-
Supplier: GL Communications, Inc.
Description: The characteristics of satellite communications such as Variable channel, Propagation Delay, and Limited Bandwidth, present challenges and opportunities for the service providers. Effective test tools are required for monitoring, analysis, troubleshooting and management satcom networks
- Frequency: 2 to 15 GHz
- Product Category: Other
-
Supplier: ValueTronics International, Inc.
Description: The SI4015 is a communication analyzer from WaveTek. A communication analyzer is a superior type of electronic test equipment for physical layer, circuit, and new technology testing. Anyone in the business of testing data networks can use a communication analyzer for the
-
Supplier: ValueTronics International, Inc.
Description: The 8922A is a communication analyzer from Agilent. A communication analyzer is a superior type of electronic test equipment for physical layer, circuit, and new technology testing. Anyone in the business of testing data networks can use a communication analyzer for the
-
-
Supplier: ValueTronics International, Inc.
Description: The 8920A is a communication analyzer from Agilent. A communication analyzer is a superior type of electronic test equipment for physical layer, circuit, and new technology testing. Anyone in the business of testing data networks can use a communication analyzer for the
-
Supplier: ValueTronics International, Inc.
Description: The 8935 is a communication analyzer from Agilent. A communication analyzer is a superior type of electronic test equipment for physical layer, circuit, and new technology testing. Anyone in the business of testing data networks can use a communication analyzer for the
-
Supplier: AR Modular RF
Description: The Model AR-50 (KMW1035) is a portable, lightweight, fully automatic band-switching RF booster amplifier for multi-band VHF/UHF Tactical Radio equipment employing legacy, proprietary and emerging waveforms. The amplifier covers the frequency band of 30-512 MHz using six high speed
- Connectors / Interfaces: BNC, TNC, Type N
- Features: Integrated Heatsink
- Frequency: 0.0300 to 0.5120 GHz
- Impedance: 50 Ohms
-
Supplier: AR Modular RF
Description: The Model KAW4040 is a Class AB wideband RF power amplifier system delivering in excess of 500 Watts CW power into a 50-Ohm load over the frequency range of 200 MHz to 500 MHz. Power gain is a minimum of 57 dB. GPIB control requires the optional IEEE488.2/RS232 Interface Controller Module.
- Connectors / Interfaces: BNC, Type N
- Features: Remote Control, Embedded Power Supply
- Frequency: 0.2000 to 0.5000 GHz
- Gain: 57 dB
-
Supplier: AR Modular RF
Description: The Model KAW2040 is a Class AB wideband RF power amplifier delivering in excess of 100 Watts CW power into a 50-Ohm load over the frequency range of 100 MHz to 500 MHz. Power gain is a minimum of 50 dB. GPIB control requires the optional IEEE488.2/RS232 Interface Controller Module.
- Connectors / Interfaces: BNC, Type N
- Features: Remote Control
- Frequency: 0.1000 to 0.5000 GHz
- Gain: 50 dB
-
Supplier: AR Modular RF
Description: The Model KAW2020 is a Class AB wideband RF power amplifier delivering in excess of 100 Watts CW power into a 50-Ohm load over the frequency range of 200 MHz to 500 MHz. Power gain is a minimum of 50 dB. GPIB control requires the optional IEEE488.2/RS232 Interface Controller Module.
- Connectors / Interfaces: BNC, Type N
- Features: Remote Control
- Frequency: 0.2000 to 0.5000 GHz
- Gain: 50 dB
-
Description: assessment, delivery and storage, etc. This document applies to RF flexible coaxial communication cables for use in mobile communication systems, microwave test equipment and other fields. It is read in conjunction with IEC 61196-1:2005.
-
Supplier: Accuris
Description: Italian Language - ELECTRICITY METERING EQUIPMENT - COMMUNICATION WITH END-USER DEVICES PART 3-2: PROTOCOL STACK IN THE RF BAND 169 MHZ
-
Supplier: Semtech Corp.
Description: . Customers worldwide use our wireless RF transceiver IC components for ISM band applications, including automated meter readers, wireless remote control devices, wireless security systems, building automation equipment, and smart lighting systems.
- Bias / Operating Current: 25 to 120 mA
- Data Rate: 0.0180 to 600 kbps
- Device Type: Transceiver
- IC Package Type: Other
-
Supplier: Campbell Scientific, Inc.
Description: This RF modem will continue to be available, but Campbell Scientific recommends the RF500M modem for RF networks that use PakBus dataloggers. The RF95A is used with our RF300-series radios. It provides an RF communication interface between the
- Form Factor: Ceiling / Wall Mount
- Network Media: Wireless
-
Description: IEC 61196-9-1:2023 applies to coaxial communication cables described in IEC 61196-9. It specifies the requirements of flexible coaxial communication cables with solid or semi-air-spaced dielectric and wrap or/and braid outer conductor. These cables are widely used in mobile
-
Supplier: Campbell Scientific, Inc.
Description: distance attainable by the network. The RF310 is programmed by Campbell Scientific to the frequency assigned to you by your Federal Communications Commission (FCC) license. This frequency must be specified at time of order so that it can be programmed into your radios. An RF500M
- Form Factor: Ceiling / Wall Mount
- Network Media: Wireless
-
Supplier: Campbell Scientific, Inc.
Description: distance attainable by the network. The RF313 is programmed by Campbell Scientific to the frequency assigned to you by your Federal Communications Commission (FCC) license. This frequency must be specified at time of order so that it can be programmed into your radios. An RF500M
- Form Factor: Ceiling / Wall Mount
- Network Media: Wireless
-
Supplier: Campbell Scientific, Inc.
Description: distance attainable by the network. The RF312 is programmed by Campbell Scientific to the frequency assigned to you by your Federal Communications Commission (FCC) license. This frequency must be specified at time of order so that it can be programmed into your radios. An RF500M
- Form Factor: Ceiling / Wall Mount
- Network Media: Wireless
-
Supplier: Northrop Grumman Corporation
Description: (Ground CMD) and a Satellite Communications Antenna Interface Unit (SATCOM AIU). The GUI displays the RF Control Bus commands that are received along with the actual hexadecimal data. A timestamp is displayed with every decoded command. RF Control Bus data received by the GUI
- Components / Products Tested: Avionics / Military Electronics
-
Supplier: steute
Description: The Access Points together form the underlying infrastructure of the wireless network. They are responsible for communication with the sensors, bundling all information and directing it towards the Sensor Bridge, which then in turn communicates with the application software. Highlights
- Area Network Type: Wireless Local Area Network (WLAN)
- Equipment Type: Access Points
- Form Factor: Chassis Mount
- Frequency Band: 868 to 917 MHz
-
Description: products and also for consumer equipment. ISO/IEC 18092:2013 specifies, in particular, modulation schemes, codings, transfer speeds, and frame format of the RF interface, as well as initialization schemes and conditions required for data collision control during initialization.
-
Description: modes of Near Field Communication Interface and Protocol (NFCIP-1) to realize a communication network using Near Field Communication devices for networked products and also for consumer equipment. ISO/IEC 18092:2013 specifies, in particular, modulation schemes, codings,
-
Description: of NFCIP-1 to realize a communication network using Near Field Communication (NFC) devices for networked products and for consumer equipment; - a transport protocol including protocol activation and data exchange methods. This document specifies: - modulation schemes; - codings
-
Description: hospital ambulatory and stationary situations. The intent of the guidance document is to be global with respect to wireless spectrum and equipment, although working group participation and expertise have favored detail of scenarios from the US. At the time of this Guidance document several
-
Supplier: DigiKey
Description: Communication Kit RF
-
Supplier: Microwave Photonic Systems, Inc.
Description: The OFW-6700 is a high performance RF/ Fiber Optic Transmission system designed for L-Band and X-Band SATCOM Uplink & Downlink RF transmission applications. The OFW-6700 functions as Dual Band Fiber Optic Interfacility Link when the OFW-6700TX is paired with the OFW-6700RX and
- Connectors / Interfaces: RS485
- Mounting: Rack Mount
- Product Category: Transmitter
- Standards: MIL-STD
-
Supplier: Infineon Technologies AG
Description: Silicon Tuning Diodes Summary of Features Excellent linearity High Q hyperabrupt tuning diode Low series resistance Designed for low tuning voltage operation for VCO's in mobile communications equipment Very low capacitance spread Pb-free (RoHS compliant) package
- Configuration: Single
- IF: 20 mA
- Life Cycle Stage: Other
- Package Type: SOD-323, Other
-
Supplier: Xicom Technology, Inc.
Description: The microprocessor controlled XTC-100D controller provides full remote control and monitoring of Xicom Technology antenna mount TWTAs. The front panel displays the RF power, TWT status, fault logs and operational hours. The controller is compact and requires only one rack unit (1 ¾ inches) of
-
Supplier: Central Technologies
Description: For pc notebooks, portable communication equipment, dc/dc converters
- Applications: Power Inductor
- DCR: 0.0654 ohms
- Inductance Range: 27 microH
- Inductance Type: Fixed
-
Supplier: Bentley Systems, Inc.
Description: Bentley Coax is a robust RF design engineering solution that creates an intelligent coax network model during the design process. Bentley Coax works with Bentley Fiber and Bentley Inside Plant to create an end-to-end network model, allowing an HFC network to be analyzed at any level and
-
Supplier: Infineon Technologies AG
Description: Silicon Tuning Diode Summary of Features High Q hyperabrupt tuning diode Designed for low tuning voltage operation for VCO's in mobile communications equipment High ratio at low reverse voltage Pb-free (RoHS compliant) package
- Diode Type: RF Diodes
- IF: 20 mA
- RoHS Compliant: Yes
- VR: 6 volts
-
Supplier: KRYTAR, Inc.
Description: KRYTAR designs and manufactures extremely rugged RF/Microwave coaxial adapters that find uses in a wide array of wireless communications applications, test equipment, and antenna devices for both commercial and military markets. KRYTAR Coaxial Adapters are available as In Series
- Adapter Style: Straight Jack-Jack, Other
- Adapter Type: Coaxial
- Frequency Range: 0.0 to 67000 MHz
- RF Connector Type: 1.85 mm
-
Supplier: thinkRF
Description: EXTEND YOUR FREQUENCY AND BANDWIDTH PERFORMANCE WITH thinkRF D4000 As new and innovative technologies for wireless communications continue to emerge and push into mmWave 5G bands, you must be able to adapt and enhance the lifetime of your existing RF systems to meet these new
- Connectors: SMA
- Features: RoHS
- Form Factor: Desktop / Tower
- Input Frequency Range: 24000 to 40000 MHz
-
Supplier: thinkRF
Description: analysis platforms from thinkRF increase the likelihood of detection by enabling continuous, 24/7 monitoring of facilities through networked and remotely deployable equipment. High frequency, bandwidth, and sweep performance, combined with integrations with powerful Technical
-
Supplier: CSA Group
Description: modes of Near Field Communication Interface and Protocol (NFCIP-1) to realize a communication network using Near Field Communication devices for networked products and also for consumer equipment. ISO/IEC 18092:2013 specifies, in particular, modulation schemes, codings,
-
Supplier: Richardson RFPD
Description: . The die has backside metallization to facilitate an epoxy die attach process. These switches are ideally suited for satellite and Point-to-Point communications systems, radar systems, radiometers, test and instrumentation equipment and other high frequency applications.
- Actuator Type: SPDT
- Frequency Range: 24000 to 37000 MHz
- Insertion Loss: 0.8000 dB
- Isolation (Port to Port): 28 dB
Find Suppliers by Category Top
Featured Products Top
-
X-ES products are used in a variety of communications applications, such as: IP Routing Spectrum analysis RF communication equipment Intelligent networks Network analysis Packet voice processing 3G infrastructure (read more)
Browse Datasheets for Extreme Engineering Solutions, Inc. (X-ES) -
UIY offers RF isolators covering frequency FM, VHF, UHF, GSM,CDMA,WCDMA,LTE,L.S.C.X band etc. They are coming with low insertion loss, high isolation, and power up to 5000W peak. Application: Military, space and telecom communication etc. (read more)
Browse RF Isolators and RF Circulators Datasheets for UIY Inc. -
, TX. CDM specializes in the authorized distribution of interconnect products and manufacturing engineered cable assembly solutions and is a valued partner to the world’s best-known military contractors, aircraft manufacturers, communications providers and medical diagnostic equipment (read more)
Browse RF and Microwave Connectors Datasheets for CDM Electronics, Inc. -
VCTCXO) Pullability ±9~±15ppm (for VCTCXO) Control Voltage Range 0.90V±0.60V,1.4V±1V PhaseNoise@1kHzOffset -130dBc/Hz Typ. Start-upTime3msMax. Storage Temperature Range -40?~+85? Applications: GPS, RF Wireless communication devices Wireless Module Products (read more)
Browse Oscillators Datasheets for Interquip Electronics Co., Ltd. -
RCN0118NB is a RF coaxial rotary joint, also named high frequency rotary joint, wave guide rotary joint. The channel coaxial rotary joint is conducive to reducing the size of the structure and processing, conducive to stable rotation. It meets the microwave transmission in a wide frequency band (read more)
Browse RF Rotary Joints Datasheets for CENO Electronics Technology Co., Ltd. -
or business airplanes. We will focus on those connectors that deal with RF communications- used to connect antennas to the communication systems of aircraft. Our PIC Avionics RF Connectors are designed and fabricated to meet industry specifications including MIL-C-39012, ARINC 600, ARINC (read more)
Browse RF and Microwave Connectors Datasheets for PIC Wire & Cable -
a spectrum of fantastical applications. Free Space Optical vs Radio Frequency (RF) Communication Due to the limited bandwidth, as well as RF signals’ lack of precise focusability, laser beam-based optical communications have been developed to complement traditional (read more)
Browse Mirror Mounts Datasheets for PI (Physik Instrumente) L.P. -
threats using electromagnetic response: Jamming the communications links between operator and the aircraft Jamming its GPS link Spoofing/take over solution Empower supplies RF and microwave amplifiers for many deployed C-UAS and C-sUAS systems (read more)
Browse RF Amplifiers Datasheets for Richardson RFPD -
, precision equipment interconnections, base station signal transmission, and communication equipment interfaces. Key Features: High Precision Manufacturing: Our connectors are crafted with the utmost precision, achievable only through advanced CNC (read more)
Browse Coaxial Connectors Datasheets for Shenzhen Beike(Bexkom) Electronics Co., Ltd. -
Superior RF performance Environmentally friendly and chromium-free Applications Marine GPS Remote base stations Environmental measurement equipment Search and rescue communications (read more)
Browse RF Amplifiers Datasheets for DigiKey
Conduct Research Top
-
RF Mixer Characterization
, and more accurate processing as well as to translate intermediate frequencies to RF for communication, especially over antennas which are more efficient and smaller at higher frequencies.
-
Factors Influencing RF Module Communication
An RF module is a small electronic device designed for transmission and reception of radio signals between two devices. As the name suggests, these modules operate at radio frequency and transmit signals in the form of electromagnetic energy waves. Transmission through RF Wireless Modules is better
-
Wireless Communication Circuits and Systems
Wireless Communication Circuits and Systems. This new book examines integrated circuits, systems and transceivers for wireless and mobile communications. It covers recent developments in key RF, IF, analogue, mixed-signal components and single-chip transceivers in CMOS technology systematically.
-
Design of High-Speed Communication Circuits
Design of High-Speed Communication Circuits. Summarizing some of the most critical aspects of high-speed analog/RF communications circuits, this book presents some of the newer problems and opportunities offered by the small device geometries and the high levels of integration that is now possible.
-
Application: RF Receivers - Reed Relay
With the continuous worldwide threat of terrorism,. most countries need to be monitoring all electronic communication on a 24/7 basis. Most of this is done with electronic receivers scanning all the RF ranges where potential communication may take place. RF switches are needed to switch from
-
Telecommunication Testing on Relevant RF Components
The telecom industry has undergone rapid development within the past several decades; digital communication methods advancing so much so that require increased bandwidth and frequency coverage. This advancement, in turn, has complicated an RF measurement system's capability to accurately
-
What s Your RF IQ?
Operational Excellence & Lean Six Sigma Ultra low frequency, low frequency and ultra high frequency (UHF). Real Time Locating System (RTLS), active and passive. Active, battery assisted active and passive. Tagging materials that are RF absorbent Tagging materials that are made of metal. Farther
-
High Spur Free Dynamic Range RF Photonic Links allow MIL SATCOM and RF Distribution Networks to Leverage Optical Communication Infrastructure (.pdf)
Radio Frequency (RF) Photonic links have been the focus of researchers since the early 1980's, and the advances in performance capabilities have been continually expanded by innovative industry development of academically proven principles and techniques. The initial introduction of RF Photonic
-
The Radioman's Manual of RF Devices, Principles and Practices
The Radioman's Manual of RF Devices, Principles and Practices. Dealing with the RF aspects of radio communication, this is an indispensable book for anyone involved in land mobile radio, ham radio, marine radio or aviation radio.
-
Common Frequency Band of Satellite Communication (C / Ku / KA band)
UIY Inc. specializes in RF and microwave passive components (RF isolator, circulator, attenuator, coaxial load, filter, etc.), integrating R &D, production, sales and service. The products are widely used in radar, instrument, navigation, microwave communication, mobile communication, space
-
FierceWireless: Advances in RF Front-ends Made 5G Phones Possible
A decade ago, a fundamental change began in the radio frequency (RF) designs of cellular devices that would pave the way for the current sophistication of the RF front-end - the section of a smartphone between the modem and the antenna. The world was going through a momentous transition from
-
Application Guide for Mobile Communication
A reference book to help mobile phone design experts to find the right parts easily for building high-performance RF Front Ends.
-
Optimized FM Tuner Solution
During the past decade, there have been considerable advances in radio frequency (RF) communication circuit design. These advances stem from new RF architectures that were once considered impossible because of low integration, high power consumption and poor process technology. In addition
-
RF Connectors: A Popular Solution for High-Speed Applications
The demand for products that support high-speed connections is ever-expanding. With the latest technology incorporating 5G connections, many communication systems need an upgrade.
-
Designing And Evaluating An NFC-enabled Bio-patch For Medical, Health and Fitness Applications
of the sensor data via on-board ferroelectric random access memory (FRAM) and provides the RF communication link through NFC to a gateway, such as an NFC-enabled smartphone or tablet. The bio-patch can operate with or without a battery power source. Without a battery, the bio-patch is functional when
-
Tactical RF Photonic Communications: Increased Separation Distances Between Personnel and Deployed Antenna Assets (.pdf)
Legacy communication systems present a series of disadvantages to the field deployed operator: Co-Location of Troops, Vehicle and Equipment Assets; Coaxial Copper Cable Distance Limitations; Infrastructure Costs for Repeaters; Size, Weight and Power Burden; Electromagnetic and Radio Frequency