Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Standards and Technical Documents - Requirements for service entrance equipment -- C22.2 NO. 0.19-10Supplier: Accuris
Description: Requirements for service entrance equipment
-
Supplier: CSA Group
Description: This is the first edition of C22.2 No. 0.19, Requirements for service entrance equipment. This Standard gives the general and specific minimum safety objectives that service entrance equipment must meet. Scope This Standard contains safety objectives and
-
Supplier: UL Standards & Engagement
Description: 1.1 These requirements cover Type USE and USE-2 (below-ground) and Type SE (above-ground) power cables for installation in accordance with Article 338 and other applicable parts of the National Electrical Code (NEC). These cables are for the service-entrance and other (NEC) uses
-
-
Supplier: Transtector Systems, Inc.
Description: Electrical cabinet (also known as power distribution box) 1101-602-625645 from Transtector is a UL891 Service Entrance power distribu-tion box that accepts a 120/240 Vac Split-phase electrical service and distributes power to individual loads via 42 Pos 20 A 2-Pole circuit
- Maximum Voltage: 120 to 240 volts
- Maximum Current: 200 amps
- Main Device: Breakers
- Features: Other
-
Supplier: Transtector Systems, Inc.
Description: Electrical cabinet (also known as power distribution box) 1101-602-123644 from Transtector is a UL891 Service Entrance power distribu-tion box that accepts a 120/240 Vac Split-phase electrical service and distributes power to individual loads via 42 Pos 20 A 2-Pole circuit
- Maximum Voltage: 120 to 240 volts
- Maximum Current: 400 amps
- Main Device: Breakers
- Features: Other
-
Supplier: L-com, Inc.
Description: Electrical cabinet LC-MM08-5512 from L-Com is a UL 67 Listed Service Entrance Rated AC power distribution box that accepts a 120 Vac single-phase electrical service into a main breaker, and distributes power to individual loads via DIN-Rail type circuit breakers. This electrical
-
Supplier: Transtector Systems, Inc.
Description: Electrical cabinet (also known as power distribution box) SC-MM08-5512 from Transtector is a UL67 Service Entrance power distribu-tion box that accepts a 120 Vac Single-phase electrical service and distributes power to individual loads via 5x 10A circuit breakers. This
- Maximum Voltage: 120 volts
- Maximum Current: 60 amps
- Main Device: Breakers
- Features: Other
-
Supplier: Transtector Systems, Inc.
Description: protection devices from Transtector that ship same-day. This AC surge suppression equipment enclosure incorporates a 60A main. Transtector SC-2MMA9-7602-NNN01 60A main 240 Vac and 120 Vac electrical enclosure with SPD is a service entrance design. Our 60 amp service
- Type: Electronic and Instrument Enclosures
- Features: Hinged Cover, Locking
- Shape: Rectangular
- Mounting Type: Wall Mount
-
Supplier: UL Standards & Engagement
Description: (6562 ft) and in a humidity tolerance of 0 - 95 percent, unless indicated for use in other conditions. 1.8 Unless specifically evaluated and marked “Service Entrance”, these current sensors are evaluated for installation within equipment on the load side of the service
-
Description: position. This document addresses the use of SBAS L1 to provide augmentation to the GPS shipborne receiver (IMO Resolution MSC.112(73)). This document includes the minimum performances for SBAS L1 maritime receivers to be obtained by the receiver equipment under coverage of SBAS
-
Supplier: AENOR
Description: Road traffic signal equipment. Remote stations. Part 5-2: Service protocols. Control service on tunnel entrances and exits. Program management service.
-
Supplier: AENOR
Description: Road traffic signal equipment. Remote stations. Part 6-2: Test methods. Control service entrances and exits. Program management service
-
Supplier: Schneider Electric
Description: Power Distribution - Circuit Breaker Type Ideal for service entrance equipment or downstream distribution panels in the electrical system of a large commercial or industrial facility. Space-saving module for value-added digital solutions Combines I-Line and lighting sections in
- Maximum Current: 100 to 800 amps
- Main Device: Breakers, Fusible
- Panels: Single-Panel
-
Description: MSC.302(87) and is associated with IEC 62923-1. This document applies to navigation in ocean waters for the standard positioning service and harbour entrances, harbour approaches and coastal waters, as defined in IMO resolution A.1046(27) within IRNSS/NavIC coverage area.
-
Supplier: Mersen
Description: High-grade silica filler ensures fast arc quenching and high current limitation Applications Motor circuits Mains Feeders Branch circuits Transformers Service entrance equipment General-purpose equipment
- Voltage Rating: 600 volts
- Current Rating: 600 amps
- Rated Breaking Capacity: 200,000 amps
- Operating Temperature: 80 C
-
Supplier: Mersen
Description: filler ensures fast arc quenching and high current limitation Applications Motor circuits Mains Feeders Branch circuits Transformers Service entrance equipment General-purpose equipment
- Voltage Rating: 250 volts
- Current Rating: 600 amps
- Rated Breaking Capacity: 200,000 amps
- Operating Temperature: 80 C
-
Supplier: Dupont Molykote
Description: service entrance and underground connections. Damping medium for dash pots in electrical and electronic equipment. Used as an anti-stick and a sealant for transformer gasket and equipment enclosures. It prevents gaskets from sticking to metal and resists weathering and
- Operating / Use Temperature: -40 to 399.2 F
- Dielectric Strength: 17,716,535.4330708 V/m
- Density / Specific Gravity (@15.6°C, 60°F): 1 specific gravity
- Industry Applications: Automotive / Transportation, Electrical / Electronic, Food Grade / Contact (FDA H1), Marine
-
Supplier: Innovative Technology
Description: Eaton's residential meter breakers are service entrance equipment systems that consist of a single meter socket and loadcenter or a meter socket and main breaker combined in one enclosure, thus providing the contractor with a labor and material savings when installing. Meter
-
Description: listed for connections on the load side of the service entrance main overcurrent protective device. SPDs manufactured for use in an association with electrical power distribution equipment such as load centers, motor control centers, panelboards, switchboards, switchgear, and
-
Supplier: Pentair, Inc.
Description: " MODULAR TYPE 12 INCH W X 7.5 INCH D X 16 INCH H SIZE SERVICE ENTRANCE, SERVICE ELECTRONIC EQUIPMENT USED ON 50/60 HZ FREQUENCY RATING 12 TO 2 AWG CONNECTION TYPE UL 1449, NOM APPROVAL COMMERCIAL, INDUSTRIAL APPLICATION 120/240 V VOLTAGE RATING WALL MOUNTING NEMA 4X,
- Maximum Surge Current: 100,000 amps
- Operating Temperature: 14 to 140 F
- Voltage: 120/240
- Wires: 3-Wire
-
Supplier: Littelfuse, Inc.
Description: Littelfuse LLSRK series POWR-PRO™ fuses provide superior overload and short circuit protection for service entrance, main, feeder and general-purpose branch circuits up to 600 amperes.LLSRK series fuses can be installed in existing Class H fuse blocks to upgrade systems containing
- Voltage Rating: 600 volts
- Current Rating: 0.15 amps
- Approvals / Standards: CSA Certification, UL Approval
- Features: Other, Time Lag
-
Description: of the service entrance equipment. Such surge protective devices are also known as secondary arresters. This is coordinated with C62.44 (the application guide), NEC Article 285, and ANSI/UL 1449-2006.
-
Description: Telecommunications Facilities provides the latest requirements for fire protection of facilities providing telephone, data, wireless, internet, and video services to the public as well as life safety for the occupants plus protection of equipment and service continuity.
-
Description: video services to the public -- as well as life safety for the occupants plus protection of equipment and service continuity. Comprehensive coverage gives designers, architects, facility owners, and AHJs both performance-based and prescriptive options for telecommunication
-
Supplier: TelephoneStuff.com
Description: Distribution Panel Mount Surge Protective Device - 240V/4 Wire. Designed for installation at the service entrance and at branch panels, or as dedicated TVSS for critical equipment. Provides dedicated surge protection for each phase to neutral, phase to ground, and neutral to
- Features: SPD
- Mounting: Wall / Panel / Backboard Mount
-
Supplier: ValueTronics International, Inc.
Description: case, with 2 year warranty Applications: Disturbance analysis – Uncover root cause of equipment malfunction for later mitigation and predictive maintenance Quality of service compliance – Validate incoming power quality at the service entrance Power quality studies –
- Phase: Three-Phase
-
Supplier: Caterpillar Machines
Description: The 300.9D sub 3 ton class provides customers with a lower cost unit for entrance into MHE ownership. Compact Dimensions With an overall width of only 730 mm (2 ft 5 in) the Cat 300.9D can easily drive through narrow passages and doors. Both indoor and outdoor jobs are now accessible with the
-
Supplier: WorldWide Electric Corporation
Description: calculating the motor operating temperature even when the motor isn’t running. Knows when the motor is cool enough for a successful restart. PTC Thermistor Input for use on motors with embedded PTC temperature sensors. Service Entrance Rated which meets NEC requirements. Full Panel
- Features: AC Motor Starter
-
Supplier: ValueTronics International, Inc.
Description: root cause of equipment malfunction for later mitigation and predictive maintenance Quality of service compliance - Validate incoming power quality at the service entrance Power quality studies - Assess baseline power quality to validate compatibility with critical
- Data Acquisition: Datalogger / Recorder
-
Supplier: Fluke
Description: Perform high-speed transient analysis and uncover root cause of equipment malfunction for later mitigation and predictive maintenance. The fast transient option, with its 6000 V measurement range, allows capture of very short impulses such as lightning strikes. Class-A
-
Supplier: CSA Group
Description: controllers intended for service entrance applications. (See 5.204 and Annex A, Item 3.) This Standard does not cover: a) equipment for use in classified (hazardous) locations as defined in the applicable installation codes or standards; b) components contained in contactors and
-
Supplier: CSA Group
Description: panelboards, rated 600 V and less, for use in nonhazardous locations in accordance with the Canadian Electrical Code, Part I, to provide overcurrent protection for a number of circuits. 1.2 Clauses 1 to 6 apply to panelboards and enclosed panelboards of other than the service entrance
-
Supplier: Electri-Flex Company
Description: Permitted for Service Entrance wiring to six feet Article 230.43 Used as Feeders and Services at Marinas and Boatyards Article 553.7(B) Wiring on Building Article 225.10 Conductor Enclosures Adjacent to Motors over 1000 V Article 430.223 Underground Service, Feeder,
- Conduit Size: 1.25 inch
- Units: English Size
- Flexibility: Flexible Conduit
- Material: Stainless Steel, Steel
-
Supplier: Electri-Flex Company
Description: for Service Entrance wiring to six feet Article 230.43 Used as Feeders and Services at Marinas and Boatyards Article 553.7(B). Wiring on Building Article 225.10 Conductor Enclosures Adjacent to Motors over 1000 V Article 430.223 Underground Service, Feeder, Branch
- Conduit Size: 1 inch
- Units: English Size
- Material: Stainless Steel, Steel
-
Supplier: APX Enclosures, Inc.
Description: with two (2) adjustable 19" and 24" rack rails to provide versatile positioning of equipment and ease of service. Optional panels or shelves may be added. 3. The door frame opening is flanged on all four (4) sides. These flanges increase the strength of the door opening and prevent
- Type: Electronic and Instrument Enclosures
- NEMA Rating: NEMA / IP Enclosures
Find Suppliers by Category Top
Featured Products Top
-
what piping modifications are required. In many cases two spool pieces, two RAPIDJACK check valves, and a 3-way plug valve will be required. Option 3: SST Baseplate/Piping Upgrade Many Smith & Loveless pump stations have been in service more than 25 years. With time, wear (read more)
Browse Wastewater Treatment Equipment Datasheets for Smith & Loveless, Inc. -
Service entrance equipment Industrial power distribution systems Commercial electrical distribution equipment OEM electrical assemblies (read more)
Browse Fuses Datasheets for VICFUSE -
: Polarization dielectric coating Entrance & Exit Faces: AR coating Applications Laser Systems Polarization Control Systems Optical Experimental Equipment Photonics Research Instruments Laser (read more)
Browse Polarizing Cube Beamsplitters Datasheets for CeNing Optics Co., Ltd. -
announced its entrance into the restroom air care category in North America, with the introduction of the Tork Constant Air Freshener to the U.S. and Canada. Bringing innovation to the traditional air freshener category, Tork Constant Air Fresheners continuously deliver freshness in restrooms (read more)
Browse Cleaning Agents and Surface Treatments Datasheets for Tork -
mirrors to be placed directly at both the entrance and exit pupils, enabling rapid field switching, wide-angle scanning, and exceptional stability across the full scan range. Key Specifications (read more)
Browse Microscope Lenses and Objectives Datasheets for Avantier Inc. -
. Unlike alternative lens options, where the aperture is located inside the lens, the aperture of the AR/VR lens is located on the front of the lens, enabling positioning of the imaging system’s entrance pupil within NED headsets to view head-mounted displays (HMDs) at the same location as the (read more)
Browse Color Meters and Appearance Instruments Datasheets for Radiant Vision Systems -
. Optimized Coating Design:Partial reflective coating on the hypotenuse and AR coatings on entrance/exit surfaces improve transmission efficiency. Large Effective Aperture:Clear aperture >90% maximizes optical (read more)
Browse Polarizing Cube Beamsplitters Datasheets for CeNing Optics Co., Ltd. -
in either vertical or horizontal mounting configuration. Both style guides have a funnel entrance design that helps to guide (read more)
Browse Board Mount Connectors Datasheets for Keystone Electronics Corp. -
factories, electronics factories, machinery factories, welding factories, fireproof factories, printing factories, sterile rooms, computer rooms, offices, supermarkets, fresh markets, restaurant kitchens, etc. Any size or shape of entrance or functional compartment can be used. (read more)
Browse Sheet Metal Fabrication Services Datasheets for Running Industry Co., Ltd -
corridors and entrance into the private residences had to be scheduled. Construction time in private residences was at a minimum, due to Circuit Solver’s ease of installation. The Result Residents are more than pleased with hot water delivery times after the (read more)
Browse Water Valves Datasheets for ThermOmegaTech®
Conduct Research Top
-
Decorative Garden Entrance Way Dazzles All With Lumiflon-Coated Surfaces
The ornamental metal archway, embellished with leaf-shaped accents and a brightly-colored sign that reads "Rory Meyers Children's Adventure Garden," received Tnemec's Series 1078 Fluoronar Metallic, a high-solids fluoropolymer coating
-
Section 211100: Facility Fire-Suppression Water-Service Piping Spec
Section includes fire-suppression water-service piping and related components outside the building [and service entrance piping through floor into the building] [and service entrance piping through wall into the building] and the following:
-
Epoxy Floor Sparkles in Artists' Center
As a part of the transformation of an abandoned public school building into an affordable haven for aspiring artists in the heart of New York City, Imperial Flooring Systems was tasked with installing an epoxy terrazzo flooring system in the entrance and main corridors of the 116-year-old facility.
-
Who's Guarding Access to your Access Control System?
When it comes to managing who is allowed entrance to critical infrastructure, the most vulnerable point of attack is not the access control system itself, encryption used, nor physical media such as employee badges - it's how the cryptographic keys embedded in door locks get there to begin with.
-
Prisms
Prisms are used in an optical system when the exit beam may be reflected or deviated from the entrance direction. The images produced by prisms can be made reversed, inverted or rotated. Prisms are typically made of glass materials, and can be made from any material that is transparent
-
Smoke Bomb Pressures
Smoke bombs have a variety of applications from detecting leaks in plumbing systems to discovering alternate entrances in collapsed caves or mines or providing cover/smoking out individuals in dangerous situations. Since they are bombs, pressure is involved in their safe and effective use.
-
ZAGO Innovations Used by Global European Engineering Firm
ZAGO Manufacturing Company has grown into a into a reputable global leader, working with European engineers on a wide array of projects that require sealing. It has made an entrance into the European sealing market by providing clients with incomparable fasteners, switch boots, and crystal seals
-
Report from BIO 2006
need them, seeing these images at an event like this was a bit like seeing an article about global famine sandwiched between ads for $10,000 Louis Vuitton purses and $5 million real estate in the The former president looked very well, and his entrance on stage brought the audience [representing
-
Smart Computing Article - Networking Terms To Know
and maintained by the Network Administrator. The central cable that serves as a major communications conduit. This can be anything from world.com to a small cable connecting a few network-based devices, depending on the size of the network involved. An undocumented method of gaining entrance to a computer system
-
Traffic Gate Control System For Major Tunnel Project
and at each entrance, traffic control gates would be installed to control the movement of cars during an emergency.
-
Pine Glades Road Snow Melt & Cabin Radiant Heat
in high energy efficiency and high standard of sustainability. You can find Heatizon products throughout this development, from interior space and floor heating for the Cabin residences to an extensive snow melting system for the tunnel entrance and road and sidewalks leading up the hill to the Cabin
-
Use Interior Window Graphics to Create Show-stopping Naval Air Warfare Logo that Reinforces Brand Identity.
to install a wide-format version of its logo on the front entrance of its building, which is three-stories high and features floor-to-ceiling windows. To complete the project, the center reached out to Barefoot Graphics of Lexington Park, Maryland.
-
Correction Methods for Semiconductor Laser Diodes
entrance NA (numerical aperture) of the microlens captures virtually all of the optical energy available from the laser diode. * Another method of beam circularization employs a pair of anamorphic correcting prisms. By adjusting the angles of the prisms and incorporating a circular aperture, we can
-
Application Note: Considerations for Selecting Littelfuse MOVs and Fuses for Industrial Motor Applications
Littelfuse offers specific Varistors and Classes of Fuses to address over-voltage and over-current transients in the Industrial environment. This application area is typically characterized as AC utility service entrance and distribution, and the associated high current inductive loads that can
More Information Top
-
McGraw-Hill's National Electrical Code® 2014 Handbook, Twenty-Eighth Edition > Chapter Two
Part (C) requires that whenever a service is derived from a grounded neutral system, the grounded neutral conductor must be brought into the service entrance equipment , even if the grounded conductor is not needed for the load supplied by the service.
-
IEEE Recommended Practice for Powering and Grounding Electronic Equipment - Redline
Consideration should be given to the location of accessible grounding electrodes in order to provide grounding of the power system as close as practicable to the service entrance equipment .
Indicates content that may require registration and/or purchase.