft: Parallel
from Tolomatic
Bellville Spring Washers. Aluminum or Cast Iron Construction. Standard Buna-N Seals. Replaceable High-Grade Friction Material. Zinc Plated Bolts [See More]
- Configuration: Disc
- Engagement: Friction
- Pneumatic Pressure: 1500
- Operation: Spring Actuation / Engage
from Eaton Hydraulics Group
WCSB. Engineered to excel in heavy-duty braking and tensioning applications, Eaton Airflex WCSB brakes are air-applied, water- and air-cooled, multiple-disc brakes. With greater braking and tensioning control, Eaton Airflex WCSB elements are perfect for drawworks, mooring systems, log yarders and... [See More]
- Configuration: Disc
- Power: 3900
- Torque: 421552
- Engagement: Friction
from Dover Flexo Electronics, Inc.
The 1800 Series Dual Disk Brake, named for its eighteen-inch diameter disks, offers high performance in a torque range from 33 lb-inches up to 17,990 lb-inches. As an integral part of a high-performance unwind package, the 1800 series brake allows you to deliver the appropriate torque level needed... [See More]
- Configuration: Disc
- Engagement: Friction
- Torque: 2.75 to 1499
- Shaft: In-line
from Mach III Clutch, Inc.
Operation. Spring set friction brake is engaged by spring pressure at a fixed torque and releases with the application of designated air pressure. Mounting. Spring set brake flange bolts to machine frame or other fixture, shaft inserts into bore and is fixed with a customer supplied key. Can also be... [See More]
- Configuration: Disc
- Pneumatic Pressure: 80
- Torque: 23.83
- Engagement: Friction
from WPT Power Corporation
WPT Power manufactures quality Water Cooled Brakes for the oil & gas, marine and offshore industries. Water-cooled brakes available are air-actuated, spring set or a dual actuated for heavy-duty braking and holding applications. Our Dual Actuated WCB combines air applied control and spring... [See More]
- Configuration: Disc
- Operation: Spring Actuation / Engage (optional feature)
- Engagement: Friction
- Shaft: In-line
from Montalvo Corporation
Montalvo HP-Series pneumatic tension brakes are the result of 60+ years of innovative design, engineering excellence and renown customer service in the converting industry. The HP is the benchmark for performance in all applications from board to tissue. Features. High Performance. Wide Torque... [See More]
- Configuration: Disc
- Pneumatic Pressure: 75
- Torque: 0.1667 to 4250
- Maximum Speed: 1300 to 4300
from Dellner Brakes AB
PRESSURE APPLIED, SPRING RELEASED DISC BRAKE. Dellner Brakes four cylinder model SKD 4x125 disc brake is a direct acting,hydraulic pressure applied, spring released unit. The braking force achieved is directly proportional to the applied pressure. The brake consists of two symmetrical halves that... [See More]
- Configuration: Disc
- Operation: Spring Return / Disengage
- Engagement: Friction
- Shaft: Parallel
from Tolomatic
Bellville Spring Washers. Aluminum or Cast Iron Construction. Standard Buna-N Seals. Replaceable High-Grade Friction Material. Zinc Plated Bolts [See More]
- Configuration: Disc
- Engagement: Friction
- Pneumatic Pressure: 2000
- Operation: Spring Actuation / Engage
from Dover Flexo Electronics, Inc.
The 60 Series Dual Disk Brake, named for its six-inch diameter disks, offers high performance in a torque range from 3 lb-inches up to 1,010 lb-inches. This brake delivers the precise torque range needed for a particular application by allocating actuation of just the number of cylinders needed,... [See More]
- Configuration: Disc
- Engagement: Friction
- Torque: 0.2500 to 84.17
- Shaft: In-line
from Montalvo Corporation
The HPS is the high-performance partner to the HP Series. It is a low-inertia, single disc design that offers advanced performance characteristics. Each size HPS is equal in performance to the same size STANDARD Series dual disc brake. Available in sizes 6, 8, and 10 , they offer modular design and... [See More]
- Configuration: Disc
- Pneumatic Pressure: 75
- Torque: 8.92 to 585
- Maximum Speed: 2900 to 4300
from Dellner Brakes AB
PRESSURE APPLIED, SPRING RELEASED DISC BRAKE. Dellner Brakes model SKD 100 disc brake is a direct acting, hydraulic pressure applied, spring released unit. The braking force achieved is directly proportional to the applied pressure. The brake consists of two symmetrical halves between which the... [See More]
- Configuration: Disc
- Operation: Spring Return / Disengage
- Engagement: Friction
- Shaft: Parallel
from Tolomatic
Bellville Spring Washers. Aluminum or Cast Iron Construction. Standard Buna-N Seals. Replaceable High-Grade Friction Material. Zinc Plated Bolts [See More]
- Configuration: Disc
- Engagement: Friction
- Pneumatic Pressure: 2000
- Operation: Spring Actuation / Engage
from Dover Flexo Electronics, Inc.
The 90 Series Dual Disk Brake, named for its nine-inch (9") diameter disks, offers high performance in a torque range from 14 lb-inches up to 3,000 lb-inches. As an integral part of a high-performance unwind package, the 90 series brake delivers the appropriate torque level needed for a particular... [See More]
- Configuration: Disc
- Engagement: Friction
- Torque: 1.17 to 250
- Shaft: In-line
from Montalvo Corporation
The industry standard and original Montalvo brake, the STANDARD Series offer wide horsepower and multiple torque ranges. They are available in 600, 800, 1000, 1400, and 1700 sizes, and offer modular design and interchangeable parts for flexibility, easy mounting, and easy maintenance. [See More]
- Configuration: Disc
- Pneumatic Pressure: 75
- Torque: 0.1667 to 1667
- Maximum Speed: 1940 to 4285
from Tolomatic
Bellville Spring Washers. Aluminum or Cast Iron Construction. Standard Buna-N Seals. Replaceable High-Grade Friction Material. Zinc Plated Bolts [See More]
- Configuration: Disc
- Engagement: Friction
- Pneumatic Pressure: 2000
- Operation: Spring Actuation / Engage
from Montalvo Corporation
The brake is extremely easy to install and the pad style eliminates maintenance time. When designing a braking system, consider the V-Series for its ease of installation, easy pad change-out, and overall torque range. The V-Series can be equipped with built-in cooling system to give you extra torque... [See More]
- Configuration: Disc
- Pneumatic Pressure: 75
- Torque: 8.92 to 891
- Maximum Speed: 2300 to 4300
from Tolomatic
Bellville Spring Washers. Aluminum or Cast Iron Construction. Standard Buna-N Seals. Replaceable High-Grade Friction Material. Zinc Plated Bolts [See More]
- Configuration: Disc
- Engagement: Friction
- Pneumatic Pressure: 2000
- Operation: Spring Actuation / Engage
from Tolomatic
Bellville Spring Washers. Aluminum or Cast Iron Construction. Standard Buna-N Seals. Replaceable High-Grade Friction Material. Zinc Plated Bolts [See More]
- Configuration: Disc
- Engagement: Friction
- Pneumatic Pressure: 2000
- Operation: Spring Actuation / Engage
from Tolomatic
Bellville Spring Washers. Aluminum or Cast Iron Construction. Standard Buna-N Seals. Replaceable High-Grade Friction Material. Zinc Plated Bolts [See More]
- Configuration: Disc
- Engagement: Friction
- Pneumatic Pressure: 2000
- Operation: Spring Actuation / Engage
from Tolomatic
Replaceable High-Grade Friction Material. Standard Buna-N Seals. Durable Construction. Zinc Plated Bolts [See More]
- Configuration: Disc
- Pneumatic Pressure: 100
- Torque: 42.75
- Engagement: Friction
from Tolomatic
Replaceable High-Grade Friction Material. Standard Buna-N Seals. Durable Construction. Zinc Plated Bolts [See More]
- Configuration: Disc
- Pneumatic Pressure: 100
- Torque: 85.5
- Engagement: Friction
from Tolomatic
Replaceable High-Grade Friction Material. Standard Buna-N Seals. Durable Construction. Zinc Plated Bolts [See More]
- Configuration: Disc
- Pneumatic Pressure: 100
- Torque: 175
- Engagement: Friction
from Tolomatic
Disc material - SAE 1010-1020 CRS, no fasteners included [See More]
- Configuration: Disc
- Shaft: Right Angle
- Engagement: Friction
- Diameter: 6.31
from Tolomatic
Socket Head Cap Screws. Keyway Set Screws. Carbon 1010 Steel [See More]
- Configuration: Disc
- Engagement: Friction
- Torque: 500
- Shaft: Right Angle
from Tolomatic
Flat within .010 inch, stress relieved and. blanchard ground to an 80 (RMS). micro-inch finish [See More]
- Configuration: Disc
- Engagement: Friction
- Torque: 292
- Shaft: Right Angle
from Tolomatic
Disc material - gray cast iron (G3000) no fasteners included [See More]
- Configuration: Disc
- Shaft: Right Angle
- Engagement: Friction
- Bore Diameter: 1 to ?
from Tolomatic
Quick disconnect hub for 6.3215" disc (SH) [See More]
- Configuration: Disc
- Shaft: Right Angle
- Engagement: Friction
- Mounting: Quick Disconnect
from Tolomatic
Quick disconnect bushings for 8" & 10" disc (SH) [See More]
- Configuration: Disc
- Shaft: Right Angle
- Engagement: Friction
- Mounting: Quick Disconnect
from Tolomatic
Caliper Disc Brake Hubs and Bushings - Quick Disconnect Hubs [See More]
- Configuration: Disc
- Shaft: Right Angle
- Engagement: Friction
- Mounting: Quick Disconnect