Neoprene Timing Belts (inch)
from Stock Drive Products & Sterling Instrument - SDP/SI
For power transmission applications, a belt and pulley drive system are one of the most common and cost-effective methods used to transfer motion in a drive system. synchronous timing belts, with their defined pattern and evenly spaced teeth, mate with matching timing belt pulleys and idlers to... [See More]
- Belt Material: Neoprene
- Belt Width: 0.2500
- ANSI Pitch: 0.080" (MXL)
from Stock Drive Products & Sterling Instrument - SDP/SI
For power transmission applications, a belt and pulley drive system are one of the most common and cost-effective methods used to transfer motion in a drive system. synchronous timing belts, with their defined pattern and evenly spaced teeth, mate with matching timing belt pulleys and idlers to... [See More]
- Belt Material: Neoprene
- Belt Width: 0.2500
- ANSI Pitch: 0.080" (MXL)
- Belt Length: 780
from Bando American, Inc.
Synchro-Link ® Double Sided Timing Belts provide smooth, precise performance under exacting drive conditions in serpentine drives common in printing, textile and packaging machinery. BANDO's precision molding process assures "mirror-image" symmetry, so both sides of the belt mesh with the pulley... [See More]
- Belt Material: Neoprene
- Belt Width: 0.2500 to 3
- ANSI Pitch: DXL, DL, DH
- Number of Teeth: 37 to 340
from F.N. Sheppard & Co.
Backings can be applied to outside of Base Belts. F.N. Sheppard would like to assist in the selection and design process. Select the Base Belt and then let us know your application and thoughts, we can then give you suggestions and advise on choosing the Additional... [See More]
- Belt Material: Neoprene
- ANSI Pitch: 0.080" (MXL) (optional feature); 0.0816" (40 DP) (optional feature); 0.200" (XL) (optional feature); 0.375" (L) (optional feature); 0.500" (H) (optional feature); 0.875" (XH) (optional feature); 1.250" (XXH) (optional feature)
from York Industries, Inc.
We have thousands of belts in stock, and can cut belts in a custom width to your specifications. [See More]
- Belt Material: Neoprene
- Belt Width: 0.1250 to 0.2500
- ANSI Pitch: 0.080" (MXL)
- Belt Length: 2.88 to 95.12
from Ondrives.US Corporation, formerly Rino Mechanical
Timing belts work with timing pulleys to transmit rotary motion between two parallel shafts. Ondrives.US ’ timing belts provide long working life with quiet operation, and, unlike chains, require no lubrication. We offer timing belts in a variety of profiles and configurations to pair with our... [See More]
- Belt Material: Neoprene; Urethane
- Reinforcement: Reinforced; Fiberglass; Kevlar®; Polyester
- ANSI Pitch: 0.080" (MXL); 0.0816" (40 DP); 0.200" (XL); 0.375" (L); HDT, GT2, T
from Megadyne Americas
Double Sided H .500" pitch timing belts made of Neoprene with Fiberglass reinforcement [See More]
- Belt Material: Neoprene
- Belt Length: 24
- ANSI Pitch: 0.500" (H)
- Number of Teeth: 48
from Bando American, Inc.
The extra durable, highly flexible neoprene backing provides excellentabrasion and wear resistance — especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt and moisture. Continuous, helically-wound high strength... [See More]
- Belt Material: Neoprene
- Belt Width: 0.1250 to 5
- ANSI Pitch: 0.080" (MXL); 0.200" (XL); 0.375" (L); 0.500" (H); 0.875" (XH); 1.250" (XXH)
- Number of Teeth: 37 to 665
from F.N. Sheppard & Co.
Available with v-guide for self tracking. Available with vacuum holes and vacuum lanes on tooth side [See More]
- Belt Material: Neoprene
- Belt Width: 36
- ANSI Pitch: 0.200" (XL) (optional feature); 0.375" (L) (optional feature); 0.500" (H) (optional feature); 0.875" (XH) (optional feature)
from York Industries, Inc.
We have thousands of belts in stock, and can cut belts in a custom width to your specifications. [See More]
- Belt Material: Neoprene
- Belt Width: 0.2500 to 0.3750
- ANSI Pitch: 0.200" (XL)
- Belt Length: 14 to 34
from F.N. Sheppard & Co.
These belts are manufactured in an endless form for greater strength and longer life compared to spliced (welded belts). Truly endless construction is ideal for power transmission and high tension applications. [See More]
- Belt Material: Neoprene
- Number of Teeth: 25 to 400
- ANSI Pitch: 0.080" (MXL) (optional feature); 0.200" (XL) (optional feature); 0.375" (L) (optional feature); 0.500" (H) (optional feature); 0.875" (XH) (optional feature)
- Reinforcement: Reinforced; Fiberglass
from York Industries, Inc.
We have thousands of belts in stock, and can cut belts in a custom width to your specifications. [See More]
- Belt Material: Neoprene
- Belt Width: 0.2500 to 0.3750
- ANSI Pitch: 0.200" (XL)
- Belt Length: 4.2 to 88.8
from F.N. Sheppard & Co.
These belts are manufactured in an endless form for greater strength and longer life compared to spliced (welded belts). Truly endless construction is ideal for power transmission and high tension applications. [See More]
- Belt Material: Neoprene
- Belt Width: 4
- ANSI Pitch: 0.200" (XL) (optional feature); 0.375" (L) (optional feature); 0.500" (H) (optional feature)
- Features: Open-Ended