0.500" (H) Timing Belts (inch)
from Hangzhou Chinabase Machinery Co., Ltd.
The pitch &tooth type of double sided timing belt is same as synchronous belt. There are two kinds of double sided timing belt - DA type: Arrangement symmetrical ( see section a); DB type: Arrangement overlapping ( see section b) [See More]
- ANSI Pitch: 0.080" (MXL); 0.200" (XL); 0.375" (L); 0.500" (H); 0.875" (XH); 1.250" (XXH)
- Features: Double-Sided
from Hangzhou Chinabase Machinery Co., Ltd.
All specification and types of timing belt can be produced;so do other specification and types. of timing belt not listed in this table. For particular specification belt,we can make according to the clients' supplying drawing or. sample after negotiation. Timing belts' width can be adjusted as... [See More]
- ANSI Pitch: 0.080" (MXL); 0.200" (XL); 0.375" (L); 0.500" (H); 0.875" (XH); 1.250" (XXH); XXL
from Megadyne Americas
Double Sided H .500" pitch timing belts made of Neoprene with Fiberglass reinforcement [See More]
- ANSI Pitch: 0.500" (H)
- Number of Teeth: 48
- Belt Length: 24
- Belt Material: Neoprene
from Habasit America
Category: Open-end Timing Belts - Aramid [See More]
- ANSI Pitch: 0.500" (H)
- Ultimate Tensile Strength: 450
- Belt Width: 1
- Reinforcement: A - Aramid
from Bando American, Inc.
The extra durable, highly flexible neoprene backing provides excellentabrasion and wear resistance — especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt and moisture. Continuous, helically-wound high strength... [See More]
- ANSI Pitch: 0.080" (MXL); 0.200" (XL); 0.375" (L); 0.500" (H); 0.875" (XH); 1.250" (XXH)
- Number of Teeth: 37 to 665
- Belt Width: 0.1250 to 5
- Belt Material: Neoprene
from SKF/Global
Double Sided Timing Belts. Construction details. Tension members: The tension members are made from low stretch glass fibre cords. Rubber cushion: The rubber cushion is made from a chloroprene compound. Tooth wrapping fabric: Polyamide industrial fabric. Features: • Moderately oil-resistant. [See More]
- ANSI Pitch: 0.500" (H)
- Belt Length: 14.5 to 272
- Belt Width: 0.7500 to 17.5
- Number of Teeth: 58 to 1088
from US Timing & Conveyor
Made according to ISO 5296. Trapezoidal shaped tooth. The tooth spacing is (1/2 ”). Useful for product and machine positioning in inches [See More]
- ANSI Pitch: 0.500" (H)
- Belt Material: Polyurethane; 92SHA White TPU
- Number of Teeth: 14 to 18
- Reinforcement: Reinforced; Kevlar® (optional feature); Steel (optional feature); ARAMID, Stainless Steel
from Habasit America
Category: Wide Timing Belts - Aramid [See More]
- ANSI Pitch: 0.500" (H)
- Ultimate Tensile Strength: 2923
- Belt Width: 1
- Reinforcement: A - Aramid