-
Supplier: P.B.A. Industrial Supplies Ltd.
Description: Flange Adapter Series Available Include: 9713, 9743, 9793, 9816, 9846, 9896, 9903, 9906, 9903K, 9906K, 9975 and 9975V
- English Size: 0.5000 to 2 inch
- Size: English
-
Supplier: Grinnell
Description: The GRINNELL Figure 61 Flange Adapter provides a direct transition from flanged components to GRINNELL grooved copper components. Flange bolt patterns conform to ANSI Class 125 and 150 standards.
- Category: Adapter
- English Size: 2 to 6 inch
- Material: Copper
- Size: English
-
Supplier: Grinnell
Description: The GRINNELL Figure 72916 G-MINE Flange Adapter provides a direct transition from flanged components to G-MINE PVC piping components.
- Category: Adapter
- Connection: Flange
- English Size: 2 to 12 inch
- Material: PVC/CPVC
-
-
Supplier: Victaulic Co. of America
Description: Designed for direct connection of flanged components into a grooved cast or ductile system Designed for Class 53 or higher pipe Sizes from 3 - 24? | DN80 - DN600 Pressures up to 250 psi | 1724 kPa | 17 bar Optional coatings include coal tar epoxy, organic zinc primer and bituminous
- Category: Adapter
- Connection: Flange
- English Size: 3 to 24 inch
- Material: Iron (Cast/Ductile)
-
Supplier: Grinnell
Description: Provides a direct transition from flanged components to Stainless Steel G-PRESS piping components.
- Category: Adapter
- Connection: Flange
- English Size: 0.5000 to 2 inch
- Material: Stainless Steel
-
Supplier: Grinnell
Description: Plain End fittings provide an economical and efficient method of changing direction, adding an outlet, reducing, or capping piping systems. Plain End fittings are fabricated from Schedule 40 steel pipe and are designed to be used with the GRINNELL 909 Plain End Coupling.
- Category: Adapter
- Connection: Weld, Flange
- English Size: 2 to 6 inch
- Material: Carbon & Alloy Steel
-
Supplier: Qosina Corp.
Description: BioPAT® Flow Adapter, Sanitary Flange
- English Size: 1 inch
- Material: Polyethylene (PE)
- Size: English
-
Supplier: Victaulic Co. of America
Description: Permits direct connection of ANSI Class 125 and 150 flanged components into HDPE systems. No fused adapters or standard flange gasket are required. Available in 4 – 8? | DN100 – DN200 sizes
- Category: Adapter
- Connection: Weld, Flange
- English Size: 4 to 8 inch
- Material: Iron (Cast/Ductile)
-
Supplier: PT
Description: Flanged Adapter, dry disconnect coupling
- Connection: Flange
- English Size: 2 inch
- Material: Stainless Steel
- Size: English
-
Supplier: ISCO/Snap-Tite
Description: Flange adapter fitting, weighs 4 lbs
- Category: Adapter
- Connection: Flange
- English Size: 6 inch
- Material: Polyethylene (PE)
-
Supplier: ISCO/Snap-Tite
Description: Flange adapter fitting, weighs 113 lbs
- Category: Adapter
- Connection: Flange
- English Size: 32 inch
- Material: Polyethylene (PE)
-
Supplier: ISCO/Snap-Tite
Description: Flange adapter fitting, weighs 25 lbs
- Category: Adapter
- Connection: Flange
- English Size: 12 inch
- Material: Polyethylene (PE)
-
Supplier: ISCO/Snap-Tite
Description: Flange adapter fitting, weighs 24 lbs
- Category: Adapter
- Connection: Flange
- English Size: 12 inch
- Material: Polyethylene (PE)
-
Supplier: MAIN Manufacturing Products, Inc.
Description: MAIN MANUFACTURING PRODUCTS, INC. has manufactured and distributed hydraulic flanges to SAE J518, ISO 6162, ISO 6164, JIS, and other flange standards for over 50 years. MAIN also manufactures and/or sells flange adapters, SAE split flanges, manifolds, subplates,
- Connection: Threaded
- English Size: 0.5000 to 2 inch
- Material: Carbon & Alloy Steel, Stainless Steel
- Metric Size: 13 to 50 mm
-
Supplier: QuinStar Technology, Inc.
Description: QuinStar series QFA Flange Adapters are used to facilitate connection between different types or formats of flanges used for the same waveguide size. These are produced in various waveguide bands in the 12.4 to 220 GHz range with various combinations of commonly used
- Component Type: Other
- Operating Frequency Range: 12.4 to 220 GHz
- Profile: Circular
- Waveguide Cross Section: Rectangular
-
Description: Viewport shutters are normally installed on a vacuum chamber CF flange behind a viewport. The shutter serves to shield the viewport surface and prevent the build-up of deposition materials. The shutter plate opens a full 90 degrees by rotating the supplied all metal rotary motion feedthrough
- Configuration: Multiple Port Type / Adapter
- Fitting Connection / Port Type(s): Flange
- Flange and Fitting Seal / System: Metal Seal (Wire / Copper Gasket), Elastomeric Face Seal / O-ring, ISO-KF / ISO-QF (Small Clamped, <2"), Conflat
- ISO Nominal Size: NW 10, NW 16, NW 25, NW 40, NW 50, NW 63, NW 80, NW 160
-
Supplier: Maury Microwave Corporation
Description: Features Converts one flange type to another in the same band, with minimum length 1.01 typical VSWR Mounting hardware and assembly instructions are provided In addition to the industry standard waveguide flanges shown in the Available Models chart below, these adapters will
- Component Type: Flanges
- EIA Waveguide Size (WR): 137
- Operating Frequency Range: 5.85 to 8.2 GHz
- Waveguide Cross Section: Rectangular
-
Supplier: Gearing Solutions
Description: mount. The housing unit will fit into both the foot and flange mount. By combining our Adapters with our GHP Planetary line, design engineers can create NEMA gearheads.
- Flange: IEC (Metric)
- Shape: Square
-
Supplier: Accuris
Description: ADAPTER, STRAIGHT, FLANGE TO TUBE
-
Supplier: APITech
Description: Inmet Brand Product
- Adapter Style: Straight Jack-Plug
- Adapter Type: Coaxial
- Frequency Range: 0.0 to 18000 MHz
- RF Connector Type: Type N, Other
-
Supplier: FITOK GmbH
Description: Founded in 1998, FITOK Group has been an industry-leading developer and manufacturer of superior quality instrumentation valves and fittings, having our R&D centers, manufacturing facilities, warehousing and service locations in Offenbach Germany, Texas USA, Shenzhen China and Dubai UAE. We have the
- Configuration: Multiple Port Type / Adapter
- Features: Reducing
- Fitting Connection / Port Type(s): Threaded
- Flange OD: 0.2500 to 1 inch
-
Supplier: U.S. Plastic Corporation
Description: Manifold Flanged fittings are used in various agriculture and industrial liquid flow applications. These quickchange connections allow you to replace or inspect fittings in seconds as opposed to time consuming threaded liquid handling systems. Easy to use, there is no pipe thread installation
- Category: Adapter, Flange
- Connection: Flange
-
Supplier: Edwards Vacuum
Description: When you buy flange fittings from Edwards, you can expect the service that only a leading international supplier can offer you. Whether you are an OEM (needing scheduled deliveries of component kits for series production) or a unique system builder, you can rely on your local supplier to meet
- Flange and Fitting Seal / System: Other
- ISO Nominal Size: NW 16, NW 25, NW 40, NW 50
- Materials of Construction: Steel - Stainless
- Operating / Bake-out Temperature: 14 to 392 F
-
Supplier: MAIN Manufacturing Products, Inc.
Description: MAIN MANUFACTURING PRODUCTS, INC. has manufactured and distributed hydraulic flanges to SAE J518, ISO 6162, ISO 6164, JIS, and other flange standards for over 50 years. MAIN also manufactures and/or sells flange adapters, SAE split flanges, manifolds, subplates,
- Category: Flange, Reducer
- Connection: Threaded, Flange
- English Size: 0.5000 to 2 inch
- Material: Carbon & Alloy Steel, Stainless Steel
-
Supplier: Sinotech
Description: Shaft diameter F9mm, clamping flange, housing diameter F58mm, flange diameter 66mmx66mm. Flange adapter, high shock and vibration, good anti-interference, long working life. Connector: Cable axial, cable radial, plug axial, plug radial. Applications: Crosstable
- Count Rate: 120 kHz
- Diameter or Width: 2.28 inch
- Electrical Output and Interface: Digital: Square Wave
- Encoder Signal Output: Quadrature
-
Supplier: Kuriyama of America, Inc.
Description: All sizes except 1/2", 5" and 8" comply with Mil-Spec A-A-59326 for interchangeability 5" Size complies with ASTM specs for interchangeability 1/2" x 1/2" are not specified under Mil Specs All 8" and 10" female couplers supplied with 4 locking handles, safety clips, pull rings and chains Aluminum
- English Size: 6 inch
- Material: Aluminum, Brass/Bronze, Carbon & Alloy Steel, Stainless Steel
- Size: English
-
Supplier: jbj Techniques Limited
Description: SAE standard 3,000 and 6,000 series flanges for screw or weld connection. Available for straight connection, fixed or swivel elbow with solid or split clamps allowing great flexibility of system design. CETOP, DIN and ISO flanges for large flows and high pressures up to 400 bar
- Category: Adapter, Flange
- Connection: Flange
- English Size: 0.7500 to 2 inch
- Material: Carbon & Alloy Steel
-
Supplier: HUBER+SUHNER AG
Description: HUBER+SUHNER offers a wide range of hybrid adapter for connections between diffrent connector series and types. Features • Usable for diffrent connector series & types • Two different flange types available: snap-in and 2 hole flanges
- Connector / Adapter Style: Adapter
-
Supplier: Amphenol RF
Description: Adapter TNC-Jack/SMA-Jack,4- hole Flange Mount Amphenol is the world leader in the design, manufacture and supply of RF interconnect systems for the automotive, broadband, instrumentation, internet, military/aerospace and wireless infrastructure markets. With the combination of our
- Adapter Type: Coaxial
- RF Connector Type: SMA, TNC
-
Supplier: Richardson RFPD
Description: Flange Female-Female Adapter
- RF Connector Type: UHF / PL259
-
Supplier: Stainless Hose Fittings, Ltd.
Description: Type: MALE JIC x CODE 61 FLANGE 45° Description: Flange Adapter Part #: 1703 Material: 316 Stainless Steel
- Material: Stainless Steel
- Size: English
-
Supplier: Kee Safety Inc.
Description: Railing Flange with Toeboard Adapter The Type L69 fitting has been designed for guardrailing and balustrading applications and provides the added benefit of attaching a kick plate to the base. The base plate holes are of sufficient diameter to allow for attachment with either a
- English Size: 0.4500 to 1.25 inch
- Material: Aluminum
- Size: English
-
Supplier: Reid Supply
Description: V-flange collet chucks are used to hold a workpiece or tool by forming a collar around the object to hold it securely in place. Clamping force is applied through a tapered design that uses a sleeve and inner cylindrical surface. Allows self-centering, resistance against loosening,
- Type: Collet Chuck
-
Supplier: Tompkins Industries, Inc.
Description: No braze flange adapters - straight
- Connection: Flange
- Material: Carbon & Alloy Steel
- Size: English
-
Supplier: RFMW
Description: Adapters In-Series Flange Mount F/F - SMA
Find Suppliers by Category Top
Featured Products Top
-
MAIN MANUFACTURING PRODUCTS, INC. has manufactured and distributed hydraulic flanges to SAE J518, ISO 6162, ISO 6164, JIS, and other flange standards for over 50 years. Main also manufactures and/or sells flange adapters, SAE split flanges, manifolds, subplates, special hydraulic connectors and (read more)
Browse Datasheets for MAIN Manufacturing Products, Inc. -
MAIN Manufacturing Products has manufactured and distributed hydraulic flanges to SAE J518, ISO 6162, ISO 6164, JIS, and other flange standards for over 50 years. MAIN also manufactures and/or sells flange adapters, SAE split flanges, manifolds, subplates, special hydraulic connectors and other (read more)
Browse Hydraulic Fittings Datasheets for MAIN Manufacturing Products, Inc. -
Our hydraulic reducing flanges eliminate that troublesome "Christmas tree look". MAIN Manufacturing Products stocks flanges with reduced port sizes. This eliminates the cost and leak paths that adapters create. Because most are offered at the same price, the connection cost is (read more)
Browse Datasheets for MAIN Manufacturing Products, Inc. -
MAIN Manufacturing Products, Inc. has been serving the fluid power industry for more than 50 years! We offer hydraulic flanges that meet many different standards and other types of fittings and adapters Click an item below to learn more (read more)
Browse Datasheets for MAIN Manufacturing Products, Inc. -
MAIN MANUFACTURING PRODUCTS, INC. has manufactured and distributed hydraulic flanges to SAE J518, ISO 6162, ISO 6164, JIS, and other flange standards for more than 50 years. Main Manufacturing also manufactures and/or sells flange adapters, SAE split flanges, manifolds, subplates, special (read more)
Browse Pipe Fittings Datasheets for MAIN Manufacturing Products, Inc. -
MAIN Manufacturing Products has manufactured and distributed hydraulic flanges to SAE J518, ISO 6162, ISO 6164, JIS and other flange standards for over 50 years. Main Manufacturing also manufactures and/or sells flange adapters, SAE split flanges, manifolds, subplates, special hydraulic (read more)
Browse Hydraulic Fittings Datasheets for MAIN Manufacturing Products, Inc. -
• Machined Coupling Drum Assembly • Flange Adapter for Flywheel Mounting Applications: • Fans • Blowers • Conveyor drives • Mills • Compressors • Chipper-Shredders • Garden Equipment • Drilling Equipment • Construction Equipment (read more)
Browse Mechanical Clutches Datasheets for Hilliard Corporation (The) -
ring into the face of the cylinder end cap, bushing or flange plate, using 3 or 4 self tapping screws, machine screws or bolts to hold in place. The correct clearances have been provided in the adapter to allow the scraper ring to float both radially and axially, compensating for any misalignment in the shaft. (read more)
Browse Oil Seals and Grease Seals Datasheets for Zatkoff Seals & Packings -
Hammond’s 1591 series offers a simple, multipurpose plastic housing for a variety of electronics and vertically mounting printed circuit boards via integral card guides. A wide range of sizes and colors are available, with or without mounting flanges, and in flame retardant or economy ABS (read more)
Browse Electronic and Instrument Enclosures Datasheets for Hammond Manufacturing Company Inc. -
gear housings, pipe fittings, adapter ports, fuel injection housings, pump housing, front housing, pump covers, and flange (read more)
Browse Metal Casting Services Datasheets for Impro Industries USA, Inc.
More Information Top
-
AWWA M55 - PE Pipe - Design and Installation
PE flange adapter , 82 .