0.080" (MXL) Timing Belts (inch)
from Stock Drive Products & Sterling Instrument - SDP/SI
For power transmission applications, a belt and pulley drive system are one of the most common and cost-effective methods used to transfer motion in a drive system. synchronous timing belts, with their defined pattern and evenly spaced teeth, mate with matching timing belt pulleys and idlers to... [See More]
- ANSI Pitch: 0.080" (MXL)
- Belt Material: Neoprene
- Belt Width: 0.2500
from Hangzhou Chinabase Machinery Co., Ltd.
The pitch &tooth type of double sided timing belt is same as synchronous belt. There are two kinds of double sided timing belt - DA type: Arrangement symmetrical ( see section a); DB type: Arrangement overlapping ( see section b) [See More]
- ANSI Pitch: 0.080" (MXL); 0.200" (XL); 0.375" (L); 0.500" (H); 0.875" (XH); 1.250" (XXH)
- Features: Double-Sided
from Stock Drive Products & Sterling Instrument - SDP/SI
For power transmission applications, a belt and pulley drive system are one of the most common and cost-effective methods used to transfer motion in a drive system. synchronous timing belts, with their defined pattern and evenly spaced teeth, mate with matching timing belt pulleys and idlers to... [See More]
- ANSI Pitch: 0.080" (MXL)
- Belt Material: Polymer Compound
- Belt Width: 0.2500
from Hangzhou Chinabase Machinery Co., Ltd.
All specification and types of timing belt can be produced;so do other specification and types. of timing belt not listed in this table. For particular specification belt,we can make according to the clients' supplying drawing or. sample after negotiation. Timing belts' width can be adjusted as... [See More]
- ANSI Pitch: 0.080" (MXL); 0.200" (XL); 0.375" (L); 0.500" (H); 0.875" (XH); 1.250" (XXH); XXL
from Stock Drive Products & Sterling Instrument - SDP/SI
For power transmission applications, a belt and pulley drive system are one of the most common and cost-effective methods used to transfer motion in a drive system. synchronous timing belts, with their defined pattern and evenly spaced teeth, mate with matching timing belt pulleys and idlers to... [See More]
- ANSI Pitch: 0.080" (MXL)
- Belt Length: 780
- Belt Width: 0.2500
- Belt Material: Neoprene
from Ondrives.US Corporation, formerly Rino Mechanical
Timing belts work with timing pulleys to transmit rotary motion between two parallel shafts. Ondrives.US ’ timing belts provide long working life with quiet operation, and, unlike chains, require no lubrication. We offer timing belts in a variety of profiles and configurations to pair with our... [See More]
- ANSI Pitch: 0.080" (MXL); 0.0816" (40 DP); 0.200" (XL); 0.375" (L); HDT, GT2, T
- Reinforcement: Reinforced; Fiberglass; Kevlar®; Polyester
- Belt Material: Neoprene; Urethane
from Bando American, Inc.
The extra durable, highly flexible neoprene backing provides excellentabrasion and wear resistance — especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt and moisture. Continuous, helically-wound high strength... [See More]
- ANSI Pitch: 0.080" (MXL); 0.200" (XL); 0.375" (L); 0.500" (H); 0.875" (XH); 1.250" (XXH)
- Number of Teeth: 37 to 665
- Belt Width: 0.1250 to 5
- Belt Material: Neoprene
from Megadyne Americas
.080" pitch timing belts made of Neoprene with Fiberglass reinforcement [See More]
- ANSI Pitch: 0.080" (MXL)
- Number of Teeth: 36
- Belt Length: 2.88
- Belt Material: Neoprene
from York Industries, Inc.
We have thousands of belts in stock, and can cut belts in a custom width to your specifications. [See More]
- ANSI Pitch: 0.080" (MXL)
- Belt Length: 2.88 to 95.12
- Belt Width: 0.1250 to 0.2500
- Number of Teeth: 36 to 1189
from York Industries, Inc.
We have thousands of belts in stock, and can cut belts in a custom width to your specifications. [See More]
- ANSI Pitch: 0.080" (MXL)
- Belt Length: 3.2 to 51.84
- Belt Width: 0.1250 to 0.2500
- Number of Teeth: 40 to 648