Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Supplier: VAST STOCK CO., LIMITED
Description: Magnetic / Reed Switches SAFETY INTERLOCK TYPE XCS
-
Supplier: VAST STOCK CO., LIMITED
Description: Magnetic / Reed Switches SAFETY INTERLOCK TYPE XCS
-
Supplier: VAST STOCK CO., LIMITED
Description: Magnetic / Reed Switches SHORT MGNTC SAFETY SWITCH CONTACT
-
-
Supplier: VAST STOCK CO., LIMITED
Description: Magnetic / Reed Switches Safety inter, mag rect, 5 m cable
-
Supplier: Standex-Meder Electronics
Description: The MRX Series is an ATEX approved reed relay according to PTB-01 ATEX 2050 U and is used for the galvanic separation of intrinsic safety and non-intrinsic safety circuits. The MRX ATEX approved reed relay is also suitable for circuits of the category “ia” due to its peak
- Break Time (Release Time): 0.1000 milliseconds
- Changeover (CO): 1
- Coil Resistance: 360 to 5580 ohms
- DC Coil Voltage: 5 to 24 volts
-
Supplier: BERNSTEIN AG
Description: Safety slave Coded actuator Switching status indicator AS-i status display Suitable for concealed installation Suitable for harsh environments Non-contact operation gives superior life expectancy M12 connector
-
Supplier: Radwell International
Description: DISCONTINUED BY MANUFACTURER, REED SWITCH, 115 REED, 25VA, N.O, 1 AMP MAX, SJTOW 18/2 20FT, NO ACTUATOR. FREE 2 YEAR RADWELL WARRANTY
-
Supplier: Radwell International
Description: SAFETY INTERLOCK SWITCH, MAGNETIC REED SWITCH, POLYAMIDE ENCLOSURE, 300 MA MAX DC, 2 NORMALLY CLOSED CONTACTS, 300 MA AT 24 VDC, 4 PIN M12 CONNECTOR. FREE 2 YEAR RADWELL WARRANTY
-
Description: IEC TR 62246-3:2018(E) provides basic technical background and experience about reliability data for reed switch-devices applied to machinery systems as well as E/E/PE safety-related control systems during the life cycle phases in general and industrial safety
-
Supplier: Radwell International
Description: ACTUATOR, W/ASSURED OPERATING DISTANCE 3 MM, ORDER NO.: 514110, FOR SAFTEY SWITCH, 2 REED CONTACTS, N/O. FREE 2 YEAR RADWELL WARRANTY
-
Supplier: Accuris
Description: Reed switches Part 3: Reliability data for reed switch-devices in typical safety applications
-
Supplier: Accuris
Description: Reed switches \x96 Part 3: Reliability data for reed switch-devices in typical safety applications
-
Supplier: CSA Group
Description: IEC TR 62246-3:2018(E) provides basic technical background and experience about reliability data for reed switch-devices applied to machinery systems as well as E/E/PE safety-related control systems during the life cycle phases in general and industrial safety
-
Description: IEC 61810-4:2020 applies to electromechanical elementary relays with reed switches (reed contacts) incorporated into general control circuits. It defines the basic functional and safety requirements in all areas of electrical engineering or electronics in accordance with
-
Supplier: Radwell International
Description: SAFETY SENSOR, REED SWITCH, MAGNETIC, SPST-NC, M8 CONNECTOR, 3 PIN. FREE 2 YEAR RADWELL WARRANTY
-
Supplier: steute
Description: Thermoplastic enclosure Long life Reed contacts, coded Actuation from front Switching distance up to 6 mm With pre-wired cable Version with LED lamp available on request Version with higher degree of protection IP 69K available
-
Supplier: steute
Description: Features/Options Ex zone 1 and 21 Thermoplastic enclosure Long life Reed contacts, coded Actuation from front Switching distance up to 6 mm With pre-wired cable Special version only for gas Ex zone 2 and dust Ex zone 22 available N.B.: Please state required approvals for Russia, Brazil
- Features: Explosion Proof
- Maximum Current: 0.1250 amps
- Maximum DC Voltage: 24 volts
- Number of Normally Closed Contacts: 1 to 2
-
Supplier: Oil-Rite Corp.
Description: when lubricant levels become too low. The reed switch for the low level safety is magnetically actuated and normally open. The maximum resistance load is as follows: 120 Volt AC .4A 240 Volt AC .2A 480 Volt AC N/R 24 Volt DC .5A 120 Volt DC .2A 240
- Capacity: 1 gallons
- Delivery Method: Constant Level
- Features: Low Level Safety Switch
-
Supplier: Schmersal Inc.
Description: Connector M12, 8-pole Thermoplastic enclosure Suitable for food processing industry Concealed mounting possible 52 mm x 90 mm x 32 mm Long life no mechanical wear Insensitive to transverse misalignment Insensitive to soiling Coded reed contact safety switch
-
Supplier: Schmersal Inc.
Description: Connector M12, 4-pole Thermoplastic enclosure Suitable for food processing industry Concealed mounting possible 52 mm x 90 mm x 32 mm Long life no mechanical wear Insensitive to transverse misalignment Insensitive to soiling Coded reed contact safety switch
-
Supplier: elobau U.S., Inc.
Description: Safety sensor eloProtect M completely redefines the standard for magnetic safety sensors. The magnetic safety switch offers increased operating distances and offset values for increased flexibility during installation and a high function stability. The new housing is
- Body: Rectangular
- Operating Distance: 0.1575 to 0.3937 inch
- Operating Temperature: -13 to 176 F
-
Supplier: CARLO GAVAZZI Automation Components
Description: CARLO GAVAZZI is excited to introduce its new family of MC88C Sensors to broaden our available housing options for the growing family of MC Safety Magnetic Sensors. The new MC88C Series of magnetically coded REED safety sensors are the ideal solution to monitor the position of
- Maximum AC Voltage: 12 to 24 volts
- Maximum Current: 0.2500 amps
- Maximum DC Voltage: 12 to 24 volts
- Operating Temperature: -13 to 176 F
-
Supplier: RS Components, Ltd.
Description: The Schneider XCS-DMR coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid
-
Supplier: CARLO GAVAZZI Automation Components
Description: CARLO GAVAZZI has launched the MC36C Series Compact Safety Magnetic Sensors, designed for safety-related applications, such as the monitoring of swinging, sliding or removable safety guards, which keep personnel safe from dangerous areas. The MC36C Series of magnetically-coded
- Device Classification: Sensor-Only
- Meter Technology: Mechanical / Magnetic Floats
-
Supplier: RS Components, Ltd.
Description: Non-contact actuation. Magnetic coded sensing. High tolerance to misalignment. 2 N/C reed safety outputs. Switching current: 200 mA @ 24Vdc. IP67 protection rating. Category 1 device per EN 954-1, dual channel contacts suitable for Cat 3 or 4 systems Housing Material = Plastic
-
Supplier: ValueTronics International, Inc.
Description: The 3762 is a switch card from Keithley. Additional Features: Channels Per Card: 10 Contact Configuration: 2 Form A with user selectable shield or driven guard Connector Type: Screw terminals, #16AWG maximum wire size Relay Drive Current: 80
-
Supplier: Clark Solutions
Description: MJ-SDC Multi-Jet Totalizing Water Meter 1", 1-1/2" & 2" With or Without Pulse/Reed Switch Output Description Model MJ-SDC meters are multi-jet, dry type totalizing water meters. They are an ideal choice for a range of municipal, private and
- Liquid Volumetric Flow Rate: 0.7500 to 160 GPM
- Electrical Output: Switch
- End Fittings: Threaded
- Features: Recorder / Totalizer Functions
-
Supplier: Gems Sensors & Controls
Description: most compact package for boiler and steam generators. For added safety, the sensor assembly incorporates redundant reed switches at the actuation level. The LWC-800 Series is ideal for R.O., distilled, or deionized water systems. Optional Features: Power Outage feature allows
- Control Signal Output: Switch / Relay Output
- Control Technique: Limit / Set Point Control
- Form Factor: Circuit Board
- Media: Liquid
-
Supplier: Gems Sensors & Controls
Description: boiler low-water cutoff protection, and offers the most compact internally mounting package for boiler and steam generators. In addition to the low level cutoff switch, the LWC-720 Series includes a high level switch, control logic and relay for pump-up control. For added
- Control Signal Output: Switch / Relay Output
- Control Technique: Limit / Set Point Control
- Form Factor: Circuit Board
- Media: Liquid
-
Supplier: RS Components, Ltd.
Description: Non-contact actuation. Magnetic coded sensing. High tolerance to misalignment. 2 N/C reed safety outputs. Switching current: 200 mA @ 24Vdc. IP67 protection rating. Category 1 device per EN 954-1, dual channel contacts suitable for Cat 3 or 4 systems Accessory Type =
-
Supplier: TiMOTION Technology
Description: 1,000N in a push or pull condition) Minimum installation dimension: Stroke+163mm Color: black or grey IP rating: up to IP66W Certificate: IEC60601-1, ES60601-1, EN60601-1-2, EN 61000-6-1, EN 61000-6-3 Operational temperature range: +5°C~+45°C Options: Safety nut, quick release,
- Actuation Type: Electrical
- Device Type: Rod Type
- Drive Specifications: Lead Screw/ACME Screw, Handwheel/Crank
- Features: Integral Sensor, Magnetic Switch, Self-locking, Water Resistant (Sealed)
-
Supplier: Dexter Magnetic Technologies, Inc.
Description: . Automotive crash safety systems use sensors based on a holding mechanism that can be closed or open using electrical current. Hall Effect sensors vary the output voltage in response to the changes in magnetic field. Reed switches have two overlapping ferromagnetic blades
- Magnet Type: Magnetic Assembly
-
Supplier: Rolair Systems
Description: PUMP DESCRIPTION : Two-Stage, Cast-Iron Cylinders, Aluminum Head and Crankcase for Faster Heat Dissipation, Ball Bearings, Splash Lubricated, Bearing Inserts on Connecting Rods, Swedish Lamellar Reed Valves, Oil Sight Gauge, Low RPM's to Ensure Long Life and Trouble-Free Performance
- Features: Multistage Compressor, 2 Stage, Integral Filter
- Flow Capacity: 10.64 SCFM
- Horse Power: 5 HP
- Lubrication Style: Lubricated
-
Supplier: Atos North America
Description: position them along the cylinder housing. The sensors switch their electric circuit when they detect the permanent magnet integrated into the piston. Thus they can be used to perform motion cycles, operating sequences, fast-slow cycles and safety functions. Bore sizes from 25 to 100 mm
- Body Material: Stainless Steel
- Bore Size: 0.9843 to 3.94 inch
- Cylinder Action: Single
- Cylinder Configuration: Simple
-
Supplier: Harmony Enterprises, Inc.
Description: bale more cardboard in less time and in a smaller space that any other vertical baler on the market. Outstanding Safety Features Standard mechanical safety limit switches have been replaced with the tamper-proof, fail-safe magnetic reed safety switches.
- Applications / Materials Compacted: Cans / Bottles, Recycling
- Bale Weight: 1300 lbs
- Operating Force: 46.18 tons
Find Suppliers by Category Top
Featured Products Top
-
The Series BNS36 coded-magnet sensors are designed for use as a safety interlock switch on movable machine guards/articulating robot arms. Each sensor set consists of a multiple reed switch unit and a coded-magnet actuator. The reed switches, wired in series, will only (read more)
Browse Noncontact Safety Interlock Switches Datasheets for Schmersal Inc. -
The Series BNS260 coded-magnet sensors are designed for use as a safety interlock switch on movable machine guards and articulating robot arms. Each sensor consists of multiple reed switches wired in series which will only close in the presence of the magnetic field array of the matching (read more)
Browse Safety Sensor Switches Datasheets for Schmersal Inc. -
TE offers a diverse portfolio and one of the broadest ranges of of relay types, including automotive high-voltage relays, automotive high-current relays, latching (bi-stable) relays and non-latching (monostable) relays, plug-in relays, high-frequency relays, reed relays, and solid state relays (read more)
Browse Electromechanical Relays Datasheets for Heilind Electronics, Inc. -
neither cause the sensor to come loose, nor will these forces lead to unreliable sensor functioning. Even critical applications over long periods of time are safely under control: all SMT-/SME-10M reed switches are equipped with internal protection circuits to increase service life. Cable quality makes (read more)
Browse Proximity Sensors Datasheets for Festo Corporation
Conduct Research Top
-
SME Capabilities & Solutions - Automotive Transportation Electronics
Standex-Meder reed switches, reed sensors, reed relays, and magnetics are present in millions of operations daily within the transportation industry. With the growth in the number of on-board systems, the increasing number of "smart" features, and the importance of safety and security, convenience
More Information Top
-
Trend of international safety standards
Mechanical 2000 to 2003 • Safety Network • ESP diagnostics • LED Display • Operation terminal • Enable Equipment • Power Reed Switch • Safety Switch • Safety Relay • Safety Plug • Contact for Safety .
Indicates content that may require registration and/or purchase.